Project system configuration notes

Dear all,
send me project system config notes
Point will be assined
venkat1233atgmail.com

Dear Venkat,
Try out this link to start into Project systems.
http://www.sap-topjobs.com/SpecialPP/SAPPS.pdf
Regards,
Chintan Joshi

Similar Messages

  • Project system configuration

    Hi Friends i am new to this PS module ,i am very much interested in PS module , i searched some websites and also some links in this forum regarding configuration but i am not able to do, friends can u help me out in this. Give some hints and configuration steps for investment programs.

    Refer Building Block:
    http://help.sap.com/bp_bblibrary/600/BBlibrary_start.htm
    Refer: J12: Project System
    U can download PDF file of PS functionalities from below web site
    http://www.sapprojectsystem.com/

  • Apple Hardware Test: System Configuration not Supported

    I wanted to run Apple Hardware Test on a Quad G5. Right after it launched, it gave me a message that my system configuration was not supported (sorry... I don't remember the exact message).
    My Quad was shipped with an nVidia 6600 graphics card (before the 7800GT was available). I recently upgraded from that 6600 to a 7800GT. Could that be the issue?
    It's possible I was trying to run an old version of AHT. The disk was labeled:
    Mac OS version 10.2.7 (G5)
    AHT version 2.1
    DVD version 1.2
    691-4657-A
    If I am running the wrong version, I'd order another copy from Apple (lots of posts on how to do that) but I have one concern: one post said that Apple would only ship the original disks, which brings me back to the first question: would an upgraded video card cause AHT to complain that it didn't support the configuration?

    It's possible I was trying to run an old version of AHT.
    You were. The Apple Hardware Test intended for your G5 is a bit hidden; you need to insert its first original disk and restart with the Option key held down to access it. Once you see it, click on it and push the button with the straight arrow.
    (42101)

  • EPM System Configurator not prompting to use existing tables

    Planning 11.1.1.3.
    Oracle Database
    Planning database configured using advanced jdbc URL with alternative servers.
    Above is what we have installed and configurations settings we are using.
    In the short of it, Our Oracle DBA changed the servicename for the Oracle database to go from <SERVICENAME> to <SERVICENAME.world>. Even going thru TOAD we have to use <SERVICENAME.world> now. When they did this our QA environment is now down and we have to reconfigure all of the databases to account for the new servicename.
    We successfully reconfigured the SharedServices database just using the option to connect to an existing configured database and correcting the servicename, and it is working normally.
    For all other products we will have to use the configure for first time option to be able to change the properties.
    HOWEVER, when we use the 1st-time configuration for planning we are able to correct the properties for the connection and set the new servicename, but when we click next I would expect to be asked whether to reuse the existing tables or drop/recreate them, however, the screen just steps forward to the confirmation screen. In the configtool.log I have the following message:
    (Oct 28, 2010, 11:18:12 AM), com.hyperion.planning.HspDBConfigurator, DEBUG, Planning tables exist already but will reuse it as upgrade now -- should be 9.3.X upgrade.
    We want to be assured that performing the step without having the option to reuse tables will not wipe and recreate the planning system database.
    So:
    1. Why do we get this error when trying to reconfigure the planning database? Can we ignore it?
    2. What steps do we have to take to ensure that the Servicename is updated in all configuration files, and database locations it is in?
    3. Is there any viable way to do this outside of the configuration utility? (For example only editing files and registry)? If so what steps are required?
    I would greatly appreciate it!
    Robert

    I am on 11.1.2.1. I was able to find the solution. I went to the C:\Users directory and copy the oracle.instances file from the original temp ID that had performed the installation onto the account that I want to use going forward. That resolved my issue and I am now able to start EPM configurator for update as well.

  • Reg. Project System configure documents

    Hi Guru's
    Can any body able to provide me the bpp or congifure doc of ps module along with ppt of operation transaction and tagging of master data with other modules.
    Regards

    Hi
    Please check help.sap.com and you will get all the required information on line.
    Thanks

  • Internal Orders versus Project Systems

    Hi
    My client is currently using WBS elements for capital projects.   Project System is not in scope; thus, we are trying to decide whether we should bring it in scope with limited functionality or use internal orders for capital projects. I'm writing a position paper describing comparison of using project system versus internal order. Can any one of you please help me in providing the differentiating points. And also can you please give a description of capital projects.
    Thanks a lot in advance.

    Hi,
    To begin with Internal order is a cost object like the WBS elements and activities in the Projects.
    For the capital Projects following are the Points that should Favor the PS as compared to Internal Orders:
    1. Time planning Possible
    2. Resourse Planning possible.
    3. Capacity planning and leveling possible.
    4. Cost planning is possible in detail.
    5. Material Planning possible.
    6. Budget planning is possible in detail for the various phases of the project.
    7. Cost and Budget monitoring is possible at the various phases in detail.
    8. For the long term projects the Cash management is possible.
    9. Revenue Planning and monitoring is possible in details.
    Above all the PS is more flexible in handling all the project related issues than Internal order.
    Now its upto one to use the functionality of PS to one's requirement.
    In short PS module is like an Expert Doctor than a general physician.
    Hope its useful.
    Reward points if useful.
    Thanks..

  • WBS Elements not getting created in ECC Project System from CRM 7.0

    Dear all,
    We are trying to integrate SAP CRM 7.0 with SAP ECC-PS module. The objective is to bring in the marketing plan and elements data from the CRM system, and to create the corresponding WBS in project system. We have done most of the configuration as recommended by SAP in both the systems, and we see that the BDOCS are getting generated and sent to the ECC system. The following steps have been successfully completed:
    1.       Set up the RFC connections between the two systems
    2.       Selected the connection type as Middleware in CRM system.
    3.       Installed the cProject Add on in CRM box.
    4.       Created a project scenario (with project and network profiles) in the PS system and assigned the same in the CRM system.
    5.       The Project Scenario in PS config has the same name as the Project Type in CRM config.
    6.       Created and released the campaign ids being created in the CRM system.
    As already mentioned, we can see that the BDOCS are coming to the ECC system and are getting stored in BDOC_TRACK table. However the issue is that the corresponding WBS elements are not getting generated in the ECC system. Is there anything that that we are missing in the ECC box which would trigger the WBS element creation?
    Request you all to share your inputs which would be immensely beneficial for us in achieving this integration.
    Thanks and Kind Regards,
    Aditya Shrivastava

    Hello Aditya,
    We too are facing this issue.. if you have resolved the issue could you please let us know the solution ?
    Some inputs related to our system,
    We have upgrade from CRM 4.0 to CRM 7.0 SP07 and R/3 backend system is on 4.7 SP27, earlier we have completed the upgrade on sandbox without any issues which was upgrade to CRM 7.0 SP04 but with SP07 we are facing the problem of WBS Element not getting created in R/3.
    Your help is highly appreciated.
    Thanks & Regards,
    Sumukh Kapoor.

  • Could not retrieve deployment system configuration

    I use NWDS 7.1 and i want to deploy an external deployable archieve file,when i deploy , i get error says that "Could not retrieve deployment system configuration for ABP"
    Before that, i made settings under SAP AS Java by adding new SAP system, giving  hostname and instance number . I managed to add new SAP server successfully...
    Is there another settings that i forgot..and settings of editon 7.1 is different from 7.0...because in 7.0 it ask me hostname and MESSAGE SERVER PORT..
    What can i do ?
    Thanks a lot..

    The problem I faced was related but just slightly different - solution is below.  This is really only an issue if your AS Java server is on a different server than your NWDS and a firewall is active.
    Error when trying to publish ConverterWeb demo project from local dev machine CE 7.2 Netweaver Developer Studio  to server CE 7.2 AS Java was:
    Could not retrieve deployment system configuration for CE1. Please check if the system is running.
    [ERROR: 7/10/10 10:58 PM /userOut/daView_category (eclipse.UserOutLocation)
    Thread[Thread-22,5,main]]
    Issue is a firewall problem.  Solution  is:
    1) remove default SAP AS Java from NW Developer Studio (Windows -> Preferences -> SAP AS Java
    2) shutdown NWDS
    3) open ports 50113 (port for instance 1), 50013 (port for instance 0), 50004 (deploy port) and 5000 (http for NWASJAVA) on the AS Java server.
    4) open NWDS
    5) add SAP AS Java in NWDS (Windows -> Preferences -> SAP AS Java: host - 192.168.1.16, instance - 1, Domain - Default
    6) add SAP AS Java in NWDS (Windows -> Preferences -> SAP AS Java: host - 192.168.1.16, instance - 0, Domain - Default
    7) publish ear.
    8) navigate to: http://192.168.1.16:50000/ConverterWeb/
    obviously you'll need to replace the internal ip with the ip of your server.
    I think this firewall info is somewhere in the docs.
    Edited by: adamtarshis on Jul 11, 2010 8:16 AM

  • Error: Could not retrieve deployment system configuration

    Hi,
    when I'm trying to list deployed components in the deployment perspective of my NW Developer Studio (7.2), I get the following error. It seems that the NW server is not reachable, but I had a look at the management console on the server - everything is running.
    Exception occurred during the 'List Components' operation.
    Cause:Could not retrieve deployment system configuration for CE1. Please check if the system is running.
    Exception:
    com.sap.ide.eclipse.deployer.api.APIException: Could not retrieve deployment system configuration for CE1. Please check if the system is running.
         at com.sap.ide.eclipse.deployer.DeployerPlugin.getCurrentServerInfo(DeployerPlugin.java:105)
         at com.sap.ide.eclipse.deployer.DeployerPlugin.getClient(DeployerPlugin.java:201)
         at com.sap.ide.eclipse.deployer.ui.UIUtils.getClient(UIUtils.java:212)
         at com.sap.deployment.ui.nodes.SystemNode.fetchData(SystemNode.java:84)
         at com.sap.deployment.ui.nodes.SystemNode.refresh(SystemNode.java:78)
         at com.sap.deployment.ui.view.RepositoryJob.run(RepositoryJob.java:26)
         at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
    In addition, I noticed that if I add the NW server in the developer studio (preferences > SAP Java AS), only on server instance is listed (SCS01). Normally (after NW installation), two instances have been listed there.
    The error prevents to deploy anything from within the developer studio. Does anyone have a clue about that? Thanks in advance!

    The problem I faced was related but just slightly different - solution is below.  This is really only an issue if your AS Java server is on a different server than your NWDS and a firewall is active.
    Error when trying to publish ConverterWeb demo project from local dev machine CE 7.2 Netweaver Developer Studio  to server CE 7.2 AS Java was:
    Could not retrieve deployment system configuration for CE1. Please check if the system is running.
    [ERROR: 7/10/10 10:58 PM /userOut/daView_category (eclipse.UserOutLocation)
    Thread[Thread-22,5,main]]
    Issue is a firewall problem.  Solution  is:
    1) remove default SAP AS Java from NW Developer Studio (Windows -> Preferences -> SAP AS Java
    2) shutdown NWDS
    3) open ports 50113 (port for instance 1), 50013 (port for instance 0), 50004 (deploy port) and 5000 (http for NWASJAVA) on the AS Java server.
    4) open NWDS
    5) add SAP AS Java in NWDS (Windows -> Preferences -> SAP AS Java: host - 192.168.1.16, instance - 1, Domain - Default
    6) add SAP AS Java in NWDS (Windows -> Preferences -> SAP AS Java: host - 192.168.1.16, instance - 0, Domain - Default
    7) publish ear.
    8) navigate to: http://192.168.1.16:50000/ConverterWeb/
    obviously you'll need to replace the internal ip with the ip of your server.
    I think this firewall info is somewhere in the docs.
    Edited by: adamtarshis on Jul 11, 2010 8:16 AM

  • Office 2013 ODT The operating system is not presently configured to run this application

    hi!
    We have RDS 2012 R2 setup up and running with session host, connection broker, rd gateway and rd web. AS office 2013 can be deployed using APP-V 5 SP2, we have created .appv pkg using ODT as mentioned in this
    guide . It was working fine for 2 days and then suddenly we started to get error popup window saying
    "The operating system is not presently configured to run this application" . We are receiving this error on Session host server(win 2k12 r2) which is App-V 5 sp2 client, when we try to open any office 2013 app.
    And If check on App-v server which is also a publishing server. In event viewer i see this log entry.
    Log Name:      Microsoft-AppV-Server-Publishing/Admin
    Source:        Microsoft-AppV-Server-Publishing
    Event ID:      215
    Level:         Error
    Description:
    The request URL doesn't contain the query string for the client OS.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-AppV-Server-Publishing" Guid="{825C7963-9E32-4E3B-B74A-DF2CC3B6822B}" />
        <Execution ProcessID="3092" ThreadID="5176" />
        <Channel>Microsoft-AppV-Server-Publishing/Admin</Channel>
     </Event>
    SaM

    We have the same issue. All other applications seem to work fine.
    App-V 5.0 SP1 with hotfix package 2 installed on the App-V Management/Publishing server. We only use Windows Server 2012 RDS instead of R2. On the RDS servers, App-V 5.0 SP2 is installed. We use User Profile Disks and also used the ODT for Office
    2013.
    I our case it worked for a few hours. We didn't change anything (no updates of other things) other than having a few users try to login with different accounts to test the application. Reinstalling the client doesn't work and we also tried to removed
    all AppVClientPackages and then clear the cache from locations like:
    %LOCALAPPDATA%\Microsoft\AppV\Client\VFS
    %APPDATA%\Microsoft\AppV\Client\VFS
    C:\ProgramData\App-V
    I'll post a solution if I find one.

  • Trying to download icloud control panel - only getting so far.  Got message: The installer encountered errors before iCloud Control Panel 2.1.2 could be configured.  Your system has not been modified.  To retry these operations at ltr time, pls run again.

    First time on here... so not sure if doing correctly.
    I'm tryng to download icloud control panel to my PC (have Windows 7 - so should be ok).  I only get so far - 2 times I've tried it.  Keep getting message:
    The installer encountered errors before iCloud Control Panel 2.1.2 could be configured.
    Your system has not been modified. To retry these operations at a later time, please run the installer again.
    huh?

    As I mentioned before you need to start the iTunes installation, then do NOT allow it to complete. In other words go all the way to the point that the installer extract the installation files, then STOP right there.
    Now look for the temp folder and the files I mentioned in my initial posting. If you don't find the temp folder it may be because you have "Do not show hidden files and folder" selected under "View Tab" in the "Folder Options". You may need to unselec it. If you don't know about hidden files and folders in Windows XP take a look here: http://txpress.blogspot.com/2007/05/show-hidden-filesfolders-in-windows.html
    Another possibility is that you may have a different path for your temp folders. To find out where you temp folders are located please do the following:
    - Right click on "my computer"
    - Select the "Advanced" tab
    - Click on "Environment Variables"
    Then look for the path for both variables "TEMP" and "TMP" take note of the path and check them out.
    Or you may just go to a DOS Prompt and type the following commands:
    1 - %temp% and hit enter
    2 - %tmp% and hit enter
    to both of these commands you will get a reply such as:
    'c:\temp' is not recognized as an internal or external command, operable program or bath files.
    So by looking at the reply you can see that my temp folder is c:\temp
    The above is the temp folder on my machine which I've customized to my own use. Your machine may be different.
    I suggest you check for the iTunes temp folder inside both your temp folders locations "TEMP" and "TMP" as they may be in different locations.
    IMPORTANT NOTE: If you allow the iTunes installation to complete you will NOT SEE the iTunes temp folder and files because it will be deleted as soon as iTunes processes the installation.
    Hope it helps.

  • HT1926 After installing the lates version of iTunes, a bubble pops up and says, "iTunes installation complete, Error occured during installation before iTunes could be configured. Your system has not been modified.." How do I correct this?

    After installing the lates version of itunes on my Sony Vio, a bubble pops up which says:
    iTunes installation complete, ERROR occured during installation before iTunes could be configured. Your system has not been modified. To complete the installation process, run the installation again.
    I did this, but this bubble keeps appearing. What do I need to do?

    Hello there, glenkram.
    The following article outlines great steps to try for troubleshooting your very issue:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I can not make a "Automated Installation of the Introscope Agent" (Managed System Configuration, p.7)

    I can not make a "Byte Code Adapter Installation"
    When I open meets both paragraphs in step Managed System Configuration is somewhat obscure situations that do not allow the automatic configuration Introscope agent and Introscope Manager
    Please help to resolve a number of questions that might help me complete the setup :
    1. Why has the status of Enterprise Manager : <No Enterprise Manager configured> ( see picture)
    I set up Enterprise Manager in accordance with the installation instructions and complied with all the setting items . Since without any configuration can be associated with the appearance of this status ?
    2 . Why Server Node is empty detail settings ?
    JDK Location: 
    Enterprise Manager Host: 
    Enterprise Manager Port: 
    Introscope Agent Name: 
    Introscope Agent Profile: 
    Autoprobe Directives: 
    Wily Version: 
    Introscope Agent Version: 
    Introscope Agent Log Location:
    3 . What a mistake ($ MC: DIAG_WILY_MSG: 032 : L), which appears when I click configuration "Configure Introscope Agent Setup ...", and what it can be linked ? ( see picture )
    And the last question , which is also linked to the process of automatic configuration and refers to a phrase from the instruction (Introscope Version 9
    Installation Guide For SAP July 2012) points out "Automated Installation of the Introscope Agent via SMD"
    there is such an item:
    2 . Deploy ISAGENTJ5 *. SCA which is the Introscope Java Agent 9 with SDM to Solution Manager. You may need to deploy also ISAGENT *. SCA which is Introscope Java Agent 8.
    However, nowhere does it say where exactly ( on what the absolute path ) I must perform unloading and then what to do with this discharge

    The problem was resolved a small manipulation - on stage Basic Configuration,
    point 3 "Configure CA Introscope"
    I forgot to add to the list of CA Introscope Enterprise Managers link to my manager.
    Thus it is necessary to take into account that the path should be correct (usually for linux - /usr/sap/ccms/apmintroscope) and the directory should be applied appropriate privileges.
    Then in paragraph "Byte Code Adapter Installation" - there are all the necessary data, and it starts to work correctly

  • System Configurator is not working for R&A repository upgrade

    Hello All,
    Can someone give us some direction on this ?
    We are attempting to configure R&A database using upgrade from 9.3.3 option and providing the database connection details. On the next screen, the path of the RM directory provided is a unc path: \\server\RM1
    UNC path provided as this is a clustered environment.
    \\hyp11webt1/RM1 points to apps\Oracle\Middleware\user_projects\epmsystem1\RM1 which the user has read/write access.
    The user account running the EPM system configurator is the same user that installed EPM on the windows server.
    The Config tool hangs when trying to configure the R&A database.
    We ran the configuration utility at 2:24 am.
    The configtool.log contains the following entries:
    [2012-03-23T02:26:51.930-04:00] [EPMCFG] [TRACE] [EPMCFG-05922] [oracle.EPMCFG] [tid: 19] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.install.sw.SoftwareRegistry] Adding Hyperion Home entry...
    [2012-03-23T02:26:51.930-04:00] [EPMINS] [NOTIFICATION] [EPMINS-00006] [oracle.EPMINS] [tid: 19] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.wizard.Wizard] Wizard state is: SummaryState
    [2012-03-23T02:26:57.290-04:00] [EPMINS] [TRACE] [EPMINS-00015] [oracle.EPMINS] [tid: 11] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.wizard.AbstractWizardAction] Invoked action: navigation.next
    [2012-03-23T02:26:57.290-04:00] [EPMINS] [NOTIFICATION] [EPMINS-00006] [oracle.EPMINS] [tid: 20] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.wizard.Wizard] Wizard state is: RunnAllTasksState
    [2012-03-23T02:26:57.399-04:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01000] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RunAllTasks]
    [2012-03-23T02:26:57.399-04:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01000] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RunAllTasks]
    [2012-03-23T02:26:57.461-04:00] [EPMCMN] [NOTIFICATION] [EPMCMN-01001] [oracle.EPMCMN] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.install.log.StdStreamsCaptureUtil] Trying to create log files for stdout/stderr in directory: D:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\config
    [2012-03-23T02:26:57.461-04:00] [EPMCMN] [NOTIFICATION] [EPMCMN-01001] [oracle.EPMCMN] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.install.log.LoggedOutputStream] Trying to set logStream..
    [2012-03-23T02:26:57.461-04:00] [EPMCMN] [NOTIFICATION] [EPMCMN-01001] [oracle.EPMCMN] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.install.log.DeferredOutputStream] Trying to set backingStream..
    [2012-03-23T02:26:57.461-04:00] [EPMCMN] [TRACE] [EPMCMN-01001] [oracle.EPMCMN] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.install.log.DeferredOutputStream] Wrote buffered data.
    [2012-03-23T02:26:57.461-04:00] [EPMCMN] [TRACE] [EPMCMN-01001] [oracle.EPMCMN] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.install.log.DeferredOutputStream] Flushed backingStream.
    [2012-03-23T02:26:57.461-04:00] [EPMCMN] [NOTIFICATION] [EPMCMN-01001] [oracle.EPMCMN] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.install.log.DeferredOutputStream] Setting backingStream: succeeded.
    [2012-03-23T02:26:57.461-04:00] [EPMCMN] [NOTIFICATION] [EPMCMN-01001] [oracle.EPMCMN] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.install.log.LoggedOutputStream] Setting logStream: succeeded.
    [2012-03-23T02:26:57.461-04:00] [EPMCMN] [NOTIFICATION] [EPMCMN-01001] [oracle.EPMCMN] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.install.log.LoggedOutputStream] Trying to set logStream..
    [2012-03-23T02:26:57.461-04:00] [EPMCMN] [NOTIFICATION] [EPMCMN-01001] [oracle.EPMCMN] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.install.log.DeferredOutputStream] Trying to set backingStream..
    [2012-03-23T02:26:57.461-04:00] [EPMCMN] [TRACE] [EPMCMN-01001] [oracle.EPMCMN] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.install.log.DeferredOutputStream] Wrote buffered data.
    [2012-03-23T02:26:57.461-04:00] [EPMCMN] [TRACE] [EPMCMN-01001] [oracle.EPMCMN] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.install.log.DeferredOutputStream] Flushed backingStream.
    [2012-03-23T02:26:57.461-04:00] [EPMCMN] [NOTIFICATION] [EPMCMN-01001] [oracle.EPMCMN] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.install.log.DeferredOutputStream] Setting backingStream: succeeded.
    [2012-03-23T02:26:57.461-04:00] [EPMCMN] [NOTIFICATION] [EPMCMN-01001] [oracle.EPMCMN] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.install.log.LoggedOutputStream] Setting logStream: succeeded.
    [2012-03-23T02:26:57.461-04:00] [EPMCMN] [NOTIFICATION] [EPMCMN-01001] [oracle.EPMCMN] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.install.log.StdStreamsCaptureUtil] Created log files for stdout/stderr.
    [2012-03-23T02:26:57.461-04:00] [EPMCMN] [NOTIFICATION] [EPMCMN-01001] [oracle.EPMCMN] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.install.log.StdStreamsCaptureUtil] stdoutLogLocation = D:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\config\configTool-stdout.log
    [2012-03-23T02:26:57.461-04:00] [EPMCMN] [NOTIFICATION] [EPMCMN-01001] [oracle.EPMCMN] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.install.log.StdStreamsCaptureUtil] stderrLogLocation = D:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\config\configTool-stderr.log
    [2012-03-23T02:26:57.461-04:00] [EPMCFG] [TRACE] [EPMCFG-02015] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RunAllTasks] Creating product component(s) in the HIT Registry (if not created yet) for all selected product(s)...
    [2012-03-23T02:26:57.493-04:00] [EPMCFG] [TRACE] [EPMCFG-01321] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.cis.config.ConfigRegistryUtils] Creating product component: component type = SHARED_SERVICES_PRODUCT
    [2012-03-23T02:26:57.508-04:00] [EPMCFG] [TRACE] [EPMCFG-01322] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.cis.config.ConfigRegistryUtils] Product component already exists in the registry: component type = SHARED_SERVICES_PRODUCT
    [2012-03-23T02:26:57.508-04:00] [EPMCFG] [TRACE] [EPMCFG-01321] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.cis.config.ConfigRegistryUtils] Creating product component: component type = RA_PRODUCT
    [2012-03-23T02:26:57.508-04:00] [EPMCFG] [TRACE] [EPMCFG-01322] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.cis.config.ConfigRegistryUtils] Product component already exists in the registry: component type = RA_PRODUCT
    [2012-03-23T02:26:57.508-04:00] [EPMCFG] [TRACE] [EPMCFG-01321] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.cis.config.ConfigRegistryUtils] Creating product component: component type = FINANCIAL_REPORTING_PRODUCT
    [2012-03-23T02:26:57.508-04:00] [EPMCFG] [TRACE] [EPMCFG-01322] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.cis.config.ConfigRegistryUtils] Product component already exists in the registry: component type = FINANCIAL_REPORTING_PRODUCT
    [2012-03-23T02:26:57.524-04:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RunAllTasks] trace: Selected product is Foundation:Foundation
    [2012-03-23T02:26:57.524-04:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.FusionUtils] trace: component name is foundation1
    [2012-03-23T02:26:57.524-04:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.FusionUtils] trace: component name is foundation1
    [2012-03-23T02:26:57.524-04:00] [EPMCFG] [TRACE] [EPMCFG-02072] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.provision.HITProvisionFactory] Entering getOracleComponentArgs
    [2012-03-23T02:26:57.524-04:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.FusionUtils] trace: Registration file for Foundation is missing
    [2012-03-23T02:26:57.524-04:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.FusionUtils] trace: Component jar file null does not exist
    [2012-03-23T02:26:57.524-04:00] [EPMCFG] [TRACE] [EPMCFG-02074] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.provision.HITProvisionFactory] Calling getArgs
    [2012-03-23T02:26:57.524-04:00] [EPMCFG] [TRACE] [EPMCFG-02072] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.OracleComponentArgs] Entering getArgs
    [2012-03-23T02:26:57.524-04:00] [EPMCFG] [TRACE] [EPMCFG-02074] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.OracleComponentArgs] Calling onGetArgs
    [2012-03-23T02:26:57.524-04:00] [EPMCFG] [TRACE] [EPMCFG-02073] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.OracleComponentArgs] Exiting getArgs
    [2012-03-23T02:26:57.524-04:00] [EPMCFG] [TRACE] [EPMCFG-02073] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.provision.HITProvisionFactory] Exiting getOracleComponentArgs
    [2012-03-23T02:26:57.524-04:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.FusionUtils] trace: Path for instance name is D:\Oracle\Middleware\user_projects\epmsystem1 vs path returned is epmsystem1
    [2012-03-23T02:26:59.555-04:00] [EPMCFG] [TRACE] [EPMCFG-02072] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.provision.HITProvisionFactory] Entering getOracleComponentArgs
    [2012-03-23T02:26:59.555-04:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.FusionUtils] trace: Registration file for Foundation is missing
    [2012-03-23T02:26:59.555-04:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.FusionUtils] trace: Component jar file null does not exist
    [2012-03-23T02:26:59.555-04:00] [EPMCFG] [TRACE] [EPMCFG-02074] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.provision.HITProvisionFactory] Calling getArgs
    [2012-03-23T02:26:59.555-04:00] [EPMCFG] [TRACE] [EPMCFG-02072] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.OracleComponentArgs] Entering getArgs
    [2012-03-23T02:26:59.555-04:00] [EPMCFG] [TRACE] [EPMCFG-02074] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.OracleComponentArgs] Calling onGetArgs
    [2012-03-23T02:26:59.555-04:00] [EPMCFG] [TRACE] [EPMCFG-02073] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.OracleComponentArgs] Exiting getArgs
    [2012-03-23T02:26:59.555-04:00] [EPMCFG] [TRACE] [EPMCFG-02073] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.provision.HITProvisionFactory] Exiting getOracleComponentArgs
    [2012-03-23T02:26:59.555-04:00] [EPMCFG] [TRACE] [EPMCFG-02072] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.provision.HITProvisionFactory] Entering getOracleComponentArgs
    [2012-03-23T02:26:59.555-04:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.FusionUtils] trace: Registration file for Foundation is missing
    [2012-03-23T02:26:59.555-04:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.FusionUtils] trace: Component jar file null does not exist
    [2012-03-23T02:26:59.555-04:00] [EPMCFG] [TRACE] [EPMCFG-02074] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.provision.HITProvisionFactory] Calling getArgs
    [2012-03-23T02:26:59.555-04:00] [EPMCFG] [TRACE] [EPMCFG-02072] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.OracleComponentArgs] Entering getArgs
    [2012-03-23T02:26:59.555-04:00] [EPMCFG] [TRACE] [EPMCFG-02074] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.OracleComponentArgs] Calling onGetArgs
    [2012-03-23T02:26:59.555-04:00] [EPMCFG] [TRACE] [EPMCFG-02073] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.OracleComponentArgs] Exiting getArgs
    [2012-03-23T02:26:59.555-04:00] [EPMCFG] [TRACE] [EPMCFG-02073] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.provision.HITProvisionFactory] Exiting getOracleComponentArgs
    [2012-03-23T02:26:59.555-04:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.FusionUtils] trace: Path for instance name is D:\Oracle\Middleware\user_projects\epmsystem1 vs path returned is epmsystem1
    [2012-03-23T02:27:01.743-04:00] [EPMCFG] [WARNING] [EPMCFG-01001] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.FusionComponent] trace: The component type 'Foundation' is not supported. Valid component types are: [EssbaseServer, OCM, OHS, WebCache]
    [2012-03-23T02:27:01.743-04:00] [EPMCFG] [TRACE] [EPMCFG-02147] [oracle.EPMCFG] [tid: 21] [ecid: 0000JOyF8o76eLL6yRR_6G1FR1RS000004,0] [SRC_CLASS: com.hyperion.hit.fusion.FusionComponent] Oracle Instance already exists at D:\Oracle\Middleware\user_projects\epmsystem1.

    Try the following:
    1.-Set your test motor to encoder feedback instead of analog feedback.
    2.-Load a velocity move on the axis for the test motor.
    3.-Set the following error limit on you axis to 0 (disable following error).
    4.-Use the load torque limit function to limit the amount of torque the 73xx PID loop will generate,this value is in volts, so you will need to do a correlation between the voltage output from the controller and the torque reported by your torque cell.
    5.- Start the load motor.
    6.-Engage the cluch.
    7.-Start the velocity move on the test motor, you will see the torque ramp up to the torque limit.
    8.-Call the load torque limit function on the fly to vary the torque setpoint to where you want it.

  • Cannot see CCMS Monitor Templates - System is not configured

    I just finished installing SAP Netweaver Trial, and I have been able to login using the SAP* and DDIC accounts.
    I can see the standard tree via the SAP client GUI.
    I am trying to take a look at the CCMS Monitor Sets, and I can see the standard collection of "Entire System", "Performance Overview", etc. all fine.
    However, when I double-click to load any of the monitors, I see nothing inside.
    No sub-trees, nothing.
    I enabled "Display error nodes" and see a node that says
    "NSP   : System is not configured"
    I have tried creating my own user, adding in profiles like SAP_ALL, S_A.System, etc.
    I also notice everytime I access the CCMS Monitor Templates, there is an entry in the Syslog:
    Severity: Warning
    Process Type: D0
    Transaction Code: RZ20
    Client: 001
    User: DDIC
    Message ID: BYE
    Description:
    Database: Invalid parameter ObjTooLar transferred to database interface
    Please let me know if I am missing any components, or if there is something I need to do.
    Thank you.

    Thanks Sunny.
    That thread did indeed helped me to resolve the issue.
    However, the thread did not really provide clear instructions to complete newbies like me.
    For those who also have the same issue, this is what I did:
    1. Execute RZ10 (Edit Profiles) via the SAP client GUI
    2. Click on the menu Utilities - Import profiles - Of active servers
    3. Edit the "Instance Profile" NSP_DVEBMGS00_{Your Computer Name}
    Select Extended Maintenance, and select Change
    4. Change the following two parameters:
    alert/MONI_SEGM_SIZE from 0 to 60000000
    rdisp/autoabaptime from 0 to 300
    5. In the SAP MMC, right-click on NSP and select Restart
    6. After restarting, login and you should be able to see the CCMS Monitor Template nodes

Maybe you are looking for