Project Status Report - cProjects 4.0 - Run time error
Under Basic Settings, I go to 'Forms for Printing and for Project Status Reports'. Here, under 'Create PDF-Based Forms', I select the form 'DPR_STATUS_REPORT_AIF' and Activate it. I then get to 'Activate Forms per project type'.I get to 'New Entries' and add 'DPR_STATUS_REPORT_AIF' and also set the 'Active' and 'Status Rpt' checked.
When I get to cProjects front end, I see the 'Project Status Report' template under the 'Status Report' tab. However, when I click on the 'Preview' button, I get to see a dump.
"The following error text was processed in the system SRP : WebDynpro Exception: SOAP Framework error: SOAP Runtime Exception: CSoapExceptionTransport : HTTP send returned with status code(100.101)"
Can someone please suggest how to get something useful at the click of the preview button?
Thanks.
Hi,
Yes your basis team should tell you more about this. ADS Credential needs to be installed on the java stack of your cProjects Server. For this you will have to send a message to SAP requesting for the ADS Credential. You will then receive a credential file with its password.
However not all servers support ADS. There is a list of server names that support ADS. You can get the server name on which cProjects is installed from your basis team and I shall let you know if it is supported or not. You can also have a look at in the PAM (Product availability Matrix) for SAP NetWeaver 2004s - Additional Components at http://service.sap.com/pam
Regards,
Reema.
<i>Pl award all useful answers.</i>
Similar Messages
-
Project Status Report - cProjects 4.0
Hi all,
I am using cProjects 4.0.
After selecting the PDF Print form DPR_STATUS_REPORT_AIF for the project type and marking 'Active' and 'Status' report checkboxes, when I go to create Status reports, I can see the template "Project Status Report". However, when I click on the "Preview" button, I get a runtime error saying
"The following error text was processed in the system DRP : WebDynpro Exception: SOAP Framework error: SOAP Runtime Exception: CSoapExceptionTransport : HTTP server replied with status code 500(100.101). "
Can someone suggest please?Hi,
Are you able to open any other pdf forms in cProjects. for eg. approval document?
I guess you need to get the exact location of error.
After the system gives a dump, run transaction ST22 and get the program/function name where the error is actaully occuring.
Regards,
Reema.
PS. pl. award points to all useful answers. -
XL Reporter Run-time Error "0"
Hi All,
I have just upgraded from 2007A SP00 PL42 to V8.8 SP00 PL10. When I click on Tools-->XL Reporter, I get the run-time error "0".
Screenshot as follow:
http://www.sendspace.com/file/qnii6r
I did the following:
- Uninstall SAP Business One Client
- Delete SAP folder under Program Files
- Delete everything in %temp%
- Open Regedit
- Delete iLytix folder from HKEY_CURRENT_USER -> Software. Also check if you find the same entry under HKEY_LOCAL_MACHINE
- Reinstall the SAP Business One Client
XL Reporter did work after that but I face the same error again a few days later. What is happening?This problem for all clients but only 3 clients using XLR. So I'm only fixing 3 clients.
Client A - Reinstall client as stated above and it worked. Few days later, the error came back. So I did what Rahul suggested, uninstall DI API, delete folder SM_OBS_DLL in %temp%, install DI API. No more error. 1 week pass and there is still no error. So I guess that worked.
Client B - Reinstall client as stated above and it worked. Few days later, the error came back. Uninstall DI API, delete folder SM_OBS_DLL in %temp%, install DI API. This didn't work. Same error. Did what Balakumar Viswanathan suggested, execute ComAddIn_per_User_RegKey file but it is still the same.
Client C - Work in progress.
Any idea besides reinstall the OS which I read from another thread? What if the problem still persist after I reinstall the OS? -
Run-time error in S_ALR_87013611
Hi,
Recently we have just upgraded to ECC6.0. One of the reports S_ALR_87013611 is giving run-time errors (unable to set linestyle property) when downloading to Excel using office integration option. We are using Excel 2003 SP3. Surprisingly, this report works on some PC but not on others. All the PCs are setup the same way and using the same application version.
Please help. Thank you.Hello
Run again S_ALR_8703611
-> Error displayed
-> Type SU53 in the dialogue box
-> New screen appears
-> Take a screen shot
-> Send to BASIS for analysis
They should fix this. Looks like some authorisation issue.
Also, check for OSS notes
Reg
Suresh -
CProjects Project status report not generated
Hi
I am facing problem of getting Project status report for a project in cProjects 4.0
I am at client side and accessing the IDES ECC6.Her I am trying for getting Project status report for the project created.
The error I am getting is :
"WebDynpro Exception: ADS: Request start time: Thu Aug 21 16:53:27 GMT+03:00 2008(200,101). "
In customizing for cProjects I have used the std. form available for the same, activated the same for the project type and when tried to get the report I got the above mentioned error.
Then in se38 I executed the programme FP_TEST_IA_01 the result was :
ADS: Request start time: Thu Aug 21 17:23:42 GMT+03:00 2008(200,101)
Also I have activated the following services
SICF->Services->default_host->sap->bc->fp and fpads, both are active.
But still I am not getting project status report from cProjects.
Please guide me what else should I do to get the project status report?
Thanks and Regards,
Niraj SikligarHi Reema,
Its great to hear from you.
I have run the report : FP_PDF_TEST_00
Out put is :
Version Information: 705.20060620101936.310918
What does that mean ?
Secondly,
I have checked RFC destination for ADS the results were as shown below:
On Technical Settings tab page :
target host: ides
Path prefix: /AdobeDocumentServices/Config?style=rpc
Is this OK?
Is there anything else to be done?
Regards,
Niraj Sikligar -
Run time Error while executing project infosystem reports (CN41/41N)
Hi,
I would like to inform while running project infosystems reports (CN41/41N / cns41 etc), it is taking long time & most of the time run time errors are coming. I observed due to more objects in projects, run time error is coming. Request you to suggest to fix the issue.
Thank you for your cooperation.
Regards,
Rakesh PradhanHi Rakesh,
The memory which can be managed by the logical database is approx.
100 MB. You can use the following rule of thumb to calculate the
allocated memory of your selection:
[( sum of projectdefinitions + sum of WBS elements + sum of networks and orders ) * 1 KB + ( sum of activities ) * 4 KB ] *2,5 = memory consumption
Further objects - as relationships, capacities, ... will increase
the memory consumption. (see note 107605)
You can find out the number of objects bein used using the "Test selection scope" (CTRL+F12) button in CN41
Other recommendations are:
1) Check the profile (parameter "rdisp/PG_MAXFS") with your Basis
colleague and adjust upwards (Note 133909)
2) Select a smaller range of objects by using status schema
or more dynamic selections. Please review SAP Note 206264.
3) Please review also 107605, which gives you further information
concerning the selection in Project Information System.
Hope this helps!
Regards
Martina
Message was edited by:
Martina Modolell -
Cannot see project status report pdf inside cprojects using Firefox
Hi,
I am using firefox software to view project status report in cprojects. It shows me blank.
But if I view Approval document, the pdf shows correct in the browser.
As you might be aware,Please note these pdf reports display inside the webpage area,so please donot reply with solutions of opening pdf in separate browser window etc.
Please helpHi,
Are you able to open any other pdf forms in cProjects. for eg. approval document?
I guess you need to get the exact location of error.
After the system gives a dump, run transaction ST22 and get the program/function name where the error is actaully occuring.
Regards,
Reema.
PS. pl. award points to all useful answers. -
Run time error while executing Project Info system Reports
Hi,
I would like to inform while running project infosystems reports (CN41/41N / cns41 etc), it is taking long time & most of the time run time errors are coming. I observed due to more objects in projects, run time error is coming. Request you to suggest to fix the issue.
Thank you for your cooperation.
Regards,
Rakesh PradhanHi,
I would like to inform while running project infosystems reports (CN41/41N / cns41 etc), it is taking long time & most of the time run time errors are coming. I observed due to more objects in projects, run time error is coming. Request you to suggest to fix the issue.
Thank you for your cooperation.
Regards,
Rakesh Pradhan -
Run time Error while executing Project Info system Reports (CN41/CN41N)
Hi,
I would like to inform while running project infosystems reports (CN41/41N / cns41 etc), it is taking long time & most of the time run time errors are coming. I observed due to more objects in projects, run time error is coming. Request you to suggest to fix the issue.
Thank you for your cooperation.
Regards,
Rakesh PradhanHi,
I would like to inform while running project infosystems reports (CN41/41N / cns41 etc), it is taking long time & most of the time run time errors are coming. I observed due to more objects in projects, run time error is coming. Request you to suggest to fix the issue.
Thank you for your cooperation.
Regards,
Rakesh Pradhan -
Cannot load project status report in cprojects on portal
Hi,
I have checked all the FP_* adobe test programs and my ADS is working fine. I did test my form in ECC transaction code sfp and the form loads properly.
But, when I try to load the project status report(same form) through portal (cprojects)it is giving me connection timeout error.
Could somebody guide me?
Thanks.Hello,
there can be several reasons why the Statusreport does not come up
a) ACF component is not installed correctly
Check as described in note [766191|https://service.sap.com/sap/support/notes/766191] if the ACF is installed correctly
b) ADS is not set up correctly
Check as described in note [944221|https://service.sap.com/sap/support/notes/944221] if the ADS is installed correctly
c) cProjects config for the status reports is not set up correctly
Check as described in note [978997|https://service.sap.com/sap/support/notes/978997] if your system is set up according to the configuration guide
Best Regards, Andrea
Edited by: Andrea Langlotz on Jun 11, 2008 8:55 AM -
CProjects 4.0 - Project Status Report
Hi All,
I am using cProjects 4.0
Under SPRO, I get to "cProjects > Basic Settings > Forms for Printing and Project Status Report".
Please list out the sequence of activities to enable me get and use Project Status Report from the front end. A detailed response would be highly appreciated.
I tried a few things which aren't quite working
Thanks very much.Hi Bittu,
Go to SPRO
-> cProjects->Basic settings->Templates for Printing and for Project Status->Create Temples and then Activate Templates per Project type
After the above settings are done, the Project status report from the front end is enabled and you can view them in cProjects.
Wish you much success.
Bye Dudle -
Project Status Reports for cProjects 4.0
Hi Experts,
Does anyone have a document in which functionalities of <b>Project Status Reports</b> are detailed?
I would want to know <b>which kind of data can be extracted</b> from projects and if <b>operations</b> like sum, substraction, aggregation, grouping can be made in these reports...
In addition, if you had some documents about how a Project Status Report looks like it would be also good to have.
Please send the documents to: [email protected]
Of course, <b>reward points</b> will be given for all useful answer...
Thank you all in advance.
Kind Regards,
IsabelHi Yasar,
Thank you very much for your document, although that is not really what I was looking for.
I need to design a Project Status Report, so I want to know how does it work, which data does it use (which is the data that can be reported and which data can't), if you can select the data to appear or group it by some attributes, if the manual comments can be inserted attached to each of the data reported (comments related to all phases reported).
So I still need some further details on this (version 4.0 with AIF documents).
Thank you very much!
Kind regards,
Isabel -
Cannot load Project status report
Hi,
I clicked on "Preview" button to load the project status report, but the timer stays on and lastly connection times out.
Could somebody help as to why it is happening?
ThanksHello,
there can be several reasons why the Statusreport does not come up
a) ACF component is not installed correctly
Check as described in note [766191|https://service.sap.com/sap/support/notes/766191] if the ACF is installed correctly
b) ADS is not set up correctly
Check as described in note [944221|https://service.sap.com/sap/support/notes/944221] if the ADS is installed correctly
c) cProjects config for the status reports is not set up correctly
Check as described in note [978997|https://service.sap.com/sap/support/notes/978997] if your system is set up according to the configuration guide
Best Regards, Andrea
Edited by: Andrea Langlotz on Jun 11, 2008 8:55 AM -
Gantt Chart in Project Status Report
Hi Folks,
We are doing a custom development and creating our own Project Status Report PDF form. Is there a way (standard FM or otherwise) to generate a Gantt chart and show it on the PDF form.
The Gantt chart itself is not of the whole project structure. It is only the phases. Most projects will have 4-5 phases maximum. The Gantt chart also does not need to be too sophisticated, we just need a high level graphical representation of the phase timelines.
Let me know if my question is not clear and I can elaborate.
Thanks
LashanHello Lashan,
Building the Gantt chart in a PDF report is quite tricky. The Gantt chart view you see in cProjects is a different SAP component, JGantt (developed in Java), which is connected to the system.
Adobe forms don't have a standard Gantt element, so you'll have to render it somewhere else and send it to the form in a binary format.
For creating and rendering the graphic you can use the SAP IGS (Internet Graphics Service).
You can find some details here: http://help.sap.com/saphelp_nw04s/helpdata/en/17/86c039c7811f11e10000000a114084/content.htm
This is a little bit more complicated, you also need to use iXML libraries to transform all the Gantt data into the IGS required format.
The end result will not really look like the Gantt view, but it will contain all necessary information:
Is this the kind of graphic you need to develop?
Cheers,
Tudor -
Run time Errors GETWA_NOT_ASSIGNED at Time of Print Reports.
Hello hy All experts.
I ma trying to print Reports, but at time of preview i got an error message. Run time Errors GETWA_NOT_ASSIGNED.
Please Give me Solutions.
Thnks
Bhavesh Panchal.
BarodaFORM fetch_data.
break mtabap.
SELECT *
FROM vbep
INTO TABLE it_vbep
WHERE edatu IN so_edatu
AND vbeln IN so_vbeln.
IF NOT it_vbep[] IS INITIAL.
SELECT *
FROM vbak
INTO TABLE it_vbak
FOR ALL ENTRIES IN it_vbep
WHERE vbeln = it_vbep-vbeln
AND kunnr IN so_kunnr.
ENDIF.
IF NOT it_vbak[] IS INITIAL.
SELECT *
FROM vbpa
INTO TABLE it_vbpa
FOR ALL ENTRIES IN it_vbak
WHERE vbeln = it_vbak-vbeln
AND posnr = space.
SELECT *
FROM vbap
INTO TABLE it_vbap
FOR ALL ENTRIES IN it_vbak
WHERE vbeln = it_vbak-vbeln.
Select all Customer Data
SELECT * FROM kna1 INTO TABLE it_kna1
FOR ALL ENTRIES IN it_vbak
WHERE kunnr = it_vbak-kunnr .
SELECT *
FROM vbkd
INTO TABLE it_vbkd
FOR ALL ENTRIES IN it_vbap
WHERE vbeln = it_vbap-vbeln.
and posnr = IT_VBAP-POSNR.
SELECT *
FROM vbbe
INTO TABLE it_vbbe
FOR ALL ENTRIES IN it_vbap
WHERE vbeln = it_vbap-vbeln
AND posnr = it_vbap-posnr.
SELECT *
FROM vbup
INTO TABLE it_vbup
FOR ALL ENTRIES IN it_vbap
WHERE vbeln = it_vbap-vbeln
AND posnr = it_vbap-posnr.
SELECT *
FROM konv
INTO TABLE it_konv
FOR ALL ENTRIES IN it_vbak
WHERE knumv = it_vbak-knumv
AND kinak = space .
SELECT *
FROM vbrp
INTO TABLE it_vbrp
FOR ALL ENTRIES IN it_vbak
WHERE aubel = it_vbak-vbeln.
IF NOT it_vbrp[] IS INITIAL.
SELECT * FROM likp
INTO TABLE it_likp
FOR ALL ENTRIES IN it_vbrp
WHERE vbeln = it_vbrp-vgbel.
SELECT * FROM lips
INTO TABLE it_lips
FOR ALL ENTRIES IN it_vbrp
WHERE vbeln = it_vbrp-vgbel
AND posnr = it_vbrp-vgpos.
ENDIF.
ENDIF.
LOOP AT it_vbap.
itab-posnr = it_vbap-posnr.
itab-posar = it_vbap-posar.
ITAB-BRGEW = IT_VBAP-BRGEW.
itab-brgew = it_vbap-brgew.
itab-ntgew = it_vbap-ntgew.
READ TABLE it_vbak WITH KEY vbeln = it_vbap-vbeln.
itab-vbeln = it_vbak-vbeln.
itab-netwr = it_vbak-netwr.
itab-kunnr = it_vbak-kunnr.
READ TABLE it_vbep WITH KEY vbeln = it_vbap-vbeln.
itab-edatu = it_vbep-edatu.
READ TABLE it_kna1 WITH KEY kunnr = it_vbak-kunnr.
itab-name1 = it_kna1-name1.
READ TABLE it_vbkd WITH KEY vbeln = it_vbap-vbeln .
itab-bstdk = it_vbkd-bstdk.
itab-bstkd = it_vbkd-bstkd.
READ TABLE it_vbrp WITH KEY aubel = it_vbap-vbeln aupos = it_vbap-posnr.
READ TABLE it_lips WITH KEY vbeln = it_vbrp-aubel posnr = it_vbrp-aupos.
itab-delivery = it_lips-vbeln.
itab-lfimg = it_lips-lfimg.
READ TABLE it_likp WITH KEY vbeln = it_vbrp-aubel .
itab-lfdat = it_likp-lfdat.
itab-ntgew = it_likp-ntgew.
break mtabap.
READ TABLE it_vbup WITH KEY vbeln = it_vbap-vbeln posnr = it_vbap-posnr.
itab-lfsta = it_vbup-lfsta.
READ TABLE it_vbep WITH KEY vbeln = it_vbap-vbeln posnr = it_vbap-posnr.
itab-wmeng = it_vbep-wmeng .
itab-bmeng = it_vbep-bmeng.
READ TABLE it_vbbe WITH KEY vbeln = it_vbap-vbeln posnr = it_vbap-posnr.
itab-omeng = it_vbbe-omeng .
READ TABLE it_konv WITH KEY knumv = it_vbak-knumv
kposn = it_vbap-posnr
kschl = 'PR00'.
ITAB-KBETR = IT_KONV-KBETR / 10. " CONDITION RATE
itab-kbetr = it_konv-kbetr.
itab-kwert = it_konv-kwert . "CONDITION VALUE
itab-pending_val = ITAB-OMENG * ITAB-KWERT .
itab-pending_val = itab-omeng * itab-kbetr .
APPEND itab.
ENDLOOP.
ENDFORM. "data_retrieval
*& Form build_listheader
text
-->IT_LISTHEADER text
Show quoted text -
FORM build_listheader USING it_listheader TYPE slis_t_listheader.
DATA HLINE TYPE SLIS_LISTHEADER.
DATA: ls_line TYPE slis_listheader.
bhavesh
HLINE-INFO = 'report Developed by Bhavesh'.
HLINE-TYP = 'H'.
Header
Bhavesh
CLEAR ls_line.
ls_line-typ = 'H'.
LS_LINE-KEY: not used for this type
ls_line-info = 'Sales ORDER Report'.
APPEND ls_line TO it_listheader.
bhavesh
***Selection
CLEAR ls_line.
ls_line-typ = 'S'.
ls_line-key = 'Key 1'.
ls_line-info = 'SFEL'.
APPEND ls_line TO it_listheader.
ls_line-key = 'Key 2'.
ls_line-info = 'SFEL'.
APPEND ls_line TO it_listheader.
***Action
CLEAR ls_line.
ls_line-typ = 'A'.
LS_LINE-KEY: not used for this type
ls_line-info = 'Status list'.
APPEND ls_line TO it_listheader.
ENDFORM. "BUILD_LISTHEADER
*ENDFORM. "build_listheader
*& Form display
*& text
FORM display.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_callback_top_of_page = 'TOP_OF_PAGE'
is_layout = alv_layout
it_fieldcat = i_fieldcat
it_events = gt_events[]
i_callback_user_command = 'USER_COMMAND'
i_grid_title = 'BHAVESH REPORT'
TABLES
t_outtab = itab[].
CLEAR : itab .
ENDFORM. "display
*& Form top_of_page
text
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = it_listheader[].
i_logo = 'ENJOYSAP_LOGO'.
I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
Maybe you are looking for
-
Bom dia, Segue a todos a explicação do meu problema: O meu cliente alega que possui diferentes alíquotas de ICMS sobre o frete, para um único origem x destino. De acordo com ele, essa diferenciação dá-se ao fato de o cliente ser um consumidor final o
-
Wireless mouse lock-ups (Rapoo 1620)
Hi, I've been using my wireless mouse more recently (Rapoo 1620) on my 64-bit installation of Arch Linux (64-bit, using XMonad), and it generally works okay but with a frequent slightly annoying issue - it tends to stop working after I switch to typ
-
I can't post to any other forum
I tried to post to Apple.com > Support > Discussions > User Tips Library > User Tips Library and I was denied permission. ?!@## Why can I only post to Unix board? X TiG4/667 Mac OS X (10.2.x) TiG4/667 Mac OS X (10.2.x) TiG4/667 Mac OS X (10
-
How to pass a internal table into Java Bean
Hi Experts, I created a JSPDyn page to display Sales orders form R/3 using bapi_sales_order_getlist. I used JCO to establish connectivity between JSP Dynpage and R/3. I executed the bapi successfully, i want to move the sales orders retrieved from th
-
I'm looking to find a developers version download of ColdFusion 8 and 9. The links I've found on the web are now all redirecting to the download page for CF10. Are these still available? The CF 8 and 9 exams are so you'd think the dev versions would