Project started from past

Dear all,
Could you help me on the following question?
Generally speaking, the start date of the project is today.
Now, my project started more than one year ago.
Although I set the start date of the project in 2006, the basic time of the network and activities still starts from today.
How can I make the activities and network start from 2006? How should I configure the scheduling? Please give me some clues.
Thanks a lot.
Judy

In Planning Board under Settings->options, set "Start in the past" greater than 365 and run scheduling. When this entry is blank system rum todays schedule and reset the date to current date.
Venkat

Similar Messages

  • IN SD project starts from which phase?

    IN SD project starts from which phase? End in which phase?

    dear srinivas,
    for any project there are 5 phases which are calling as ASAP methodology
    project preparation is the first phase planning about that project  which is the starting phase
    golive and support ( which call as continious improvement ) is the last phase
    rewards if it helps
    siva

  • Corresponding Sales Organization of a project, starting from table COVP.

    Hello,
    I need to find the corresponding sales organization of a project from the table COVP(this is for an interface). The sales organization is in table proj. But to get there, i need a connection. I thought about this connection:
    COVP-OBJNR = AFVC-OBJNR - from afvc, take aufpl(Routing number of operations in the order)
    AFKO-AUFPL = AFVC-AUFPL - from afko, take pronr(Project definition)
    PROJ--PSPNR = AFKO-PRONR.
    And from proj, take the corresponding sales organization.
    What do you think?I am giving the right connection and all the necessary elements?
    PS: This is only for network elements, for WBS elements I know the connection.
    Thank you,
    Efren
    Edited by: Efren23 on Feb 22, 2012 8:55 AM

    Hello,
    Thanks Gokul.I've found the connections in this link:http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/9659.
    The only connection that was missing was between COVP and AFVC. But i think so and you agree that the right condition is
    COVP-OBJNR = AFVC-OBJNR.
    I will leave the question not answered until tonight, maybe others have other suggestions.
    Thanks,
    Efren
    Edited by: Efren23 on Feb 22, 2012 10:33 AM

  • Help scheduling tasks from both project start date and from later deliverable dates

    I am trying to set up a project scheduling template for a number of similar projects.
    These projects will require initial work to be completed at the project start date, working through the critical path to an end date.
    However.  Certain milestones/deliverables are required on specific dates in teh project (they are recievable by internal customers on firm dates).  I am having trouble scheduling my predecessors for these deliverables to occur as late as possible. 
    I.e.  I want my procurement to start x-weeks (depending on the task) before the deliverable is due.
    Trying to manually set the deliverable date and hoping project will work back and adjust the predecessors to fit isnt quite working... is this possible?
    Im using MSP2010 standard

    nategalambos,
    Actually this is probably a very common scheduling scenario. Schedules often have interim milestones, sometimes with fixed dates.
    Just-in-time scheduling has received a fair amount of press in the past but in my view it has some very real negative downsides. I believe the best plans have contingency built in to allow for unknown problems. For example, let's say you have a task that
    must deliver an item on a particular date and in order to build that item you need to order material. You know the built and test time, it's all done by machine, takes 10 days, and doesn't vary from item to item. The lead time for the material is 6 weeks,
    so you set up the schedule to place the material order 8 weeks before the delivery date. However, there is a problem, the vendor who supplies the material has a problem at his factory and the material is delayed such that it won't be delivered in 6 weeks but
    instead it will take 8 weeks. Because you have not allowed for contingency in your plan, your delivery date is now in jeopardy.
    But to answer your question, one way to set up the predecessor you want is as follows. Using my example above, the Place Order task, let's say the delivery date task is task ID 5 and is a milestone. The place order task could have a predecessor of 5SF-40d,
    or 5FS-40d will also work if the place order task and the delivery date are both milestones.
    Hope this helps.
    You might also want to read Trevor's response to a related post on the following forum: http://answers.microsoft.com/en-us/office/forum/office_2010-project/field-for-start-based-on-as-soon-as-possible/45829d8b-b073-4fbf-8126-0bdac5c7684c
    John

  • How can I stop iMovie from making thumbnails of clips from past projects when opening the program to digitize new clips for new project. i have looked in the preferences and couldn't figure out what to disable.

    How can I stop iMovie from making thumbnails of clips from past projects when first opening the program to digitize new clips for a new project. It takes forever for it and is very annoying. I have looked in the preferences and couldn't figure out what would disable this problem.

    You do not need to move your cursor much when pressing the mouse button to cause the tab to tear-off/tear-away into a new tab. No "sensitivity" setting that I am aware of. The tab in the new window can be dragged back to the original window.
    To disable the feature, install this: https://addons.mozilla.org/en-US/firefox/addon/bug489729-disable-detach-and-t/
    *Read the information on the above page
    *Set options for the add-on: Add-ons > Extensions, click Options next to the specific Extension (the 2 options are defined/explained in the above page).
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

  • Hi,  iTunes is no longer syncing my iPhoto library to my iPhone 4. Everything was syncing fine when I first got the phone, but, over the past week or so, it's stopped syncing photos.   Now, after attempting to start from scratch by deleting all the photos

    Hi,
    iTunes is no longer syncing my iPhoto library to my iPhone 4. Everything was syncing fine when I first got the phone, but, over the past week or so, it's stopped syncing photos.
    Now, after attempting to start from scratch by deleting all the photos on my iPhone, iTunes won't sync ANY photos from iPhoto back to my iPhone. I've restarted my phone, computer, etc., force quit all photo-related apps on my iPhone, and tried various combinations of turning iTunes' photo syncing on/off, switching photo sync folders, etc., all to no avail -- I can't get my iPhoto library back on to my iPhone no matter what I do.
    Anyone encounter a similar situation? (I've already sent feedback to Apple.) Thanks in advance.

    Try deleting what is called the iPod Photo Cache. 
    http://support.apple.com/kb/TS1314

  • My iDVD project won't start from the menu.

    When I create a DVD, it will not start from the menu but goes directly to play.  I can force it to the menu by clicking the "Disc Menu" button on my remote,  This happens on both of my DVD players, one or which is a Bose system.  I didn't have this trouble with DVDs created using my older G5 iMac.  This doesn't happen on all DVDs using the newer iMac.  I've used the "Revolution" theme and it seems to work OK.  For this current project, I used "Full Screen" from the list of older themes.
    I'm using iDVD 7.2.1 on an Intel iMac running OS10.6.8
    Thanks for your help,
    Jim

    Go to the Map mode in iDVD and make sure there are no items in the far left hand Autostart bin.
    If there is just drag it out, save the project as a disk image, File ➙ Save as Disk Image menu option, and test with DVD Player. If it plays OK with DVD Player the encoding was good and you can then burn to disk with Disk Utility at the slowest speed available to assure the best burn quality.  Always use top quality media:  Verbatium, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    Happy Holidays

  • What's happening on project start?

    I've read several threads concerning this or similar problems and I'm still confused.
    Basic observation is that everytime I launch PPro CS5 and start an existing project the last step is loading the file assets of that project in a process that takes an annoyingly long time to complete.  For example a project that has about 300 pure video files (m2v) and 20 audio files (wav) takes about 8 minutes to load these assets - each time I start the project anew.  Judging by the progress note in the lower left of the window, virtually all the time is spent on the m2v video files, not the audio.  I see no evidence of any video file conformation - the Preview File folder and Encoded Files folder are empty and the Media Cache has only audio files (.pek) in it.  What is going on that takes so long and why does it go on each time I reopen a project?
    Particulars of my system:
           i7 930 2.8GHz QuadCore with hyperthreading
           12GB of memory
          Windows 7 64-bit
           NVIDIA Quadro FX 4800 display processor
           4 7200RPM 1TB drives with OS on one, cache folders on another, and project files on a third
    No networked storage, no reloation of files or folders during projects.
    All source files are brought into the projects through the import process.  A problem with large batch imports is discussed in an earlier thread, but otherwise the imports seem normal.  After an import a .pek file is created in the Media Cache folder for each audio file and a 4kB .xmp file is created in the same folder as the source files for each video file.
    I thought that PPro added some xmp tracking data to the video files when it could and put this data in a separate .xmp file when it could not.  I also thought this was a way of tracking the source files so subsequent activity, like reopening the project, would not have to start from scratch each time.  The last mod dates on my source file have not been altered, so I assumed PPro could not get the xmp data into them and instead created the sidecar files. But my .xmp files seem to have no effect on subsequent source file loading.
    Also I have no "project file bloating" per an earlier thread.
    Do I just live with this annoyance or can something be done to reduce project loading times?

    Jim - I did a check and the time to load all the selected clips onto the time line is not much longer than the time to read all the source files off disk.  So I guess its as simple as that.
    The video clips are loaded on the timeline from last to first.  All audio clips are loaded at the end of the process.  Your answer implies that once the tail end video clips are loaded on the timeline and as long as the audio tracks are locked, I can begin further editing on those clips without interfering with the loading of the earlier files / clips.  Is that right?

  • Oracle Projects Differences from 11i to R12

    Hello All,
    Currently we are upgrading from 11.5.10.2 to R 12.1.3
    We have oracle projects implemented in 11i.
    I am researching to get the differences occurred in oracle projects functional and technical from 11i to R12
    It will be a great help to us if we could get some documents or a link which shows the differences.
    Thanks and Regards,
    Ankit Vishwakarma

    Project new features
    Oracle Project Foundation
    New Concurrent Process
    ADM: Purge Obsolete Projects Data
    Oracle Project Costing
    Federal Budgetary Accounting for Project Expenditures via Subledger Accounting
    Contingency Worker Clearing Projects to allow CWK to charge multiple projects
    Additional Project Information in Oracle Time and Labor (Project Name and Task Name)
    Federal Budgetary Accounting for Project Revenue
    Additional journal entries are available in Subledger Accounting for the required Federal Budgetary entries.
    Date Effective Funds Consumption
    Project Type option that requires cost and event transaction dates to fall within the agreement start and end dates.
    Transactions are only billed against the agreement if the entire transaction amount can be funded (no partial recognition) for both revenue and invoicing.
    Without enabling this option, revenue generation supports partial billing for transactions.
    New Parameters for MGT: Invoice Review
    Project Status
    Project Closed After Date
    Project Range
    New Parameters for MGT: Unbilled Receivables Aging
    Project Status
    Project Closed After Date
    Project Range
    Oracle Project Management New Audit Process for Project Performance Reporting Setup
    AUD: Project Performance Reporting Setup
    New Parameters for Refresh Project Performance Data Process
    Actual or All Amounts (Plan and Actual)
    Workplan Version
    Financial Plan Version
    Workplan EnhancementsAbility to Delete Published Workplan Versions (except the latest published version, baseline version, and workplan versions included in a program hierarchy) Usability Enhancements
    Update Work Breakdown Structure page is now obsolete.
    View, maintain, and update a workplan structure from the Update Tasks page.
    Where no latest published workplan version exists, the current working version displays on the Update Tasks page when navigating to the Workplan Tasks.
    Indent or outdent multiple workplan tasks in a single step.
    Confirmation, information, and warning messages appear on HTML pages during Apply Latest Progress as well as the Submit Progress processes. Messages include status information during processing and the availability of the latest progress information.
    New Public API for Creating, Maintaining, and Deleting Programs New set of public API procedures:
    Designate a project as a program and indicate whether projects linked to the program can belong to multiple programs.
    Create links from a program to one or more projects
    Update links from a program to one or more projects
    Delete links from a program to one or more projects
    Budgeting And Forecasting Enhancements Enhanced Automatic Calculation and Derivation Logic
    For plan lines that do not have a specified a quantity, the amount is no longer copied to the quantity field with the rate value set to 1.
    Rate now has a lower precedence than quantity and amount in automatic calculations.  The rate will be re-derived when the quantity, rate and amount are entered at the same time for a plan line.
    When the burden multiplier is overridden by updates to the raw cost or burden cost, subsequent calculations of the burden cost will use the override burden multiplier.  The same is true when the markup percent is updated by changes to plan line components:  the override markup percentage will be used in revenue calculations.
    Enhanced Handling of Override Rates on Budget / Forecast Lines
    Override rates for a planning transaction on Edit Budget and Edit Forecast pages.
    o   Raw Cost Rateo   Budened Cost Rateo   Bill Rate
    Override rates are applied to all existing and new periodic lines for the planning transaction.
    Average rates fields on these pages are now disabled for entry and are used for display only.
    Simplified Addition of Planning Elements and Resources
    New but unbudgeted tasks and resources can be added to a budget or forecast version.
    Add either all new tasks and planning resources or new tasks only to the current plan version.
    Self Service Expenditure Inquiry
    Ability to drill into expenditure details from the Financials tab.
    Reporting Pack for Generation and Distribution of XML Publisher Reports
    A reporting pack is a set of report templates and recipients by project role.
    The Generate Reporting Pack concurrent program emails the reports generated from the report templates based on pre-defined intervals.
    The report template establishes each report’s layout and content.
    New reports templates are configured using XML Publisher tools.
    New or modified reports can be added to an existing reporting pack or be used to create an entirely new report set.
    Predefined data definition files that contain XML tags for performance measures and project data are provided.
    Predefined Reports:
    Project Change Document Report
    Project Committed Cost Report
    Project Cost Detail Report
    Project Cost Labor Report
    Project Cost Summary Report
    Project Earned Value Report
    Project Financial Summary Report
    Project Forecast Summary Report
    Project Revenue At Risk Report
    Budget Integration with Federal Budget Execution and/or 3rd Party Budget
    The budget integration workflow supports integration with the Federal Budget Execution module..
    The workflow can be customized to interface budget lines to external budgeting applications.
    Microsoft Project 2007 Certification
    Integration with Microsoft Project 2007 is supported.
    Project Performance Reporting: Additional MeasuresYTD, QTD and At Completion calculated measures are available on the following pages:
    Performance Overview Period-to-Date
    Summary/Analysis
    Task Summary/Analysis Resource Summary/Analysis
    Project Performance Reporting: Inter-Project Revenue / Billing AmountsInter project revenue / billing amounts are available on the following pages:
    Project List View Workplan Cost
    Exception Reporting Performance Overview
    Task Summary/Analysis Resource Summary/Analysis
    Period-to-Date Summary/Analysis
    Supplier Cost DashboardSubcontractor Payment ControlsSupport for Pay when Paid Scenarios
    A new “Pay when Paid” payment term for subcontracts automatically places holds on all subcontractor invoices under that subcontract until the corresponding customer payment is received.
    Subcontract Payment Controls workbench allows project manager to manage the holds, with visibility into both the customer invoices and the related subcontractor invoices.
    Workflow notifications about the receipt of the customer payment allow the project manager to automatically or manually release the subcontract invoice.
    Associations between the customer invoices and the subcontractor invoices may be automatically maintained based on the billing of project expenditures for cost-plus contracts, or may be manually maintained for fixed price contracts.
    Payment Controls for Subcontract Deliverables
    Support for the tracking and monitoring of subcontract deliverables that place automatic holds on subcontractor invoices in the case of noncompliance.
    Oracle Procurement Contracts allow a subcontract administrator to specify payment impact controls that will take effect when a subcontract deliverable is not met.
    From the Subcontractor Payment Controls workbench, the project manager can view a checklist of the all the current subcontract deliverables, to assist in evaluating the subcontractor status prior to releasing monthly progress payments.
    Oracle Project Resource ManagementResource Search Enhancements
    Resource Search by Email Address
    Resource Search by Person Type
    Streamlined Navigation on Staffing Home
    Cross Validation of Project and Assignment Dates
    Requirement start dates are equal to or greater than the project start date and less than the project end date and that finish dates are equal to or less than the project end date but greater than the project start date.
    Assignments cannot be added beyond the project end date.
    A project team role end date cannot be beyond the project end date. If the roles are created before the project end dates are entered, users will receive an error if they later try to enter an end date that is earlier than the end date for existing roles.
    When project transaction dates are moved corresponding assignment dates are validated against the new project dates. If the new project transaction dates fall outside the dates for existing assignments, users are given an option to shift the assignment dates or cancel the date adjustment.
    Defaulting of Work Patterns’ From and To Dates
    Work pattern from and to dates will default from the requirement start and end dates.
    Improved Exception Handling of Maintain Project Resources Process
    PRC: Maintain Project Resources delivers improved exception handling and notification when it encounters errors while processing employee records.
    New Public APIs for Resource ManagementThe new PJR APIs fall into the following four categories:
    Requirement Public APIs
    Assignment Public APIs
    Candidate Public APIs
    Competence Public APIs
    Organization Authority: Obsolete Forecast Authority
    Removes the forecast authority functionality from the organization authority form
    Removes existing security data relating to forecast authority.
    Replaces the PJR forecast functionality with the new HTML based forecasting functionality. The new forecasting functionality has its own security mechanism and does not honor the old forecast authority model.
    Improves the performance of security calls to organization authority because the existing security data is being removed.
    Oracle Grants AccountingAward Budgeting Enhancements Budget period validations
    Budget periods will not be validated across award budgets when those awards fund a single project.
    Flexibility to establish award budgets based on the actual duration of the award, while not being confined based on the existing budgets already established for the project.
    Automatic summarization of project budgets
    With the new budget period validations, automatically summarize to a project budget viewable in Project Status Inquiry.
    Two profile options have been added to identify the budget entry methods that will be used to summarize the project budgets.
    Budget Line Sorting Option
    Sort budget lines by Resource name, or by effective dates for budgets with date range periods.  Provides the flexibility to view the budget lines by period or by budgeted resource.
    Award Status Inquiry Enhancements View by budget period
    Allows the Find Award Status window to be limited to a single period, range of periods, or inception to date for a particular award.
    Reflects the budget periods entered on the award budget.
    GL and PA Date Parameters on Find Expenditure Items window
    GL and PA date parameters have been added to the Find Expenditure Items window.
    GL Date Parameters on Find Commitments window
    GL Date parameters have been added to the Find Commitments window.
    KKG

  • Pages will no longer let me open files that I have previously downloaded, worked on and then saved on my mac. However it will let me open pages documents that I have started from new. I need the other documents to open and can't figure it out. PLEASE

    Pages will no longer let me open files that I have previously downloaded, worked on and then saved on my mac. However it will let me open pages documents that I have started from new. I need the other documents to open and can't figure it out. PLEASE

    I just got my mac a month ago so go easy on me but I was just working with the pages that was already on it, and then today I know it updated, and now I am unable to open a lot of my documents!:(  Idk what you mean by the icloud version lol sorry! As for the version, when I open pages from my apps and click 'about' it says version 5.1? And when I open the document it just goes grey and kind of blinks and doesnt open? No error message or any indication of why it will not open now when I for sure have opened it in the past! Andddd for the OS X I think it is 10.9.1 ??

  • How to generate 3dSurface plot starting from x,y,z txt file

    Hallo guys,
    I need to generate a 3Dsurface plot starting from unordered coordinates data available in the following
    text file:
    xs,   ys,   zs
    -20,-70,1500
    -30,-55,1500
    -30,-79,1500
    -40,-70,1500
    -10,-70,2000
    -30,-42,2000
    -30,-90,2000
    -53,-70,2000
    -5,-70,2500
    -30,-30,2500
    -70,-70,2500
    -30,-100,2500
    I tried with 3DMesh using the following VB6 code (without valuable results):
    [code]
    rsurf.Open "Select * From surf.txt", _
           connCSV, adOpenStatic, adLockReadOnly, adCmdText
    l = rsurf.RecordCount
    surflbl.Caption = "records" & l
    ReDim xs(l), ys(l), zs(l)
    For i = 1 To l
                xs(i) = rsurf.Fields(0) 'EW (m)
                ys(i) = rsurf.Fields(1) 'NS (m)
                zs(i) = rsurf.Fields(2) 'DEPTH (m)
                rsurf.MoveNext
    Next i
    rsurf.Close
    connCSV.Close
    CWGraph3D1.Plot3DMesh xs, ys, zs
    [/code]
    When i try to convert 3dmesh into 3dsurface, in order to have a smooth surface, i really don't know how to  build the zs(i,j) matrix
    I don't know, further, why data displayed on the plot always start from 0,0,0 coordinates
    Any help and example would be very appreciated
    Beta66

    If your still interested I had some luck doing this....
    Dim xs, ys, zs As Variant
    Dim j
    Dim ArrX(0 To 11) As Double
    Dim ArrY(0 To 11) As Double
    Dim ArrZ(0 To 11) As Double
    xs = Array(-20, , -30, -30, -40, -10, -30, -30, -53, -5, -30, -70, -30)
    ys = Array(-70, -55, -79, -70, -70, -42, -90, -70, -70, -30, -70, -100)
    zs = Array(1500, 1500, 1500, 1500, 2000, 2000, 2000, 2000, 2500, 2500, 2500, 2500)
    For j = 0 To 11
        ArrX(j) = CDbl(xs(j))  'I don't know why but this type cast was required
        ArrY(j) = CDbl(ys(j))
        ArrZ(j) = CDbl(zs(j))
    Next j
    CWGraph3D1.Plot3DMesh ArrX, ArrY, ArrZ
    good luck with your project
    Curt

  • Can't reset project start point

    I decided to add a four bar introduction to a song in logic, and dragged the 'project start' point back to -3 bars. Then I realised when I bounced, it began from 0, so I just selected all and moved everything forward four bars.
    Now, I know I could have used cycle to set my own start and end points for the bounce, but now that I have everything starting at 0, why can I not bring back the project start point to 0? It stays at -3, and I hate having to wait 4 bars for my song to start after I hit O to play the song from the top.
    Can anyone help? Many, many thanks if possible. I'm extremely frustrated!

    Because there maybe is Automation happening before the 1 1 1 1 point. So open any Automation event list with a Keycommand - hit command+1 - a new Arrange page opens displaying the Automation regions - cut those regions at 1 1 1 1 with the scissor tool or by selecting them all and using the Keycommand for "cut at playhead position" and then delete everything before 1 1 1 1.

  • Best way to get small file size/best quality- starting from Logic?

    I am in the process of embedding 3 mp3's into a PDF to submit as a portfolio. The PDF also has text, and two scores included, and with the 3 embedded mp3's it can't be more than 10mb.
    So my question is: When bouncing a project out of Logic, what is the best method for getting the smallest file size, but retaining the best audio quality? And once it's out of Logic and it is an mp3 or other type of audio file, is there a best format for compressing it further, and still maintaining the relative quality?
    I bounced out the three projects into wav's. Now I am using Switch for Mac to compress them down to smaller Mp3's. I basically need them to be about 3 mb each. Two of the recordings sound OK at that size, but they are just MIDI(one project is piano and string quartet, the other is just piano- all software instruments. The recording that combines MIDI and Audio and has more tracks (three audio tracks and 10 Midi/software instrument tracks)and sounds completely horrible if I get it under 5 mb as an mp3. The problem is that I need all three to equal around 9mb, but still sound good enough to submit as a portfolio for consideration into a Master's program.
    If anyone can help I would really appreciate it. Please be detailed in your response, because I am new to logic and I really need the step by step.
    Thank you...

    Hi,
    user5716448 wrote:
    ... Trying this
    REGEXP_SUBSTR ( 'cus_postcode'
    , '(\d+)\D*$'
    , 1
    , 1
    , NULL
    , 1
    'cus_postcode' (inside single-quotes) is the 12-character literal consisting of c, u, s, underscore, p, o, another s, t, another c, another o, d and e. It doesn't contain any digits.
    If you want to use a column called cus_postcode, then lose the single-qutoes.
    >
    where postcode for example DI19 1RI
    Would expect 1 - first number after space starting from right but getting blank.
    What am I doing wrong?
    Thanks

  • Project output from Elements 9 cut in half?

    The file from project output from Elements 9 is cut in half.  What do I do.  You can only see the bottom half.

    Got it.  Removed KB2803821 and everything is working fine again.  Thank you very much for your help!
    Carmen LoParo
    Date: Sat, 20 Jul 2013 17:28:26 -0700
    From: [email protected]
    To: [email protected]
    Subject: project output from Elements 9 cut in half?
        Re: project output from Elements 9 cut in half?
        created by A.T. Romano in Premiere Elements - View the full discussion
    cloparo1
    It is there at the top of the forum
    It should look like
    http://helpx.adobe.com/premiere-pro/kb/wmv-files-corrupted-import-or.h tml http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5523906-365234/450-315/Announc ement.jpg
    The link in the screenshot will not be active since it is only a screenshot. If you cannot find the Announcement, the link the it gives is
    http://helpx.adobe.com/premiere-pro/kb/wmv-files-corrupted-import-or.h tml
    But it is there. So, please try again to find it.
    The following is a link  many, many recent threads on the problem.
    http://forums.adobe.com/message/5522906#5522906
    Please let us know if you find the information that you need and that you are OK with solution.
    Thank you.
    ATR
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5523906#5523906
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5523906#5523906
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5523906#5523906. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Premiere Elements by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • I've lost iWeb and thus my web design.  I must start from scratch.  Should I reinstall iWeb 09 and use that, or is there a better way?

    I've lost iWeb and thus my web design.  I must start from scratch.  Should I reinstall iWeb 09 and use that, or is there a better way?

    The file you really need is named Domain.sites2 which resides in your   Home/Library/Application Support/iWeb foldler.  It's independent from the iWeb application. If it's not in there do you have a backup of your hard drive from an earlier time? 
    Resinatll iWeb 3 from the iLife 09 disk or wherever you got it from originally and then try what's described below:
    In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
    To open your domain file in Lion or Mountain Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
    do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
    tell application "iWeb" to activate
    You can download an already compiled version with this link: iWeb Switch Domain.
    Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
    WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder.  So rename your domain files once they've been created to something other than the default name.
    OT

Maybe you are looking for