Project Setting for Sony Steady Shot

Hi, I'm using a Sony Steady Shot camera model DSC-W330 and will like to know what project setting to match the camera.

What kind of files does that produce?
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainfo.massanti.com/

Similar Messages

  • Project Setting for a SONY HXR_NX 30P camcorder in CS5.5.2  ???

    Please advise the best setting for a Movie recording Format HD. MPEG-4 AVC/H.264 AVCHD FORMAT Ver. 2 compatible ?

    The camera records avchd so pick a matching preset.
    On a side note there are no project settings just sequence settings.

  • What is the correct project setting for a high definition slideshow?

    I'm using Premiere Elements 11 and when I drag my jpeg photos on the timeline, I see the orange line across them; when rendered, the photos are cropped.  The last time I successfully created slideshows was in PE 8 and I never had this problem!

    Please do not judge the photogenic quality of the slides I picked for these two slide show examples.
    The project setting is AVCHD 1080p60.
    https://vimeo.com/60952115 This is a 22 second video where, as a self training exercise, I tried the resizing suggestions from Bill, Steve and Ann in other threads on this same subject.  I found no improvement, or degradation, to quality or processing performance -- regardless of how I resized or didn't resize.
    https://vimeo.com/60904593 This is a 20 second, 6 random slide, video to verify resizing was not needed.  All  the slides were brought directly from my HDD into PrE11 with the "Add Media" function.  They are about 20MB each, in a Sony RAW format and original un-resized files.  There were no issues in the process. 
    Although not demonstrated in these two videos, the Pan and Zoom feature in PrE11 works wonderfully on these un-resized photos.
    Vimeo allows you do download the actual .mp4 files I uploaded if you want to look closer as the product. 
    It has been mentioned in other posts that resizing may well have been necessary in earlier versions of PrE and may still be needed if you lack a strong computer.  Nowhere, that I can find, is it mentioned as necessary or suggested in Adobe authored instructions or tutorials. 
    Other than project presets or video driver issues I do not know why PrE11 slide shows work so well for me and cause problems for others.
    For Steve, Ann and Bill, can I provide screen shots of PrE11 settings or samples of anything via DropBox?
    Bill S

  • Help with correct setting for Cannon Power shot SX20 IS Sport setting. Blurred

    Looking for advise on camera setting for action shots. All the photo's on "Sport " setting are blurred. "Auto" and I miss the action. I thought this camera was suitable for taking some decent shots of my son on the lacrosse field. Look forward to hearing back from someone.
    Thanks~

    SEE
    http://forums.usa.canon.com/t5/EOS/The-50D-has-a-sports-mode-What-is-the-same-mode-on-the-7D/m-p/152...
    "A skill is developed through constant practice with a passion to improve, not bought."

  • Project setting for MOD files

    Does any one know the best project settings for MOD files?

    They have to be converted. Probably best with MPEG Streamclip.

  • Best sequence setting for Sony HXR-NX5U (1920x1080)? Also, why use Sony Content Browser?

    Hello,
    I'm using Premiere CS 5.0 and I am hoping to find a sequence setting that doesn't require me to render footage from my new camera, a Sony HXR-NX5U. 
    Can anyone help me out?  Also, does anyone use Sony's Content Browser?  If so, why?  It seems like a wasted extra step in the workflow.

    Try this...
    See 2nd post for picture of NEW ITEM process http://forums.adobe.com/message/3776153
    -and a FAQ on sequence setting http://forums.adobe.com/message/3804341

  • Project Setting for H.264-AAC

    Ok,
    I think I overcomplicated things when I ask which file type or codec renders the fastest...
    I'll ask an easy one...
    What "Project Settings" will I use if I'm planning to edit a .mp4 file with (H.264 video AAC audio) for it to be recognized as 'native'?

    You can drag the Clip in the Project Panel to the New Icon, and PrPro will create a New Sequence that matches, and place that as the first Clip.
    This shows the New Icon:
    By Joe Bloe Premiere.
    Hope that this helps,
    Hunt
    [Edit] Harm beat me to it. The forum Attach Image was down - like most of the fourm this AM

  • Which PE9 Project setting for BetaCam footage?

    Hi. I'm using Premier Elements 9 and I have footage i need to edit from an oldish Sony Beta Cam.
    PE9 only seems to have presets for new digital cams.
    I have tried the DV standard 48khz but i'm having an issue with stuttering on moving footage
    after I have burned it to DVD. What is the problem and what are my options?
    Is PE9  non compatible with old anolog tape footage.
    many thanks

    thanks Steve/Bill
    The betacam is a Sony BVP-90P
    I have to download the video via a playback adapter into a DVD recorder that makes a VOB file.
    I then edit this in PE9
    I did an experiement on the footage. I selected a clip and in the video field options. I selected
    the Reverse Field Dominance option and this seems to have erradicated the problem. ??
    The problem only appears (randomly) after I burn to DVD and playback on a TV.
    If I playback on a computer its fine.  So i'm assuming TV's/Computer Monitors
    see the world through different eyes.
    Also, are VOB files OK to start with or should I try and work with AVI only?
    Thanks again for your understanding and priceless wisdom!

  • Why does recievig partnerrequire outbound parameter setting for the message

    Hi,
        I was configuring the partner profiles for outbound billing and sales order cycles.Interestingly for outbound scenario, we had to maintain the settings for outbound parameters in receiving partner.
    For example, if i sending ORDERS  message type from sender to receiver, then after maintaining the details in partner profile(outbound parameters for sender in we20) for sender, then not only i need to put the orders details in inbound parameters for reciever, but also the outbound parameters for receiver(both inbound and out bound parameters to be filled for the message type for reciver partner).
    I checked other systems and founf this is how it is being maintained in outbound cycle.But could anyone provide any insight of why this is required.I did not find anything from bd64 or others about this.
    why would the outbound parameters needs to be filled for particular message type in reciver sytem, when it is only required to fill the inbound parameters only for receiver system?

    I got help for this issue over at CreativeCow's FCP pages -- it turns out, all I had to do was open a new project using an easy setting and project setting for vanilla PAL 25 fps SD stuff. All of the audio was correctly brought in -- then I disconnected all of the clips, made them dual mono, reconnected them, and copied them over to my old gristly project folder.
    Now I can marry these dual mono 25fps files to the video files without having FCP incorrectly compensate for "30fps" by speeding these clips up slightly, so things stay in sync.

  • Project settings for GoPro 2.7k in PrE12

    Hi everybody,
    I know there are a few threads similar to my question already but I've read them and they aren't exactly getting at what I am trying to do.
    My goal is to shoot 2.7k GoPro video, adjust the image in cineform studio using the protune preset, export to 2.7k cineform AVI, and import into PrE12 where I will apply the stabilizer effect to reduce the jerkyness of my underwater scuba video, then export a 1080p MP4 file.
    My idea was that since the stabilizer effect basically crops the edges of the image to achieve the stabilization I would shoot at higher resolution, on wide FOV rather than medium FOV, and after the stabilizer effect has been applied have a video somewhere between 2.7k (2704x1524) and 1080p (1920x1200).  I could then export this as 1080p having avoided losing the edges of my image (by using wide FOV) and still have full 1080p resolution (by shooting in 2.7k originally).
    I hope that made sense to somebody because I started getting confused myself writing it...
    The problem is that I don't see a project setting for 2.7k video import.  There is one for 4k and one for 1080p but nothing inbetween and I don't see a way to set a custom resolution.  So I'm assuming that using the 4k project settings will result in my video being stretched and losing quality, and that the 1080p settings will defeat the purpose of my goals/ideas as I mentioned above.
    Is there somebody who knows more about this software and can guide me on what I am trying to accomplish?  If that includes investing in some more sophisticated software (premiere pro?) I might be willing to do that.
    Thank you!

    I'm facing  the same challenge..
    This was posted in March, and there have been no replies?!
    Not even from the people behind Adobe..
    DId you find how to do this already Polyknikes?

  • Project Presets For Editing .mov 720P

    Hello, I have Drift Inovations 170HD Stealth that I would like to edit in PE11.  The camera specs show that it records 1080P and 720P in .mov (h.264) format.  What would be the best Project Setting for that?
    Thanks!
    DAVE

    Dave,
    That was very good news.
    For the 720p25, 720p30, and 720p60, I would look at:
    For 720p60
    Publish+Share
    Computer
    AVCHD
    with Presets = MP4 - HD 720p60
    (Refer to details in screenshot below)
    For 720p30
    Publish+Share
    Computer
    AVCHD
    with Presets = MP4 - HD 720p60
    (but in this case, you are going to go under the Advanced Button/Video Tab and change the frame rate from 60 to 30.
    Refer to details in screenshot below)
    For 720p25
    Publish_Share
    Computer
    AVCHD
    with Presets = MP4 - HD 720p60
    (but in this case, you are going to go under the Advanced Button/Video Tab and change the frame rate from 60 to 25.
    Refer to details in screenshot below)
    720p60
    720p30
    720p25
    The choice of 59.94 vs 60 and 29.97 vs 30 often depends of details from your camera. But see how you do with the suggested settings.
    Thanks.
    ATR

  • What format to export fcdp project recorded on sony z1 for dvd studio pro

    what format do I export a Final Cut Studio project recorded on sony z1 HDV for dvd studio pro. I am getting lines on the edges if I export current settings.

    finalcut.ie wrote:
    he says sd is this right when i want a hd dvd?
    HD-DVD is a dead format. It may play on your mac - or an HD-DVD set top player, if you happen to have one - but nowhere else. If you just want playback on your mac, compress to h.264 with your current frame size. If you want a DVD it will have to be SD and Mpeg-2 as Shawn already explained.
    mish

  • I am trying to determine the new project preset for multi-camera video shot as follows:  3 Canon camcorders, main shot is DV (tape) (720x480), b-roll is DVD (mini-disk) (720x480), additional b-roll is AVCHD (1920x1080).  Film is from a wedding, DV contain

    I am trying to determine the new project preset for a multi-camera video shot as follows:  3 Canon camcorders,
    Main shot is DV (tape) (720x480, 29fps) - ceremony and reception
    b-roll is DVD (mini-disk) (720x480, 29fps) - bride preparations
    additional b-roll is AVCHD (1920x1080, 29fps) - groom preparations and misc all day ceremony and reception. 
    Film is from a wedding, DV contains main footage so I assume it will need to be the base.  I am planning to use the preset for DV-Widescreen.  Is there a better option?  I'm concerned about playback as the three appear to have different PAR.  I'm using Premiere Elements 10 on W8.
    Ultimately this will be burned for two formats - one for a DVD that can be watched on a widescreen TV, second for a short clip trailer to go on vimeo.
    (And no I won't be doing this again for a wedding that I shoot.)

    VDRAVES
    Please review since I am not sure how you obtained Video 3 tall when you scaled Video 3 with Constrain Proportions in effect.
    Before
    After
    It becomes a zoomed in effect to get rid of the black borders. But, there is no tall and thin involved anywhere.
    And, after the Scale increase, you can always click on the screen and move the image around a bit
    (without overdoing it to get black borders again).
    After and an adjust
    Please let us know if you are OK with the information above.
    Thank you.
    ATR

  • Str Loc Mandatory Setting for Project System PR

    Hi
    How can i make mandatory setting for a PR getting generated by project system thro the trans CJ20N.
    Since its not an mandatory field the PR s from project based are not hv str loc in PR.
    Also we are not able to edit the same. All the fileds are in PR in ME52N in grey colour whr the PR s from project based.
    Vijay

    if your material is not inventory managed, then you cannot have a storage location in the PR.
    If it is inventory managed, then you can set the defautl storage location in material master MRP view field Storage location EP

  • Can i use the lightning to usb camera adapter for sony cybershotdsc-w380

    DDoes anyone know how to use a lightning to sub camera adapter for a Sony cyber shot doc-w830

    This discussion may help.
    It mostly depends on the camera. Some cameras have a Transfer Mode, which does not attempt to charge while transferring pictures. does yours have such a setting?
    Alternatively you can try to plug a powered USB hub between the camera and the USB connector so the power is provided by the HUB rather than the iPad.
    Other than that, yes the Memory card reader may be a better option assuming your Camera uses Secure Digital (SD) type memory cards.

Maybe you are looking for