Project spartan error - This app can't install

I get an error that says This app can't install. Check the store for more info about Project Spartan.
I'm running Windows 10 Pro Technical Preview Build 10049.

Hi,
Meanwhile, you can also test the Project spartan using another user acocunt or create a new user account.
Project spartan should be installed automatically after you upgraded to preview build 10049, if this issue only happened recently, then I would suggest you return the system to a previous state with restore point and check if it
can bring back the app.
Regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

  • Error 0xe8000050 while syncing app in my iphone and some app can not install

    I have an iphone 3g with ios 3.1.3 but while i'm installing some app it, i get this error 0xe8000050 while syncing app in my iphone and some app can not install. what's the problem?

    http://support.apple.com/kb/TS3221
    The last release of iOS to support the 3G was 4.2.1, which was released on November 22, 2010.
    iOS 4.3, released on March 11, 2011, did not support the iPhone 3G.

  • Trying to install final cut express keep getting error message "FCE" can't install on this disk.  A newer version of this software already exists on this disk.  Have remove all FCE elements with no success.

    Keep getting error message "FCE" can't install on this disk.  A newer version of this software already exists on this disk.  Have remove all FCE elements with no success.

    http://www.digitalrebellion.com/fcsremover/

  • I can't finish the installation of Itunes for windows. at the end of the installation I get an error. How can I install this programm?

    I can't finish the installation of Itunes for windows. at the end of the installation I get an error. How can I install this programm?

    See if the user tip: https://discussions.apple.com/docs/DOC-6562 helps out with your problems.

  • Can't install safari extensions, I get the error message "Safari can't install this extension, An error occurred while installing the extension "Pin It Button"." Any suggestions?

    Every time I try and install an extension for Safari I get the error message "Safari can’t install this extension, An error occurred while installing the extension “Pin It Button”." I have all the latest updates, working on OS X Yosemite v 10.10.2 / Safari v 8.0.3. Any suggestions?

    Back up all data before proceeding.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Use the search box in the toolbar of the Keychain Access window to search for an item named "Safari Extensions List". If found, delete it. Quit Keychain Access.
    Quit and relaunch Safari.

  • Cannot install mountain lion. error "This copy of the Install OS X Mountain Lion application is damaged, and can't be used to install OS X."

    cannot install mountain lion. error "This copy of the Install OS X Mountain Lion application is damaged, and can't be used to install OS X."

    You do meet the hardware requirements. Otherwise you wouldn't have been able to purchase ML.
    If you're connected wirelessly to your router, connect with Ethernet.
    If you're connecting through a proxy, connect directly.
    Boot in safe mode (shift key down at startup) and try again.

  • Error code 2 - can't install updates on our cloud. Any ideas what this might be?

    I"ve never had a problem installing updates before, but I'm getting the Error code 2 - can't install updates on our cloud message now. . .
    Ideas?

    Code 2 https://forums.adobe.com/thread/1595922

  • Setup.exe "This app can't run on your PC"

    Hello, I've been trying to install Windows 8 on my macbook pro (mid 2012) using boot camp. I was using a windows 8 .iso file with a flash drive. I got Windows 8 installed and running, but when I tried to install the boot camp drivers off of the flash drive (setup.exe) I keep getting a fullscreen error message saying "This app can't run on your PC. To find a version for your PC, check with the software publisher." I've tried redownloading the windows support drivers to the flash drive but it didn't work. I'm having trouble finding any instance of this on all of the forums I checked and it is geting very frustrating. If anyone can help with this it would be much appreciated.

    I think I found the problem, I discovered that I had installed a 32 bit windows 8 instead of the 64 bit one. Based on some other threads I've seen I'm guessing this is the problem and will post again when I'm finished reinstalling the 64 bit version in case anyone is curious.

  • ITunes error: This program can't start because iAdCore.dll is missing from your computer. Try reinstalling the program to fix this problem.

    iTunes error: This program can't start because iAdCore.dll is missing from your computer. Try reinstalling the program to fix this problem.
    Windows 7 Professional. AMD 64 bit processor. New install of itunes.
    Unable to uninstall. Unable to reinstall. Sigh.

    THANK YOU!   turingest2
    See Troubleshooting issues with iTunes for Windows updates.
    This Fix WORKED!!!!!  And had aready tried MANY others first... 
    https://discussions.apple.com/docs/DOC-6562#iadcore   <--  This is a direct link to solution...

  • SetDpmServer.exe (4.1.3465.0) on Windows Server 2012R2 (Azure VM) This app can't run on your PC: Access denied

    Hi,
    I've installed on a Windows Server 2012 R2 (Azure VM) the DPM agent 4.1.3465.0. This VM is not a domain member of my DPM 2012 SP1. So I ran the command
    SetDpmServer.exe -dpmServerName dpm.domain.com -isNonDomainServer -userName dpm -productionServerDnsSuffix
    domain.com
    Although I'm running the command prompt as Administrator I receive:
    This app can't run on your PC
    And in the command prompt I see: Access denied
    How can I tackle this?
    Thanks,
    John
    John

    Hi John,
    Here are 2 things I would like to confirm.
    1. Please confirm if Protection Agents is installed on target computer before running the command line. 
    In following article it provides the command line which you are using now. However it mentioned to install Protection Agents manually on target server first:
    Installing Protection Agents on Computers in a Workgroup or Untrusted Domain
    http://technet.microsoft.com/en-us/library/ff399479.aspx
    And please noticed the 2 community additions:
    1.  make double-click on DPMAgentInstaller_x64.exe without specify DPM server name
    2. follow the examples in this article:
    http://technet.microsoft.com/en-us/library/ff634193.aspx
    1). Enable NETBIOS over TCP/IP on BOTH DPM Server and proposed managed machine's WINS tab of NIC card properties sheet Local area connection status -----> Properties -----> Internet Protocol Version 4 -------> Properties ----> Advanced ----->
    WINS tab. Also assumes disable Windows Firewall OR create needed port openings.
    2). When using SetDpmServer.exe command also CRITICAL to use ONLY NETBIOS name of DPM Server and do NOT include [-productionServerDnsSuffix <DnsSuffix>] end command at username.
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • How many Apps can I install on my iPhone at the same time?

    I've installed over 100 apps (108 exactly) & do not know how many Apps can be installed on iPhone? does it have a limit of amount of Apps can be installed on iPhone?

    Up to 9 pages
    Message was edited by: Dynamite DJs
    Message was edited by: Dynamite DJs

  • When I try to install Windows on iMac with Bootcamp I get this message,"Can't install the software because it is not currently available from the Software Update server."

    I try to get Windows 7 on my iMac 21.5-inch but on the Bootcamp Assistant I get this message,"Can't install the software because it is not currently available from the Software Update server." Please help me and thank you.

    I have that problem too.  There's many other discussion threads as well.  Either Apple doesn't realize they have a problem, or they do and simply don't care.  Either way, not good.
    There is a workaround that I'm going to try next.  Go to this webpage:
    http://support.apple.com/kb/HT5634
    Scroll down to the middle of the webpage.  Hit "Expand All".  Now, search the webpage for the Apple product name of your computer.  It should be something like "MacBook Pro, 17-inch, Early 2008".  If you're unsure what you have, open "About This Mac" (upper left corner of your screen, Apple menu), and hit "More Info".
    Now that you've found your computer, read across the table, to the version of Windows that you want to install (32-bit or 64-bit).  Hopefully you'll find a "4" or "5" there.  Click on that number, to go to the download page for the drivers that you need.  If you just see an empty box there, then you're out of luck....
    Hopefully there will be drivers.  Download those, unzip, and then copy to a USB stick that has been formatted for MS-DOS FAT (or FAT32).  Use Disk Utility to format your USB stick if necessary.  Now, you have the drivers you should have gotten from the Boot Camp Assistant download.  You should then be able to go back to Boot Camp Assistant and follow the instructions from there.
    Hope it works!
    Josh

  • Create a SharePoint 2013 Appplication in C#,Error:This operation can be performed only on a computer that is joined to a server farm

    I want to create a sharepoint application in C#:
    SPFarm CurrentFarm = SPFarm.Local;
    SPWebApplicationBuilder webAppBlder = new SPWebApplicationBuilder(CurrentFarm);
    webAppBlder.UseNTLMExclusively = true;
    webAppBlder.AllowAnonymousAccess = false;
    webAppBlder.UseSecureSocketsLayer = false;
    SPWebApplication webApp = webAppBlder.Create();
    webApp.Provision();
    It's create a new application succeed,but when I view the site there is an error:
    This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server to read from the configuration database. To connect this server to the server farm, use the SharePoint Products Configuration
    Wizard, located on the Start menu in Microsoft SharePoint 2010 Products.
    How can I fix this issue?
    ps:I had create some new application in sharepoint web site.It's all fine without any issue.
    The sharepoint server,sqlserver and the programs in the same machine.
    Besr regards

    Hi,
    I think below line is causing the error -
    SPWebApplicationBuilder webAppBlder = new SPWebApplicationBuilder(CurrentFarm);
    can you put that line within a try catch and see that causes an exception. If so,  you might try as below-
    SPSecurity.RunWithElevatedPrivileges(delegate()
    webAppBuilder = new SPWebApplicationBuilder(CurrentFarm);
    Hope this helps!
    Ram - SharePoint Architect
    Blog - SharePointDeveloper.in
    Please vote or mark your question answered, if my reply helps you

  • Can't run NMCAP on Server 2012 R2 - "This app can't run on your PC"

    Hi all,
    For some reason it would appear Microsoft have blocked NMCAP running on Windows 2012 R2 and 8.1 in the last week or so.
    When running NMCAP at the command line I get "This app can't run on your PC"
    Does anyone know how to get around this?
    Thanks,
    Daniel

    Hi Paul,
    It seems to work on my Windows 8.1 machines as well, but nmcap won't won't run on any of our Server 2012 R2 machines now, it just gets blocked by SmartScreen.  I can run Network Monitor ok.
    It means I can't do things like this: nmcap.exe /network * /capture /file C:\nmcap\%computername%.chn:150M /TerminateWhen /KeyPress x
    Very odd!

  • Why the App can automatically installed without my permission?

    Why the Funshion Online Technologies App can automatically installed on my iPhone which without my permission?

    What good does that link do? That web link tells you how to go back to version 3.6. I just want to go from version 9 back to 8.

Maybe you are looking for