Project Special stock indicator PROJ-KZBWS

Hi,
I created a project with TCODE CJ20N.
The project's valuation indicator(KZBWS) is assuming "M" and this field was not visible at moment of creation,
Is there any config to define "A" ?
Regards,
Menoita

Hello Riten,
You can control this in your Item Cat (use VOV7) in Special Stock in Business Data section.
Hope it can assist you.
Thanks & Regards
JP

Similar Messages

Special Stock Indicator (SOBZK) and Inventory Extractors

I have activated business Business Content for the Inventory Management (0IC_C03) cube with Grouping as In DataFlow Before and Afterwards. However, the special stock indicator field which is part of the extractor and not hidden does not come across into the Transfer Structure, is there a reason and how can I resolve? Thanks
I have gone to the DataSource/Trans Struc tab, have seen in the Data Source and am able to transfer across
Message was edited by: Niten Shah

Hi
In the Standard Sytem these are the special Stock Indicators
E     Orders on hand
K     Consignment (vendor)
M     Ret.trans.pkg vendor
O     Parts prov. vendor
P     Pipeline material
Q     Project stock
V     Ret. pkg w. customer
W     Consignment (cust.)
Y     Shipping unit (whse)
I have not found B - Special Stock indicator.
You can use Accotunt assignment Category D - with Special Stock Indicator E to get the Material into Stock Under Sales Order Stock..
Item Category S - Third Party is used only in case of Third Party Process & athe Account assignment Category Picked is X - All aux.acct.assgts.
Thanks & Regards
Kishore
Thanks & Regards
Kishore

CO07 and special stock indicator for components

Hello,
My final purpose is to be able to call components from project stock in production orders without header material, created in CO07.
I notice a strange behavior and would be glad to recieve some explanations.
Production orders are assigned to a WBS. If I indicate the WBS in the CO07 selection screen, the special stock indicator for the components is determined as expected:
If view MRP 4 for the component says "Individual requirements" then special stock indicator is set to "Project stock"
If view MRP 4 for the component says "Collective requirements" then special stock indicator is set to "Common stock"
Second scenario is that I don't provide the WBS in the CO07 selection screen, but provide it in the assignment tab later. In this case, the special stock indicator for components will always be empty (common stock) by default, without any possibility to modify this manually.
Is anybody able to explain me why?
Merry Christmas to all.

Hi!
Actually it is not related to SAP Manufacuting Execution solution - so you'd rather re-post the question to ERP-related forum. This can help you find a proper one.
Regards,
Sergiy

Customer Stock (Special stock indicator B and item category C)

Dear All,
I am mapping my service center scenario in sap,
We are consumer product manufacturer when material is wthin warranty or outside warranty, for any defects or replacement customer come with defective material to my service center.
When i will post receipt for the material it should be the CUSTOMER stock,
For that i need detailed information about special stock indicator B and movement type combination.
also item category C in purchasing documents.
plz tell me that i can directly configure these things in sap or B and C both are standard provided by sap.
I am using 4.7 in my system B and C both are not available.

Hi
In the Standard Sytem these are the special Stock Indicators
E     Orders on hand
K     Consignment (vendor)
M     Ret.trans.pkg vendor
O     Parts prov. vendor
P     Pipeline material
Q     Project stock
V     Ret. pkg w. customer
W     Consignment (cust.)
Y     Shipping unit (whse)
I have not found B - Special Stock indicator.
You can use Accotunt assignment Category D - with Special Stock Indicator E to get the Material into Stock Under Sales Order Stock..
Item Category S - Third Party is used only in case of Third Party Process & athe Account assignment Category Picked is X - All aux.acct.assgts.
Thanks & Regards
Kishore
Thanks & Regards
Kishore

Vl01n special stock indicator

DEAR GURUS.
I WANT TO MAKE OUT BOUND DELIVERY . BUT IN VL01N THE SPECIAL STOCK INDICATOR IS
'E' AND I WANT IT BLANK IF IT IS GENERAL MATERIAL AND IT WILL BE 'Q' IF IT WILL BE PROJECT STOCK.
HOW I CHANGE FROM CUSTOMISATION.
I AM WAITING YOUR REPLY.
REGARD,
RITEN PATEL

Hello Riten,
You can control this in your Item Cat (use VOV7) in Special Stock in Business Data section.
Hope it can assist you.
Thanks & Regards
JP

Table EBEW , field SOBKZ - Special Stock Indicator

Hello,
Can somebody tell me the value & text range for this field as there I cant find text anywhere.
What is the purpose of this field?
Thanks

Hi
Its special stock indicator field for ex. E, K , M, O, P.....etc
If u go to MMBE , thr u can see the special stock indicator field to select , this field gives the material availability in which special stock like consignment, for project , for order , for pipe line...etc

BAPI_ALM_ORDER_MAINTAIN not Updating Special stock indicator field

Hi Experts
I am using BAPI_ALM_ORDER_MAINTAIN to create and then update a Customer Service Order. When am trying to update the Special stock indicator field in the Components Tab(of IW32) through BAPI, its not doing so, and no error is thrown as well.
The required qty and the batch field in the components tab get updated which ensures that the logic am using is the correct one.
Please let me know if anyone has faced such a situation before. Any workaround(some other FM) to update this field is also welcome.
Points guaranteed.
Thanks
Kulpreet Singh.

Hi!
BAPI_ALM_ORDER_MAINTAIN is only updating a field, when you set the update flag also in CHANGE method.
So if you are maintainig the IT_COMPONENT table, you have to put an 'X' into the same field in the IT_COMPONENT_UP table also.
And of course don't forget to commit the modification.
Regards
Tamá

Change component level special stock indicator for Purchase Ord-through CIF

Hai,
my requirement is to change the the spoecial stock indicator at the component level for the PO .
The purchase reqqusition is available in APO system.At the time converiosn to PO, the PO will get created in R/3 through CIF.
When the Purchase Order is getting saved in R/3 then I need to check the component level Special stock indicator(SOBKZ) & I need change its value.
I am currently using the user exit 'EXIT_SAPLCPUR_001' to change the same.in this user exit, I am changing the component level SOBKZ in the table IT_INPUT & I am also setting X in IT_INPUTX table.
But the changes are not reflecting in the newly created PO.It always shows the value 'E' for SOBKZ.
can any one tell me is this the right user exit to change the above value? if yes please expalin me in rdetail on how to change this.
Thanks,
Bhaskar.

Hai Saurabh,
I have tried changing the CP_POSITION-SOBKZ field in the user exit EXIT_SAPLMEPI_006.This one changes the SOBKZ of the item of PO i.e, the change reflects in EKPO table.
What I am looking for is to change the Component level SOBKZ of the ITEM of the PO.The change reflects in RESB-sobkz table.
I think, In the User exit EXIT_SAPLCPUR_001, the field IT_INPUT-SP_STK_IND is meant for this.But this is not working.
Please inform me how the RESB-SOBKZ can be changed?
Thanks,
Bhaskar

Special stock indicator for the sales order (VBAP-SOBKZ=)

Dear All,
I am getting a warning message while making an initial entry of stock with Mov.Typ : 561 and Special Stock Indicator (E), i.e., "The special stock indicator for the sales order (VBAP-SOBKZ=)is different from the special stock indicator in the goods movement.
The system is allowing to post the initial entry of goods but when I am trying to do a PGI, it is throwing an error saying that, deficit of stock in the specific storage location.
Can anybody help me out with this problem ?
Reward points shall be awarded.
Rgds,
Indrajit Dey

Hi Indrajit,
Please post the stock with Special Stock Indicator (E), and againest sales order and item.
Go to MB1C transaction enter Movement type,Plant and special stock indicator E.
After that you enter Sales order Number and Item then save the document.
Noe you try to do PGI,
I hope it will help you,
Regards,
Murali.

Special stock indicator for component in process order

Hi,
There is a field in process order where we can maintain special stock indicator for component.
In this filed if we define consignment stock, then the vendor field becomes activated, where the vendor can be given.
Now we want to maintain the data as a master data so that whenever process order is created the sp stock indicator as well as vendor are populated for that particular component.
Q - where to define this master data. I could not see such fields in BOM?
regards,
Mohit

Hi Sunderesan,
Thaks for responding. Even by doing this system does not propose special stock indicator as '3' in process order & even vendor is not proposed.
My requirement is that system should propose '3' in special stock indicator in process order.
Request to look into this.
regards,
Mohit

Work Order - Update special stock indicator in components tab

Hi ,
The requirement is to update the special stock indicator in the components tab of work order based on material number. I tried using the BADI Workorder_update but there was no changing parameter in it and hence it did not work, I also tried using the field symbol option to explicitly change the value but that too failed since it went to short dump prompting that a protected field is being changed.
I am thinking of calling a custom function module at last and updating the value, but for the orders which are being created newly the BADI / user exits contains the temporary number . How could I get the Order number and update the indicator for those orders.
Regards,
Prabaharan.G

I used the EXIT_SAPLCOMK_014 to accomplish this.
Regards,
Prabaharan.G

Authorization Check for Special Stock Indicator in IE02

Dear Gurus,
Would like to check with you if there is an authorization check for change in Special Stock Indicator in IE02-SerData Tab?
For example, the User will only be allowed to change the Special Stock Indicator only to "E" - Sales Order.
Would appreciate your help.
Thanks.

Hi,
This cannot be done by using standard auth object. Standard SAP doesnt support control via this field.
Take help of your ABAP team and create an customized authorization object "Z_OBJECT" with field SOBKZ and which check these field value in table EQBS. Assign this auth object to role and profile you want.
Use the user exit IEQM0003 Additional checks before equipment update. Give a logic to check auth object when while using equipment change tcode.

Special stock indicator 'E'

Is there a report I can run in SAP, for any items that are "E" linked for particular Customers and any reserve stock that we might have in the warehouse, to have the following Parameters.
1. Material Number,
2. Batch number.
3. Storage type
4. Storage Bin
5. Available Qty
6. Goods Receipt Date
7. B.Un
8. Special Stock Number
9. Reserved items.
thanks

Hi
In IM you could run MB52 and ensure you tick Also include special stocks and then enter 'E'
In WM you could run LX02 and put E in the special stock indicator field
I hope that this helps
Frenchy

Special Stock Indicator

Hi. We are trying to come up with a way to not allow picking for material in a WM location that will still allow the netting of the inventory. Because of the complication of an electronic conveyor system, etc, the business does not want to create a new storage location or storage type.
Is there any special stock indicator that will do this? Any other suggestiong ???
Thank you in advance !!
Dianne

I want to be able to net the inventory. I want it included in MRP. And I want to store it in the existing bins and storage types. I just do not want it to be pickable.

Special stock indicator O to add existing custom movement types

Hi Gurus,
Business having the two custom movement types for which they want to add special stock indicator O.
please let me know is it possible to add special stock indicator O to existing movement types.
or
Is it possible to achieve this with creation of new movement types along with current special stock indicators.
Thanks in advance.

have you ever created a new movement type?
try it.
it can only be done by copy of a SAP given movement type, hence it has basically the same functionality as the original movement.
the main purpose for new movement types are to post to other accounts and to segregate authorization.
In other words you cannot add O to an existing movement, you need to create a new movement by copy from a movement that allows this O

Project Special stock indicator PROJ-KZBWS

Similar Messages

Maybe you are looking for