Project system: error when confirm an activity

Hi Gurus,
I try to confirm an activity ( TC: CJ20N ). I go through "Edit / Activity / Confirm" but I get following message NO VALID CAPACITY FOR FINITE SCHEDULING (mssg Nr. C7 057).
However I already confirmed an activity assigned to the same work center.
Do you have any explanation what why the error message occurs???
What does the indicator relevant for finite scheduling mean?
Please advice!
Thanks

Hi
I think you are using Capacity planning for scheduling activities in PS. Hence check your work center or any reports of your PS/WBS where u can see the available capacity for scheduling your activity.
This is not refferring to the Activity type in controlling, it is referring to the Internal Activity in PS.
Regards,
Suraj

Similar Messages

KP06 Cost Center Budget Planning System error when locking the data records

Hi,
While updating Cost Center Planning system(KP06) its giving the below error:
System error when locking the data records.
Message no. KI502
Diagnosis
The lock to protect the data records being processed could not be set. The
probable reason for this is that the SAP locking table is full and no more
entries can be added.
Procedure
Inform your system administrator immediately
No planning data has been changed
Message no. K8038
Diagnosis
You used Post. While preparing the data for posting, the SAP System
determined that no changes were made in the available databank values.
System Response
A posting activity price is not necessary
Please help me how can we rectify the above error..
Thanks
VS Rao

Hi,
check the locking entries (t-code SM12).
http://help.sap.com/saphelp_erp2004/helpdata/en/37/a2e3ae344411d3acb00000e83539c3/frameset.htm
Best regards, Christian

Error in Local Message System: Error when opening an RFC connection Message

Hi Gurus,
We are not able to create support messages in our ECC production system but it can created in Development and Quality. Support message created appears in solution manager system. ECC System displays error message as
Error in Local Message System: Error when opening
an RFC connection Message was Not Created
I have checked RFC connection between ECC and Solution Manager which displays following message
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: partner "local:sapgw00' not reached
Error Details     LOCATION: SAP-Gateway on host local / sapgw05
Error Details     DETAIL: NiPConnect2
Error Details     CALL: connect
Error Details     COMPONENT: NI (network interface)
Error Details     COUNTER: 40142
Error Details     ERROR NUMBER: 10060
Error Details     ERROR TEXT: WSAETIMEDOUT: Connection timed out
Error Details     MODULE: nixxi.cpp
Error Details     LINE: 2835
Error Details     RETURN CODE: -10
Error Details     SUBRC: 0
Error Details     RELEASE: 701
Error Details     TIME: Wed Jan 11 23:26:54 2012
Error Details     VERSION: 38
Kindly Help.....

Hi
Based on the instance number of the servers, you can determine the gateway to be used.
IF your ECC instance number is , 01 then gateway would be , sapgw01 (in ECC system)
So check and change the settings accordingly, in the RFC connection. Also check, if this entry sapgw01 is made in /etc/service file. Also check, in transaction smgw for gateway parameters.
Hope this info helps,
~ Raj

Employee Photo Upload Fail - "System error when archiving"

Hi all,
When i am trying upload a photo of an employee in our ESS development portal its working fine. But the issue here is when i am trying to upload the same in testing ESS portal its displaying an error message as "System error when archiving a photo" and i tried to upload the photo in back end also at that time its displaying an error as "HTTP error :401 unauthorized".
Kindly help me to resolve this problem ASAP.
URGENT!!!!!!!
Thanks in advance..!!!

Hi Van,
Thank you for your reply. Finally we found the solution for this. The Issue was that the user CONT_SERVER in SICF(tcode) -> Content Server was locked. We unlocked it , now the photos are uploading successfully...

System error when archiving a photo

Hi,
I can store employee picture successfully in R3 (T-Code: OAOH). I can
see it there too by Extract->Dispaly all facsimiles in PA30 for that
employee.
But I can't see the picture from ESS ,only a frame is coming. The URL
of the picture is <R3 hostname>:8000. But the ITS service i.e content
server is <R3 hostname>:8001. If i give 8001 then the picture is
comming. I can't store any picture from ESS ..."System error when
archiving a photo".
I can delete the picture in TOAHR table from the ESS by removing the
employee pic though i can't see it.
We have 2 cluster instances...1) sapprddb 0 (message server is under this)
2) sapprdapp 1 (application server r3)
Please help...
Thanks and Regards,
Sekhar

Hi,
Thanks for ur reply. But I have already gone through the steps. I can see the picture from R3 and store it there. But the problem is in ESS (portal). I can't store it from ESS as the address it going to store is <R3 hostname>:8000/fp/bc/contentserver........The actual should be <R3 hostname>:8001/fp/bc/contentserver........
Plz suggest me where from it take the value 8001 in portal for employee pic. For all other T-iview working fine. Telnet to 8000 is not possible, but 8001 is ok.
Thanks,
Sekhar

'System Error' when trying to save Form Manager Registry Settings

Hi,
trying to save changes made in the form manager registry settings [Home > Services > Adobe LiveCycle Form Manager > Registry Settings (http://localhost:8080/FormManagerAdmin/registry-cfg-load)], I get an error, which reads:
> System Error
>
The request could not be processed. Please retry the operation. If the problem persists, please contact your system administrator.
Has anyone had this error as well?
The system runs fine apart from the jboss log files being crammed with the well-known and pretty annoying
SpyJMSException.
Does anyone have an idea how to apply changes to the form manager registry settings, if the web ui does not work? Where are the 'form manager registry settings' being stored? Maybe I succeed in changing the settings manually at least without having to re-install Livecycle...
Regards,
Steve

We are using JBoss 3.2.5.
Weirdly, last week a collegue of mine was able to save the registry changes. This week, both of us get the 'System error' when trying to save changes. Even using a default Administrator account, we were unable to save changes.
Is there any other way apart from the LiveCycle web UI to change the registry settings without having to re-install the server? Where are these values stored?

I have a system error when trying to open my itunes on my laptop. Should I unistall and reinstall itunes?

i have a system error when trying to open my itunes on my laptop. Should I unistall and reinstall itunes?

The first error comes when i open my laptop:
APSDeamon.exe - System Error
The program cannot start because MSVCR80.dll is missing from your computer. Try reinstalling....
when I try to open Itunes, it says:
iTunes.exe
iTunes was no installed correclty, please re-install itunes
Thanks!
Annabel

System error when trying to open Ngage?

It was working up until today. Now I just get "system error" when I try opening it. I have tried installing n gage again and even deleting n gage but still the same problem.
Any ideas?

04-Nov-2008 11:01 PM
liam182 wrote:
lucky just found answer in time was about to re install phone memory. All because of one little router character
see here
http://zomgitscj.blogspot.com/2008/11/n-gage-system-error.html
Good to know my blog was of help to you
Mobile News, Reviews and More : http://UnleashThePhones.com/

System error when archiving a photo/file

Hi Experts,
here we are using EP 7, and MAXDB 7 as backend and SAP content server AIX 5.3, apache 1.3, when we are checking in SAP content server srkp09, we tested all 3 possibilities like single test, multiple test, and runtime test all the tests are successful, as part of portal side for a employees chnage own data we are trying to attach a photo ->Review and save -> we getting message attachment save to Database. !System error when archiving a photo. please advice how to rectify this problem ? is this is part of content server issue or portal issue.
waiting for your quick help on this
Thanks & Regards
VenkataSurya

Hi,
Thanks for ur reply. But I have already gone through the steps. I can see the picture from R3 and store it there. But the problem is in ESS (portal). I can't store it from ESS as the address it going to store is <R3 hostname>:8000/fp/bc/contentserver........The actual should be <R3 hostname>:8001/fp/bc/contentserver........
Plz suggest me where from it take the value 8001 in portal for employee pic. For all other T-iview working fine. Telnet to 8000 is not possible, but 8001 is ok.
Thanks,
Sekhar

System error when sync e-mail

Hello,
in the menue "Settings - Connectivity - Data transfer - Sync - Options - Synchronise" I get the message "system error" when I want to sync e-mail. The email settings in the sync profile are:
database in phone: ovi
sync e-mail database: ./e-mail/unfiled
Can anybody help.
Txs
Inge

im having the same problem with my new e72..plz help

N85--system error when i open n-gage!

wat shud i do now? just a day back i got n85 and it says system error when i open the n-gage application.. so i deleted it!!
now what??
What's Worth Doing, Is Worth Doing Well!
All "N-series" are incredible!

the problem still persists... can anyone has the relevant experience to help in this matter.. i emailed nokia, their solution did not work too...
What's Worth Doing, Is Worth Doing Well!
All "N-series" are incredible!

(project system) do book confirmation amount as a actual cost

HI all
it is possible in project system when i confirm my activity then it does not book actual cost to my network activity.
because i need to show this confirm amount as only for information purpose....my clint requirement.
thanks

with the material ledger, actual costs are not only used to value the stock at the period end. You also have the possibility to revalue the cost of goods sold with the actual costs of production for the period.
The system takes initial stock, initial value, production of the period, actual costs of production of the period to calculate "cumulative stock of the period" and "cumulative value". The cumulative value per unit is then applied to all consumption of the period (goods sold) and the final stock.
Your only alternative to the material ledger would be to value yout finished goods at V-price, not S-price. The problem with this is that you don't necessarily have all the information about actual costs at the moment your finished product enters stock. For example actual activity prices can only be reasonably calculated per period.
Whether V-price is an option depends on the details of your scenario.
To me material ledger is the right way to value stocks and COGS at actual cost.

PROJECT SYSTEM :error message

When we do technically completed for an activity in PROJECT SYSTEM ,system should give an error message if there are any production order for which materials are yet to be received. Can any one tell me how to do it.

Hi
The error message says are still some open purchase orders exist for this project.
You have to close all these purchase orders before closing the project.
Use transaction code ME2J and give the input selection parameter : Project id and select Purchase order, selction parameter as open quantties execute the report.All the open PO will be displyed.You have to short close the all open POs.
Similarly check for other documents like open invoice etc.
Regards
Ramakrishna

For 0PS_C02 cube Project System - Dates update rules not activated!!

Hi All,
When we are trying to install update rules from the BI content for PS module for the cube "0PS_C02 Project System - Dates", the
update rules are not activating. under the cube when BI content activation. What is the issue in activating the update rules from BI content. From BI content the available version objects only will be activated i think. Please rectify and resolve the same at the earliest friends.
thanks,
Sakali

Hi,
Try to activate through program RSAU_UPDR_REACTIVATE_ALL.

File system error when trying to connect to a network share

I am trying to set up a BB Curve (9350) to access a network share (Applications/Files/GoTo) and am getting a message "File system error". It does not ask for user/domain/password. I have this working on another BB Curve. When it works, it prompts for User Name, Domain, and Password. Is there a setting on the BES that allows some phones to access the network, but not others?
Thank you.
JerryK

Sometimes the devices can get pushed additional policies on accident basically, I would call the carrier first so you guys don't get charged for support and have them transfer you over to blackberry tech support. If you have access to the server and the device they might be able to figure out whats goin on.

Project system: error when confirm an activity

Similar Messages

Maybe you are looking for