Project Server 2013 on premises Project Archiving not happening

Dear All
I have a small problem, in that my overnight jobs are not kicking off. Things like the Scheduled Project Backups and the OLAP cube. The cube builds ok if I do it manually, it just doesn't even start overnight.
I've had a look in the Time Job Status page in Sharepoint, but simply can't see anything there that indicates there is a scheduled job for the backups or the archive. Nothing appears to be failing, it's just not there.
If anyone has any ideas I'd very much appreciate it.
John.

Hi Paul
I used one of my calls with MS for this in the end, and after much checking and deliberating they came up with the same solution as you did. Thought you'd like to know.
The actual issue was that my PWA instance had no WebAppUsername account against it, quite how I managed to do that I don't know. The following Sharepoint Powershell commands identified that little problem.
$serviceapp = get-spserviceapplication | ? {$_.TypeName –like “*Project*”}
$pwainstances = $serviceapp.Sitecollection
$pwainstances
The final command prints out a table of information for each PWA instance, thought it might be useful for someone if they experience a similar problem.
John.

Similar Messages

Project Server 2013: customize JSGrid (Project Center, MyTasks, etc...) ?

Hi,
In Project Server 2010, it was possible to customize the JSGrid, thanks to the tutorial included in the SDK "Walkthrough:
Customizing the PWA Ribbon and Accessing the JS Grid". It works really fine, and I used this possibility in many Project Server 2010 implementation for Customer.
I would like to make it on Project Server 2013, but the same code doesn't work. I found some posts
here, where people had the same issue, but no clear answer.
The Project Server 2013 SDK does not contain the same tuto upgraded for 2013, and I hope that this possibility still exists.
If somebody has a very basic example to show how to execute some custom code on Focus Change event, or clic, or what ever event happening on this JSGrid, it would be very nice to share.
My installation is On Premise, not in On Line.
Thank you for your help !
Sylvain

Hi,
In fact for filtering, you have to use delegate.
The "HandleFilter" function must be created by you. You have to bind this function to the correct delegate.
For filtering, the main delegates are:
SP.JsGrid.DelegateType.AutoFilter
SP.JsGrid.DelegateType.LaunchFilterDialog
SP.JsGrid.DelegateType.GetAutoFilterEntries
The post
here explains the process for 2010. For Project Server 2013, the difference is that we don't have the same objects.
Here you can find the way to declare the delegate in Project Server 2013, with the SetDelegate method:
var pc; // Contains the Project Center extension object.
var JsGridControlInstance;
var JsGridSatellite;
_spBodyOnLoadFunctionNames.push("ProjectCenterMain");
function ProjectCenterMain() {
pc = new ProjectCenterExtension();
function ProjectCenterExtension() {
if (typeof projectCenterComponent === 'undefined')
return;
JsGridSatellite = projectCenterComponent.get_GridSatellite();
JsGridControlInstance = projectCenterComponent.get_GridSatellite().GetJsGridControlInstance();
JsGridSatellite.get_tableViewParameters().bAutoFilterableColumns = true;
JsGridControlInstance.SetDelegate(SP.JsGrid.DelegateType.AutoFilter, HandleFilter);
JsGridControlInstance.SetDelegate(SP.JsGrid.DelegateType.LaunchFilterDialog, FilterDialog);
JsGridControlInstance.SetDelegate(SP.JsGrid.DelegateType.GetAutoFilterEntries, FilterMenu);
function HandleFilter(newState) {
alert("Filter !");
function FilterDialog(param) {
alert("FilterDialog !");
function FilterMenu(param) {
alert("FilterMenu !");
My advice to search, is to put a break point on the ProjectCenterExtension function, and through debugger, tou can drill down in the main methods and properties.
Often you will see functions with get_XYZ(), and then be able to make the matching with the Project Server 2010 syntax.
For the filtering implementation, I beleive that you can deal with your article based on 2010: it should work as soon as you will get the equivalent objects in 2013.
Hope it helps !
Sylvain

Project Server 2013 - Cannot see project schedule in PWA

Project Server 2013 and Project Pro 2013
I have admin authority but for some of the projects loaded to the server, and published, i cannot see the Schedule option in the left frame. At least on project has this option available but several others do not. For the projects where I can't see the schedules:
- Some of these projects were created with imported MPP files from Project 2010, and imported using the wizard,
- Some were created with imported XML files from Project 2010, and imported using the wizard
- Some were created with Project Pro 2013 and saved, published to the P13 server.
Are there some obvious things that I should check as a new admin to this version of Project Server? I'm stumped.
For all of the above projects (with the issue or not) I can succesfully see everything in Project Professional 2013, and everything seems to function normally in the publish process.

Hi,
the first thing to check would be the EPT (Enterprise Project Type) of those projects. Go to server settings, Enterprise Project Types, select the appropriate project type and ensure that the Schedule page is on the left side of the section "New Project
Page/Project Detail Pages".
Hope this helps,
Guillaume Rouyre, MBA, MVP, MCP |

Project Server 2013 SSRS with Project Site

Hi All,
We are using Project Server 2013. We have developed a SSRS report by accessing Project Site lists. It was working fine for some time, now when we try to access the report it is showing loading. The data source itself is not working, we used http://<servername>/PWA
as URL for the data source . The reports developed without Project Site list are working fine.
After 5 to 10 minutes it is showing the below error.
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for dataset 'dtRisk'. (rsErrorExecutingCommand)
An error occurred when accessing the specified SharePoint list. The connection string might not be valid. Verify that the connection string is correct. (rsSPDataProviderError)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
When we try to test the datasource connecting string, after 5 minutes showing the below error.
An error occurred when accessing the specified SharePoint list. The connection string might not be valid. Verify that the connection string is correct. (rsSPDataProviderError) Get Online Help For more information about this error navigate to the report server
on the local server machine, or enable remote errors
Below connection setings
Thanks in advance , Taj

Hi Taj,
Your list is in PWA? is a global list?, if not, try to make a connection with http://server/PWA/SiteProject may this can resolve, because when you do some DS with a SPList, your need to stablish that connection directly at site path where you have the list.
I hope this help
Ray

Matching resources based on skill profile (Project Server 2013 Online and Project Pro 2013)

Hey gang,
Has anyone seen any reported bugs surronding the resource matching feautre in Project 2013 (On-Line)?
I have done this before, so I know how this works. In fact, I get different results when I try the Match button in Project Professional 2013 (on premise), versus when I try to use it via Build Team from Enterprise in PWA Project Details. i.e.,
when setting up the custom enterprise resource field for matching I have selecting the option to use this field for matching, then I populated my resources' profile with a value accrodingly.
Also noted that I do not see the matching button when using the Build Team from Enterprise for Resource plans, is this normal?
Thanks in advance,
\Spiro Theopoulos PMP, MCITP. Montreal, QC (Canada)

Hi Spiro,
I didn't have a chance to test it. Nevertheless I can confirm that at least for PS2010, the "match" feature was not available for the resource plan "build team". In my point of view, that makes sense since the resource plan is not intended to micro-manage
activities but more for planning generic skills demand.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Project Server 2013, cannot open project plan in pwa

I have a clean installation of Project Server 2013 and am able to save project plans, send assignments and receive task updates.
The one error so far i'm running into is when I try to open any project plan from PWA - I get the following error:
"we couldn't find the project detail page for this project. see the system administrator."
Can someone assist in resolving this issue?
Thank you,
Damon Curtin | New Signature

Damon,
Navigate to Project Web App>>PWA Settings
Select Enterprise Project types option from "Workflow and Project Details Pages" section
Validate "available project details page section" by default schedule and project details should be selected in right hand side column, if it is not then add these two pages and click save.
Hrishi Deshpande – Senior Consultant DeltaBahn
Blog | < |
LinkedIn
Please click Mark As Answer; if a post solves your problem or Vote As Helpful if a post has been useful to you.This can be beneficial to other community members reading the thread.

SahrePoint 2013 Server & Project Server 2013 - Notifications and reminders are not received by certain users

Dears,
We have recently implemented MS EPM 2013 where we started to face some strange behavior with the standard alerts and reminders sent from the system.
Minor number of the users (with different levels of privileges from administrators to team members) are receiving emails and alerts normally (either when they are assigned on project schedule tasks or SharePoint list items alerts) without any issues however
the. on the other hand the other majority number of resources are not receiving any kind of alerts from the system (neither from Project Server Nor from SharePoint).
knowing that, all the resources/users have their emails configured properly, and their other attributes are almost the same for all users. all the emails are stored on the same exchange server.
Anyone can help on this please.
Appreciate your cooperation.
Ibrahim Al-Masri Technology Manager at MethodCorp

Thanks Dinesh,
Actually the users have this global permissions configured for them and yet they weren't receiving emails.
We Just could solve this puzzle, all what we needed to do is to configure the
RBS for the majority for the users who weren't receiving emails.
Welcome to EPM 2013 UN-unannounced changes.
Ibrahim Al-Masri Technology Manager at MethodCorp

Workflow in Project server 2013 online not going particular stage after Approval

Hi All,
i have created workflow using sharepoint designer 2013 for project server 2013 online. and i have also set the approver after the first stage. when i create a project using this workflow, project is created successfully and the approval task also go for
a approval to specific user. and i have set the property that after approval it has to go on specific stage. but the problem is when user approve the task it shows approved but my stage in workflow is remain same. it is not going to any stage.
i don't know why this type of problem is occur.
FYI, i have created same workflow for Project server 2013 on premise(Which is installed in my server) and
it is working fine but when i want to deploy this workflow in
project server 2013 online its giving error.
so please help me to solve this type of issue.
Thanks

I am also experiencing issues with this. After the approval task is completed, the Workflow gets cancelled with the following message
RequestorId: 60d96368-4cb4-b059-8086-604972a92e60. Details: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary. at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context)
at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager
bookmarkManager, Location resultLocation)
All other desired workflow actions work as expected. Emails are sent, project is moved from stage to stage, however as soon as the workflow approval task is completed, either Approved or Rejected, the Internal Status is changed to Canceled and the
workflow fails.
What is interesting is when the Approval task is completed, the approver will receive an email notification that the task was CANCELLED or DELETED....
not COMPLETED, which is what would be expected.
Has anyone seen this - any potential resolution?

How to make the 'Finish Date' field Editable in Project server 2013

Hi All,
In Project server 2013 on premises deployment, When I try to create a new enterprise project [Also in case of new custom project type], Only the 'Start Date' field is available. The 'Finish Date' field is by default taking the value of the 'start Date' itself.
I am unable to make this 'Finish Date' field editable.
Any pointers on this would be very helpful,
Thanks
Shanky

Shanky --
When you create a new project in either Microsoft Project Professional or Project Online, the system does not allow you to enter both a Start date and a Finish date for the project. Here is how the software works:
You enter the Start date of the project.
You completely plan the project with tasks, task dependencies, task Durations, and assigning resources to tasks.
Based on the Start date you provide, plus all of the task information, the software calculates the Finish date of the project for you. So, you cannot provide both the Start date and the Finish date, nor is they any way to force the system to allow
you to do this. Hope this helps.
Dale A. Howard [MVP]

Project server 2013 olap database remains in processing state

Hi,
In an attempt to restore the Reporting Database in Project Server 2013, I did an archive and restore of Custom fields. Both of these events were successful, however, the Reporting database refresh kept on hanging in "Waiting to be processed status".
Before this was noticed, the OLAP Database was configured and a build was initiated. Now the status of the PWAOLAPDatabase build just remains in the "Processing..." status. What am I to do here? Thanks!

Hi Jaco,
It seems like your reporting database refresh has failed, so the OLAP DB cannot be generated either. It could be due to a large resource pool.
See reference below:
http://social.technet.microsoft.com/Forums/projectserver/en-US/7ac3bb1b-6621-46f0-a6c5-d9a04f770418/reporting-database-refresh-project-server-2010?forum=projectserver2010general
http://blogs.msdn.com/b/brismith/archive/2011/07/14/project-server-2010-reporting-database-refresh-failing-with-large-resource-pools.aspx
Note also that you can click on "processing" (as per your screenshot) to have the OLAP DB creation log in order to have more information on the status.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Pull large amounts of data using odata, client API and so takes a long time in project server 2013

We are trying to pull large amounts of data in project server 2013 using both client API and odata calls, but it seem to take a long time. How is this done
In project server 2010 we did this creating SQL views in both the reporting database and for list creating a view in the content database. Our IT dept is saying we can't do this anymore. How does a view in Project database or content database create issues?
As long as we don't add a field in the table. So how's one to do this with creating a view?

Hello,
If you are using Project Server 2013 on premise I would recommend using T-SQL against the dbo. schema in the Project Web Database for your reports, this will be far quicker that the APIs. You can create custom objects in the dbo. schema, see the link below:
https://msdn.microsoft.com/en-us/library/office/ee767687.aspx#pj15_Architecture_DAL
It is not supported to query the SharePoint content database directly with T-SQL or add any custom objects to the content database.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS |
MVP | Downloads

Error while creating a Timesheet - Project Server 2013

Hi everyone,
One of user of PWA encounters an issue when he tries to create a timesheet. This error only occurs with a timesheet of
a specific period, he can create all the other timesheet.
So, when he creates the timesheet, this error occurs : "The timesheet creation failed, because of problems with Project Web App or with data validations"
After reloaded the list of the timesheets, a link to go to the specific timesheet
is available but if we click on it, we have this error :
"View Failue - The view failed to load"
I think , this error occurs
because the timesheet is not realy existing even if we have a link to it.
In the log (full log at the end), I've got this error :
Exception occured in method 'TimeSheet.CreateTimesheet' System.ArgumentException: These columns don't currently have unique values.
I've found this link with the same kind of problem :
http://social.technet.microsoft.com/Forums/projectserver/en-US/b0a92afc-11fc-40ef-9a44-357d953b31f6/unable-to-open-or-create-timesheets-these-columns-dont-currently-have-unique-values?forum=projectserver2010general but I've checked and published all the
user project but still have the error.
Have you got any idea where are these columns ? How can I found them without checked every project of PWA ?
Thanks,
Patmol
Full logs, for information :
[bucketHash:E3B9DED0] Exception occured in method 'TimeSheet.CreateTimesheet' System.ArgumentException: These columns don't currently have unique values. at System.Data.ConstraintCollection.AddUniqueConstraint(UniqueConstraint constraint) at System.Data.ConstraintCollection.Add(Constraint constraint, Boolean addUniqueWhenAddingForeign) at System.Data.DataTable.set_PrimaryKey(DataColumn[] value) at Microsoft.Office.Project.Server.DataAccessLayer.Generated.TimesheetDalBase.ReadCustomFieldsForAssignments(ISet`1 assignmentUids) at Microsoft.Office.Project.Server.BusinessLayer.Timesheet.ImportCustomFields(HashSet`1 assignmentUids) at Microsoft.Office.Project.Server.BusinessLayer.Timesheet.ImportActualsAndCustomFields(IEnumerable`1 assignmentUids, ISet`1 userImported) at Microsoft.Office.Project.Server.BusinessLayer.TimesheetLoaderForGrid.Load() at Microsoft.Office.Project.Server.BusinessLayer.TimeSheet.CreateTimesheet(TimesheetDataSet dsDelta, PreloadType preloadType) at Microsoft.Office.Project.Server.Wcf.Implementation.TimeSheetImpl.<>c__DisplayClass45.<CreateTimesheet>b__44() at Microsoft.Office.Project.Server.Wcf.Implementation.WcfMethodInvocation.InvokeBusinessObjectMethod(String businessObjectName, String methodName, IEnumerable`1 actions) StackTrace: at Microsoft.Office.Project.Server.Native.dll: (sig=6ea170d1-988e-4153-9f1d-0305c0ea0309|2|microsoft.office.project.server.native.pdb, offset=3C1E) at Microsoft.Office.Project.Server.Native.dll: (offset=1255D)
Watson bucket parameters: Microsoft Project Server 2013, ULSException14, 070f6ea0 "project server", 0f0011db "15.0.4571.0", ea364808 "system.data", 0400766f "4.0.30319.0", 52310bef "thu sep 12 02:33:51 2013", 00000e02 "00000e02", 00000020 "00000020", 44395864 "argumentexception", 00101621 "aeby7"
Error is: GeneralUnhandledException. Details: General Unhandled Exception in _TimeSheet.CreateTimesheet_ Attributes: System.ArgumentException: These columns don't currently have unique values. at System.Data.ConstraintCollection.AddUniqueConstraint(UniqueConstraint constraint) at System.Data.ConstraintCollection.Add(Constraint constraint, Boolean addUniqueWhenAddingForeign) at System.Data.DataTable.set_PrimaryKey(DataColumn[] value) at Microsoft.Office.Project.Server.DataAccessLayer.Generated.TimesheetDalBase.ReadCustomFieldsForAssignments(ISet`1 assignmentUids) at Microsoft.Office.Project.Server.BusinessLayer.Timesheet.ImportCustomFields(HashSet`1 assignmentUids) at Microsoft.Office.Project.Server.BusinessLayer.Timesheet.ImportActualsAndCustomFields(IEnumerable`1 assignmentUids, ISet`1 userImported) at Microsoft.Office.Project.Server.BusinessLayer.TimesheetLoaderForGrid.Load() at Microsoft.Office.Project.Server.BusinessLayer.TimeSheet.CreateTimesheet(TimesheetDataSet dsDelta, PreloadType preloadType) at Microsoft.Office.Project.Server.Wcf.Implementation.TimeSheetImpl.<>c__DisplayClass45.<CreateTimesheet>b__44() at Microsoft.Office.Project.Server.Wcf.Implementation.WcfMethodInvocation.InvokeBusinessObjectMethod(String businessObjectName, String methodName, IEnumerable`1 actions) . Standard Information: PSI Entry Point: Project User: i:0#.w|wavenet\cev Correlation Id: 9709e41b-9a18-e411-941e-00155d029b05 PWA Site URL: http://intranet.wavenet.lan/PWA SA Name: Project Server Application PSError: GeneralUnhandledException (42), LogLeve...

Hi Patmol,
Have you tried to go to the previous or next timesheet and then navigate with the "previous period" or "next period" to the timesheet in question.
Also have you tried to open it using a delegation session?
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

How to import the Issues list from an Excel File in Project Server 2013

Hi,
I'm using Project Server 2013.
A Project Manager has been playing with the Issues List, deleting some fields, creating new columns and modifying some columns name. The result of this is that I'm getting this error everytime the task
Reporting (Project Sync) is executed:
General
Reporting Wss list sync failed:
ReportingWssSyncListFailed (24018) - 1100. Details: id='24018' name='ReportingWssSyncListFailed' uid='4feafda7-f147-e411-940d-005056957f05' SPListType='a1efd9a9-bd03-4604-91f3-31a2cc5693ff' Error='1100'.
ReportingWssSyncListFailed (24018) - 1100. Details: id='24018' name='ReportingWssSyncListFailed' uid='5deafda7-f147-e411-940d-005056957f05' SPListType='a1efd9a9-bd03-4604-91f3-31a2cc5693ff' Error='1100'.
ReportingWssSyncListFailed (24018) - 1100. Details: id='24018' name='ReportingWssSyncListFailed' uid='69eafda7-f147-e411-940d-005056957f05' SPListType='a1efd9a9-bd03-4604-91f3-31a2cc5693ff' Error='1100'.
ReportingWssSyncListFailed (24018) - 1100. Details: id='24018' name='ReportingWssSyncListFailed' uid='75eafda7-f147-e411-940d-005056957f05' SPListType='a1efd9a9-bd03-4604-91f3-31a2cc5693ff' Error='1100'.
ReportingWssSyncListFailed (24018) - 1100. Details: id='24018' name='ReportingWssSyncListFailed' uid='81eafda7-f147-e411-940d-005056957f05' SPListType='a1efd9a9-bd03-4604-91f3-31a2cc5693ff' Error='1100'.
ReportingWssSyncListFailed (24018) - 1100. Details: id='24018' name='ReportingWssSyncListFailed' uid='8deafda7-f147-e411-940d-005056957f05' SPListType='a1efd9a9-bd03-4604-91f3-31a2cc5693ff' Error='1100'.
Reporting message processor failed:
ReportingWSSSyncMessageFailed (24016) - RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.. Details: id='24016' name='ReportingWSSSyncMessageFailed' uid='5beafda7-f147-e411-940d-005056957f05' QueueMessageBody='ProjectUID='a1efd9a9-bd03-4604-91f3-31a2cc5693ff'.
ForceFullSync='False'. SynchronizationType='Issues'' Error='RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.'.
ReportingWSSSyncMessageFailed (24016) - RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.. Details: id='24016' name='ReportingWSSSyncMessageFailed' uid='67eafda7-f147-e411-940d-005056957f05' QueueMessageBody='ProjectUID='a1efd9a9-bd03-4604-91f3-31a2cc5693ff'.
ForceFullSync='False'. SynchronizationType='Issues'' Error='RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.'.
ReportingWSSSyncMessageFailed (24016) - RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.. Details: id='24016' name='ReportingWSSSyncMessageFailed' uid='73eafda7-f147-e411-940d-005056957f05' QueueMessageBody='ProjectUID='a1efd9a9-bd03-4604-91f3-31a2cc5693ff'.
ForceFullSync='False'. SynchronizationType='Issues'' Error='RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.'.
ReportingWSSSyncMessageFailed (24016) - RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.. Details: id='24016' name='ReportingWSSSyncMessageFailed' uid='7feafda7-f147-e411-940d-005056957f05' QueueMessageBody='ProjectUID='a1efd9a9-bd03-4604-91f3-31a2cc5693ff'.
ForceFullSync='False'. SynchronizationType='Issues'' Error='RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.'.
ReportingWSSSyncMessageFailed (24016) - RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.. Details: id='24016' name='ReportingWSSSyncMessageFailed' uid='8beafda7-f147-e411-940d-005056957f05' QueueMessageBody='ProjectUID='a1efd9a9-bd03-4604-91f3-31a2cc5693ff'.
ForceFullSync='False'. SynchronizationType='Issues'' Error='RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.'.
ReportingWSSSyncMessageFailed (24016) - RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.. Details: id='24016' name='ReportingWSSSyncMessageFailed' uid='97eafda7-f147-e411-940d-005056957f05' QueueMessageBody='ProjectUID='a1efd9a9-bd03-4604-91f3-31a2cc5693ff'.
ForceFullSync='False'. SynchronizationType='Issues'' Error='RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.'.
Queue:
GeneralQueueJobFailed (26000) - ReportingWSSSync.WSSSyncMessageEx. Details: id='26000' name='GeneralQueueJobFailed' uid='98eafda7-f147-e411-940d-005056957f05' JobUID='9e937da7-f147-e411-940e-005056957f0d' ComputerName='b579360a-53ab-4fe0-bf9b-c62f5e8d3529'
GroupType='ReportingWSSSync' MessageType='WSSSyncMessageEx' MessageId='1' Stage='' CorrelationUID='0945bd9c-0d6a-a0f1-47b0-68cdfcfbff9a'. For more details, check the ULS logs on machine
b579360a-53ab-4fe0-bf9b-c62f5e8d3529 for entries with JobUID
9e937da7-f147-e411-940e-005056957f0d
What I'm trying to do is to create a new Project from the scratch, update the Issues List, not deleting or modifying columns, just creating new columns in order to match the names he (the Project Manager) put in his Issues List, then Export the list to Excel,
and then create a datasheet view matching the Exported list, but here I don't know how to import the list (copy / paste or whatsoever it can be done...)
Do you know how to do it, or do you know another/any method to solve this problem?
Thank you in advance,
José Espases

Hi José,
2 considerations:
The first one is that (as you experienced) one should not delete or rename any of the predefined columns in the risk/issue list. What you did is the right way, meaning keeping the native column as is and creating new ones based on the business needs. Finally
you just need to create view with the appropriate fields.
Then for importing risks from an Excel list, I can't test it right now, but you should have a datagrid view (MS Access type) allowing you pasting data from Excel.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Project Server 2013 AD Enterprise Resource Pool Synchronization Exception

Hello,
I am looking for assistance from the project server community.
When I click “Save and Synchronize” on the Active Directory Enterprise Resource Pool Synchronization page nothing happens and the status does not change.
This is a new instance of PWA and I am preforming this task using the farm admin account. The farm admin account can read AD.
Error 1:
w3wp.exe (0x1B98)
0x0B8C       Project Server
General      aeby7
Exception [bucketHash:F08803DE] Exception occured in method 'Admin.ResolveActiveDirectoryGroups' System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
at Microsoft.Office.Project.Server.ClaimsHelper.GetFormsAuthenticationProviderName(Uri context, SPUrlZone zone)
at Microsoft.Office.Project.Server.BusinessLayer.ActiveDirectoryUtility.TryGetGroupInfo(String searchRoot)
at System.Linq.Enumerable.WhereSelectArrayIterator`2.MoveNext()
at System.Linq.Buffer`1..ctor(IEnumerable`1 source)
at System.Linq.Enumerable.ToArray[TSource](IEnumerable`1 source)
at Microsoft.Office.Project.Server.Wcf.Implementation.PWAImpl.<>c__DisplayClassf2.<AdminResolveActiveDirectoryGroups>b__f1()
at Microsoft.Office.Project.Server.Wcf.Implementation.WcfMethodInvocation.InvokeBusinessObjectMethod(String businessObjectName, String methodName, IEnumerable`1 actions) StackTrace:
at Microsoft.Office.Project.Server.Native.dll: (sig=[sig]|2|microsoft.office.project.server.native.pdb, offset=3C1E) at Microsoft.Office.Project.Server.Native.dll: (offset=1254D)
d360539c-6d89-70e7-c077-92da686b0689
Error 2:
Error is: GeneralUnhandledException. Details: General Unhandled Exception in _Admin.ResolveActiveDirectoryGroups_ Attributes:
System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
at Microsoft.Office.Project.Server.ClaimsHelper.GetFormsAuthenticationProviderName(Uri context, SPUrlZone zone)
at Microsoft.Office.Project.Server.BusinessLayer.ActiveDirectoryUtility.TryGetGroupInfo(String searchRoot)
at System.Linq.Enumerable.WhereSelectArrayIterator`2.MoveNext()
at System.Linq.Buffer`1..ctor(IEnumerable`1 source)
at System.Linq.Enumerable.ToArray[TSource](IEnumerable`1 source)
at Microsoft.Office.Project.Server.Wcf.Implementation.PWAImpl.<>c__DisplayClassf2.<AdminResolveActiveDirectoryGroups>b__f1()
at Microsoft.Office.Project.Server.Wcf.Implementation.WcfMethodInvocation.InvokeBusinessObjectMethod(String businessObjectName, String methodName,
IEnumerable`1 actions) . Standard Information: PSI Entry Point:
Project User: i:0#.w|[DOMAIN\UserID] Correlation Id: f1f1a77f-6b45-e311-9407-00155d2abe21 PWA Site URL: [PWA URL] SA Name: Project Server Service Application PSError: GeneralUnhandledException (42), LogLevelManager Warning-ulsID:0x00101622 has no entities
explicitly specified.

Hi,
I also get the same error when I'm trying to do the synchronization between Enterprise Resource Pool and Active Directory.
I am in a single domain topology between Project Server 2013 and AD, and I'm doning the synchronization with the farm admin account, who has read/write access to AD.
Here are the last relevant messages I see:
w3wp.exe (0x2BE8) 0x1568 Project Server General aeby7 Exception
[bucketHash:F0FACBDF] Exception occured in method 'Admin.ResolveActiveDirectoryGroups' System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
at Microsoft.Office.Project.Server.ClaimsHelper.GetFormsAuthenticationProviderName(Uri context, SPUrlZone zone)
at Microsoft.Office.Project.Server.BusinessLayer.ActiveDirectoryUtility.TryGetGroupInfo(String domain, String searchPath, String searchFilter)
at Microsoft.Office.Project.Server.BusinessLayer.ActiveDirectoryUtility.TryGetGroupInfoByClaim(String encodedClaim)
at System.Linq.Enumerable.WhereSelectArrayIterator`2.MoveNext()
at System.Linq.Buffer`1..ctor(IEnumerable`1 source)
at System.Linq.Enumerable.ToArray[TSource](IEnumerable`1 source)
at Microsoft.Office.Project.Server.Wcf.Implementation.PWAImpl.<>c__DisplayClass10a.<AdminResolveActiveDirectoryGroups>b__109()
at Microsoft.Office.Project.Server.Wcf.Implementation.WcfMethodInvocation.InvokeBusinessObjectMethod(String businessObjectName, String methodName, IEnumerable`1 actions) StackTrace:
2b3d83ee10e5|2|, microsoft.office.project.server.native.pdb, offset=3C1E)
at Microsoft.Office.Project.Server.Native.dll: (offset=1255D)
w3wp.exe (0x2BE8) 0x1568 Project Server Unified Logging Service c91s Monitorable
Watson bucket parameters: Microsoft Project Server 2013, ULSException14, 070f6ea0 "project server", 0f001181 "15.0.4481.0", 6962a0f6 "microsoft.office.project.server.administration", 0f0011ad "15.0.4525.0", 51ade0c4 "tue jun 04 14:42:44 2013", 0000020f
"0000020f", 0000003b "0000003b", 0560164b "keynotfoundexception", 00101621 "aeby7"
w3wp.exe (0x2BE8) 0x1568 Project Server General aeby8 Medium
Error is: GeneralUnhandledException. Details: General Unhandled Exception in _Admin.ResolveActiveDirectoryGroups_ Attributes: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
at Microsoft.Office.Project.Server.ClaimsHelper.GetFormsAuthenticationProviderName(Uri context, SPUrlZone zone)
at Microsoft.Office.Project.Server.BusinessLayer.ActiveDirectoryUtility.TryGetGroupInfo(String domain, String searchPath, String searchFilter)
at Microsoft.Office.Project.Server.BusinessLayer.ActiveDirectoryUtility.TryGetGroupInfoByClaim(String encodedClaim)
at System.Linq.Enumerable.WhereSelectArrayIterator`2.MoveNext()     at System.Linq.Buffer`1..ctor(IEnumerable`1 source)
at System.Linq.Enumerable.ToArray[TSource](IEnumerable`1 source)
at Microsoft.Office.Project.Server.Wcf.Implementation.PWAImpl.<>c__DisplayClass10a.<AdminResolveActiveDirectoryGroups>b__109()
at Microsoft.Office.Project.Server.Wcf.Implementation.WcfMethodInvocation.InvokeBusinessObjectMethod(String businessObjectName, String methodName, IEnumerable`1 actions) . Standard Information: PSI Entry Point: Project User: LUXAIRLG\SQLADMIN2012
Correlation Id: 6cef3814-b3a2-e311-93f9-005056921080 PWA Site URL: xxx SA Name: PS2013 - Project Server Service Application PSError: GeneralUnhandledException (42). LogLevelManager Warning-ulsID:0x00101622 has no entities explicitly specified.
w3wp.exe (0x2BE8) 0x1568 Project Server Project Web App af04k Medium
Void SaveButtonClick(System.Object.System.Web.UI.WebControls.CommandEventArgs) : GeneralUnhandledException
Any ideas?
Thanks in advance

Problem after installation Project Server 2013 CU September 9, 2014

Dear All,
I have some problems after installation
Project Server 2013 CU September 9, 2014 (Hotfix 2883072) on 3 level farm
Before installing CU, I have installed
SP1 for Project Server 2013, installation and configuration was successful.
Then I have installed CU and I have not get any errors during installation process. Then I have restarted servers and in SharePoint health analyzer got an error about patch/installation status
on WFE server.
I checked in Windows installed updates and hotfix is installed. I checked in SharePoint Update and Upgrade history and there were no errors during installation. But when I checked in Manage
Patch Status list I found an information:
Language Pack for SharePoint and Project Server 2013 - Russian
Microsoft Project Server Russian Language Pack 15.0.4420.1017 Installed
Hotfix for Microsoft Project Server 2013 (KB2883072) 64-Bit Edition
15.0.4649.1001 Missing/Required
Microsoft Project Server 2013
Microsoft Project Server English Language Pack 15.0.4571.1502 Installed
Hotfix for Microsoft Project Server 2013 (KB2883072) 64-Bit Edition
15.0.4649.1001 Missing/Required
Service Pack 1 for Microsoft Project Server 2013 (KB2880553) 64-Bit Edition
15.0.4571.1502 Installed
Microsoft Project Server Web Front End Server
15.0.4571.1502 Installed
Hotfix for Microsoft Project Server 2013 (KB2883072) 64-Bit Edition
15.0.4649.1001 Missing/Required
Service Pack 1 for Microsoft Project Server 2013 (KB2880553) 64-Bit Edition
15.0.4571.1502 Installed
If I run installation again I get message that nothing will be updated - no update needed.
Please help, how I can install missed packages?

The problem was solved !
I solve it using two ways:
1. I have installed the hotfix for Project Server - Hotfix for Project Server 2013 October 14, 2014 KB 2889959 (Projectserverwfe-x-none.msp, Projectservermui-Language-Code.msp)
2. using command
Psconfig -cmd upgrade -inplace b2b -force -cmd applicationcontent -install -cmd installfeatures -cmd installcheck -noinstallcheck
After two actions I was able to run SharePoint Configuration Wizard and upgrade database. Configuration completed successful.

Project Server 2013 on premises Project Archiving not happening

Similar Messages

Maybe you are looking for