Project Structures out of Sync on a Shared Project

Hi All,
We are on 12.2.3. Facing a Problem with Syncing Project Structures for a Shared Project. Workplan is not reflecting the Financial Structure created with multiple hierarchy levels. Let me know if you have seen this issue before.
regards,
Sameer

All:
I figured it out I just set my scope to measure a fraction of the signal I'm looking for and put all of that into a while loop, so far I'ts worked beautifully. Thanks for everyone's help I really appreciate it. Attached you will find the VI I used to solve my problem.
Attachments:
Phase Delay Comparison.vi ‏32 KB

Similar Messages

Audio and Video out of sync in shared iMovie file

Hey Guys -
Quick question, I've created a new trailer in iMovie, all works fine but the audio and video is out of sync in the shared file. How to fix it?
Thank you
MondCharlie

For what it's worth, I'm having what looks to be the same problem. Driving me insane. Here's what's going on-
Editing in FCP 6.0.2
QT was just updated to 7.3.1 the other day (hmm)
On an MacBookPro machine, OS 10.5.1
Software updater says everything's up to date of course.
DV-NTSC 24p (23.98) Advanced Pulldown Removal (footage was shot at 24PA on a DVX100b)
In Quicktime, the file previews fine, everything's in sync, everyone's happy. In FCP, the video and audio are wildly out of sync. I did a test inside of quicktime and sliced out a small portion of the media clip and did a "save as" and this small slice played in sync in FCP. However, this did not work for the entire clip. Clip is weighing in at 5.58GB for a 32 minute run.
I'm trying to multicam 2 tapes together and manually syncing these up is proving to be difficult at best. When anyone gets any ideas/leads/patches, let us know.
Grr,
Nicole
Editor, RHED Pixel

Clips from Project bin to source monitor causing video output to go out of sync(CS6 and CC)

Any footage I double-click or drag from the Project window to the Source monitor causes my video output to go out of sync. When I put the clips in the timeline, video goes back in sync and I'm able to view video output. My monitors are connected to a Blackmagic Intensity Shuttle Thunderbolt(9.7.5) via component and HDMI. Is this normal behavior in Premiere or is there a setting to enable this? No issues doing this in FCP7(clips from Project window to Canvas).
Can someone with an I/O from AJA, Matrox, or Blackmagic please test this out for me. Thanks...
2012 Macbook Pro
MacOS 10.8.3

Hi Joe,
How do you have your audio setup? Try the following.
- Set your OS system sound to Built-in or Line out audio
- Select Blackmagic for both Video and Audio in Preferences> Playback
- Select System Default Input/Output from Preferences> Audio Hardware
Hope this helps,
Peter Garaway
Adobe
Premiere Pro

Audio goes out of sync when i open project on diff macs

i have an iMovie project created on an iMac saved to an external.
I go to open the project up on my macbook and the audio is out of sync.
I go back to my iMac with the same project and it works just fine.
I'm a bit confused because both macs use Mac OS X 10.6.4 and iMovie 8.0.6
what other differences might there be?
any input is appreciated as I'd love to work on projects while out in the field!

Try exporting the iMovie project as a single full quality dv format quicktime file.
I use iMovie6 HD and this is my usual procedure that works well.
Make the movie in iMovie, will involve many separate clips. When finished, export (share) as a single full quality dv format quick time file. When I have an hours worth of smaller projects, I create a new iMovie project and import all of the quicktime .dv files for each separate short project. I add chapter markers in this project, then share with iDVD. I then burn an hours worth of stuff at best quality and distribute to family and friends.
iDVD seems to work better with iMovie source that has fewer clips.
BTW: Are you having problems with standard def or hi def iMovie source. Another part of my procedure is that I take the raw tapes and download the entire thing into one iMovie project. I don't edit or change the footage at all, just want to archive to DVD for posterity. In this case, I want to share the iMovie project with iDVD directly. This has worked OK for standard def projects, but my first hi def project (1080i) that I tried, the sound was out of sync. To fix this, I had to create a regular DV widescreen iMovie project, and drag all the clips into it from the HD project. It took over an hour for my humble mac mini to convert the files, but I was then able to share with iDVD and the finished DVD worked ok.
Hope this helps.

Published mp4 lags, is out of sync, and does not match the Project Preview - help please!

My Captivate 7 project includes two video demo slides with audio narration. The published mp4 video is vastly different from what it should be and how it shows in a preview in Captivate. I have tried publishing it again twice - once I changed the settings by clicking "Force republish all the slides" in the Advanced Options but the published mp4 is still messed up - the video freezes while the audio proceeds and other out of sync problems.

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Final Export of a Project Slightly Out Of Sync

Hi there,
I'm trying to find an answer to what seems to be a common issue when exporting projects out of Final Cut Pro X, however I haven't yet found any answers that work or that tell me things I don't already know (don't mean to sound know-it-all though).
The issue is that after I have exported my project, the audio and video are out of sync. It doesn't drift as the video goes on; it's out of sync by the same amount from start to end. Of course, when editing and viewing the project in Final Cut, the sync is fine.
The project was created from scratch with the Apple ProRes 422 setting, the two original camera angles were both 25p, the audio I'm using is 48K/24bit which the project is setup as also. The audio was originally recorded at 48k/24bit and mixed seperately in Pro Tools and was exported as a wave file (48K/24bit) and brought back into Final Cut.
I can't think of what else to describe. All the project settings and the original footage and audio setting are exactly matched. There's no frame rate changes, no audio resolution changes, no MP3 in the mix, no apparent issue when viewing/editiing in the project, and I even tried optimising the video and exporting just to see if that made any difference.
I usually listen to the audio via an RME souncard which is setup to be low latency. However, whether I view the project and then export via the external audio interface, or view the project and export via the laptop speakers (with not extrernal audio interface connected) it's the same result: slightly out of sync video!
If anyone has any ideas I would be most grateful.
Cheers,
Chris

Hey Russ,
Thanks for your time. When I say a 'common issue' I found that when I searched it both on Google as well as this support forum I found multiple threads and questions pertaining to this issue of sync and/or drift.
I tested this single angle idea by using the footage in a nother project and exporting part of that (without changing angles) and it seemed to be OK. However I have other projects which are only single angle but they export slightly out of sync as well. I haven't found a common denominator yet.
When I say out of sync, it's not dramatic, however it's always the same - the audio is just a few frames behind the video. This has happened with most of my projects using different footage and different audio, etc. No matter what setting audio and video are recorded at, and regardless of whether I dramaticallty colourise or add effects to the video or not, it's always the same result; slightly behind audio when exported.
With regard to presets, do you meet export settings? If so, I'm mostly exporting using H.264 and as a Quicktime Move (AAC) output. I've tried various resolution changes and tinkering but nothing has changed.
If you're referring to project setup presets, I can't really change too many things because obviously the audio resolution and video frame rates are predetermined so I can't try 25p footage in a 30p project, etc.
Thanks again,
Chris

Motion project exports out of sync

Hi - I'm quite new to motion and have just learned to use it for keying - however I'm quite perplexed by the fact that whenever I export my finished project, it plays back out of sync. I am working at HDV 1080i50 mode, (fairly certain there is nothing telling the machine it's NTSC or anything...)
Does anyone have any ideas?
Best wishes, Dan

HDV files are probably to hefty to be using in Motion. Try exporting them as Pro Res and reconnecting them. You could also try to bring the Motion Project into FCP and exporting from there.... On other thoughts, does your project have a separate audio file being used? If so, You might want to export the audio file as another format or change it's bit rate.

Audio/midi out of sync when project moved from different computers

i work on logic with both my imac and macbook. when i move project x from one to the other machine (in either direction) the audio and midi get out of sync. as i do not do things to the grid, i can't specify how far things are going out of wack. recording delay settings are the same, as are those for buffer size, etc. I am using a Duet interface with both machines.
any help is greatly appreciated!

Hi,
Have had the same problem but with Powerpoint. All I could imagine is that this problem has something to do with the difference of the internal speed of the Imac and MacBook Pro. Solution: nothing but always working on the same machine (for me).
PeKes

Audio/video out of sync on project, raw okay

Okay, I have a project where the Audio and video get out of sync in cs5, but the original file is just fine.
So, my file is an mpeg 1440/1080 4 hour 40 minute, 53Meg file. When I preview it in a viewer like media player, it plays perfect, no video/audio
sync issues.
But, with this file in a Pro CS5 project, the video/audio lose sync. I have found this has messed up a lot of my final products which I had not seen.
So, any ideas?

Have you installed the recent updates?
There was a bug fix in a recent update for audio/video synchronization issues. The bug was in the indexing and conforming phase, so you would need to clear the media cache and re-index the assets for the fix to take effect.

FCP Send To STP Multitrack Project - Audio out of sync

I'm editing video in FCP and sent the audio as a multitrack project to STP and upon opening it in STP the audio is already out of sync - even without touching it. I thought maybe it would go back in sync upon sending it back to FCP, but it stays out of sync there too.
It appears I'm having the same problem as this person who created a screencast on how to fix it: http://www.screencast.com/users/hatuckett/folders/Default/media/d781e0cb-8689-44 4e-9c49-7e8592e86052 I tried their solution and for whatever reason it doesn't work for me.
This isn't just happening with 1 video or project, it's happening with ALL of them. All of my video is PAL. I'm using PAL video and I've made certain in STP in the Project Preferences setting to change the videos frames per second to 23.98. Yet, the audio remains out of sync. Is there anything else I can do to insure that the audio file when imported and exported in and out of STP remains in sync with the original FCP video?
I am using Soundtrack Pro 3.0.1 and FCP 7.0.2. Thanks in advance.

There is a mismatch somewhere which is causing this sync problem.
Next thing to try - does your STP project sample rate match the sample rate of the audio in your FCP project?
In the STP project, on the projects tab, is "none" selected in the pullup/pulldown section, both audio and video?
In some cases, changing a frame rate can change the speed of the video, causing sync problems, so the earlier discussion about frame rates wasn't just semantics or terminology issues. I understand your frustration, but I was trying to help by ruling frame rate problems out.

Deleting Scenes - Project goes out of sync !!

When I delete a scene from my project, the music and titles go out of sync. How can I delete a scene without affecting the rest of the project. TIA

I find it hard to believe that you shouldn't change your album as iMovie '08 handled it perfectly fine and never got the thumbnails muddled up.
Seems strange that it's working as designed. I can only assume there are some extra behind the scenes processing that now occurs when prevents the user from ever changing the album. Interesting.

Quicktimes in sync but project out of sync

I just re-captured clips at 10801 25 Apple ProRes 422 HQ and they play back in sync in Quicktime, but in my timeline they are out of sync- does anyone know why this could be? The sequence settings match the clips. Thanks

i exported a qt movie from my sequence and it looks in sync! so I am assuming the computer i am using is too slow to play back the right time code from the timeline and all will be fine once i get this on a faster computer.
thanks-

Out of sync audio when burning a DVD with iDVD

Hello Folks,
I'm trying to burn 3 - 1 minute quicktime files to a DVD using iDVD 7.1.2 and everytime I burn a disc the sound is out of sync. It seems to speed up and finish about 10 seconds earlier than the video. When previewed all is fine. I have checked the 3 quicktime files and they are perfectly in sync when played. Any suggestions ?
Thanks

Hi Bengt,
Thanks for replying ! I spoke with tech support and we tried everything including saving it as a disk image but after the burn it still was out of sync.
Then we tried creating a project in i Movie and then imported (shared) the project into i DVD and it worked !
This was a frustrating issue to tackle but I'm ready for it if it happens again.
Thank you very much for your help. Have a great day.
Best regards,
Joe F

Out of sync exports

Hi,
we have this recurrent but intermitent problem:
When exporting (sharing) in Master File mode, Apple ProRes 422 with Roles as Multitrack (8 mono tracks), some of our projects are out of sync by a frame.
This we can see with a one frame 1khz beep set at 9:59:57:00 in the leader we use. On the export the beep ends up one frame early and the the whole export is out by a frame.
Most of our material is mxf wrapped xdcam hd or sd edited directly in fcpx using Hamburg Pro Media mxf plugin.
But the out of sync exports happen with other material too.
The problem is not constant as sometimes, after a few attemps we get a correct file.
We've tried rebooting fcpx, rebooting the whole machine, ditching render files, none of this guarantees us a perfect result.
Our leader is made of a Generator created in Motion for the slate, followed by a clip of Bars and Tone followed by more of the same generator followed by a self contained countdown built in Motion.
As Generators in Motion are sometimes buggy we suspected this as the source of the problem but we've had the same out of sync experience without using the leader...
help would be welcome as we can not accept a one frame out of sync master file and we need to have absolute trust in the exports we produce.
thanks

Did you talk with AJA before upgrading? What do they say are the most current supported versions of OSX, FCP & QT?
x

PP CS4: .avi audio/video out of sync

Hi, I just got Premier Pro CS4 because I felt too limited by Vegas Movie Studio.
I started a new project and imported the video files I wanted to use, but I'm having a strange issue. When I import .avi files and scrub through them, the audio will not skip forward, it will continue to play in order from the beginning of the video. Also when I import .avi files, a ! appears in the lower right-hand corner. When I click on it, it says: File importer detected an inconsistency in the file structure of [file].avi Reading and writing this files metadata (XMP) has been disabled.
This does not happen when I use .mp4 files.
I suspect if I converted my .avi files to .mp4, the problem will be solved (I am testing this theory now), but I literally have over 100 .avi files and it's taking a long time to convert one file, let alone 100+.
Does anyone have any suggestions? Do I need a codec? I have a DivX codec installed. Do I need to uninstall it/get a different one?
Thank you for the help! I'm looking forward to using Premier once this issue is settled.

Xvid is the open source version of DivX. They are very, very similar.
I would convert all of the DivX and Xvid material to something that PrPro can handle perfectly. If SD material, on a PC, then DV-AVI Type II w/ 48KHz 16-bit PCM/WAV would be perfect.
While some have actually gotten DivX, or Xvid files to Import, into PrPro, few have been without some fairly major issues, such as no Video, bad Video, no Audio, or horribly out of sync Audio.
Those two CODEC's are delivery-only formats, and are not really meant to be edited later - only viewed.
Good luck,
Hunt
PS - I use an older shareware program, DigitalMedia Converter 2.7 (Deskshare), and it works well with both DivX and Xvid, going to DV-AVI. However, Deskshare has vastly updated from version 2.7, so I have no idea how well the new versions work.

Project Structures out of Sync on a Shared Project

Similar Messages

Maybe you are looking for