Project settings for GoPro Hero 3 Black Edition Protune 2.7k 24p

I am trying to figure out what setting to use to import Protune 2.7k 24p clips into Premiere CC 2014
I am trying to avoid using GoPro Studio and transcoding there, yet is this the only way to do this?
I can of course load in a GoPro .mp4 Protune file directly into Premiere but I have no idea which preset to use.
Thanks

Use MpegStreamclip (free) to convert the files to Apple Intermediate Codec (AIC).
You must record in or convert the files to 30 fps mode as FCE only works in that frame rate.
x

Similar Messages

Export Settings for GoPro Hero 3?

I have some footage from GoPro Hero 3 Black. It's 1080p 60fps wide. When I export it from Adobe Premier Pro CS6 the quality is not the same as the original clip. What settings and format are you guys using? Could someone please provide the details as far as the exact format you are using and your settings? I would really appreciate it. I've tried several, e.g. windows media and played around with various options, still the output is crappy.
This is what I get btw: http://www.youtube.com/watch?v=c2IP2aBKiBs You can see that the quality even in 1080p is subpar.

It certainly isn't the cleanest video I have ever seen.
First of all, did you put it into a sequence by dropping the video on to the "New Item" button so that the sequence is the correct size and number of frames per second?
Second, try exporting to H.264 and use the "Match Source High Bitrate" and then increase the bit rate even more. And maybe use a two pass VBR.

Importing slow motion sequenze (848 x 480) from GoPro Hero 3 black edition in FC

How can I import a slow motion sequenz from my Hero GoPro black edition into Final Cut? The original has a resolution of 848 x 480. After the import Final Cut makes this sequenze a little bit larger (640 x 480), resulting that part of sharpness is lost.

When dropping the clip into the timeline for the first time, try setting the Video Properties Format to NTSC SD and Resolution to 720x480 DV Anamorphic. Clips of your resolution should fit and leave a bit of pillarboxing on the sides. To ensure you're playing it back at the best image quality, go to Playback Preferences, and set Playback Quality to High Quality.

Project settings for GoPro 2.7k in PrE12

Hi everybody,
I know there are a few threads similar to my question already but I've read them and they aren't exactly getting at what I am trying to do.
My goal is to shoot 2.7k GoPro video, adjust the image in cineform studio using the protune preset, export to 2.7k cineform AVI, and import into PrE12 where I will apply the stabilizer effect to reduce the jerkyness of my underwater scuba video, then export a 1080p MP4 file.
My idea was that since the stabilizer effect basically crops the edges of the image to achieve the stabilization I would shoot at higher resolution, on wide FOV rather than medium FOV, and after the stabilizer effect has been applied have a video somewhere between 2.7k (2704x1524) and 1080p (1920x1200). I could then export this as 1080p having avoided losing the edges of my image (by using wide FOV) and still have full 1080p resolution (by shooting in 2.7k originally).
I hope that made sense to somebody because I started getting confused myself writing it...
The problem is that I don't see a project setting for 2.7k video import. There is one for 4k and one for 1080p but nothing inbetween and I don't see a way to set a custom resolution. So I'm assuming that using the 4k project settings will result in my video being stretched and losing quality, and that the 1080p settings will defeat the purpose of my goals/ideas as I mentioned above.
Is there somebody who knows more about this software and can guide me on what I am trying to accomplish? If that includes investing in some more sophisticated software (premiere pro?) I might be willing to do that.
Thank you!

I'm facing the same challenge..
This was posted in March, and there have been no replies?!
Not even from the people behind Adobe..
DId you find how to do this already Polyknikes?

Problema de congelar (invoice GoPRO HERO 3+ Black Edition with problems)

Hello, first I'm sorry for bad English.
I won the gift of a camera GoPro Hero 3+ Serial number: {removed per forum guidelines}, which is presenting manufacturing problems.
GoPro has already contacted me for replacement, however I need a duplicate invoice.
The purchase was held in Orlando, Florida 32839 on 05/26/2014.
What information is required so that I get a receipt?
I need it, to trigger the guarantee.
Thanks

Hello arthurreis,
Thank you for joining us on Best Buy Unboxed. You ask a great question and I'm happy to help.
I'll need some information from you to begin my research, so please watch for a private message from me. To check your forum inbox, ensure that you have signed in with your user name and password, then click on the envelope icon in the upper right of this page.
I look forward to working with you.
Sincerely,
John|Social Media Specialist | Best Buy® Corporate
Private Message

Best project & export settings for GoPro 1080p 30fps - YouTube

Hi all,
Just made a new video for YouTube and it's come out a little grainy, no where near as good as the original. I know YouTube compresses footage but looking at other users with the same equipment my video quality is sub par, I seem to be editing them incorrectly causing quality loss. Footage has lot's of motion:
★ HD YAMAHA RAPTOR 700 TRAIL RIDING, OFFROAD & SUSPENSION SETTINGS! QUAD BIKE ATV ★ed - YouTube
My other videos don't seem as bad, not perfect, but maybe as this one had less light and lot's of bumps/motion it's finally come to light that something is not right.
For example look at this video, same equipment etc, similar conditions, but quality is much higher:
[HD] Raptor 700 GOPRO HERO 3 BLACK HD 1080p 2014 Raptor 700 x2 Riding in NYC - YouTube
Quite a big difference right?
I didn't realise there were project settings lol, I checked and it's set at 25FPS but my footage is 30FPS, would this cause issues? Export wise I did
I need help with project settings and export settings, can someone tell me what information you need from me to ascertain this?
Many thanks,
Toby

Toby
If you have source media = GoPro 1080p30, then your project preset should be
NTSC
DSLR
1080p
DSLR [email protected] or DSLR 1080p30 if the camera specification says 30 instead of 29.97 frames per second.
Either you set it manually or you make sure that the project is setting it automatically correctly.
ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
When you go to export that to YouTube from within the Premiere Elements YouTube feature, you use the
preset = High Definition Video for Youtube - 1920 x 1080.
If you exceed the file size/duration limit of the YouTube feature within Premiere Elements, then you export the
Timeline to a file saved to the computer hard drive. Next you upload that file to YouTube at the YouTube web site.
YouTube extended time accounts do not work in the YouTube feature within the program. The suggested file for
this route would be
Publish+Share
Computer
AVCHD
with Presets = MP4 - H.264 1920 x 1080p30.
Please review and consider. If any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

Which project settings for project for Canon Powershot Video Editing?

Which project settings for project for Canon Powershot Video Editing?
I want to edit video taken with a Canon Powershot SD 550 taken in NTSC 640 x 480. When I start a new project, which project settings should I be using? Also when exporting the project to view on a computer should I stick with the AVI or will MPEG or another universal format give me better end quality?

Hunt,
This user has two thread topics here that are identical to ones at the forum which I frequent. Early on I downloaded video from the Canon Powershot that he says he is using for the basis of my comments. So, I have put that video through gspot myself. Since the user is going between the two forums (mostly here), I did not want anything lost in the back and forth. The goal is to help attainment of the goal. That is why I am including comments at both locations:
At The Other Forum
Project Settings Thread
http://www.elementsvillage.com/forums/showthread.php?t=52299
Rotation Thread
http://www.elementsvillage.com/forums/showthread.php?t=52298
The user has gotten back to me on the video rotation issue, thanking me, but telling me that another workflow was identified...and, as I note, generously shared with both sites. I am in the process of personally checking out what he said worked for him in that regard. However, the user has not gotten back to me on the topic of project settings.
So to expedite matters, when you get a chance, could you please check out my comments in that thread? I would be interested in your perspective on the matter and what I wrote.
Thanks.
ATR

GoPro Hero 3 Black .mp4 footage import--current best way?

I've read a lot in these forums about importing .mp4 footage into FCPX. It seems that it used to be the case (and maybe still is?) that FCPX either wouldn't import .mp4 files, or wouldn't do a good or reliable job if it did.
I've been shooting some footage with a GoPro Hero 3 Black. FCPX seems to import it just fine. But I'm not sure if that's the best way to do it? Should I be using another program (like GoPro's Cineform software) to first convert the Hero 3 .mp4 files to .mov files? Or should I just let FCPX do it?
Also, I noticed something that seems odd when I'm importing these .mp4 files: If I import them directly from the SD card that the GoPro stores them on, I can select in and out points in the .mp4 clips I'm importing. But if I first copy the .mp4 files from the SD card to one of my hard drives, I cannot select in and out points when importing (I have to import the entire clip). Why is this?
(I should mention, in case it is relevant, that the clips I cannot select in and out points for [the ones that I first copied to my hard drive] are 1080p 60 fps, and the ones that I can select in and out points for [the ones I'm importing directly from the card] are 720p 120 fps.)

This is easy. I do it all the time. FCPX ingests GoPro footage just fine. Optimize, and you're good to go.
BTW: A common hiccup occurs when dealing with over-cranked footage. (60fps or 120fps.) Be sure to "conform speed" to actuate the slo-mo. 'Tis also important to designate your project / timeline at 24fps or 30fps to realize the speed difference.
I've gotten burned in the past. I'll drag my over-cranked GoPro footage to the timeline. As it is the "first" clip layed into the timeline, the project assumes THAT speed as a default. (As per my preferences.) Thus, when I "conform speed," nothing seems to happen. That's because my project is displaying at the higher rate. A 60fps timeline showing footage shot at 60fps looks "normal speed."
FYI. (And disregard if you know all this.)

Correct PPro CS3 Project Settings for Neoscene/Cineform 1080 60i .avi files?

I am looking for clarification on the correct Premiere CS3 project settings for AVCHD 1080 60i NTSC files converted with Neo Scene with the "maintain source frame format" option.
Should the PPro project settings for "Field" be upper or lower field first?
On a Cineform discussion board I was told all interlaced HD footage is upper field first.
However, I have found that a PPro project setting of upper field first results in much more sluggish playback than lower field first.
So seems there is additional processing needed with the upper field first project setting and this suggests to me that lower field first is the proper setting.
Any thoughts from NeoScene/Cineform users out there?
Thanks!
The project settings I have been using are:
Editing Mode: Desktop
Timebase: 29.97
Frame size: 1920 x 1080
Pixel Aspect Ratio: Square Pixels (1.0)
Fields: Lower Field First
Audio: 48000

...is not so good - bad colours. In Microsoft DV Avi-DV Pal compression. D1/DV PAL Wide is pixelate. I have click the de-interlace so it is not because of that. I have no problem to use encore it the file i send is compressed in those settings i mention before. I have no problems in compressing the file with those settings at all, like i have when i want to transfor the video in avi uncompressed.
Oaaa...i am going crazy here. I have had so many problems with this and if i end up working this documentary and not beeing able to export it i go mad!...this if i do not go there before because of this problems...

GoPro Hero 4 Black got stuck whenever I turn on

Hello, I'm Hoang Nguyen
I just bought a Hero 4 Black Edition at Apple store Japan by ordering from the official website of Apple.
Order number: W2********
Serial number : C3*********521
Order day : 2015/01/12
Version : 1.02.00
When I received this camera, It worked fine for the first few days. After that, It started to freeze until now. I can not do anything at the moment. I have tried so many tips on the internet about format, reset, hard reset, whatever that posted on the internet. I tried all but it is useless.
I want to know that may I have a fully guarantee from Apple Japan ?
These photo shows the text BUSY stuck all the time when I turn the camera on. Battery in full but It displays like charging.
I am really mad when I paid for a large money on this camera and it doesn't work well. Please help me !
Thank you !
Sincerely,
<Personal Information Edited by Host>

You may have purchased it through Apple, but it's not an Apple product. Contact the makers of the camera.
Various phone numbers by location on this page.

GoPro HERO 3 black.

Hello,
I have a one question is GoPro HERO 3 black available in stores now?
Or i have to Pre-order it or what?
I just want to go store and buy it.

Hey repsuke,
Thanks for getting back to me on this. The only store in El Paso that might have one of these in stock is the store on Viscount Blvd. The best I can suggest is to try calling them, and ask if they can physically verify that this is in stock. All the stores in El Paso have this on order.
Thanks,
Allan|Senior Social Media Specialist | Best Buy® Corporate
Private Message

IPad and go pro hero 3 black edition ?

How do I get my iPad and my go pro hero 3 black edition work together ?

According to their website, they'll finally release the Hero3 Black app December 14. Interesting since they'd said all along it'd be mid-December. Seems to me either they are racing to have it ready or they could have just posted it when it was ready... http://gopro.com/software-app/gopro-app

[svn:fx-trunk] 7801: Submit on behalf of Pete - an update to the project settings for the flex4test project , the link type was wrong.

Revision: 7801
Author:   [email protected]
Date:     2009-06-12 14:38:25 -0700 (Fri, 12 Jun 2009)
Log Message:
Submit on behalf of Pete - an update to the project settings for the flex4test project, the link type was wrong.
Doc Notes: None
Bugs: None
Reviewer: none
tests: compile & run
Modified Paths:
    flex/sdk/trunk/development/eclipse/flex/flex4test/.actionScriptProperties

Wait a second...there is more to that error message that I overlooked before.
There might be something other than just the way I set the CODE and CODEBASE parameters wrong here
Any ideas?
Here is the entire messsage:
load: class DisplayMonoApplet.class not found.
java.lang.ClassNotFoundException: DisplayMonoApplet.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more

Go Pro Hero 3 Black edition files are unsupported?

This is the second time I imported some photos into my Aperture library from my Go Pro Hero 3 Black edition camera and I get a message that says my files which are in the JPEG format are not supported. It tells me that I need to download the photos to a location on my computer or hard drive first but the weird thing is that it WILL import into Aperture too. Its like its making me back them up to another location before it imports into Aperture. Why is this? Is there something I can do to just make the files supported?

First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
If that doesn't help try adding a new video to your Camera Roll. Perhaps the update process caused the problem. If a new video plays correctly then reload your older videos from your backup.
Perhaps some other users can provide more assistance.

Sequence settings for gopro

what is the best sequence setting for a gopro hero 2 ?

You can safely cancel that first sequence dialog when creating a new project and follow the advice from post 1.
A wrong sequence could make playback more difficult, but often the more likely reason is that your computer simply isn't up to it. You may need better hardware. An i7 3770K or i7 3930K are what I'd consider starting points for smooth editing of this material.

Project settings for GoPro Hero 3 Black Edition Protune 2.7k 24p

Similar Messages

Maybe you are looking for