[Project siena]How to get random table and check if answer is good
Hey, i have excel file with one table with: state and capital fields.
I want to randomly (After pressing button) get state. then when i write in input field capital of this state i want to get answer wrong/good. How can i do this?
Assuming:
The table is called Table1, and it has at least State and Capital columns.
The input field is called Text1.
Put the following in the OnSelect property of a button:
If(Lower(Text1!Text) = Lower(Question!Capital) ,UpdateContext({Question: First(Shuffle(Table1))}))
Create a label, and set its Text property to:
Question!State
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This is beneficial to other community members reading the thread.
-Bruton
Similar Messages
-
How to get the table and column details out of desinger database design?
what is the relation between ci_table_definition, ci_columns, ci_constains and ci_check_constaints?
I want to get the report on table detail of tablenames, column names, comments, datatype+length and check constraints.
thanksHi,
The link is pretty straightforward:
ci_table_definitions.id = ci_columns.table_reference
(also correct: ci_table_definitions.ivid = ci_columns.parent_ivid)
ci_table_definitions.id = ci_check_constraints.table_reference
Remember to set the Workarea Context - jr_context.set_workarea(' Name of Workarea') - before you start querying, especially when your Repository is versioned.
good luck.
Lucas -
How to get the table of value field? and can we expand the technical limits
Dear
I have created value field in COPA with KEA6. And now, I need the table which the value fields are saved. Yet, I have tried a lot to find it and get failure? Can any guy help me? Please tell me how to get the table of a value field.
And another question is that, can we extend the technical limits for the number of value field for ECC6.0?
We have a note for R.4.x Please see below:
OSS note 160892
You can display the length of a data record using Transaction KEA0 ('Maintain Operating Concern'). After you have navigated to the 'Characteristics Screen' or to the 'Value field Screen' choose menu path 'Extras -> Technical Limits'.
The maximum displayed here under 'Length in bytes on the DB' is the maximum length permitted by the Dictionary. The reserve required for the release upgrade must be subtracted from this value.
To increase the allowed number of the value fields, increase the value that is assigned to field ikcge-bas_max_cnt (FORM init_ikcge_ke USING fm_subrc, approx. line 165) in Include FKCGNF20. It specifies the number of the possible value fields. The corresponding part of the source code is attached to the note as a correction.
David Sun
Regards!how to extend the limit of value numbers? please see the original question.
-
How to get pivot table by using dates
Hi,
How to get pivot table by using dates in column.
Below is the sample table and its value is given.
create table sample1
Order_DATE DATE,
order_CODE NUMBER,
Order_COUNT NUMBER
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('30-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),1,232);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('30-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),2,935);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('30-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),3,43);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('30-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),4,5713);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('30-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),5,11346);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('29-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),1,368);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('29-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),2,1380);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('29-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),3,133);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('29-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),4,7109);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('29-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),5,14336);
select * from sample1;So how to get the data like below.
order_date
order_code 30-sep-12 29-sep-12
1 232 368
2 935 1380
3 43 133
4 5713 7109
5 11345 14336Using the extra data I inserted in my previous reply:select ORDER_CODE,
SUM(DECODE(extract (month from ORDER_DATE),1,ORDER_COUNT,0)) JAN,
SUM(DECODE(extract (month from ORDER_DATE),2,ORDER_COUNT,0)) FEB,
SUM(DECODE(extract (month from ORDER_DATE),3,ORDER_COUNT,0)) MAR,
SUM(DECODE(extract (month from ORDER_DATE),4,ORDER_COUNT,0)) APR,
SUM(DECODE(extract (month from ORDER_DATE),5,ORDER_COUNT,0)) MAY,
SUM(DECODE(extract (month from ORDER_DATE),6,ORDER_COUNT,0)) JUN,
SUM(DECODE(extract (month from ORDER_DATE),7,ORDER_COUNT,0)) JUL,
SUM(DECODE(extract (month from ORDER_DATE),8,ORDER_COUNT,0)) AUG,
SUM(DECODE(extract (month from ORDER_DATE),9,ORDER_COUNT,0)) SEP,
SUM(DECODE(extract (month from ORDER_DATE),10,ORDER_COUNT,0)) OCT,
SUM(DECODE(extract (month from ORDER_DATE),11,ORDER_COUNT,0)) NOV,
SUM(DECODE(extract (month from ORDER_DATE),12,ORDER_COUNT,0)) DEC
from SAMPLE1
where trunc(order_date, 'YY') = trunc(sysdate, 'YY')
group by order_code
order by order_code;
ORDER_CODE JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC
1 0 0 0 0 0 0 0 0 600 600 0 0
2 0 0 0 0 0 0 0 0 2315 2315 0 0
3 0 0 0 0 0 0 0 0 176 176 0 0
4 0 0 0 0 0 0 0 0 12822 12822 0 0
5 0 0 0 0 0 0 0 0 25682 25682 0 0Now a bit of explanation.
1) Whenever you pivot rows to columns, no matter what version of Oracle and no matter what method you use, you have to decide in advance how many columns you are going to have and what the names of the columns are. This is a requirement of the SQL standard.
2) I use the WHERE clause to get just the data for this year
3) With EXTRACT, I get just the month without the year.
4) Using DECODE, I put every month's data into the correct column
5) Once I do all that, I can just GROUP BY order_code while SUMming all the data for each month. -
How to get system status and user status ?
how to get system status and user status for the given production order?
In which PP table we can
find these?
Thanks&Regards
SatishHi Ram,
Use the FM "STATUS_READ" to read both the system and user statuses for an Order.
Alternatively, the following tables store the user and system status info:
JSTO- Status object information
JEST- Individual Object Status
Hope this helps.
Let me know if u need further information.
Regards,
Sonal -
How to correlate lips table and ekpo table?
Hi,gurus:
How to correlate lips table and ekpo table? We want to find the purchase order no. in the delivery table.
Thanks in advance.Hi xinjiang
You can try using VBFA table. give input as VBELN = deliver no.,POSNN = item no.and VBTYP_N = 'J' and VBTYP_V = 'V'. Then VBELV,POSNV will give you the purchase order no. or else you can get all the preceding documents of delivery like sales order and then input sales order and get purchase order from VBFA -
How to get nested table meta data
how to get nested table column name, column type and column size
by using java. i need code for this.
please help me.The Follopwing program does display the the details of table. Hope you get the solution
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.ResultSet;
import java.sql.ResultSetMetaData;
import java.sql.Statement;
public class Main {
public static void main(String[] args) throws Exception {
Connection conn = getOracleConnection();
System.out.println("Got Connection.");
Statement st = conn.createStatement();
st = conn.createStatement();
ResultSet rs = st.executeQuery("SELECT * FROM SCHEDULE_SET");
ResultSetMetaData rsMetaData = rs.getMetaData();
int numberOfColumns = rsMetaData.getColumnCount();
System.out.println("resultSet MetaData column Count=" + numberOfColumns);
for (int i = 1; i <= numberOfColumns; i++) {
System.out.println("column MetaData ");
System.out.println("column number " + i);
// indicates the designated column's normal maximum width in
// characters
System.out.println(rsMetaData.getColumnDisplaySize(i));
// gets the designated column's suggested title
// for use in printouts and displays.
System.out.println(rsMetaData.getColumnLabel(i));
// get the designated column's name.
System.out.println(rsMetaData.getColumnName(i));
// get the designated column's SQL type.
System.out.println(rsMetaData.getColumnType(i));
// get the designated column's SQL type name.
System.out.println(rsMetaData.getColumnTypeName(i));
// get the designated column's class name.
System.out.println(rsMetaData.getColumnClassName(i));
// get the designated column's table name.
System.out.println(rsMetaData.getTableName(i));
// get the designated column's number of decimal digits.
System.out.println(rsMetaData.getPrecision(i));
// gets the designated column's number of
// digits to right of the decimal point.
System.out.println(rsMetaData.getScale(i));
// indicates whether the designated column is
// automatically numbered, thus read-only.
System.out.println(rsMetaData.isAutoIncrement(i));
// indicates whether the designated column is a cash value.
System.out.println(rsMetaData.isCurrency(i));
// indicates whether a write on the designated
// column will succeed.
System.out.println(rsMetaData.isWritable(i));
// indicates whether a write on the designated
// column will definitely succeed.
System.out.println(rsMetaData.isDefinitelyWritable(i));
// indicates the nullability of values
// in the designated column.
System.out.println(rsMetaData.isNullable(i));
// Indicates whether the designated column
// is definitely not writable.
System.out.println(rsMetaData.isReadOnly(i));
// Indicates whether a column's case matters
// in the designated column.
System.out.println(rsMetaData.isCaseSensitive(i));
// Indicates whether a column's case matters
// in the designated column.
System.out.println(rsMetaData.isSearchable(i));
// indicates whether values in the designated
// column are signed numbers.
System.out.println(rsMetaData.isSigned(i));
// Gets the designated column's table's catalog name.
System.out.println(rsMetaData.getCatalogName(i));
// Gets the designated column's table's schema name.
System.out.println(rsMetaData.getSchemaName(i));
st.close();
conn.close();
public static Connection getOracleConnection() throws Exception {
String driver = "oracle.jdbc.driver.OracleDriver";
String url = "jdbc:oracle:thin:@son15644:1521:CXPqa1";
String username = "ess4qa2";
String password = "ess4qa2pw";
Class.forName(driver); // load Oracle driver
Connection conn = DriverManager.getConnection(url, username, password);
return conn;
} -
How to get internal table from SAP Data Provider C#
Hello.
ABAP:
DATA: lt_t001 TYPE TABLE OF t001.
DATA: url(1000) TYPE c.
SELECT * INTO TABLE lt_t001 FROM t001.
CALL FUNCTION 'DP_CREATE_URL'
EXPORTING
type = 'APPLICATION'
subtype = 'X-R3TABLE'
TABLES
data = lt_t001
CHANGING
url = url
EXCEPTIONS
OTHERS = 4.
C#:
using SAPDataProvider;
using SAPTableFactoryCtrl;
public void SetDataFromUrl(string url)
SAPDataProviderClass p = new SAPDataProviderClass();
p.SetDataFromURL("APPLICATION", "X-R3TABLE", url);
ISapDPR3Table tbl = p.GetDataAsR3Table("APPLICATION", "X-R3TABLE");
SAPTableFactoryClass tf = new SAPTableFactoryClass();
Table tb = (Table)tf.NewTable();
tb.ISAPrfcITab = tbl.DataTable; // Exception !!!!!!
How to get internal table from SAP Data Provider ?Hi Sergey,
I'm trying to do the same, have you found a solution to solved it?
thanks for your help.
Regards.
Jonathan -
How to get current month and last month dynamically??
how to get current month and last month dynamically
like
month = getCurrentMonth();
lastmonth = getcurrentMonth() -1;
please help
thankshi :-)
/* depracated but can be still useful */
java.util.Date dtCurrent = new java.util.Date();
int month = dtCurrent.getMonth();
int lastmonth = dtCurrent.getMonth() - 1;
System.out.println("* " + month);
System.out.println("* " + lastmonth);
/* better to use this one */
Calendar cal = new GregorianCalendar();
int imonth = cal.get(Calendar.MONTH);
int ilastmonth = cal.get(Calendar.MONTH) - 1;
System.out.println("*** " + imonth);
System.out.println("*** " + ilastmonth);
regards, -
How to get automatic plant and shipping point and storage location
hi,
sap gurus,
how to get automatic plant and shipping point and storage location automatically into the sales order
i have done all the config settings for that
but its not appearing automatically.
regards,
balaji.tHi
Balaji...
U can get the plant in sales order, by doing the default the same in customer master or in material master. In customer master -- sales are data--shipping tab delivering plant there u can assign and get the same in order for that customer. it is better to do in customer master rather than in material master.
Shipping point is getting determine in sales order and u can not make it default like plant. Shipping point is determine in the basis of Shipping condition of customer ( ship to party)+ loading group of material + Deliverying plant there u have to assing the shipping point and it will flow in the sales order. Tcode OVL2
For S loc u have to enter manually in the sales order u can not get it automatically.
Hope this will help you.
Thx. -
How to get count,index and compare to arraylists
hi
how to get count,index and comparing of 2 arraylist.... plz suggest me asap...How is your question related to JDBC? And what have you done so far with your code?
-
How to get customer number and name from the SD document
Hi All,
Can you please let me know how to get Customer Number and Name from the SD Document?
Thanks a lot....
AnilHi,
It will be displayed in the SD (BIlling document) itself, you clikc on the VF03. The customer name and number will also appear in the SO document also Tcode VA03
regards,
radhika
Edited by: kolipara radhika on Jul 10, 2009 5:32 AM -
How to get the table with no. of records after filter in webdynpro
Dear Gurus,
How to get the table with no. of records after filter in webdynpro?
Thanks in advance.
SankarHello Sankar,
Please explain your requirement clearly so that we can help you easily.
To get the table records from your context node use method get_static_attributes_table()
data lo_nd_mynode type ref to if_wd_context_node.
data lt_atrributes_table type wd_this->elements_mynode.
lo_nd_mynode = wd_context->get_child_node( name = wd_this->wdctx_mynode ).
lo_nd_mynode->get_static_attributes_table( importing table = lt_atrributes_table ).
Note: You should have already defined your context node as a Dictionary Structure.
BR,
RAM -
How to query a table and result together with autonumber
Hi all
How to query a table and the result return autonumber for each row together with the table values.
I have tried rowid but it provide me with characters.
TjWhat is your exact requirement?
If you want the number of rows selected, you can use rownum.
select rownum, a.* from <table> a;
Cheers
Deepak -
How to get total numbers and total price in query reports
Hi,
how to get total numbers and total price in query reports.for example:
particular item is issued 3 times a week...I need total quantity of item issued
my query...
SELECT T0.[DocNum], T1.[ItemCode], T1.[Quantity], T1.[Price] FROM OIGE T0 INNER JOIN IGE1 T1 ON T0.DocEntry = T1.DocEntry WHERE T1.[ItemCode] Like '%%[%1]%%' and T1.[U_WOType]='[%0]'Hi,
Try this:
SELECT T1.[ItemCode], SUM (T1.[Quantity]) as [Total Quantity], SUM (T1.[Quantity] * T1.[Price]) as [Total Price] FROM OIGE T0 INNER JOIN IGE1 T1 ON T0.DocEntry = T1.DocEntry WHERE T1.[ItemCode] Like '%%[%1]%%' and T1.[U_WOType]='[%0]'
Group By T1.[ItemCode]
Beni.
Maybe you are looking for
-
I must have hit something on my keys to trigger this, like a shortcut or whatnot. Every time I create a new track, my icons for the track are HUGE, the biggest they can be. And when I change the size of all my tracks they don't change, the stay nice
-
That problems I can find with this? The environment's variable are the same ones? They can be re-write?
-
HT204003 How do you find the passbook enabled apps once you use passbook???
How do you find the list of passbook enabled apps once you start using passbook???
-
I notice that there are three different powered chargers that i can buy, 45W, 60W and 85W. Is it necessary to use a certain powered one depending on what mac Mac I am going to be powering? Or can I use an 85 watt one with any Mac? If so, why would th
-
Compiling Servlets: javax.servlet package unknown
Hello everybody, I'm new to J2EE technology and would like to start with creating servlets, but the javac compiler can not compile my java class succesfully, cos' it seems, it does not know the javax.servlet package. In each documentation is just a s