Project Server 2013 on Windows Server 2012 R2
Can we install Project Server 2013 on Windows Server 2012 R2? Is it supported? I searched a bit but couldn't find any concrete information if it is supported or not.
From the article:
http://blogs.technet.com/b/office_sustained_engineering/archive/2014/03/03/announcing-availability-of-slipstreamed-office-2013-and-sharepoint-server-2013-with-sp1.aspx
Today, aligned with the SharePoint Conference, we’re announcing availability
of a slipstreamed SharePoint Server 2013 with SP1. SharePoint administrators
will be able to use this updated installer to deploy on Windows Server 2012 R2.
which I got linked from the following
http://blogs.technet.com/b/projectsupport/archive/2014/02/25/project-2013-and-project-server-2013-service-pack-1.aspx
Similar Messages
-
Set up Search Service App For SharePoint server 2013 on Windows server 2012 R2 not working
Hi all,
I installed SharePoint server 2013 on Windows server 2012 R2 using VirtualBox. I created a DC(domain controller) server with a domain set up on one VM and it has SQL server 2012 SP1 installed. Then SharePoint 2013 on another VM was set up to access
the DC server. Everything seems working except Search Service App which cannot be sucessfully set up. Creation process for Search service app says Successful and 4 search databases were created and look fine. But when I navigate to search service app
admin page, it gives error info:
System status: The search service is not able to connect to the machine that hosts the administration component. Verify that the administration component '386f2cd6-47ca-4b3a-aeb5-d9116772ef16' in search application 'Search Service Application 1' is in
a good state and try again.
Search Application Topology: Unable to retrieve topology component health states. This may be because the admin component is not up and running.
From event viewer, I see following errors:
(1) Error From source: SharePoint Server
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance
(b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The object you are trying to create already exists. Try again using a different name.
Technical Support Details:
System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.
at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean
isAdministrationServiceJob)
(2) Error From source: SharePoint Server Search
Could not access the Search database. A generic error occurred while trying to access the database to obtain the schema version info.
Context: Application '386f2cd6-47ca-4b3a-aeb5-d9116772ef16'
(3) Warning from source: SharePoint Server Search
A database error occurred. Source: .Net SqlClient Data Provider Code: 8169 occurred 0 time(s) Description: Error ordinal: 1 Message:
Conversion failed when converting from a character string to uniqueidentifier., Class: 16, Number: 8169, State: 2 at
System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
(4) Error From source: SharePoint Server
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance
(b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have been upgraded.
Technical Support Details:
System.Runtime.InteropServices.COMException (0xC0041235): The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have
been upgraded.
Since separate DC server and SharePoint server do not work, I installed SharePoint 2013 on DC server ( so DC server has everything on it now ) but it gives exactly same result. Later I installed SharePoint 2013 SP1 and still have the same problem with Search
Service app. I spent two weeks tried all suggestions available from Web and Google but SharePoint Search Service simply does not work. Config and other databases work but why Search Service has this issue seemingly related to search DB.
Could anybody please help out? You deserve a top SharePoint consultant award if you could find a solution. I am so frustrated and so tired by this issue. This seems also to be a SP set up issue.
Thanks a lot.Using new Search Service App wizard to create SSA is always a success. I could delete existing SSA and recreate it and no problem. It says successful but when I open Search Admin page from CA, it gives me errors as mentioned.
Now I used the following PS script for creating SSA from Max Mercher, but it stays at the last setps in following script:
Add-PsSnapin Microsoft.SharePoint.PowerShell -ErrorAction SilentlyContinue
$IndexLocation = "C:\Search" #Location must be empty, will be deleted during the process!
$SearchAppPoolName = "SSAPool"
$SearchAppPoolAccountName = "mydomain\admin"
$SearchServiceName = "SSA"
$SearchServiceProxyName = "SSA Proxy"
$DatabaseServer = "W12R2DC1"
$DatabaseName = "SSA"
$spAppPool = Get-SPServiceApplicationPool -Identity $SearchAppPoolName -ErrorAction SilentlyContinue
if (!$spAppPool)
$spAppPool = New-SPServiceApplicationPool -Name $SearchAppPoolName -Account $SearchAppPoolAccountName -Verbose
$ServiceApplication = Get-SPEnterpriseSearchServiceApplication -Identity $SearchServiceName -ErrorAction SilentlyContinue
if (!$ServiceApplication)
# process stays at the following step forever, already one hour now.
$ServiceApplication = New-SPEnterpriseSearchServiceApplication -Name $SearchServiceName -ApplicationPool $spAppPool.Name -DatabaseServer $DatabaseServer -DatabaseName $DatabaseName
Account mydomain\admin is an farm managed account, domain admin account, in WG_ADMIN role, It is in all SQL server roles and is DBO. I see search DBs are already on SQL server. From Event viewer, I got following errors in sequence:
(1) Crawler:Content Plugin under source Crawler:Content Plugin
Content Plugin can not be initialized - list of CSS addresses is not set.
(2) Warning for SharePoint Server Search
A database error occurred. Source: .Net SqlClient Data Provider Code: 8169 occurred 0 time(s) Description: Error ordinal: 1 Message: Conversion failed when converting from a character string to uniqueidentifier., Class: 16, Number: 8169, State: 2
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
(3) Error for SharePoint Server Search
Could not access the Search database. A generic error occurred while trying to access the database to obtain the schema version info.
Context: Application 'cbc5a055-996b-44a7-9cbc-404322f9cfdf'
(4) Error for SharePoint Server
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have been upgraded.
(5) Error Shared Services for SharePoint Server Search
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The object you are trying to create already exists. Try again using a different name.
Technical Support Details:
System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.
at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob
Above errors keep being generated. Last step for SSA creation stay there forever. Any clue what is really going on? Thanks. -
Not able to install Exchange Server 2013 on Windows Server 2012
I got an error while installing exchange server 2013 on windows server 2012 : "The registry key "SOFTWARE\Microsoft\Exchange Server\v15\Pickup" does not exist under "HKEY_LOCAL_MACHINE " any related solutions highly appreciated
thanks :Hello,
Come back and mark the replies as answers if they help and unmark them if they provide no help.
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Cara Chen
TechNet Community Support -
Exchange Server 2013 In Windows Server 2012 - unable to logon EXchange Administrator Center (EAC)
Hi All,
I Just installed Exchange Server 2013 in Windows Server 2012 and trying to connect Dynamics CRM 2013 (DNS).
The Installations Success full but unable to load the EAC page by using the following URL
https://servername:port/owa/auth/logon.aspx
I have cross checked in Exchange/owa/auth folder don't have the "logon.aspx" file
But the auth folder have the "logoff.aspx"
I installed many time freshly in separate WS-2012 but it not contains that logon.aspx
I want access the Exchange Administrator Center
Please Help me to solve it
IIS Exchange (Missing of logon.aspx)
SRKD0808Hi All,
I sorted out this problem
Actually we have to run these 2 commands in Domain Control, But what i did I just run this
1) setup /PrepareSchema /IAcceptExchangeServerLicenseTerms
Command in Domain Control we don't need to run the 2nd command, Because I already try to installed exchange 2013 very first time it success and after some modifications
it gone.
That time it will ask you to provide Organization name, Once you give that it will create the Organization name in Domain control and it will save the settings when
you install first time
Because of this reason It is failing to run these 2 command
Finally what i did I just revert back my Domain control snapshot & Exchange server as well
Then i started freshly Installation in DC and Exchange server 2013 successfully installed
URL http://servername/ecp/default.aspx
Whole Process will be here
Exchange Server 2013 Step by Step Installation In Windows Server 2012
SRKD0808 -
Oracle client 32/64 bit on Crystal Server 2013 and Windows Server 2012
I'm getting the error "Unknown Database Connector Error" when I run report on the server and it works OK on crystal designer 2013.
Been reading this thread 32&64 bit Oracle Client but not much help there.
Here are the details
System
Windows Server 2012
Crystal Server 2013 SP5
Crystal Server has been installed and appears to work fine. I was able to develop a brand new report locally and saved it to the server and it displays ok. Of course when I click on refresh on the report, it will error out due to database connection it looks like.
We have installed both oracle client drivers 64 and 32. 64 was installed first and then 32.The path has been modified so that the 32 shows up first.
I even ensure oracle_home and oracle_home32 are specified and restarted the server. I still get the same error.
The tns entries are also located in both installs of oracle client...
What might be the issue?Oracle Database Client 12.1.0.2.0 (32-bit and 64-bit installed)
Installation Type: Custom
COMPONENTS INSTALLED:
SQLPLUS
ORACLE NET
We are currently not using an ODBC connection.
We installed Crystal 2013 Server SP05. This is the sole package installed (believe it's the latest version) without any extra patch package installed (believe no patch needed as it's the latest version). -
How to install SharePoint server 2013 in windows server 2012 R2
Hi,
I have SharePoint server 2013, and I want to install it on windows server 2012 R2 version.
Can you guide me on how to install it?,
or you if you got the download link of the full product of the latest release of SharePoint 2013 with sp1, please give me.
thanks in advance.Hi,
Now I could install SP 2013 following this article
http://iouchkov.wordpress.com/2013/10/19/how-to-install-sharepoint-2013-on-windows-server-2012-r2/
I realized installing prerequisites software manually wont let Sharepoint 2013 to be installed in Windows 2012 r2 because of some issues, but with the use of power shell I could.
Thanks everyone. -
Error when try to install exchange Server 2013 in windows server 2008 R2 Sp1
Hi
I'm getting these errors while trying to install Microsoft Exchange Server 2013 on my Windows Server 2008 R2 SP1 the user i'm using is the Administrator and it is already a member of "Enterprise
Admins" and "Schema Admins"
in my organization there is 6 Exchange server 2013 in 3 site windows server 2012 in this case
I have to install exchange 2013 in windows Server 2008 r2 sp1
the functional level 2008 R2 I getting these errors please help.
Errors:
This computer doesn't belong to a valid Active Directory site. Check the site and subnet definitions.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.InvalidADSite.aspx
Error:
A reboot from a previous installation is pending. Please restart the system and then rerun Setup.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.RebootPending.aspx
Error:
There is a pending reboot from a previous installation of a Windows Server role or feature. Please restart the computer and then run Setup again.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.PendingRebootWindowsComponents.aspx
Error:
You must be a member of the 'Organization Management' role group or a member of the 'Enterprise Admins' group to continue.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.GlobalServerInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedBridgeheadFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedCafeFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedFrontendTransportFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedMailboxFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedClientAccessFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedUnifiedMessagingFirstInstall.aspx
Error:
Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. See the Exchange setup log for more
information on this error.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.AdInitErrorRule.aspx
Error:
Either Active Directory doesn't exist, or it can't be contacted.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.CannotAccessAD.aspxI think it's from subnet in site and services
have 3 site A,B,C and new site is "D"I have problem in "D" site
A subnet is 10.33.50.0/24 AD 2012 ,exchange 2013
B subnet is 10.35.50.0/24 AD 2012 ,exchange 2013
C subnet is 10.36.50.0/24 AD 2012 ,exchange 2013
D subnet is 10.100.100.0/25 AD 2008 ,exchange 2013 error when install it
find event error
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair
the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
test-SetupPrerequisites
{Roles={LanguagePacks, Bridgehead, ClientAccess, UnifiedMessaging, Mailbox, FrontendTransport, Cafe}, LanguagesAvailableToInstall=True, DomainController=, CustomerFeedbackEnabled=True, ExchangeVersion=15.0.847.32, LanguagePackDir=D:\Exchange
Server Software, SufficientLanguagePackDiskSpace=True, ADInitError=Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites
or by rep, ScanType=PrecheckInstall, LanguagePackVersioning=True, HostingDeploymentEnabled=False, TargetDir=C:\Program Files\Microsoft\Exchange Server\V15, SetupRoles={LanguagePacks, AdminTools, Bridgehead, ClientAccess, UnifiedMessaging, Mailbox, FrontendTransport,
Cafe}} -
Fresh install of Exchange Server 2013 on Windows Server 2012 R2 Blank screen after install
Attempting to log in to the OWA I get a white screen immediately after entering credentials
When I open the Exchange Management Shell I get the error
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : AccessDenied,PSSessionOpenFailed
Along with the above error it also says Access is denied
Im running the Exchange shell as admin
There were no errors during the install and I did everything according to the Exchange Server Deployment Assistant
At first when I attempted to log in it would say my credentials were incorrect
This is part of a active directory set up and I fulfilled all of the active directory piece.Hi,
According your post, I understand that open EMS with error “AccessDenied,PSSessionOpenFailed” after fresh install Exchange 2013.
If I misunderstand your concern, please do not hesitate to let me know.
Please follow below steps for troubleshooting:
1. Reboot the server, usually fixes this error.
2. Make sure your authentication settings on your virtual directory for PowerShell is correct.
Internet Information Services (IIS) Manager, <Servername>, Sites, Default Web Site, PowerShell and in the right panel, scroll down to the Authentication module, then make sure that Anonymous access is disabled and Windows Authentication is
enabled.
3. Double check the configuration of HTTP binding on Default Web Site in Internet Information Services (IIS).
4. Run Get-User Identity | FL *power* to check whether the current logged in user has remote powershell enabled.
If the issue persists, please try to remove the PowerShell virtual directory and renew for testing.
Additional, I find an similar thread about your question, for your reference:
https://social.technet.microsoft.com/Forums/windows/en-US/29b3284a-36e1-43b0-87b8-63ee4500f265/exchange-2013-ems-throwing-access-denied-error-and-toolbox-giving-mmc-error?forum=exchangesvradmin
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support -
Install sharepoint 2013 on Windows server 2012, Microsoft Identity Extensions issue !!!!!!!!!
Sharepoint 2013 comes with prerequisitesinstaller.exe to install the software required for the actual Sharepoint installation.
I 've installed Windows server 2012 in the R2 edition as well as Standard edition, but installing the prerequisites ends with an issue for the Microsoft Identity Extensions (MIE) on both versions (screenshot).
The 2012 R2 server has been updated with all latest files by executing Windows update.
In case of the Server 2012 R2, MIE is already installed , but somehow the Sharepoint installation is missing something.
I al;so tried removing default install to let prerequisiteinstaller.exe to install it's own version, but that did not help.
When I skip the prerequisites remaining items, the Sharepoint installation stops directly , requesting the missing items.
I've tried several Sharepoint server installation files, including the 180 days free version.
Screenshots will be uploaded after my account has been checked......Hi Jay,
Installing SharePoint Server 2013 on a computer that is running Windows Server 2012 R2 could lead to unexpected behavior, therefore, Microsoft does not support SharePoint Server 2013 in Windows Server 2012 R2.
SharePoint Server 2013 with Service Pack 1 and SharePoint Foundation 2013 with Service Pack 1 will offer support for Windows Server 2012 R2.
Refer to:
SharePoint 2013 Support for Windows Server 2012 R2
In addition, as Dave suggested, for the sharepoint server issue, please post in the dedicated forum for a better response.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Is it ok to install Exchange 2013 on Windows Server 2012 Standard?
Hello everyone,
I'd like to know if it is ok/safe to install Exchange Server 2013 on Windows Server 2012 Standard?
As I started doing some research and noticed a page where Microsoft states they don't recommend running Exchange on Server 2012 Standard, and recommend making 2 different servers one for Active Directory and another for Exchange.
On that page they also listed some features that wouldn't work in case of Exchange is running on Server 2012. And that it may put a larger data load if setup this way.
I am hoping someone knowledgeable can explain and tell me if it is safe to use such setup or if it is better to use something like SBS 2011 Standard instead, which has Exchange included?
Has anyone installed Exchange 2013 on Server 2012 Standard successfully and used it for more then several months without problems?
Also just to give an idea on my background, I've been in IT field fairly long but haven't really updated to newer versions much and mainly used SBS 2003 and 2008 only with a few clients so haven't used 2008 too much.
Thanks in advance.Few things to note.
There is
NO SBS in 2012
All you need is a Std edition of Windows for Exchange 2013, as there is no difference in features between Std and Datacenter as far as Exchange is concerned.
For 10 users, you can have one box with both AD and Exchange. It is not MS recommeded, but it IS supported.
Rajith Enchiparambil |
http://www.howexchangeworks.com | -
Not able to inistall Sharepoint 2013 on windows server 2012 r2
Hi ,
I am trying to install Sharepoint enterprise 2013 on windows 2012 r2. In very early stage i got issue when i ran prerequisite installer.
As we all know in this case we need to install prerequisite manually. I downloaded all the prerequisite and installed them manually. I have enabled all web and application role. then followed below link and installed all the prerequisite
http://iouchkov.wordpress.com/2013/10/19/how-to-install-sharepoint-2013-on-windows-server-2012-r2/
SQL Server 2008 R2 SP1 Native
Client
Microsoft
WCF Data Services 5.0
Microsoft Information Protection
and Control Client (MSIPC)
Microsoft Sync Framework Runtime
v1.0 SP1 (x64)
Windows
Identity Extensions
Windows
Identity Foundation (KB974405)
Windows
Server AppFabric
CU
1 for AppFabric 1.1 (KB2671763)
All got installed correctly on server validated from control panel then i restarted the server and Ran SharePoint Set up
But still facing issue attached in form of image
Please help me on this.
kirteshHi kirtesh,
According to your description, my understanding is that you got an error when you ran prerequisite installer.
Please make sure the Windows Server Features and Role services are enabled in your SharePoint server.
Start > All Programs > Administrative Tools > Server Manager->Add Roles and Features:
i. Application Server
ii. File Services
iii. Web Server (IIS)
Best Regards,
Wendy
Wendy Li
TechNet Community Support -
Installing Exchange 2013 on Windows Server 2012 R2
Now that SP1 has been released, it is supported to run Exchange 2013 on Windows Server 2012 R2
But since it is not yet possible to download Exchange 2013 with integrated SP1 (slipstreamed), is the following installation procedure supported:
- Install Exchange 2013 (without SP1) on Windows Server 2012 R2
- Install SP1 on top of Exchange 2013
If this is not supported, can someone tell me when the Exchange 2013 with integrated SP1 (slipstreamed) download will be released?yes the SP1 is the full product. if you need step by step instruction to migrate to this new version you can get info here : http://buenoflex.com/install-exchange-2013-sp1/
Arnaud Buonaccorsi - GSX Groupware Solutions
http://www.buenoflex.com
http://www.gsx.com <= The monitoring solution for Exchange and Sharepoint -
Unable to install Sharepoint Foundation 2013 in Windows Server 2012 for FIM 2010 R2
HI,
I am Unable to install Sharepoint Foundation 2013 in Windows Server 2012 for FIM 2010 R2,
Before SharePoint Foundation 2013 installation I installed all prerequisite software that is required for SharePoint Foundation 2013 but when we run SharePoint Foundation 2013 setup that gives below error so I am requesting you please help on this.
Setup is unable to proceed due to the following error(s):
Windows Server Appfabric is not correctly configured.You should unistall Windows Server Appfabric and reinstall it using the SharePoint Products Preparation Tool.
Regards
Anil KumarYou really need to do what error is suggesting.
Windows Server Appfabric is not correctly configured.You should unistall Windows Server Appfabric and reinstall it using the SharePoint Products Preparation Tool.
Nosh Mernacaj, Identity Management Specialist -
Problem installing sharepoint foundation 2013 on windows server 2008 r2
anybody has experience installing sharepoint 2013 on windows server 2008 r2? I failed to install it even if I have all the latest patches installed and the sql server 2012 express installed. it keeps failing to install the prerequisites.
• Microsoft .NET Framework 4.5: equivalent products already installed (no action taken)
• Windows Management Framework 3.0: was already installed (no action taken)
• Application Server Role, Web Server (IIS) Role: configuration error
• Microsoft SQL Server 2008 R2 SP1 Native Client: Installation skipped
• Windows Identity Foundation (KB974405): Installation skipped
• Microsoft Sync Framework Runtime v1.0 SP1 (x64): Installation skipped
• Windows Server AppFabric: Installation skipped
• Microsoft Identity Extensions: Installation skipped
• Microsoft Information Protection and Control Client: Installation skipped
• Microsoft WCF Data Services 5.0: Installation skipped
• Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763): Installation skipped
log file:
2014-04-30 17:32:32 - Processor architecture is (9)
2014-04-30 17:32:32 - Reading the following string value/name...
2014-04-30 17:32:32 - Common Startup
2014-04-30 17:32:32 - from the following registry location...
2014-04-30 17:32:32 - SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
2014-04-30 17:32:32 - The value is...
2014-04-30 17:32:32 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
2014-04-30 17:32:32 - Trying to remove the startup task if there is any.
2014-04-30 17:32:32 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\SharePointServerPreparationToolStartup_0FF1CE14-0000-0000-0000-000000000000.cmd
2014-04-30 17:32:32 - Error: Startup task doesn't exist. This is not a continuation after a restart.
2014-04-30 17:32:32 - Locating the following command line arguments file:
2014-04-30 17:32:32 - C:\Program Files (x86)\MSECache\SharePoint2010\PrerequisiteInstaller.Arguments.txt
2014-04-30 17:32:32 - Error: This file does not exist
2014-04-30 17:32:32 - Details of the current operating system:
2014-04-30 17:32:32 - Major version number of the operating system: (6)
2014-04-30 17:32:32 - Minor version number of the operating system: (1)
2014-04-30 17:32:32 - Build number of the operating system: (0X1DB1=7601)
2014-04-30 17:32:32 - Major version number of the latest Service Pack: (1)
2014-04-30 17:32:32 - Minor version number of the latest Service Pack: (0)
2014-04-30 17:32:32 - Platform ID of the operating system: (2)
2014-04-30 17:32:32 - Product suites available on the operating system: (0X10=16)
2014-04-30 17:32:32 - Product type of the operating system: VER_NT_DOMAIN_CONROLLER
2014-04-30 17:32:32 - Product type: (0X21=33)
2014-04-30 17:32:32 - OS type: (0)
2014-04-30 17:32:32 - Configuring the application's property sheet...
2014-04-30 17:32:32 - Check whether the following prerequisite is installed:
2014-04-30 17:32:32 - Windows Management Framework 3.0
2014-04-30 17:32:32 - Reading the following string value/name...
2014-04-30 17:32:32 - PowerShellVersion
2014-04-30 17:32:32 - from the following registry location...
2014-04-30 17:32:32 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-04-30 17:32:32 - The value is...
2014-04-30 17:32:32 - 3.0
2014-04-30 17:32:32 - Reading the following string value/name...
2014-04-30 17:32:32 - CTPVersion
2014-04-30 17:32:32 - from the following registry location...
2014-04-30 17:32:32 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-04-30 17:32:32 - Could not find or unable to read CTPVersion key
2014-04-30 17:32:32 - The prerequisite above is already installed
2014-04-30 17:32:32 - Check whether the following prerequisite is installed:
2014-04-30 17:32:32 - Microsoft .NET Framework 4.5
2014-04-30 17:32:32 - Reading the following DWORD value/name...
2014-04-30 17:32:32 - Install
2014-04-30 17:32:32 - from the following registry location...
2014-04-30 17:32:32 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-04-30 17:32:32 - The value is (1)
2014-04-30 17:32:32 - Reading the following string value/name...
2014-04-30 17:32:32 - Version
2014-04-30 17:32:32 - from the following registry location...
2014-04-30 17:32:32 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-04-30 17:32:32 - The value is...
2014-04-30 17:32:32 - 4.5.50938
2014-04-30 17:32:32 - A post release .NET 4.5 is installed
2014-04-30 17:32:32 - Check whether the following prerequisite is installed:
2014-04-30 17:32:32 - Windows Identity Foundation (KB974405)
2014-04-30 17:32:32 - Reading the following string value/name...
2014-04-30 17:32:32 -
2014-04-30 17:32:32 - from the following registry location...
2014-04-30 17:32:32 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2014-04-30 17:32:32 - Check whether the following prerequisite is installed:
2014-04-30 17:32:32 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2014-04-30 17:32:32 - Reading version of the following file...
2014-04-30 17:32:32 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2014-04-30 17:32:32 - GetFileVersionInfoSize failed (-2147024894)
2014-04-30 17:32:32 - Check whether the following prerequisite is installed:
2014-04-30 17:32:32 - Microsoft SQL Server 2008 R2 SP1 Native Client
2014-04-30 17:32:32 - Reading the following string value/name...
2014-04-30 17:32:32 - Version
2014-04-30 17:32:32 - from the following registry location...
2014-04-30 17:32:32 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2014-04-30 17:32:32 - Check whether the following prerequisite is installed:
2014-04-30 17:32:32 - Windows Server AppFabric
2014-04-30 17:32:32 - Reading the following string value/name...
2014-04-30 17:32:32 - ProductVersion
2014-04-30 17:32:32 - from the following registry location...
2014-04-30 17:32:32 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-04-30 17:32:32 - Check whether the following prerequisite is installed:
2014-04-30 17:32:32 - Windows Identity Foundation (KB974405)
2014-04-30 17:32:32 - Reading the following string value/name...
2014-04-30 17:32:32 -
2014-04-30 17:32:32 - from the following registry location...
2014-04-30 17:32:32 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2014-04-30 17:32:32 - Check whether the following prerequisite is installed:
2014-04-30 17:32:32 - Microsoft Information Protection and Control Client
2014-04-30 17:32:32 - Reading the following string value/name...
2014-04-30 17:32:32 -
2014-04-30 17:32:32 - from the following registry location...
2014-04-30 17:32:32 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2014-04-30 17:32:32 - Check whether the following prerequisite is installed:
2014-04-30 17:32:32 - Microsoft WCF Data Services 5.0
2014-04-30 17:32:32 - Reading the following string value/name...
2014-04-30 17:32:32 - Version
2014-04-30 17:32:32 - from the following registry location...
2014-04-30 17:32:32 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2014-04-30 17:32:32 - Check whether the following prerequisite is installed:
2014-04-30 17:32:32 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2014-04-30 17:32:32 - Reading the following DWORD value/name...
2014-04-30 17:32:32 - IsInstalled
2014-04-30 17:32:32 - from the following registry location...
2014-04-30 17:32:32 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2014-04-30 17:32:38 - Beginning download/installation
2014-04-30 17:32:38 - Created thread for installer
2014-04-30 17:32:38 - "C:\Windows\system32\ServerManagerCmd.exe" -inputpath "C:\Users\ADMINI~1\AppData\Local\Temp\1\Pre2AD9.tmp.XML"
2014-04-30 17:32:38 - Install process returned (0X3EB=1003)
2014-04-30 17:32:38 - [In HRESULT format] (0X800703EB=-2147023893)
2014-04-30 17:32:38 - "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\aspnet_regiis.exe" -i
2014-04-30 17:32:39 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:40 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:41 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:42 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:43 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:44 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:45 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:46 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:47 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:48 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:49 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:50 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:51 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:52 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:53 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:53 - Install process returned (0)
2014-04-30 17:32:53 - [In HRESULT format] (0)
2014-04-30 17:32:53 - "C:\Windows\system32\cscript.exe" "C:\Windows\system32\iisext.vbs" /enext "ASP.NET v4.0.30319"
2014-04-30 17:32:54 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:55 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:56 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:57 - Install process returned (-2146646015)
2014-04-30 17:32:57 - [In HRESULT format] (-2146646015)
2014-04-30 17:32:57 - Error when enabling ASP.NET v4.0.30319
2014-04-30 17:32:57 - Last return code (-2146646015)
2014-04-30 17:32:57 - Reading the following DWORD value/name...
2014-04-30 17:32:57 - Flags
2014-04-30 17:32:57 - from the following registry location...
2014-04-30 17:32:57 - SOFTWARE\Microsoft\Updates\UpdateExeVolatile
2014-04-30 17:32:57 - Reading the following string value/name...
2014-04-30 17:32:57 - PendingFileRenameOperations
2014-04-30 17:32:57 - from the following registry location...
2014-04-30 17:32:57 - SYSTEM\CurrentControlSet\Control\Session Manager
2014-04-30 17:32:57 - Reading the following registry location...
2014-04-30 17:32:57 - SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\RebootRequired
2014-04-30 17:32:57 - Error: The tool was unable to install Application Server Role, Web Server (IIS) Role.
2014-04-30 17:32:57 - Last return code (-2146646015)
2014-04-30 17:32:57 - Options for further diagnostics: 1. Look up the return code value 2. Download the prerequisite manually and verify size downloaded by the prerequisite installer. 3. Install the prerequisite manually from the given location without any
command line options.
2014-04-30 17:32:57 - Cannot retry
2014-04-30 17:32:57 - Check whether the following prerequisite is installed:
2014-04-30 17:32:57 - Windows Management Framework 3.0
2014-04-30 17:32:57 - Reading the following string value/name...
2014-04-30 17:32:57 - PowerShellVersion
2014-04-30 17:32:57 - from the following registry location...
2014-04-30 17:32:57 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-04-30 17:32:57 - The value is...
2014-04-30 17:32:57 - 3.0
2014-04-30 17:32:57 - Reading the following string value/name...
2014-04-30 17:32:57 - CTPVersion
2014-04-30 17:32:57 - from the following registry location...
2014-04-30 17:32:57 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-04-30 17:32:57 - Could not find or unable to read CTPVersion key
2014-04-30 17:32:57 - The prerequisite above is already installed
2014-04-30 17:32:57 - Check whether the following prerequisite is installed:
2014-04-30 17:32:57 - Microsoft .NET Framework 4.5
2014-04-30 17:32:57 - Reading the following DWORD value/name...
2014-04-30 17:32:57 - Install
2014-04-30 17:32:57 - from the following registry location...
2014-04-30 17:32:57 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-04-30 17:32:57 - The value is (1)
2014-04-30 17:32:57 - Reading the following string value/name...
2014-04-30 17:32:57 - Version
2014-04-30 17:32:57 - from the following registry location...
2014-04-30 17:32:57 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-04-30 17:32:57 - The value is...
2014-04-30 17:32:57 - 4.5.50938
2014-04-30 17:32:57 - A post release .NET 4.5 is installed
2014-04-30 17:32:57 - Check whether the following prerequisite is installed:
2014-04-30 17:32:57 - Windows Identity Foundation (KB974405)
2014-04-30 17:32:57 - Reading the following string value/name...
2014-04-30 17:32:57 -
2014-04-30 17:32:57 - from the following registry location...
2014-04-30 17:32:57 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2014-04-30 17:32:57 - Check whether the following prerequisite is installed:
2014-04-30 17:32:57 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2014-04-30 17:32:57 - Reading version of the following file...
2014-04-30 17:32:57 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2014-04-30 17:32:57 - GetFileVersionInfoSize failed (-2147024894)
2014-04-30 17:32:57 - Check whether the following prerequisite is installed:
2014-04-30 17:32:57 - Microsoft SQL Server 2008 R2 SP1 Native Client
2014-04-30 17:32:57 - Reading the following string value/name...
2014-04-30 17:32:57 - Version
2014-04-30 17:32:57 - from the following registry location...
2014-04-30 17:32:57 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2014-04-30 17:32:57 - Check whether the following prerequisite is installed:
2014-04-30 17:32:57 - Windows Server AppFabric
2014-04-30 17:32:57 - Reading the following string value/name...
2014-04-30 17:32:57 - ProductVersion
2014-04-30 17:32:57 - from the following registry location...
2014-04-30 17:32:57 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-04-30 17:32:57 - Check whether the following prerequisite is installed:
2014-04-30 17:32:57 - Windows Identity Foundation (KB974405)
2014-04-30 17:32:57 - Reading the following string value/name...
2014-04-30 17:32:57 -
2014-04-30 17:32:57 - from the following registry location...
2014-04-30 17:32:57 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2014-04-30 17:32:57 - Check whether the following prerequisite is installed:
2014-04-30 17:32:57 - Microsoft Information Protection and Control Client
2014-04-30 17:32:57 - Reading the following string value/name...
2014-04-30 17:32:57 -
2014-04-30 17:32:57 - from the following registry location...
2014-04-30 17:32:57 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2014-04-30 17:32:57 - Check whether the following prerequisite is installed:
2014-04-30 17:32:57 - Microsoft WCF Data Services 5.0
2014-04-30 17:32:57 - Reading the following string value/name...
2014-04-30 17:32:57 - Version
2014-04-30 17:32:57 - from the following registry location...
2014-04-30 17:32:57 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2014-04-30 17:32:57 - Check whether the following prerequisite is installed:
2014-04-30 17:32:57 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2014-04-30 17:32:57 - Reading the following DWORD value/name...
2014-04-30 17:32:57 - IsInstalled
2014-04-30 17:32:57 - from the following registry location...
2014-04-30 17:32:57 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2014-04-30 17:33:21 - Opening log file
2014-04-30 17:33:21 - Opened action for user
2014-04-30 17:33:21 - C:\Users\ADMINI~1\AppData\Local\Temp\1\prerequisiteinstaller.2014.04.30-17.32.32.log2014-06-20 08:18:39 - Processor architecture is (9)
2014-06-20 08:18:39 - Reading the following string value/name...
2014-06-20 08:18:39 - Common Startup
2014-06-20 08:18:39 - from the following registry location...
2014-06-20 08:18:39 - SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
2014-06-20 08:18:39 - The value is...
2014-06-20 08:18:39 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
2014-06-20 08:18:39 - Trying to remove the startup task if there is any.
2014-06-20 08:18:39 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\SharePointServerPreparationToolStartup_0FF1CE14-0000-0000-0000-000000000000.cmd
2014-06-20 08:18:39 - Error: Startup task doesn't exist. This is not a continuation after a restart.
2014-06-20 08:18:39 - Locating the following command line arguments file:
2014-06-20 08:18:39 - C:\Program Files (x86)\MSECache\SharePoint2010\PrerequisiteInstaller.Arguments.txt
2014-06-20 08:18:39 - Error: This file does not exist
2014-06-20 08:18:39 - Details of the current operating system:
2014-06-20 08:18:39 - Major version number of the operating system: (6)
2014-06-20 08:18:39 - Minor version number of the operating system: (1)
2014-06-20 08:18:39 - Build number of the operating system: (0X1DB1=7601)
2014-06-20 08:18:39 - Major version number of the latest Service Pack: (1)
2014-06-20 08:18:39 - Minor version number of the latest Service Pack: (0)
2014-06-20 08:18:39 - Platform ID of the operating system: (2)
2014-06-20 08:18:39 - Product suites available on the operating system: (0X10=16)
2014-06-20 08:18:39 - Product type of the operating system: VER_NT_DOMAIN_CONROLLER
2014-06-20 08:18:39 - Product type: (0X21=33)
2014-06-20 08:18:39 - OS type: (0)
2014-06-20 08:18:39 - Configuring the application's property sheet...
2014-06-20 08:18:39 - Check whether the following prerequisite is installed:
2014-06-20 08:18:39 - Windows Management Framework 3.0
2014-06-20 08:18:39 - Reading the following string value/name...
2014-06-20 08:18:39 - PowerShellVersion
2014-06-20 08:18:39 - from the following registry location...
2014-06-20 08:18:39 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-06-20 08:18:39 - The value is...
2014-06-20 08:18:39 - 4.0
2014-06-20 08:18:39 - A higher version of the prerequisite above is already installed
2014-06-20 08:18:39 - Check whether the following prerequisite is installed:
2014-06-20 08:18:39 - Microsoft .NET Framework 4.5
2014-06-20 08:18:39 - Reading the following DWORD value/name...
2014-06-20 08:18:39 - Install
2014-06-20 08:18:39 - from the following registry location...
2014-06-20 08:18:39 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-06-20 08:18:39 - The value is (1)
2014-06-20 08:18:39 - Reading the following string value/name...
2014-06-20 08:18:39 - Version
2014-06-20 08:18:39 - from the following registry location...
2014-06-20 08:18:39 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-06-20 08:18:39 - The value is...
2014-06-20 08:18:39 - 4.5.50938
2014-06-20 08:18:39 - A post release .NET 4.5 is installed
2014-06-20 08:18:39 - Check whether the following prerequisite is installed:
2014-06-20 08:18:39 - Windows Identity Foundation (KB974405)
2014-06-20 08:18:39 - Reading the following string value/name...
2014-06-20 08:18:39 -
2014-06-20 08:18:39 - from the following registry location...
2014-06-20 08:18:39 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2014-06-20 08:18:39 - The value is...
2014-06-20 08:18:39 - 6.1.7600.0
2014-06-20 08:18:39 - The prerequisite above is already installed
2014-06-20 08:18:39 - Check whether the following prerequisite is installed:
2014-06-20 08:18:39 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2014-06-20 08:18:39 - Reading version of the following file...
2014-06-20 08:18:39 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2014-06-20 08:18:39 - The version is...
2014-06-20 08:18:39 - 1.0.1215.0
2014-06-20 08:18:39 - Check whether the following prerequisite is installed:
2014-06-20 08:18:39 - Microsoft SQL Server 2008 R2 SP1 Native Client
2014-06-20 08:18:39 - Reading the following string value/name...
2014-06-20 08:18:39 - Version
2014-06-20 08:18:39 - from the following registry location...
2014-06-20 08:18:39 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2014-06-20 08:18:39 - The value is...
2014-06-20 08:18:39 - 10.0.1600.22
2014-06-20 08:18:39 - Check whether the following prerequisite is installed:
2014-06-20 08:18:39 - Windows Server AppFabric
2014-06-20 08:18:39 - Reading the following string value/name...
2014-06-20 08:18:40 - ProductVersion
2014-06-20 08:18:40 - from the following registry location...
2014-06-20 08:18:40 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-20 08:18:40 - Check whether the following prerequisite is installed:
2014-06-20 08:18:40 - Windows Identity Foundation (KB974405)
2014-06-20 08:18:40 - Reading the following string value/name...
2014-06-20 08:18:40 -
2014-06-20 08:18:40 - from the following registry location...
2014-06-20 08:18:40 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2014-06-20 08:18:40 - Check whether the following prerequisite is installed:
2014-06-20 08:18:40 - Microsoft Information Protection and Control Client
2014-06-20 08:18:40 - Reading the following string value/name...
2014-06-20 08:18:40 -
2014-06-20 08:18:40 - from the following registry location...
2014-06-20 08:18:40 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2014-06-20 08:18:40 - Check whether the following prerequisite is installed:
2014-06-20 08:18:40 - Microsoft WCF Data Services 5.0
2014-06-20 08:18:40 - Reading the following string value/name...
2014-06-20 08:18:40 - Version
2014-06-20 08:18:40 - from the following registry location...
2014-06-20 08:18:40 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2014-06-20 08:18:40 - Check whether the following prerequisite is installed:
2014-06-20 08:18:40 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2014-06-20 08:18:40 - Reading the following DWORD value/name...
2014-06-20 08:18:40 - IsInstalled
2014-06-20 08:18:40 - from the following registry location...
2014-06-20 08:18:40 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2014-06-20 08:18:44 - Beginning download/installation
2014-06-20 08:18:44 - Created thread for installer
2014-06-20 08:18:44 - "C:\Windows\system32\ServerManagerCmd.exe" -inputpath "C:\Users\ADMINI~1\AppData\Local\Temp\2\Pre6515.tmp.XML"
2014-06-20 08:18:45 - Install process returned (0X3EB=1003)
2014-06-20 08:18:45 - [In HRESULT format] (0X800703EB=-2147023893)
2014-06-20 08:18:45 - "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\aspnet_regiis.exe" -i
2014-06-20 08:18:45 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:18:46 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:18:47 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:18:48 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:18:49 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:18:50 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:18:51 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:18:52 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:18:53 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:18:54 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:18:55 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:18:56 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:18:57 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:18:58 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:18:59 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:19:00 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:19:01 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:19:02 - Install process returned (0)
2014-06-20 08:19:02 - [In HRESULT format] (0)
2014-06-20 08:19:02 - "C:\Windows\system32\cscript.exe" "C:\Windows\system32\iisext.vbs" /enext "ASP.NET v4.0.30319"
2014-06-20 08:19:02 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:19:03 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:19:04 - Install process returned (-2146646015)
2014-06-20 08:19:04 - [In HRESULT format] (-2146646015)
2014-06-20 08:19:04 - Error when enabling ASP.NET v4.0.30319
2014-06-20 08:19:04 - Last return code (-2146646015)
2014-06-20 08:19:04 - Reading the following DWORD value/name...
2014-06-20 08:19:04 - Flags
2014-06-20 08:19:04 - from the following registry location...
2014-06-20 08:19:04 - SOFTWARE\Microsoft\Updates\UpdateExeVolatile
2014-06-20 08:19:04 - Reading the following string value/name...
2014-06-20 08:19:04 - PendingFileRenameOperations
2014-06-20 08:19:04 - from the following registry location...
2014-06-20 08:19:04 - SYSTEM\CurrentControlSet\Control\Session Manager
2014-06-20 08:19:04 - Reading the following registry location...
2014-06-20 08:19:04 - SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\RebootRequired
2014-06-20 08:19:04 - Error: The tool was unable to install Application Server Role, Web Server (IIS) Role.
2014-06-20 08:19:04 - Last return code (-2146646015)
2014-06-20 08:19:04 - Options for further diagnostics: 1. Look up the return code value 2. Download the prerequisite manually and verify size downloaded by the prerequisite installer. 3. Install the prerequisite manually from the given location without any
command line options.
2014-06-20 08:19:04 - Cannot retry
2014-06-20 08:19:04 - Check whether the following prerequisite is installed:
2014-06-20 08:19:04 - Windows Management Framework 3.0
2014-06-20 08:19:04 - Reading the following string value/name...
2014-06-20 08:19:04 - PowerShellVersion
2014-06-20 08:19:04 - from the following registry location...
2014-06-20 08:19:04 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-06-20 08:19:04 - The value is...
2014-06-20 08:19:04 - 4.0
2014-06-20 08:19:04 - A higher version of the prerequisite above is already installed
2014-06-20 08:19:04 - Check whether the following prerequisite is installed:
2014-06-20 08:19:04 - Microsoft .NET Framework 4.5
2014-06-20 08:19:04 - Reading the following DWORD value/name...
2014-06-20 08:19:04 - Install
2014-06-20 08:19:04 - from the following registry location...
2014-06-20 08:19:04 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-06-20 08:19:04 - The value is (1)
2014-06-20 08:19:04 - Reading the following string value/name...
2014-06-20 08:19:04 - Version
2014-06-20 08:19:04 - from the following registry location...
2014-06-20 08:19:04 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-06-20 08:19:04 - The value is...
2014-06-20 08:19:04 - 4.5.50938
2014-06-20 08:19:04 - A post release .NET 4.5 is installed
2014-06-20 08:19:04 - Check whether the following prerequisite is installed:
2014-06-20 08:19:04 - Windows Identity Foundation (KB974405)
2014-06-20 08:19:04 - Reading the following string value/name...
2014-06-20 08:19:04 -
2014-06-20 08:19:04 - from the following registry location...
2014-06-20 08:19:04 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2014-06-20 08:19:04 - The value is...
2014-06-20 08:19:04 - 6.1.7600.0
2014-06-20 08:19:04 - The prerequisite above is already installed
2014-06-20 08:19:04 - Check whether the following prerequisite is installed:
2014-06-20 08:19:04 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2014-06-20 08:19:04 - Reading version of the following file...
2014-06-20 08:19:04 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2014-06-20 08:19:04 - The version is...
2014-06-20 08:19:04 - 1.0.1215.0
2014-06-20 08:19:04 - Check whether the following prerequisite is installed:
2014-06-20 08:19:04 - Microsoft SQL Server 2008 R2 SP1 Native Client
2014-06-20 08:19:04 - Reading the following string value/name...
2014-06-20 08:19:04 - Version
2014-06-20 08:19:04 - from the following registry location...
2014-06-20 08:19:04 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2014-06-20 08:19:04 - The value is...
2014-06-20 08:19:04 - 10.0.1600.22
2014-06-20 08:19:04 - Check whether the following prerequisite is installed:
2014-06-20 08:19:04 - Windows Server AppFabric
2014-06-20 08:19:04 - Reading the following string value/name...
2014-06-20 08:19:04 - ProductVersion
2014-06-20 08:19:04 - from the following registry location...
2014-06-20 08:19:04 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-20 08:19:04 - Check whether the following prerequisite is installed:
2014-06-20 08:19:04 - Windows Identity Foundation (KB974405)
2014-06-20 08:19:04 - Reading the following string value/name...
2014-06-20 08:19:04 -
2014-06-20 08:19:04 - from the following registry location...
2014-06-20 08:19:04 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2014-06-20 08:19:04 - Check whether the following prerequisite is installed:
2014-06-20 08:19:04 - Microsoft Information Protection and Control Client
2014-06-20 08:19:04 - Reading the following string value/name...
2014-06-20 08:19:04 -
2014-06-20 08:19:04 - from the following registry location...
2014-06-20 08:19:04 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2014-06-20 08:19:04 - Check whether the following prerequisite is installed:
2014-06-20 08:19:04 - Microsoft WCF Data Services 5.0
2014-06-20 08:19:04 - Reading the following string value/name...
2014-06-20 08:19:04 - Version
2014-06-20 08:19:04 - from the following registry location...
2014-06-20 08:19:04 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2014-06-20 08:19:04 - Check whether the following prerequisite is installed:
2014-06-20 08:19:04 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2014-06-20 08:19:04 - Reading the following DWORD value/name...
2014-06-20 08:19:04 - IsInstalled
2014-06-20 08:19:04 - from the following registry location...
2014-06-20 08:19:04 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2014-06-20 08:19:45 - Opening log file
2014-06-20 08:19:45 - Opened action for user
2014-06-20 08:19:45 - C:\Users\ADMINI~1\AppData\Local\Temp\2\prerequisiteinstaller.2014.06.20-08.18.39.log -
Hi Microsoft Team,
We need your urgent advice and that is also on priority:
Issue Description: We need to migrate from
WINDOW SERVER 2003 to WINDOW SERVER 2012 while the development activity will be carried
under WINDOW SERVER 2008 as DEVELOPMENT BOX.
.NET Framework Version: 3.5 ( For both DEVLOPMENT(WINDOW SERVER 2008) and WEBSERVER(to WINDOW SERVER 2012))
IIS Version: 7.5 (For both DEVLOPMENT(WINDOW SERVER 2008) and WEBSERVER(to WINDOW SERVER 2012))
Need your quick advice Is that configuration feasible for Development and
Deployment (Web Server).
Highly appreciate your response as this will depend which product we need to buy also if you feel any showstopper or concern. Please let us know.Hi,
As suggested by Tim, in order to get better assistance, we can ask for help in the following IIS forum.
IIS Forum
http://forums.iis.net/
In addition, regarding migrating from Windows Server 2003 to Windows Server 2012, the following blog can be referred to for more information.
Step-By-Step: Active Directory Migration from Windows Server 2003 to Windows Server 2012
http://blogs.technet.com/b/canitpro/archive/2013/05/27/step-by-step-active-directory-migration-from-windows-server-2003-to-windows-server-2012.aspx
Best regards,
Frank Shen
Maybe you are looking for
-
Error while modifying HR infotype PA0105 using HR_INFOTYPE_OPERATION
Hello All, I am not able to modifying the infotype PA0105. Currently I am using the FM HR_INFOTYPE_OPERATION. But I am not able to modify the record. Has anyone faced any such situation... Please help..!! Useful pointers will be appreciated... Thanks
-
Availability of copy function on e mail
How do I copy a tracking number that's not highlighted so I can track a package? There is no edit function showing.
-
Complaints Lack of Customer Service and No respons...
Hi there I have had very similar experiences. Misold BT Business Line with Braodband speeds. Engineer called and connected to an old second line at the property which would only give me 2 MB. Complained - Nothing Happened BT engineer said that my hom
-
Upgrade to FF 8 (from 3.6) appeared to go smoothly, as did reboot, on Acer desktop running Windows 7 Home Premium. But I get "reboot required to complete FF installation" every time I try to start FF. Tried to uninstall FF using Control Panel uninsta
-
Hi @ all i have a problem. I formated my ipod on windows and no i can't turn it on, everytime it shows the folder with the exclamation mark. I downloaded the iPod updater to recover it, but evertime it says: Eroror at writing on hard disk. I have no