Project Setting for a SONY HXR_NX 30P camcorder in CS5.5.2 ???

Please advise the best setting for a Movie recording Format HD. MPEG-4 AVC/H.264 AVCHD FORMAT Ver. 2 compatible ?

The camera records avchd so pick a matching preset.
On a side note there are no project settings just sequence settings.

Similar Messages

Project Setting for Sony Steady Shot

Hi, I'm using a Sony Steady Shot camera model DSC-W330 and will like to know what project setting to match the camera.

What kind of files does that produce?
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainfo.massanti.com/

What is the correct project setting for a high definition slideshow?

I'm using Premiere Elements 11 and when I drag my jpeg photos on the timeline, I see the orange line across them; when rendered, the photos are cropped. The last time I successfully created slideshows was in PE 8 and I never had this problem!

Please do not judge the photogenic quality of the slides I picked for these two slide show examples.
The project setting is AVCHD 1080p60.
https://vimeo.com/60952115 This is a 22 second video where, as a self training exercise, I tried the resizing suggestions from Bill, Steve and Ann in other threads on this same subject. I found no improvement, or degradation, to quality or processing performance -- regardless of how I resized or didn't resize.
https://vimeo.com/60904593 This is a 20 second, 6 random slide, video to verify resizing was not needed. All the slides were brought directly from my HDD into PrE11 with the "Add Media" function. They are about 20MB each, in a Sony RAW format and original un-resized files. There were no issues in the process.
Although not demonstrated in these two videos, the Pan and Zoom feature in PrE11 works wonderfully on these un-resized photos.
Vimeo allows you do download the actual .mp4 files I uploaded if you want to look closer as the product.
It has been mentioned in other posts that resizing may well have been necessary in earlier versions of PrE and may still be needed if you lack a strong computer. Nowhere, that I can find, is it mentioned as necessary or suggested in Adobe authored instructions or tutorials.
Other than project presets or video driver issues I do not know why PrE11 slide shows work so well for me and cause problems for others.
For Steve, Ann and Bill, can I provide screen shots of PrE11 settings or samples of anything via DropBox?
Bill S

Project setting for MOD files

Does any one know the best project settings for MOD files?

They have to be converted. Probably best with MPEG Streamclip.

Project Setting for H.264-AAC

Ok,
I think I overcomplicated things when I ask which file type or codec renders the fastest...
I'll ask an easy one...
What "Project Settings" will I use if I'm planning to edit a .mp4 file with (H.264 video AAC audio) for it to be recognized as 'native'?

You can drag the Clip in the Project Panel to the New Icon, and PrPro will create a New Sequence that matches, and place that as the first Clip.
This shows the New Icon:
By Joe Bloe Premiere.
Hope that this helps,
Hunt
[Edit] Harm beat me to it. The forum Attach Image was down - like most of the fourm this AM

Which PE9 Project setting for BetaCam footage?

Hi. I'm using Premier Elements 9 and I have footage i need to edit from an oldish Sony Beta Cam.
PE9 only seems to have presets for new digital cams.
I have tried the DV standard 48khz but i'm having an issue with stuttering on moving footage
after I have burned it to DVD. What is the problem and what are my options?
Is PE9 non compatible with old anolog tape footage.
many thanks

thanks Steve/Bill
The betacam is a Sony BVP-90P
I have to download the video via a playback adapter into a DVD recorder that makes a VOB file.
I then edit this in PE9
I did an experiement on the footage. I selected a clip and in the video field options. I selected
the Reverse Field Dominance option and this seems to have erradicated the problem. ??
The problem only appears (randomly) after I burn to DVD and playback on a TV.
If I playback on a computer its fine. So i'm assuming TV's/Computer Monitors
see the world through different eyes.
Also, are VOB files OK to start with or should I try and work with AVI only?
Thanks again for your understanding and priceless wisdom!

Why does recievig partnerrequire outbound parameter setting for the message

Hi,
I was configuring the partner profiles for outbound billing and sales order cycles.Interestingly for outbound scenario, we had to maintain the settings for outbound parameters in receiving partner.
For example, if i sending ORDERS message type from sender to receiver, then after maintaining the details in partner profile(outbound parameters for sender in we20) for sender, then not only i need to put the orders details in inbound parameters for reciever, but also the outbound parameters for receiver(both inbound and out bound parameters to be filled for the message type for reciver partner).
I checked other systems and founf this is how it is being maintained in outbound cycle.But could anyone provide any insight of why this is required.I did not find anything from bd64 or others about this.
why would the outbound parameters needs to be filled for particular message type in reciver sytem, when it is only required to fill the inbound parameters only for receiver system?

I got help for this issue over at CreativeCow's FCP pages -- it turns out, all I had to do was open a new project using an easy setting and project setting for vanilla PAL 25 fps SD stuff. All of the audio was correctly brought in -- then I disconnected all of the clips, made them dual mono, reconnected them, and copied them over to my old gristly project folder.
Now I can marry these dual mono 25fps files to the video files without having FCP incorrectly compensate for "30fps" by speeding these clips up slightly, so things stay in sync.

Project settings for GoPro 2.7k in PrE12

Hi everybody,
I know there are a few threads similar to my question already but I've read them and they aren't exactly getting at what I am trying to do.
My goal is to shoot 2.7k GoPro video, adjust the image in cineform studio using the protune preset, export to 2.7k cineform AVI, and import into PrE12 where I will apply the stabilizer effect to reduce the jerkyness of my underwater scuba video, then export a 1080p MP4 file.
My idea was that since the stabilizer effect basically crops the edges of the image to achieve the stabilization I would shoot at higher resolution, on wide FOV rather than medium FOV, and after the stabilizer effect has been applied have a video somewhere between 2.7k (2704x1524) and 1080p (1920x1200). I could then export this as 1080p having avoided losing the edges of my image (by using wide FOV) and still have full 1080p resolution (by shooting in 2.7k originally).
I hope that made sense to somebody because I started getting confused myself writing it...
The problem is that I don't see a project setting for 2.7k video import. There is one for 4k and one for 1080p but nothing inbetween and I don't see a way to set a custom resolution. So I'm assuming that using the 4k project settings will result in my video being stretched and losing quality, and that the 1080p settings will defeat the purpose of my goals/ideas as I mentioned above.
Is there somebody who knows more about this software and can guide me on what I am trying to accomplish? If that includes investing in some more sophisticated software (premiere pro?) I might be willing to do that.
Thank you!

I'm facing the same challenge..
This was posted in March, and there have been no replies?!
Not even from the people behind Adobe..
DId you find how to do this already Polyknikes?

Project Presets For Editing .mov 720P

Hello, I have Drift Inovations 170HD Stealth that I would like to edit in PE11. The camera specs show that it records 1080P and 720P in .mov (h.264) format. What would be the best Project Setting for that?
Thanks!
DAVE

Dave,
That was very good news.
For the 720p25, 720p30, and 720p60, I would look at:
For 720p60
Publish+Share
Computer
AVCHD
with Presets = MP4 - HD 720p60
(Refer to details in screenshot below)
For 720p30
Publish+Share
Computer
AVCHD
with Presets = MP4 - HD 720p60
(but in this case, you are going to go under the Advanced Button/Video Tab and change the frame rate from 60 to 30.
Refer to details in screenshot below)
For 720p25
Publish_Share
Computer
AVCHD
with Presets = MP4 - HD 720p60
(but in this case, you are going to go under the Advanced Button/Video Tab and change the frame rate from 60 to 25.
Refer to details in screenshot below)
720p60
720p30
720p25
The choice of 59.94 vs 60 and 29.97 vs 30 often depends of details from your camera. But see how you do with the suggested settings.
Thanks.
ATR

Looking for help getting imovie to recognize sony DCR-SR47 camcorder

Has anyone been able to up load to imovie from sony DCR-SR47 camcorder?

It depends on which camcorder you have.
If it records onto miniDV tape (..or "microMV" tape..) then you definitely need to use FireWire; nothing else will do. Buy one at any electronics store; it's called a FireWire or DV or i.Link cable. It must have a teeny 4-pin connector at one end (..to plug into the camera..) and a larger 6-pin connector at the other end (..to plug into your Mac..)
..unless you have a new MacBook Pro, which needs a slightly different shaped 9-pin FireWire 800 connector instead of the 6-pin connector.
You cannot use a USB connection for tape-based camcorders, even if they have a USB socket ..as that's just for transferring stills, not video.
If your camcorder does NOT shoot onto tape, then you'll need to transfer via USB. That applies for all chip-based and hard-drive based camcorders, and - I think - DVD-based camcorders.
All current AVCHD camcorders use USB.
If in doubt (..but there should be no doubt..) read the camcorder's instruction book. If you can't find the instructions, download them from the manufacturer's website ..almost all instructions are available online.
But if it needs FireWire - if it's a tape-based camcorder - you CANNOT use USB.

Connect camcorder drivers for a Sony CCD-TRV608 Hi8 Camcorder for Windows 8.1. How do I SOLVE? New camcorder?

There are no drivers for a Sony CCD-TRV608 Hi8 Camcorder for Windows 8.1. How can I solve this problem? Do I need to buy a newer or different model that plays video8 and videoHi8 tapes that IS compatible? Its a shame because I searched for months for the power cord and bought connecting cords for USB and the old fashion three RCA plugs for a VHS VCR and now I cant use them.

Dear Comrade VideoGeek, Yes, I am extremely frustrated, and you have my sincere apology if I was rude to you. I should have known better than to say unwise and unkind things to you. My bad entirely. Sorry!! The things you don't know are that Windows 8.1 does not under ANY circumstances acceps USB video streaming. Not from my camera and not from Dazzle or ANY other device or cable. That is written into STONE by Microsoft. Can't do nothing about it. That's a barrier that cannot be broken or worked around. The other thiing you don't know is that I do not have RCA outlets on my camera. I bought it assuming it must have as most devices until then did and got it home in 2001 or whenever and found to my great dismay that it ONLY has a USB output. Not multicolored RCA jacks of any kind. That is also a barrier that I cannot break unless I buy a used camera that takes my tapes and DOES have RCA outputs. My bad. I should have returned it immediately at the time, unfortunately I was too ill at the time to do so. I know you were only trying to help. I'm sorry if I was snippy with you. You were extremely kind to try to help. And I appreciate you. Hopefully other people will see your answers and they will help them. Meanwhile, I'm banging my head against the Apple walls trying to find out which product of theirs MAY be able to work for me and which is the best solution for me all around and that too is a nightmare. Thank YOU for being so kind!! And for respoding with kindness.

I have a Mac OS X and a Sony HDR-CX7 camcorder. When I get onto the sony webpage to download program to import movies onto my Mac, they only have downloads for Windows. How can I get a program for my Mac?

I have a Mac Os X and a Sony HDR-CX7 camcorder. When I get onto the Sony webpage to download the program so I can import my movies, they only have programs Windows. How do I get this for my Mac.

You shouldn't need any application except what you already have: iMovie, iDVD, iPhoto....
To check on compatibility with your model camcorder, check these out:
https://support.apple.com/kb/HT3290
http://support.apple.com/kb/TS3356
Some formats are not readable by the above; you can use something like MPEG Streamclip to convert the footage or Quicktime Pro (as mentioned in one of the articles).

Str Loc Mandatory Setting for Project System PR

Hi
How can i make mandatory setting for a PR getting generated by project system thro the trans CJ20N.
Since its not an mandatory field the PR s from project based are not hv str loc in PR.
Also we are not able to edit the same. All the fileds are in PR in ME52N in grey colour whr the PR s from project based.
Vijay

if your material is not inventory managed, then you cannot have a storage location in the PR.
If it is inventory managed, then you can set the defautl storage location in material master MRP view field Storage location EP

Support for older Sony camcorder

Hello. I have iMovie '09 on my new iMac. I just acquired an older Sony DCR-VX1000 camcorder that uses Mini DV tapes. I need to invest in new batteries, a charger, a DV cable, and a repair before actually using this camcorder but I wanted to know before I did.......Will iMovie support this camcorder? Will I have any other issues? Thanks in advance for any response.

You just need to know what kind of Firewire port you have on your iMac.
Older iMacs will have Firewire 400. You need a 6 pin to 4 pin Firewire Cable to connect your camera.
If you have a newer iMac, you may have a Firewire 800 port. In this case, you need a 9 pin to 4 pin Firewire cable.
Click /About This Mac/More Info.../Firewire (under the hardware list). If it says Firewire Bus...Maximum Speed up to 800 Mb/S, that is Firewire 800. If max is 400Mb/S or so, that is FW400.

FCP 5.1.2 upgrade now no communication with Sony FX1 HDV Camcorder

Hi - I recently upgraded to FCP 5.1.2 then tried to capture footage with my Sony FX1 HDV camcorder, but the software indicates that it cannot initialize my device. The only way it will work is when I change the capture settings to HDV Apple Intermediate Codec, but then this setting requires rendering.
The camcorder works fine in iMovie, so I know it is not that. If I reinstall FCP 5.1, then everything works fine, but not with the 5.1.2 upgrade.
I've also tried "trashing" my FCP settings for a fresh start, but nothing changed. I checked the settings on the camera, but they are fine. Again everything works in iMovie. Finally, I also removed the recommended QT files and reinstalled QT, but no change.
Any suggestions? I'd just stay at FCP 5.1, but I now have several projects in 5.1.2 that are not backward compatible.
Thanks!
Michael
G5 Quad Mac OS X (10.4.8)

This worked for me. Probably something in this sequence caused Firewire, FCP or the Digital Mystery Gods to re-align:
1. Simplify the Firewire routing among external hard drives. On its own this didn't produce a positive result, but it may have contributed somehow. In particular, avoid multiple loops among hard drives. Not a likely suspect, because the Z1U was directly connected to the front Firewire jack.
2. From the FCP Install/upgrade/crossgrade disks, load the latest QMaster software. It's in the Extras folder and is called AppleQmasterNode.mpkg.
3. Reload from the same upgrade disks a fresh FCP. It won't have the latest enhancements—and that may be an issue—but it will reload. Uncheck the rest of the options when loading this in. FCP seems to be the only program with a connection issue.
4. Update the reload. Software update now brings FCP 5 up to FCP 5.1.2 but I would swear I saw 5.1.3 in the update download. Perhaps not. The result says 5.1.2 and now it recognizes what only iMovie HD had recognized before; the Z1U camera.
I know a lot of folks seem to have parallel-sounding issues. A lot of advice seems to focus on "toss the prefs", "fix the permissions", "sprinkle the chicken blood", etc. but none of those had any effect on this issue for me.
The one thing I THINK worked was the QMaster/FCP second re-upgrade.
-iNova
G5 dual Mac OS X (10.4.8) plenty of RAM, all other systems seem nominal

Project Setting for a SONY HXR_NX 30P camcorder in CS5.5.2 ???

Similar Messages

Maybe you are looking for