Project Server 2013 reporting database change in Schema from Project Server 2010

I have a current Project Server 2010 implementation, I am planning to migrate to Project Online.
We have Customized Reports that consume from the PS 2010 Reporting DB.
Are there differences in the Reporting DB schema  between PS 2010 and Project Online?
My Question is: if we migrated to Project Online, will the reports crash?
Another question is that, is PS 2013 Reporting DB schema the same as Project Online?

Hi Atia,
IN project server 2013 we have only one database instead of 4, it means draft, archive, published and reporting with in one database.Project Server 2013 reporting database schema tool that can be downloaded.
http://blogs.msdn.com/b/project_programmability/archive/2013/01/28/project-server-2013-reporting-database-rdb-schema-reference.aspx
There are differences in reporting of on-premises vs. Project Online
The Project Server 2013 reporting schema includes three new tables, 27 new views, and a total of 33 tables and views that include new fields.
Answer-1 : Yes there are some differences between PS 2010 and project Online.
Answer-2 : Reports will crash as In Project Online you have to use ODATA to create report. You can not query project online data for reporting directly you have to have use ODATA. 
http://msdn.microsoft.com/en-us/library/jj163015.aspx
Answer-3 : NO, PS 2013 Schema and Project online Schema is different. 
kirtesh

Similar Messages

  • Standard report which importe personnel number from  one server to other

    Dear Hcm Gurus.
    Is any standard report exist in SAP Which imports Personnel number from one server to other server which are maintained in Source server ,imported all contents maintained in source server.
    e.g  An employee is hired in  u201C Server Au201D and personnel number  is generated internally while we want to imports same employee data with same personnel number in Server u201CBu201D
    IS it possible ? if is kindly do help and clarify any standard report which import complete data from one server   to other server with all its infotypes.
    barket

    Hi,
    a standard way should be setting up an ALE scenario between the two systems to transfer employee data and keep them updated. This needs a bit more set up than a single report to be run but it is a common way to create HR landscapes where different local HR systems consolidate data to a centralized system.
    The other options are valid, too. But I know them more for transfering data for test or validation reasons.
    If you could add some more information to the business background of your requirement we could add give a better suggestion which solution to head for.
    Kind Regards
    Roman

  • Project Server 2013 reporting security

    HI
    I have a question and I have seen a couple similar ones but nothing definitive on the topic of permissions/security for Project server 2013 (in project server security mode) for either Excel(Odata) reports or for SSRS reports. 
    Even setting security aside the Out of the box configuration is certainly not elegant or even usable.
    Situation:
    In PWA project managers and team members can only see projects they, own, are team members on, or have been granted permissions explicitly to. (Pretty standard - is using security templates and "my Projects"). We are using secure store
    and impersonation for access to reports. We do have report authors groups.
    As an example a PM needs to create a weekly  status report but should not have to pull all the data back to then filter for their one project.
    However, when a PM goes to either SSRS or Excel using oData they can see every project in the company.  This is just does not make a lot of sense. Why would I hit the database for 100projects when I only care about one and yet there seems
    to be a lack of information on the topic. In contacting Microsoft we were told there was nothing we could do that is how it was designed.
    REALLY???? (see above)
    What we have come up for our approach is  that we're currently using the UserID value to set parameters in our data sources, but are looking for more 'elegant' approaches
    to security (if they exist) as there are some liabilities with this approach (EX is a report author forgets to put the parameter in the users will get everything back.
    QUESTION:
    If there is not another approach then we will stay with it. We can't imagine there isn't a better way.
    Additionally, the Project user view only contains the identity of the project owner not the rest of the team members (including sponsors who might need to see the data.) so where are they in the database?
    Tasks

    Hi Paul,
    I have a similar situation only I'm using Project Online. I have setup Groups and Categories where there is a relationship between clients and groups, and projects and categories. 
    Only issue is that when running a report a user receives an error and then all the data shows for all projects irrespective of the group/category/project relationship and the fact that user only exists in one group (and therefore can't see
    or access the other projects in PWA outside of their group.
    Hope that makes sense.
    Regards,
    Conrad

  • Project Server 2013 : Report table not updated with Published tables

    Hello Team,
    We found the issue that Publish and Reporting table have difference in work attribute. is their any way that we can refresh the Reporting table in one go.
    Thanks.

    If this issue is specific to one or few projects, using Save for sharing would be much more easier.
    If this issue is for all the projects then as NicoOosthuysen recommended RDB refresh would be the option. Having said that  you have to take extra measure before you start RDb refresh , since it is very high system resource and time consuming activity
    Steps for Save for sharing
    1. Open MS Project Pro 2013.
    2. Open the project plan from the server.
    3. Now save it locally without making changes in the File Name, using File > Share > Save For Sharing. Provide local location. Do not close Project Professional
    4. Now save back the project back to server using File > Save As (Project Name should be grayed out)
    5. Save and then publish the project plan.
    Hrishi Deshpande Senior Consultant

  • Project server 2013 olap database remains in processing state

    Hi,
    In an attempt to restore the Reporting Database in Project Server 2013, I did an archive and restore of Custom fields. Both of these events were successful, however, the Reporting database refresh kept on hanging in "Waiting to be processed status".
    Before this was noticed, the OLAP Database was configured and a build was initiated. Now the status of the PWAOLAPDatabase build just remains in the "Processing..." status.  What am I to do here? Thanks!

    Hi Jaco,
    It seems like your reporting database refresh has failed, so the OLAP DB cannot be generated either. It could be due to a large resource pool.
    See reference below:
    http://social.technet.microsoft.com/Forums/projectserver/en-US/7ac3bb1b-6621-46f0-a6c5-d9a04f770418/reporting-database-refresh-project-server-2010?forum=projectserver2010general
    http://blogs.msdn.com/b/brismith/archive/2011/07/14/project-server-2010-reporting-database-refresh-failing-with-large-resource-pools.aspx
    Note also that you can click on "processing" (as per your screenshot) to have the OLAP DB creation log in order to have more information on the status.
    Hope this helps,
    Guillaume Rouyre, MBA, MCP, MCTS |

  • Project Server 2013 Report Configuration

    Hi All,
    We are using project server 2013. We have configured the reporting server according to the below URL. But some default excel report (especially graphs) are not working i.e not showing the data. When we try to refresh the report getting the below error. is
    there any additional configuration needs to be done.
    Thanks in advance, Taj

    Hi
    Is it a Odata connection ? If it is then it might not work.
    Below is the information taken from the site
    http://office.microsoft.com/en-us/office365-suite-help/office-365-known-issues-HA102919011.aspx?CTT=5&origin=HA102901439
    Excel reports using OData connections can't be refreshed in Excel Services  
    In both Project Server and Project Online, when an Excel file is selected and displayed in the browser using Excel Services, if the Excel file has connections to the Project OData feed, a user may attempt to refresh data connections, but the refresh will
    not be successful.  
    Workaround    To refresh your data, open the file in Excel 2013, refresh the data, and then save the file back to the SharePoint document library where it resides. Next time the report is viewed using Excel Services, it will have the most
    recent data.

  • Project Server 2013 - Reporting ( Project publish ) Queue Job Error - 24006

    I am trying to publish a project and getting below error
    please provide me a solution your help greatly appreciated
    Reporting ( Project publish ) Queue Job Error - 24006 
    General
    Reporting message processor failed:
    ReportingProjectChangeMessageFailed (24006) - Object reference not set to an instance of an object.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='5a10ad83-4736-e311-941a-00155d0c1708' QueueMessageBody='Project
    UID='eaf690a4-5fda-e211-af15-b8ac6f50f278'. PublishType='ProjectPublish'' Error='Object reference not set to an instance of an object.'.
    ReportingProjectChangeMessageFailed (24006) - Object reference not set to an instance of an object.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='e412ad83-4736-e311-941a-00155d0c1708' QueueMessageBody='Project
    UID='eaf690a4-5fda-e211-af15-b8ac6f50f278'. PublishType='ProjectPublish'' Error='Object reference not set to an instance of an object.'.
    ReportingProjectChangeMessageFailed (24006) - Object reference not set to an instance of an object.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='6e15ad83-4736-e311-941a-00155d0c1708' QueueMessageBody='Project
    UID='eaf690a4-5fda-e211-af15-b8ac6f50f278'. PublishType='ProjectPublish'' Error='Object reference not set to an instance of an object.'.

    If your farm is not updated please update it  from OCT  CU for 2013 project server.
    Please update it as cumulative update is having hotfix for this issue.
    http://www.intersoft.no/blogg/item/33-april-2013s-cumulative-update-for-project-server-2013
    http://www.datazx.cn/Fv7p5a/xw-US/dc6mbbt6-btss-fxi4-s8c4-8jsribt69m8x/nnn.projectserverexpertrs
    As per the 2nd link Oct Cu for 2013 is fix this issue hence i would suggest you to upgrade from OCT CU.
    kirtesh

  • Project Server 2013 : How to Change Project owner Using PSI

    Hi,
    I have the following sets of codes for changing the project owner but both of them have not worked.
    1>
    private static bool UpdateProjectOwner()
       bool projUpdated = false;
       try
         User newOwner = projContext.Web.SiteUsers.GetByLoginName(Username);
         Guid ProjectGuid = ProjectUID;
         //Console.Write("\nUpdating owner to {1} on project: {0} ...," ProjectGuid, Username);
         DraftProject draftProjectToUpdate = projContext.Projects.GetByGuid(ProjectGuid).CheckOut();
         draftProjectToUpdate.Owner = newOwner;
         QueueJob qJob = draftProjectToUpdate.Update();
         projContext.Load(qJob);
         projContext.ExecuteQuery();
         JobState jobState = projContext.WaitForQueue(qJob, timeoutSeconds);
          QueueJob qJob2 = draftProjectToUpdate.CheckIn(false);
          projContext.Load(qJob2);
          projContext.ExecuteQuery();
          JobState jobState2 = projContext.WaitForQueue(qJob2, timeoutSeconds);
         catch (Exception ex)
           Console.ForegroundColor = ConsoleColor.Red;
           Console.WriteLine(ex.Message);
           Console.ResetColor();
       return projUpdated;
    2>
    String projectOwnerIDstrNew = Convert.ToString(dr["ProjectOwnerUID"]);                        
    String projectOwnerIDstrOriginal = Convert.ToString(project_Ds.Project[0].ProjectOwnerID);
    if (!projectOwnerIDstrNew.Equals(projectOwnerIDstrOriginal))
     Guid ownerID = new Guid(projectOwnerIDstrNew);
     project_Ds.Project[0].ProjectOwnerID = ownerID;
     project_Ds.AcceptChanges();
    bool managerChanged = true;
    Is there any mistake in these above functions ?
    If Not, then is there any other way of updating the project owner with help of PSI.

    Hi Steve,
    Are you talking about PWA or Project Pro?
    In PWA: the project has to be checked in first, then go to the "options" tab in the ribbon and unselect the checkbox that allows displaying time with the date.
    In Project Pro, it is up to users to set in the date format without the time in file\options\schedule, date format.
    In the PDP, date custom fields are displayed by default with time, the only suggestion I could make would be to create an associated custom field equal to your date field with a formula displaying only the date.
    Hope this helps.
    Guillaume Rouyre - MBA, MCP, MCTS

  • Sharepoint 2013 Reporting services not fetching data via linked server

    We have a functional SharePoint 2013 farm in production with WFE (Server 1 , windows server 2012) and WFE ( Server 2 , windows server 2012) and SharePoint databases including report server databases on  (Server 3, which SQL Server 2012 on windows
    server 2012)
    Kerberos Authentication is enabled and Windows Authentication happens. Claims to Windows Service seems to work correctly too. No double hop issue. The SharePoint Reporting Services seem to be configured correctly and Reports get generated as expected
    in the following cases.
     1. If data is being pulled from Server A (SQL Server 2008 R2 Server on Windows Server 2008), Report gets generated no issues.
     2. If data is being pulled from Server B (SQL Server 2008 R2 Server on Windows Server 2008), Report gets generated no issues.
    The problem:-
    We have a view on Server A, which is fetching data from Server B. This report does not get generated. Gives an NT/Authority logon failure. Server B is created as a linked Server on Server A. The setting to run under users security context is checked.
    If I execute Query Builder from Report Builder 3.0, the query on the view gets the data and data is displayed in the report for next 10-15 min but after that the connections gets lost or if the user logs out and logs back in, the connection is lost
    again.
    Has some one experienced a issue like this? Can a report not work on a view getting data from linked server? Or I have missed  some thing really important.
    Any help is highly appreciated?
    cheers!
    Rachna
    Rachna

    Hi,
    From your description, my understanding is that you got an error when you clicked System settings after configuring Reporting Services service application.
    What size did you use for the memory? Please make sure the server has enough memory to run SharePoint and all services.
    In addition, please open
    http://localhost:xxxxx/SecurityTokenServiceApplication/securitytoken.svc to check if there is something about this issue.
    Here is a similar post about this issue, please take a look at:
    http://whitepages.unlimitedviz.com/2012/07/setting-up-reporting-services-2012-with-sharepoint-2013/
    As this issue is about Reporting Services, I suggest you create a new thread on SSRS forum, more experts will assist you with SSRS.
    SSRS forum:
    https://social.technet.microsoft.com/Forums/office/en-US/home?forum=sqlreportingservices
    Best Regards,
    Wendy
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Exchange 2013 CU3 Databases only activate on one mailbox server

    Hi, guys
    I have two Exchange 2013 CU3 Mailbox servers installed, one DAG, 5 databases, each has one copy. I found that if I activated three databases on Mailboxserver1 or Mailboxserver2, then after a few hours, all databases will  be activated on the mailbox
    server which has three databases activated. All the databases can be activated on Mailboxserver1 or Mailboxserver2, and they work well. I disabled DAC mode for preventing Event 4133 and 4376. And it has the same problem if I enable DAC mode.
    From the event log, I found the log when activate one database on another mailbox server, it is Event 3169:
    Managed availability system failover initiated by Responder=OutlookMapiHttpDeepTestFailover Component=Outlook.
    This caused the database activated on another server.
    And I got the message from SCOM, like this:
    Alert: Health Set unhealthy
    Source: test-mbx - Outlook.Protocol
    Path: test-mbx.contoso.local;test-mbx.contoso.local
    Last modified by: System
    Last modified time: 11/12/2013 5:15:46 AM Alert description: EMSMDB.DoRpc(Logon) step of OutlookRpcDeepTestProbe/DB-01 has failed against test-mbx.contoso.local proxying to test-mbx.contoso.local for [email protected].
    Latency: 00:00:00.0320000
    ActivityContext:
    Outline: [30] EMSMDB.Connect(); [1][FAILED!] EMSMDB.DoRpc(Logon); Likely root cause: Momt
    Details:
    Error: Error returned in LogonCallResult. Error code = WrongServer (0x00000478)
    Log:     Mailbox logon verification
            EMSMDB.Connect()
            Task produced output:
            - TaskStarted = 11/12/2013
    5:15:25 AM
            - TaskFinished = 11/12/2013
    5:15:25 AM
            - ErrorDetails =
            - RespondingRpcClientAccessServerVersion
    = 15.0.712.4012
    Latency = 00:00:00.0303884
            - ActivityContext =
        EMSMDB.Connect() completed successfully.
            EMSMDB.DoRpc(Logon)
            Task produced output:
            - TaskStarted = 11/12/2013
    5:15:25 AM
            - TaskFinished = 11/12/2013
    5:15:25 AM
            - Exception = Microsoft.Exchange.RpcClientAccess.RopExecutionException:
    Error returned in LogonCallResult. Error code = WrongServer (0x00000478)
            - ErrorDetails =
            - Latency = 00:00:00.0018801
            - ActivityContext =
        EMSMDB.DoRpc(Logon) failed.
        Task produced output:
        - TaskStarted = 11/12/2013 5:15:25 AM
        - TaskFinished = 11/12/2013 5:15:25 AM
        - Exception = Microsoft.Exchange.RpcClientAccess.RopExecutionException:
    Error
    States of all monitors within the health set:
    Note: Data may be stale. To get current data, run: Get-ServerHealth -Identity 'test-mbx' -HealthSet 'Outlook.Protocol'
    State               Name                                   
    TargetResource                     HealthSet                    
    AlertValue     ServerComponent    
    NotApplicable       OutlookMapiHttpDeepTestMonitor                                            
    Outlook.Protocol              Unhealthy      None               
    NotApplicable       OutlookRpcDeepTestMonitor                                                 
    Outlook.Protocol              Healthy        None               
    NotApplicable       OutlookRpcSelfTestMonitor                                                 
    Outlook.Protocol              Healthy        None               
    NotApplicable       OutlookMapiHttpSelfTestMonitor                                             Outlook.Protocol             
    Healthy        None               
    NotApplicable       PrivateWorkingSetWarning....cclienta... microsoft.exchange.rpcclientacc... Outlook.Protocol              Healthy       
    None               
    NotApplicable       PrivateWorkingSetError....rpcclienta... microsoft.exchange.rpcclientacc... Outlook.Protocol              Healthy       
    None               
    NotApplicable       ProcessProcessorTimeWarning....ienta... microsoft.exchange.rpcclientacc... Outlook.Protocol              Healthy       
    None               
    NotApplicable       ProcessProcessorTimeError....clienta... microsoft.exchange.rpcclientacc... Outlook.Protocol              Healthy       
    None               
    NotApplicable       ExchangeCrashEventError....pcclienta... microsoft.exchange.rpcclientacc... Outlook.Protocol              Healthy       
    None               
    NotApplicable       LongRunningWatsonWarning....cclienta... microsoft.exchange.rpcclientacc... Outlook.Protocol              Healthy       
    None               
    NotApplicable       LongRunningWerMgrWarning....cclienta... microsoft.exchange.rpcclientacc... Outlook.Protocol              Healthy       
    None                
    This test is a cause that mailbox databases in DAG is doing  failover to another server
    Log Name:      Application
    Source:        MSExchangeRepl
    Date:          12.11.2013 4:49:46
    Event ID:      3169
    Task Category: Service
    Level:         Information
    Keywords:      Classic
    User:          N/A
    Computer:      test-mbx-2
    Description:
    (Active Manager) Database DB-01 was successfully moved from test-mbx.contoso.local to test-mbx-1.contoso.local. Move comment: Managed availability system failover initiated by Responder=OutlookRpcDeepTestFailover Component=Outlook.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="MSExchangeRepl" />
        <EventID Qualifiers="16388">3169</EventID>
        <Level>4</Level>
        <Task>1</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2013-11-12T00:49:46.000000000Z" />
        <EventRecordID>1606248</EventRecordID>
        <Channel>Application</Channel>
        <Computer>test-mbx-2.contoso.local</Computer>
        <Security />
      </System>
      <EventData>
        <Data>DB-01</Data>
        <Data>test-mbx.contoso.local</Data>
        <Data>test-mbx-1.contoso.local</Data>
        <Data>Managed availability system failover initiated by Responder=OutlookRpcDeepTestFailover Component=Outlook.</Data>
      </EventData>
    </Event>
    I don't know why, anyone know what's the problem?
    Thank you.
    Nile Jiang- Please mark the post as answer if it answers your question.
    http://www.usefulshare.com

    Hi,
    After deleting all the health mailboxes and restart
    the Exchange Health Manager service, the health mailboxes are recreated successfullly, but when I check the outlook.protocol health, the OutlookRpcDeepTestMonitor or the OutlookMapiHttpDeepTestMonitor is still unhealthy. How can I fix it?
    [PS] C:\Windows\system32> Get-ServerHealth -Identity 'MAILBOX1' -HealthSet 'Outlook.Protocol' | ft server,state,name,ale
    rtvalue -AutoSize
    Server   state Name                                              AlertValue
    MAILBOX1       OutlookRpcDeepTestMonitor                            Healthy
    MAILBOX1       OutlookMapiHttpDeepTestMonitor                     Unhealthy
    MAILBOX1       OutlookRpcSelfTestMonitor                            Healthy
    MAILBOX1       OutlookMapiHttpSelfTestMonitor                       Healthy
    MAILBOX1       PrivateWorkingSetWarning....cclientaccess.service    Healthy
    MAILBOX1       PrivateWorkingSetError....rpcclientaccess.service    Healthy
    MAILBOX1       ProcessProcessorTimeWarning....ientaccess.service    Healthy
    MAILBOX1       ProcessProcessorTimeError....clientaccess.service    Healthy
    MAILBOX1       ExchangeCrashEventError....pcclientaccess.service    Healthy
    MAILBOX1       LongRunningWatsonWarning....cclientaccess.service    Healthy
    MAILBOX1       LongRunningWerMgrWarning....cclientaccess.service    Healthy
    Nile Jiang- Please mark the post as answer if it answers your question.
    http://www.usefulshare.com

  • Project Professional 2013: Reports / texbox BUG

    I am using the reporting functions for a Project Status Report and found a quite annoying issue. As I need textboxes for general statements in my reports I discoverd that the navigation and correction keys (arrow-keys, backspace key, delete key, etc) are
    always doing the corresponding action for 2 characters instead of only one. EG.: After writing "WORD" and positioning the focus (prompt) behinde the "D" and pressing backspace the "RD" is getting deleted.
    I am using MS Projects Professional 2013 15.0.4551.1007. I could reproduce the issue on various installations.
    Is there anybody who can confirm this behaviour or maybe has some informations about a bugfix?
    Thank you and kind regards
    P. Slond

    Sadly, I can reproduce the error on both Project 2013 Click to Run and Project 2013 MSI with SP-1 installed.  I will make sure that this post is brought to the attention of the folks from Microsoft.  Sorry - I can't make any guesses about if/when
    this may be fixed. 
    Julie

  • SAP Crystal Server 2013 - Report Application Server failed

    Hi,
    Recently we have installed SAP Crystal Serve 2013, Installation was sucesfull. But the below servers are not started:
                  1) CrystalReports2013ProcessingServer - Running with Errors.
                  2) CrystalReports2013ReportApplicationServer - Failed.
    We tried reinstalling the application and restarted the Server intelligent agent also, still those two servers alone are not getting started, other servers hosted in the applications are working fine.
    Could anyone help me on this.
    Thanks and Regards,
    VijayanandSM

    Hi Arvind,
    I have downloaded the trial version of the application from the below link:
    Small Business BI Solutions | Crystal Server Essentials | SAP
    Can you please provide more details about the SAP Marketplace.
    I will ask my clients to register and get the correct version of the installation setup. Currently we are using Windows Server 2008.
    Thanks your reply.
    Regards,
    Vijayanand.SM

  • Project Server 2013 - Graphical Indicators - Not showing until the project is published via Project Pro 2013

    Greetings -
    I have a custom field on a PDP that is used to manually flag a project for review.  Once the field is set to "Flag" a red flag should show on the Project Summary page prompting the Portfolio Manager to follow up.  The red flag only appears
    after publishing the project via Project Pro 2013 not by just editing the PDP via Explorer (Save and Check in).
    This occurs on both projects that were created prior to the graphical indicator being added to the PDP and new projects.
    Now if instead of using the red flag graphical indicator I just used the text "FLAGGED" that would work fine.
    So is this a bug?  Or is something setup incorrectly?  Or is this how PWA is supposed to handle graphical indicators on the project summary page?
    Any help would be much appreciated.

    Hi Gunnery,
    I made the following test: I create 2 project ECF both inserted in the Project details PDP:
    for review: flag type field with graphical indicator in case value = yes
    for review_2: text type field (with a yes/no look-up table) with graphical indicator in case value = yes
    Whitout going to Project Pro, I'm able to modify the 2 fields for any project (created before or after the ECFs creation) and the graphical indicators are instantaneously shown in the summary project center view (just pressing F5).
    Note that the graphical indicator is not shown in the PDP, just the text value. Note also that I've not been to Project Pro neither to PWA/schedule PDP to publish the project plan.
    Then
    Does that correspond to your need? Can you reproduce this example and validate wheither or not it works.
    Guillaume Rouyre - MBA, MCP, MCTS

  • How to change the datasource from one server to another server?

    i need to change the datasource from development environment to production server. i had configured the JNDI informations like the following in the 'context.xml':
    <Context path="/RFT" docBase="RFT" reloadable="true">
    <Resource
    auth="Container"
    type="javax.sql.DataSource"
    driverClassName="com.microsoft.jdbc.sqlserver.SQLServerDriver"
    validationQuery="select 1"
    name="jdbc/datasource"
    username="sa"
    password="$m1sbag$"
    maxIdle="-1"
    maxActive="0"
    maxWait="5000"
    url="jdbc:microsoft:sqlserver://172.24.151.149:1433;databaseName=Projectgold" />
    <WatchedResource>WEB-INF/web.xml</WatchedResource>
    </Context>
    and in 'web.xml' included the following code:
    <resource-ref>
                         <res-ref-name>jdbc/datasource</res-ref-name>
                         <res-type>javax.sql.DataSource</res-type>
         <res-auth>Container</res-auth>
    </resource-ref>
    and mentioned the JNDI Connection Name in the .rpt file as 'jdbc/datasource', but still getting the same connection which one is configured during the report design. need a help to resolve this...
    Thanks,
    Ram

    eventhough it's working fine. I may have deployment problem. Anyway thanks for the reply.
    Regards,
    Ram

  • The Director role is optional in Lync Server 2013 - could anyone please explain why the director server has lost its importance??

    Could anyone please explain why the director has been removed from spotlight as it had much importance in LYNC 2010 and now being an optional role in LYNC server 2013.[any call flows regarding director servers would be much useful]

    Hi SJ Praveen,
    A Director is a server running Lync Server 2013 that authenticates user requests, but does not home any user accounts. Lync 2013 Front End servers have the same registrar service and functionality
    as the Director.
    The Director isn't providing any special functionality. If the Director goes down, all pools would become inaccessible when the clients queried DNS for the SRV record until an administrator
    makes a manual internal DNS change that points users to a Front End pool to handle the sign-in request from Lync clients. Microsoft has made the Director functionality relevant for organizations that have specific security requirements, such as allowing all
    external users to register to a specific internal server instead of the Front End servers. This server role is merely optional and not needed for most Lync Server 2013 deployments.
    Best regards,
    Eric

Maybe you are looking for