Project Server 2013 migration workspace error

Project Server 2013 migration workspace error
Hello all,
I have just completed my Project Server 2010 to 2013 migration. All look OK until I tried using Project Professional 2013 and opening a project with about 25
Users (Enterprise Resource) . Opening took about 7 min. I tried creating a new project with 5 users and still took longer then is should.
I decided to run the below command and I received a lot of errors about missing workspace. Please help if anyone can.
Thank you in advance !!!
Test-SPProjectWebInstance -Identity http://XXXXXXXX.XXXXXX | Format-Table -Wrap -AutoSize | Out-File -FilePath c:\
Rule
TimeStamp Message
Microsoft.Office.Project.Server.HealthRules.ProjectBICenterExistenceHealthRule 4/16/2014 12:05:57 AM
The following ProjectBICenters
have missing lists:
(/projectserver/ProjectBICenter,
Reports).
Microsoft.Office.Project.Server.HealthRules.ProjectWorkspacesExistenceHealthRule 4/16/2014 12:05:58 AM The following projects are
missing the workspace webs: 'cf8f
0345-c4b5-e311-a4d0-0019b93bec52'
, '52babaa6-c4b5-e311-a4d0-0019b9
3bec52', '37ff2ac5-37bc-e311-b0a9
-0019b93bec52', '17fe20c2-38bc-e3
11-b0a9-0019b93bec52', 'b7faad6a-
39bc-e311-b0a9-0019b93bec52', 'c9
a70e95-a3b3-e311-b36f-0019b93bec5
2', 'fdf3c3f9-86ba-e311-b3d2-0019
b93bec52', 'ee95175e-f4bc-43f6-a9
c9-02837b5791bc', '5e2cbc54-4114-
4f24-af05-03e024c85046', 'bfd9e49
5-2a42-405c-9035-04e51f4afb2b', '
e381d24d-e82d-452b-b1ae-04f74e215
fd8', 'b85dc99a-0989-4fe1-af0a-05
c6b9448991', 'f2e1c579-2493-4ffd-
99a0-072b7f5f527f'

All,
Bulk update and post up gradation tasks was completed at time of migration.
I did notice that when opening Project Professional 2013 and unselecting
Load Resource Assignments, everything opens and runs as it should. Not sure why ? So I think for now, I'll run Project Professional 2013 without Load Resource Assignments until I find a fix.
As for (The following projects are missing the workspace webs) error, still getting them.
Thanks all for the Quick Reply's.
JBAE

Similar Messages

Project Server 2013: Set-SPProjectPermissionMode error

Hi,
In our environment, we need to use Project Server permission mode to fine tune permissions. According to documents, we need to run the Set-SPProjectPermissionMode command. However, when I ran it, I got the following error:
Set-SPProjectPermissionMode : There is a version mismatch between the Web server and the content databases, and connections to the data have been blocked to avoid data loss. This can happen when a service pack is not completely installed. Notify your server
administrators so that they can
upgrade the Web server and the databases to the same version. For more information about installing service packs and updates, see the Microsoft Web site (http://go.microsoft.com/fwlink?LinkID=177163).
The linked document does not offer any help. It talks about changes in Project Server 2010, while we're configuring permission mode in Project Server 2013.
Thanks for any information.
By the way, we've installed both SharePoint 2013 SP1 and Project Server 2013 SP1 (currently only one server in the farm). In Central Admin's Upgrade and Migration section, neither the content database nor the service packs (or any other updates) report any
errors.

Hello,
If you go to Central Admin check the following two pages:
Manage Servers in this Farm (in System Settings) - on this page what does the status show for each server in the farm, "Action Required" or "No Action Required". If any action is required, please resolve this before attempting
this PowerShell command again.
Review Database Status (in Upgrade and Migration) - do any of the farm databases status display action required or are they all "No Action Required"? If any of them require action, please resolve this before attempting this PowerShell command
again.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS |
MVP | Downloads

Approvals on Project Server 2013 - An unknown error has occurred

Migrated Project server 2010 to Project server 2013. All the quick launch pages were working after I completed the migration. Started the process of publishing projects and statusing/timesheets to update project.
Now I see "An Unknown Error has occurred".   Tried all my solutions for Project Server 2010 without success.
Event log looks clean.
Has anybody seen and resolved this issue?
Cheers!
Michael Wharton, MBA, PMP, MCT, MCSD, MCSE+I, MCDBA, MCC 2011, MCC2012
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries

We are having the same error with an on-premise install of Project Server 2013. This is the error from the ULS logs.
04/24/2013 06:50:58.90   w3wp.exe (0x18C0)   0x1D0C   Project Server   Task Statusing and Updates   c3bn   High   PWA:https://projects.geocent.com/commsec,
ServiceApp:Project Server Application Service, User:i:0#.w|geocent\john, PSI: System.NullReferenceException: Object reference not set to an instance of an object.     at Microsoft.Office.Project.Server.BusinessLayer.Statusing.StatusApprovalsQueryInfo.AddAllTimesheets(DataTable&
dt, Dictionary`2& timephased, List`1& actualDates)     at Microsoft.Office.Project.Server.BusinessLayer.Statusing.StatusApprovalsQueryInfo.TryLoad(LoadApprovalType method, DataTable& dt, Dictionary`2& timephased, List`1&
actualDates), LogLevelManager Warning-ulsID:0x6333626E has no entities explicitly specified.   c9e7149c-070d-5035-0dca-bda3580b7d07
Not very helpful. Any ideas?

Project Server 2013 - "An unknown error has occured"

Hi !
Whenever I navigate to Project Center in Project Server 2013 the credentials window pops-up continuously even after entering correct admin account and after several clicks on OK button in credential window it says "An unknown error has occurred".
This is happening at every links. Even at Resources, Tasks, Reports, etc.. Is this Project Server 2013 stable or still has bugs in it.
I recently installed March 2013 hotfix for Project Server but still no luck. In ULS or Event Viewer I didn't got any
relevant exceptions.
I am even unable to connect to Project Server from Project Professional.
Thanks & Regards.

"An unknown error has occurred" usually means that the browser cannot resolve some data or something is missing. This can be caused by many issues. One for instance is deleting projects, but timesheets are still referencing it. Many others. This
is one of the harder issues to resolve, because often you don't find anything in the ULS.
Seeing that this error is occurring everywhere on PWA, I would first try rerunning the "SharePoint Product Configuration Wizard". If this fails at any place, that will be the first thing to fix.
Cheers
Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries

Project Server 2013 Configuration Wizard Error

Hi Everyone,
I have installed SharePoint 2013 over Single Server with built in DB. Server
uses Windows Server 2008 & SQL Server 2008. SharePoint installed correctly and it is running well.
Now,
I need to install Project Server 2013, so I installed its required updated, its prerequisites, then installed it. After installation, Configuration wizard started, but it failed with following error info:-
What
is the reason of that error and how to solve this problem?
Thanks
Wa'el Mohsen

That sounds easy enough. Just two questions though:
1) what is 25774? KB? an update?
2) how do I delete it from IIS?
Thank you,

Project Server 2013 - OOB Reports Error

Hi,
I have configured PWA site and I created and published many projects. I'm trying to use the OOB reports but I have the following error when I'm trying to view the report from the PWA but if I opened the report in Excel then refreshed data connections
it will work.
Any idea why it is not working from PWA?
Thanks,

Please configure Secure Store Service in order to open report in WEB.
I think either you are using Report Viewer and report author Group that is why you are able to open report on excel or you are using account which you configured in in excel services. If you will try with any other user account to open excel report then
only accounts which are available in group can view the report.
If you need your users to open reports in Excel client, you must follow the Report Authors configuration.
Secure Store is only used by Excel Services it means if you want to open excel report on web(IE) then you must
configure Secure store services.
Secure store service doesn't
talk to the Excel 2010 client.
Report Viewers group configuration only supports use of reports on the web via Excel Services
kirtesh

After Migrating to project server 2013 some of my Mpp are not opening in project professional

After migrating to project server 2013 from 2010. my some of mpp are not opening in project professional.
project professional taking some time and then showing checkin error. There are no logs on project server to this issue.
but you can see these project in project server 2013 without issue. I have also tried the EditLink function. but result is same project professional not able to open. Check in error.

Hello,
Can you try this:
Open one of those Projects in PWA to edit in the browser
make a slight change (new dummy task etc.)
Save and Publish from the web
Close and check in from the web
Wait for the jobs to complete
Open project professional
try and open the same project again from there
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

Project Server 2013 : Edit "In Browser" more than 500 line throws "An unexpected error occurred" Error, something went wrong.

Dear Experts,
I have got Project Server 2013. These projects are migrated from 2007 to 2010 and to 2013. All the functionality working fine as expected, But few schedule got more than 500 lines of Task, We are unable to "Edit" those projects "In Browser".
We have tried in both IE and Chrome, When you try Edit it throws error "Something went wrong, I checked the co relation Id in the logs. I get the below,
02/09/2015 15:08:32.84
w3wp.exe (0x16D8)
0x04EC 0xB217023
ahjqp High
[Forced due to logging gap, cached @ 02/09/2015 15:08:32.70, Original Level: Verbose] SQL connection time: 0.0809460420248942
75f5e79c-783e-a090-5f32-f52e977a9b62
[Forced due to logging gap, cached @ 02/09/2015 15:08:32.85, Original Level: Verbose] The SecurityTokenServiceHeaderInfo including the correlation ID was added.
Batch request was created without a batch name, specify a batch name for better telemetry.
at System.Environment.GetStackTrace(Exception e, Boolean needFileInfo)
at System.Environment.get_StackTrace()
at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.GetSqlBatchRequest(String batchName) .....
[Forced due to logging gap, cached @ 02/09/2015 15:08:33.89, Original Level: VerboseEx] PWA:, ServiceApp:Project Server Service Application...
the above error repeated more than 100 times
Same thing goes to the below error also
Entering Function=TTaskTable::GetElemProp DynamicLogging triggered SessionID = {EE8AD295-E5AD-E411-943A-005056A95E5E}
Leaving Function=TTaskTable::GetElemProp returning HRESULT:8C010003 SessionID = {EE8AD295-E5AD-E411-943A-005056A95E5E}I really appreciate and thank for
the support. Thanks
Jacob Michael

Hi Jacob,
Have you tried re-publishing the projects from MS Project and see if that helps?
500 tasks are quite a lot for the browser to deal with; I usually recommend switching to MS Project when you have that number of tasks for a project
Paul

Error while creating a Timesheet - Project Server 2013

Hi everyone,
One of user of PWA encounters an issue when he tries to create a timesheet. This error only occurs with a timesheet of
a specific period, he can create all the other timesheet.
So, when he creates the timesheet, this error occurs : "The timesheet creation failed, because of problems with Project Web App or with data validations"
After reloaded the list of the timesheets, a link to go to the specific timesheet
is available but if we click on it, we have this error :
"View Failue - The view failed to load"
I think , this error occurs
because the timesheet is not realy existing even if we have a link to it.
In the log (full log at the end), I've got this error :
Exception occured in method 'TimeSheet.CreateTimesheet' System.ArgumentException: These columns don't currently have unique values.
I've found this link with the same kind of problem :
http://social.technet.microsoft.com/Forums/projectserver/en-US/b0a92afc-11fc-40ef-9a44-357d953b31f6/unable-to-open-or-create-timesheets-these-columns-dont-currently-have-unique-values?forum=projectserver2010general but I've checked and published all the
user project but still have the error.
Have you got any idea where are these columns ? How can I found them without checked every project of PWA ?
Thanks,
Patmol
Full logs, for information :
[bucketHash:E3B9DED0] Exception occured in method 'TimeSheet.CreateTimesheet' System.ArgumentException: These columns don't currently have unique values. at System.Data.ConstraintCollection.AddUniqueConstraint(UniqueConstraint constraint) at System.Data.ConstraintCollection.Add(Constraint constraint, Boolean addUniqueWhenAddingForeign) at System.Data.DataTable.set_PrimaryKey(DataColumn[] value) at Microsoft.Office.Project.Server.DataAccessLayer.Generated.TimesheetDalBase.ReadCustomFieldsForAssignments(ISet`1 assignmentUids) at Microsoft.Office.Project.Server.BusinessLayer.Timesheet.ImportCustomFields(HashSet`1 assignmentUids) at Microsoft.Office.Project.Server.BusinessLayer.Timesheet.ImportActualsAndCustomFields(IEnumerable`1 assignmentUids, ISet`1 userImported) at Microsoft.Office.Project.Server.BusinessLayer.TimesheetLoaderForGrid.Load() at Microsoft.Office.Project.Server.BusinessLayer.TimeSheet.CreateTimesheet(TimesheetDataSet dsDelta, PreloadType preloadType) at Microsoft.Office.Project.Server.Wcf.Implementation.TimeSheetImpl.<>c__DisplayClass45.<CreateTimesheet>b__44() at Microsoft.Office.Project.Server.Wcf.Implementation.WcfMethodInvocation.InvokeBusinessObjectMethod(String businessObjectName, String methodName, IEnumerable`1 actions) StackTrace: at Microsoft.Office.Project.Server.Native.dll: (sig=6ea170d1-988e-4153-9f1d-0305c0ea0309|2|microsoft.office.project.server.native.pdb, offset=3C1E) at Microsoft.Office.Project.Server.Native.dll: (offset=1255D)
Watson bucket parameters: Microsoft Project Server 2013, ULSException14, 070f6ea0 "project server", 0f0011db "15.0.4571.0", ea364808 "system.data", 0400766f "4.0.30319.0", 52310bef "thu sep 12 02:33:51 2013", 00000e02 "00000e02", 00000020 "00000020", 44395864 "argumentexception", 00101621 "aeby7"
Error is: GeneralUnhandledException. Details: General Unhandled Exception in _TimeSheet.CreateTimesheet_ Attributes: System.ArgumentException: These columns don't currently have unique values. at System.Data.ConstraintCollection.AddUniqueConstraint(UniqueConstraint constraint) at System.Data.ConstraintCollection.Add(Constraint constraint, Boolean addUniqueWhenAddingForeign) at System.Data.DataTable.set_PrimaryKey(DataColumn[] value) at Microsoft.Office.Project.Server.DataAccessLayer.Generated.TimesheetDalBase.ReadCustomFieldsForAssignments(ISet`1 assignmentUids) at Microsoft.Office.Project.Server.BusinessLayer.Timesheet.ImportCustomFields(HashSet`1 assignmentUids) at Microsoft.Office.Project.Server.BusinessLayer.Timesheet.ImportActualsAndCustomFields(IEnumerable`1 assignmentUids, ISet`1 userImported) at Microsoft.Office.Project.Server.BusinessLayer.TimesheetLoaderForGrid.Load() at Microsoft.Office.Project.Server.BusinessLayer.TimeSheet.CreateTimesheet(TimesheetDataSet dsDelta, PreloadType preloadType) at Microsoft.Office.Project.Server.Wcf.Implementation.TimeSheetImpl.<>c__DisplayClass45.<CreateTimesheet>b__44() at Microsoft.Office.Project.Server.Wcf.Implementation.WcfMethodInvocation.InvokeBusinessObjectMethod(String businessObjectName, String methodName, IEnumerable`1 actions) . Standard Information: PSI Entry Point: Project User: i:0#.w|wavenet\cev Correlation Id: 9709e41b-9a18-e411-941e-00155d029b05 PWA Site URL: http://intranet.wavenet.lan/PWA SA Name: Project Server Application PSError: GeneralUnhandledException (42), LogLeve...

Hi Patmol,
Have you tried to go to the previous or next timesheet and then navigate with the "previous period" or "next period" to the timesheet in question.
Also have you tried to open it using a delegation session?
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Error while installing MS Project Server 2013(trial) on Sharepoint 2013(CAL)

My problem is that I get the following error:
trial editions and licensed editions of SharePoint, Project Server, and Office Web Apps products may not be installed on the same server
when I try to install MS Project Server 2013(180 days-evaluation) over a Sharepoint 2013(MAPS license).
What does exactly this error say?
Do I need to have Sharepoint and MS Project Server with same type of license?
If so, I suppose I'll have to remove Sharepoint(MAPS) and install a 180 days-evaluation Sharepoint. Will this re-installation be acceptable or I'll get some license type incompatibility issues?

Hello. You are correct, you will need to have the same license types either both trials or both licensed. Uninstalling/ reinstalling with trials should work fine or build another trial farm. Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS |
MVP | Downloads

Error when create a project in newly Enabled features for Project Web App site collection in Project Server 2013

I Enable the Project Web App site collection features in Project Server 2013 based on
http://technet.microsoft.com/en-us/library/jj200305.aspx
when i try to create a project i get error "GeneralUnhandledException"
Yasser

Also, after you provisioned PWA, are you able to get to the server settings? Did you do any configurations with PWA or using the defaults?
Are you trying to add the project using the FarmAdmin account or did you add yourself as a resource with project manager role?
Cheers!
Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries

Saving Error in Project Server 2013, Need Help!

Hey All,
I am running into issues with a Projects saving from Project Pro 2013 to our Project Server 2013 Farm.
It is strange, when someone tries to save a project out of Project Pro 2013 to Project Server, it will run through the "Synchronizing Data to the Server", and then bombs out with error
Job Type: Save
Error ID:9000(0x2328)
The project could not be saved to the server, Etc..
My understanding is that this is a generic save error that could mean many things.
In the ULS logs under "Active Cache Save" , I am getting:
"Cancelling correlation 1339927b-e9e5-e311-941d-00155d2bc10d as save is an overwrite or resubmit"
What is strange at this point is if I check the project back in, and re-open/re-checkout the project, and try to save again, it is successful in saving.
Just a few details about the environment:
Project Server Version: 2013 RTM (In the process of upgrading)
SharePoint Version: 2013 RTM (In the process of upgrading)
Project Structure: One Master Project with all other projects being subprojects of the master
Published Status: All Published
SQL Version: SQL Server 2012 SP1
User Count: About 5 currently
Deployment: 1 WFE, 1 APP Server, 1 SQL Server
It is just odd, as it seems to be completely random. We have tried clearing caches out to see if that resolves it but it did not. It is just odd that it takes two saves for it to actually work correctly, and is problematic as the many times they are saving
from the master and it bombs out there.
I am not sure how it could be an issue as it is usually just a single user working on the individual subprojects.
Maybe it is an issue in the RTM? I couldn't find any info in any of the CU's or SP's that addresses this directly
Has anyone seen this, or have any suggestions?
MS Support has not been any help at all.
Thanks all

I have heard of issues with Master and Sub-Projects and both being published to Project Server, as a rule it is a feature I learnt to avoid as a result of bad experiences with earlier versions of Project Server.
Whilst this will not resolve the issue you have encountered the following suggestion may help you avoid pain in the future and leverages the potential of Project Server to represent common attributes for projects.
Typically a Master/Sub Project environment is intended to reflect projects that are commonly aligned - it is not unusual for a Master Project to represent a programme and for there to be multiple sub-projects forming the programme - there can be programme
level events that have multiple predecessors from multiple sub-projects.
Rather than create a master and sub-project situation I would suggest looking to define two Enterprise Custom Project fields to assist with such situations. The first being a Project Field called Programme that has a look up table with a list of current
programmes you can select from. The second Project Field would be a Programme Status Field with an associated lookup table with 3 values, Master, Sub-Project, Standalone.
You can have a project represent the Master (Programme) project and open it and all sub-projects in the programme (albeit this would have to be a one by one action to begin with). With all the projects open go and open a New Window in Project Professional
and elect to include all the open projects in the new window - this will create a new project with all the selected projects showing as
"embedded objects" and then create dependencies from sub-projects to programme level events in the Master Project (I would suggest what I call
"one way traffic" when creating "cross project dependencies" to avoid further headaches). Close the project, you will be prompted to save changes which you should do but do not save the new window
"container" project. The dependencies across the projects will persist - in each project you will be able to see external successors - tasks in the master project. In the master project you will be able to see external predecessors.
In PWA you can create Project Centre Programme views that filter to exclude projects that ARE Standalone and group them by Programme and sort by Programme Status Field - this will ensure that the "Master" sits at the top of the pile for each programme grouping.
Just a suggestion - I hope the issue you have encountered is resolved soon.
Dominic Moss | MAPM Microsoft Certified Technology Specialist | Our Newsletter:
PM News Project Server Specialists
Project Server PRIME | Twitter:
@Twitter | Facebook:
@Facebook | Linkedin:
Wellingtone

When attempting to edit a project in the PWA I receive the error: 'An error occurred while opening your project. Give us a few minutes and try again...' Project Server 2013

Hello,
I am hoping someone can assist with the error we are encountering when trying to edit a project from the PWA in Project Server 2013. I can click on the project name and go to the detail page and I can
click and see the schedule. However, if I click on a task in the schedule and attempt to edit it, I receive the following error:
'An error occurred while opening your project. Give us a few minutes and try again. If this happens again, contact your administrator.'
At this point I must click cancel twice to get rid of the error pop-up message. At this point, I am no longer able to look
at the schedule of the project either. Can someone assist with this issue?
Thanks

Hi antonio,
In addition to Phani's advice, which version of IE are you using?
Can you reproduce the issue on another mahcine and with another browser?
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Project Server 2013: QueueUpdateProject2 fails with LookupTableItemInvalidLookupTable error

Hi,
We have a strange problem here using the newly introduced QueueUpdateProject2 PSI method in WebSvcProject. The server is running version 15.0.4481.1005 (Project Server 2013, March 2013 PU). Here's the minimum repro code:
projectService.CheckOutProject(projectUid, sessionUid, sessionDescription);
var projectDataSet = projectService.ReadProject(projectUid, DataStoreEnum.WorkingStore);
projectDataSet.Project[0].SetModified(); // Simplest repro
var jobUid = Guid.NewGuid();
projectService.QueueUpdateProject2(jobUid, sessionUid, projectDataSet, false);
Unfortunately the QueueUpdateProject2 queue job always fails with error LookupTableItemInvalidLookupTable for this project. Here's the full error information as shown in PWA:
LookupTableItemInvalidLookupTable for lookup table value b99b7782-924c-e311-9404-00155d027b07:
LookupTableItemInvalidLookupTable (11073). Details: id='11073' name='LookupTableItemInvalidLookupTable' uid='b1c62182-924c-e311-9404-00155d027b07'.
Queue:
GeneralQueueJobFailed (26000) - ProjectUpdate.ProjectUpdate2Message. Details: id='26000' name='GeneralQueueJobFailed' uid='b020bf82-924c-e311-9404-00155d027b07' JobUID='f294b911-f500-45bc-91ec-a493bdf3d07a' ComputerName='1beb2ff2-5dc9-4136-aa24-1c2be86c5768'
GroupType='ProjectUpdate' MessageType='ProjectUpdate2Message' MessageId='2' Stage='' CorrelationUID='ce4e569c-0aa5-70d6-c576-8b3b764d14f1'. For more details, check the ULS logs on machine
1beb2ff2-5dc9-4136-aa24-1c2be86c5768 for entries with JobUID
f294b911-f500-45bc-91ec-a493bdf3d07a.
Here are some corresponding entries from the ULS log:
11/13/2013 19:36:30.82 Microsoft.Office.Project.Server (0x06D0) 0x1E60 Project Server                Active Cache Save
myzo Medium Error is: LookupTableItemInvalidLookupTable. Details: LookupTableItemInvalidLookupTable for lookup table value b99b7782-924c-e311-9404-00155d027b07 . Standard Information: , LogLevelManager Warning-ulsID:0x6D797A6F has no
entities explicitly specified. ce4e569c-0aa5-70d6-c576-8b3b764d14f1
11/13/2013 19:36:30.82 Microsoft.Office.Project.Server (0x06D0) 0x1E60 Project Server                Active Cache Save
4zbp Monitorable PWA:, ServiceApp:Project Server Service Application, User:i:0#.w|my\account, PSI: [TrackingId:fa790381-924c-e311-9404-00155d027b07][ResourceId:3222f5b7-c13b-e311-9404-00155d027b07][SessionGuid:db83645c-50e1-4368-a59f-94df13ff7d5e][SessionDescr:][JobGuid:af20bf82-924c-e311-9404-00155d027b07][ProjectGuid:81a4a757-c446-e311-9404-00155d027b07][PS_AC][400]
Microsoft.Office.Project.Server.BusinessLayer.WinProjUtility.WinProjException: LookupTableItemInvalidLookupTable for lookup table value b99b7782-924c-e311-9404-00155d027b07     at Microsoft.Office.Project.Server.BusinessLayer.WinProjUtility.P12Deserializer.PostReadRow(P12ContainerHeader
cntrHeader, Row row)     at Microsoft.Office.Project.Server.BusinessLayer.WinProj.SaveProjectInternal(Guid projGuid, String projName, Int32 projType, Boolean ... ce4e569c-0aa5-70d6-c576-8b3b764d14f1
11/13/2013 19:36:30.82* Microsoft.Office.Project.Server (0x06D0) 0x1E60 Project Server                Active Cache Save
4zbp Monitorable ...isNewProj, Guid jobGuid, Guid sessionGuid, Guid checkOutByResUid, String sessionDescr, Boolean isFirstPacket, Boolean isLastPacket, String newVersionStamp, Int16 dataFormatVersion, Boolean isDataCompressed, Byte[] projectData,
String winprojBuildNumber, ACProcessorType acProcType), LogLevelManager Warning-ulsID:0x347A6270 has no entities explicitly specified. ce4e569c-0aa5-70d6-c576-8b3b764d14f1
We would be happy to provide more information if needed. Project Professional can open and save the project just fine, so it seems to be unrelated to other forum posts (1, 2).
Has anybody seen this before? Any hints on where to search or what to look for?
Thanks,
Thomas
TPG The Project Group
[1] http://social.technet.microsoft.com/Forums/projectserver/en-US/da3c0d64-1ced-45dd-ace6-ce821fd1c362/what-are-the-lookup-fields-in-the-local-project-cant-publish-project-to-the-server
[2] http://answers.microsoft.com/en-us/office/forum/office_2010-project/error-110730x2b41-importsave-to-project-server/03fd792f-4451-4512-ac0b-ddad946c3e3

Just to clarify, I get these errors in the ULS logs:
06-11-2014 14:15:02.42        w3wp.exe (0x23AC)        0x23E0        Project
Server        Active Cache Save        myzo        Medium        Error is: LookupTableItemInvalidLookupTable.
Details: LookupTableItemInvalidLookupTable for lookup table value 440c1ce7-61f1-e311-944d-00155de84b1a . Standard Information: PSI Entry Point: Project User: i:0#.w|africa\spsetupdev Correlation Id: f6a91701-62f1-e311-944d-00155de84b1a PWA Site URL:
http://epmdev.af.didata.local/PWA SA Name: SharePoint_EPM_Dev_ProjectServerService PSError: LookupTableItemInvalidLookupTable (11073), LogLevelManager Warning-ulsID:0x6D797A6F has no entities explicitly specified.        72d0999c-429e-80e4-4f95-1037e3c788ff
06-11-2014 14:15:02.42        w3wp.exe (0x23AC)        0x23E0        Project
Server        Active Cache Save        4zbp        Monitorable        PWA:http://epmdev.af.didata.local/PWA,
ServiceApp:SharePoint_EPM_Dev_ProjectServerService, User:i:0#.w|africa\spsetupdev, PSI: [TrackingId:f6a91701-62f1-e311-944d-00155de84b1a][ResourceId:f6760993-7a33-47ef-8cea-0c9cc5231ae7][SessionGuid:6c189001-cd9e-e311-9426-00155d879c00][SessionDescr:ZABRYSVEPMD01\Dev
PWA][JobGuid:d3e31201-62f1-e311-944d-00155de84b1a][ProjectGuid:7537ccc0-7692-4456-93dd-fc7adcb5d1c8][PS_AC][807] Microsoft.Office.Project.Server.BusinessLayer.WinProjUtility.WinProjException: LookupTableItemInvalidLookupTable for lookup table value 440c1ce7-61f1-e311-944d-00155de84b1a
at Microsoft.Office.Project.Server.BusinessLayer.WinProjUtility.P12Deserializer.PostReadRow(P12ContainerHeader cntrHeader, Row row)     at Microsoft.Office.Project.Server.BusinessLayer.WinProj.SaveProjectInternal(Guid projGuid, String projName,
Int32 projType, Boolean isNewProj, Guid jobGuid, Guid sessionGuid, Guid checkOutByResUid, String sessionDescr, Boolean isFirstPacket, Boolean isLastPacket, String newVersionStamp, Int16 dataFormatVersion, Boolean isDataCompressed, Byte[] projectData, String
winprojBuildNumber, ACProcessorType acProcType), LogLevelManager Warning-ulsID:0x347A6270 has no entities explicitly specified.        72d0999c-429e-80e4-4f95-1037e3c788ff
And in addition to that, we get the Error 9000 when saving in MSP.
Still downloading the files, but the more and more I look at it I'm hopeful this will solve our problem.
http://blogs.umtsa.co.za/nicoo

Project Server 2013 OLAP cube build error

When I try to build the OLAP cube I receive the below error:
[2/26/2014 12:36 PM] Failed to build the OLAP cubes. Error: The attempt to build the OLAP database on server SQL_Server_Name failed, the SQL Server Analysis Services Analysis Management Objects (AMO) client software may not be installed on this server, please
install/update the client on this server and retry. The underlying exception was: Could not load file or assembly 'Microsoft.AnalysisServices, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot
find the file specified.
I did some search and found that Analysis Management Objects (AMO) client software is not installed on my servers, I downloaded and installed the AMO client software , restarted the Project Server Service application to the 4 Servers. I rebooted the
4 servers, tried to build the cube, but I got the same error. I checked the assembly on the 4 servers and they contain the dll Microsoft.AnalysisServices.
Any help?
I read that AMO client software tools must be installed during the farm setup, after installing the SharePoint Prerequisites and before installing SharePoint. Is that correct?

Hello,
Even with SQL 2012, the 2008 SQL AMO component is required on the Project Server servers. See the post from Brian for more details:
http://blogs.msdn.com/b/brismith/archive/2012/11/12/project-server-2013-requirements-to-build-an-olap-cube.aspx
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

Project Server 2013 migration workspace error

Similar Messages

Maybe you are looking for