Project spartan does work and give amassege

project spartan does work and give amassege no internet but the other brawsets work

Hi,
Did your Internet Explorer work fine? Have you use proxy?
Please run Apps troubleshooter to see if it could be resolved.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

HT201210 I have a iPhone 3 g, I'm doing update and give me error 1015 Please help and thank you

I have a iPhone 3 g, I'm doing update and give me error 1015 Please help and thank you

You can not get help here per the terms of service. Discussing jailbroken devices is forbidden.
The ONLY thing we can advise you to do is try putting the phone in DFU mode (google for instructions) and restore it.
Beyond that, you're on your own.

Project Versions: Plan Work and Actual Work

Hi,
Can you pls suggest me,
where can i get Project actual work and planned work from R/3.
which R/3 table will provide this information for different Project Versions.
Thes values are required against each Project version.
Your valuable inputs will be rewarded.
Thanks,
Lakshmi.

Hi,
We have the following scenario: The system does not default the Actual Duration when the Start Date, Time and Finish Date, Time are entered on the time confirmation, it should calculate the time and insert the value in the Actual Duration field.
Is it possilbe.
Regards
JF
Please open a thread for your specific query.
-Paul
Moderator
Edited by: Paul Meehan on Sep 9, 2011 10:59 AM

Start Menu, Notification center, project spartan not working - Windows 10 TP 10049

I updated to windows 10 technical preview (Build 9926) from windows 8.1 OEM. The start menu and notification center were not working. I tried PowerShell method but that didn't help. Then I updated to Build 10049 hoping things would get better, but start
menu and notification center still didn't work. Project Spartan opened and closed. I setup an additional user account to try if it had same issue but I was not able to switch accounts. I am using Lenovo Y50-70

Hi patanai,
Regarding DISM command, you may take use of Windows 10 build 10041 ISO:
you should mount the ISO as a drive first, or take use the install Media (USB or the DVD drive), right click the ISO and choose to
mount, after that, you could access the ISO through Window Explorer.
Then open CMD with admin rights, type the following command:
DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:X:\Sources\Install.wim:1 /LimitAccess
Where the X: drive is the mounted drive letter.
Before that, please try to create a new User account and check if the issue insists.
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I've been trying to link my apple id to my macbook. every time i try this it doesn't work and gives me a little yellow triangle with an exclamation mark in. any help on the matter would be great.

so everytime i try and link my apple id to my macbook (mid 07) it doesnt work and i get the yellow triangle. i recently reset my mac as i forgot my password. in the process i made another user to reset my password. doing this i went through the complete start up of a macbook (from when you buy from new). i dont know if this has anything to do with this problem. but i have now deleted that user.
any help is much appriciated.

For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa

Random videos on youtube just don't work and give off an error message. I've reinstalled and reset firefox and still nothing.

Lately some random videos that I try to watch just don't even try to load and instantly give off the "There was an error during playback" message I open it in IE and it works fine no problem. I've been trying to fix it on my own from reinstalling firefox or resetting it to trying a new profile. I wasn't getting this problem until I had to reinstall firefox to get myth-weavers.com to work. Ever since I freshly reinstalled firefox some videos have not work.
-Not blocked by isp
-Videos are often from the same uploader.
-seems like every 4 or 5 videos is down.
-I went to try and update my plugins in stuff and this was found http://imgur.com/bGWnrSf
-not sure what to do about above.
-my java is up to date.

Hi Fayko, a couple of other users are reporting this problem, too.
Did you notice any difference in Safe Mode? To spell that out a bit more: Firefox's Safe Mode is a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using either:
* "3-bar" menu button > "?" button > Restart with Add-ons Disabled
* Help menu > Restart with Add-ons Disabled
Not all add-ons are disabled: Flash and other plugins still run
After Firefox shuts down, a small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
Any difference?
Regarding your Java plugins, the "Deployment" one might not be updateable but the regular Java SE is. You can use the link on the plugin check page or [http://www.java.com/en/download/testjava.jsp]. But Youtube doesn't use the Java plugin, so that would just be for sites that do.

I am having a recurring problem with my screen suddenly enlarging to the point where I cannot use it! The power button is also unresponsive. When it does work and the screen is large, I cannot access the slide at the top.....

I am having a recurring proble with my screen suddenly enalrging to the point where it is unusable. The power button is also not working. When I try to shut off the phone to restart it, I cannot swipe across the top to power off vbecause the screen is so big and unresponsive. Can someone help me with this problem?

Double tap the screen with three fingers to switch off zoom, then go to setting and disable it to make sure you don't switch it on again by accident.
http://support.apple.com/manuals/

IPhoto is removing my albums from mobile me and refiling photos individually. it is destroying all my work and gives me no option to stop this. Help please!

How do I stop IPHoto from systematically removing all my albums from Mobile Me and placing the photos back into its files. With each album it says it is doing this, providing an OK box but no CANCEL, and the program freezes.How can I cancel this??

You can control this from Mail Preferences on your computer. Open Mail, go to Preferences, and select Accounts.
Go to your MobileMe account and select Mailbox Behaviors. Next to Trash, select Store Deleted Messages on the Server.

Adobe Reader v7.09 doesn't work and gives me "expr: syntax error".

Hello!
$ /home/Programs/AdobeReader709/bin/acroread
expr: syntax error
expr: syntax error
... (never ends and I have to kill the process).
I ran a strace for a couple seconds and ctrl-c'ed to stop/kill it. I posted the log: http://pastebin.ca/674360 ...
I see errors so I searched for those files:
$ locate ld.so.
/etc/ld.so.cache
/etc/ld.so.conf
/etc/ld.so.conf.d
/etc/ld.so.conf.d/i486-linux-gnu.conf
/etc/ld.so.conf.d/libc.conf
/usr/share/man/man8/ld.so.8.gz
Any ideas what's going on? It used to work. I even reinstalled it. I am using Debian (Etch) with Kernel 2.6.22-K7.
Thank you in advance. :)

Nevermind. I found the answer in http://www.adobeforums.com/cgi-bin/webx/.3bc4b92f ... :)

Security questions does work and wont reset

security questions dont work on verifcation request on my iphone. can only download free apps. can not reset on my apple id eather. anyone got an answer?

make a new apple id

Mail 2.1.1 recieves but doesn't send mail and gives no error message?

I've an issue with mail on an I-Mac with 2 gig intel core duo running O/S 10.4.9 and mail app version 2.1.1. I was using the machine at my studio for a studio manager. I downsized the studio and gave that machine to my parents who have been using an old G4 I gave them running o/s X and using the mail app for all their e-mailing. I migrated their old system from the G4 to the I-mac via target mode and everything seemed to be working until they tried to type more than one word in the body of the e-mail. once you hit the space bar and try to type another word it just gives an error tone. Also they are not able to send mail but are able to recieve. There is absolutely no error message or tone when you hit send or hit the return key. It just does nothing and gives me no feedback. I have gone through all the settings from the old machine which is sending and recieving mail as it has for the last 3 years with out incidence. I've updated the software, verified and repaired the disk and permissions. They are using RCN as their ISP with a cable modem. Again the G4 is working as it should with the exact same settings that the I-mac is configured with. Is there some issue with the older intel machines? Any help would be greatly appreciated. thanks,
-Russ

This problem in Mail is usually caused by some Launch Services cache or preferences corruption that affects the built-in spell checker. The following article describes how to manually reset Launch Services — the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
Resetting Launch Services
If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, take a look at this other article for general troubleshooting and cache-cleaning procedures. Actually, you should also verify/repair the startup disk (not just permissions), as described there:
Resolving Disk, Permission, and Cache Corruption
The most appropriate utility for this particular problem probably is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
Side effects of System cache cleaning
As an example, this is how you should proceed with OnyX:
1. Quit all applications.
2. Launch OnyX and enter your administrator password.
3. Go to Maintenance > Reset and check LaunchServices database.
4. Un-check any other pre-checked options.
5. Click the Execute button.
6. Restart the computer.

Itunes 11.1.5 will not sync new apps with iPhone 5 iOS 7.0.6 and gives grayed out "install" no message? How does one work around this?

Itunes 11.1.5 (MacBook Pro,OS 10.6.8) will not sync new apps with iPhone 5 iOS 7.0.6 and gives grayed out "install" no message? How does one work around this?

Just reboot your laptop... While its rebooting try to reboot your phone also by holding the home and power buttonn for 10-15 seconds...When your phone is turned off try to connect it to iTunes and it will recognize your phone in recovery mode.
If you have the .ipsw file for iOS 7.0.6 saved in your desktop then in itunes press shift and click on Restore.
Select the ipsw file and let it restore.
If you dont have it downloaded then simply click on restore.
I hope it works
Cheers !

TS1702 When I try to update an App I am getting my old email address (which no longer works) and when I put in its password it says password or username is wrong. but it does not give me an option to put in my new user name. How can I correct this.

When I try to update an App I am getting my old email address (which no longer works) and when I put in its password it says password or username is wrong. but it does not give me an option to put in my new user name. How can I correct this.

What you are getting is the AppleID (AppleID can be an email adress) used at the time of the purchase of this app. It is an identifiant allowing Apple to link your purchase to your account.
If you want to manage associated email, you can go at https://appleid.apple.com but the AppleID could never be modified.
I do not know if in your case, it is just that you no longer use your old email address or that you actually a 2 AppleID. In any case, you will have to remember the password related to the account used for your purchase. If you don't, just use the link above to try to retreive your password.

Its working just fine but does it look good? Take a look and give me your advice!

I got to say that this is my first finnished labview program, and it's working fine, almost no problems. But i'm not that shure about
this huge while loop with all its instructions. Normaly a while loop takes 1 ms to iterate once, but this loop takes more than one ms,
I'm using another subVI to catch data up to 5 ms. / sample as output from measurement device to the while loop in this Sub vi, and then from this sub VI i'm initializing the data value read from the Measurement device, to a global variable that i read in this huge while loop. I belive that the subVI while loop iterates several times before the huge loop iterates once. Meaby thats why my graphs for the data are plotting more than one data at a time.
Take a look and give your advice, it seems that all the measurements are well. And I don't really got problems with the program when running, exept from small delays when I switch the sample rates.
Regards
Zamzam
HFZ
Attachments:
WhileLoop.JPG ‏354 KB

I agree with Titou.
Wow! That's an eye-full.
There are some functions like setting audio On / Off that may not need to be in there. Or do they? You'd have to describe what the loop is supposed to do. Same comment for the indicator display settings on property nodes. Do you intend to turn them on/off a number of times during an iteration of the loop?
You should "divide & conquer". By that I mean, use sub-vi's that are function specific. As mentionned by Titou, you should have a look at the development guidelines. Basically, now that you have a working loop, you can improve it by creating some sub-vi's, revisit some items that may not need to be in the loop. As a matter of fact, you could create some control & indicators and maybe transform the loop into a sub-vi as well.
There are many Case Statements that you could convert to sub-vi's and that way, you could eliminate the global variables by using indicators and wiring directly to them.
However, I would have to say that the value for "Write Flow Data" might become unpredictable due to race conditions. Revisit how the value(s) are set for that one.
But it does look like you had some fun doing this one. Which is the most important thing. To have fun implementing solutions with LV.
Happy wiring!
JLV

My iPhone was stolen and I have contacted the police who are using the meid number to locate. How does this work and what are my chances of getting the phone back?

My iPhone was stolen. I used Find My iPhone app to lock it and display a message. The phone has not connected to the internet to locate it. I contacted the police and they have taken my meid number. How does this work and what are my chances of getting the phone back? Are there other ways the theif can use it. I was told once they put in a new sim card and use it, whatever software the police have, it will show up.

Honestly? In the US (I can't speak to other countries, though I doubt it works much differently in a lot of the world) The police took your report and filed it either in their computers or, on paper. They will now not think of this again. The only time it will cross anyones mind is if, in the course of entering information into evidence about items recovered or seized at a crime scene, the serial number of an iPhone that was found/seized happens to match yours, in which case you will be contacted.
The police in the US can and will do nothing to 'blok' the phone and it's not worth their time to try and locate it unless you know for a fact that it was stolen by a big time drug lord, master criminal, or some other such prime target and they can get a court order to track the location of the phone in order to locate this individual for your own purposes. If they do that, they'll probably keep him under surveilance for a year or so before they act.
Basically, the police don't care about your phone. If they find it, they will give it back to you. They are not, however, going to go looking for it. They have better things to do.
I'm sorry, but that's the way it is.

Project spartan does work and give amassege

Similar Messages

Maybe you are looking for