Project System: Plan Version

Anyone know how many plan version can I have in Project System for 1 project in same year?
Edited by: ytai on May 25, 2010 11:20 AM

Hi,
You can define up to 10 versions (0 to 9). Please, search basic SAP material on help.sap.com
Regards,
Eli

Similar Messages

Version 999 Project System Plan Data Issue

I am using transaction CJ9B to copy the Project System related plan data i.e. plan data at the WBS element level from Version 10F, period 1 to 12 in year 2010 to version 999, period 1 to 12 in year 2010. The transaction CJ9B runs successfully in the update mode. But when report CJI4 is executed for version 999, period 1 to 12 in year 2010 then we do not find plan data in sync with version 10F.
I analysed this issue, had a meeting with end user and blanked out target version 999 using source version 9ZR for the year 2010. Then I again copied version 999 from version 10F. Still plan data in version 999 do not exist as they are in version 10F. I have checked the version 999 master data in transaction OKEV. Integrated Planning for SPL, COPA, cost center accounting and business process is active. COPY Allowed is also enabled. Version 999 is unlocked as well.
Hence I am not sure why the copy functionality is not working fine for version 999, period 1 to 12 in year 2010.
Can you please take a look and revert with your opinion so that this issue can be fixed ?
Thanks,
Umesh

Hi,
If you want to copy all the plan date from 10F to 999, then in Txn CJ9B
select the indicator reset and overwrite in target version and execute in test mode.
Regards,

Project system planned quantiy

Hi all
I maintain the unit cost price and quantity at general cost activity master data but problem is that the quantity is not show in any reports. please guide me. is this any configuration problem......
thanks
shabbir

This is related to project system activity(general cost activity) not controlling activity type.
i need report that show the plan quantity that maintain in ps activity master data .....
thanks

Project System - Scheduling Version

Hi,
I have done the project scheduling .Please any one suggest how to maintain the different version of schedule and I need to compare the schedules between two version. Any standard reports are available for schedule comparison.
Thanks
Chandra

Hello Chandra,
I could not find in your description which transaction / report / program / etc. do you use here.
Which steps do you use exactly?
Best regards,
Laszlo

Where does Plan Version field store in SAP project system table?

Hi,
I would like to know where where does Plan Version field store in SAP project system table.
The plan version that I m refering is the Plan Version 1 in the menupath u201COn the Project Info System: Progress Analysis: Initial Screen, Choose Settings > Value display > Plan versionsu201D.
T-Code: CNE5
Thanks.

hi,
try table TKA09
regards

Version in Project System

Hi all,
can anyone explain me the Concept of version in Project System?
And How to get the Version by giving the Project ID as Input

Hi,
SAP PS differentiates between the following versions:
1. Simulation versions
2.Project versions
3. CO plan versions
In SAP PS simulation versions are modifiable versions of projects. You create a simulation version in the quotation phase, for example, if an operative project does not yet exist or if you want to plan other alternatives to an existing operative project or subproject.
Project versions are snapshots of a project at a specific point and are used for documenting the progress of a project over time. Both quantities and values are stored in versions. Project versions are created either manually or automatically when a status changes.
CO planning versions are used to plan costs and revenues. Using CO planning versions you can define various cost plans for a project, for example, an "optimistic" and a "pessimistic" plan. You can copy values from one version to another. You can change planned values manually in every version. The costed values are retained.
Muzamil

Project Systems Business Content - Residual Order Plan

Hi all,
I a issue which I hope someone can help me with:
I am lodading data into cube 0PS_C08 and then into 0PS_C04 as per the BC. When I view the BC restricted key figure "residual order plan" i get nothing (blank).
I look in R/3 I have values for residual order plan. I have looked at the Help on SAP and they say there is some config that needs to be done in SPRO. I dont really understand what config needs to be done can someone help?
Many thanks,
Leo

Hi,
We are searching for project versions(project systems) business content :
Base tables :
VSAFVC_CN     Version: Operation in order
VSAFVV_CN     Version: Quantities/Dates/Values in order operation
VSAUFK_CN     Version: Order master data
VSEBAN_CN     Version: Purchase requisition
VSEBKN_CN     Version: Purchase requisition account assignment
VSJEST_CN     Version: Individual status per object
VSJSTO_CN     Version: Information on status object
VSKBED_CN     Version: Capacity requirement records
VSKBEZ_CN     Version: Additional data for table KBED (ind. capacities)
VSKBKO_CN     Version: Capacity requirements header for an order
VSKOPF     Version: Header - general data for a version -
VSKPER_CN     Version: Workforce Planning
VSMLST_CN     Version: Milestone
VSNPTX_CN     Version: PS texts (network)
VSPRHI_CN     Version: WBS, edges (hierarchy pointer)
VSPROJ_CN     Version: Project definition
VSPRPS_CN     Version: WBS element (work breakdown struc. ele.) mast. data
VSPRTE_CN     Version: Scheduling data for project item
VSPRTX_CN     Version: PS texts (WBS)
VSPSTX_CN     Version: PS texts (header)
VSRPSCO_CN     Version: Cumulation table for project reporting
VSSTEU     Version: Control table - one entry per version object -
I didn't find any relevent business content for above tables.
If anybody extracted these ,please let me know where and how they extracted.I will assign points.
Thank you,
GSR

CN41, CNS41 don't work on planning version 001 and project version

Iu2019ve an issue:
Iu2019m working on release ECC 6.0.
I did the overall planning, costs and revenues (structure planning on Project), then I saved data on project version and on planning version 001.
When I run the CN41 or CNS41 with plan data in plan version 001 (costs and revenues) and plan data (costs and revenues) in project version, the report doesnu2019t let me see the plan data in the Project version column neither in the planned cost/rev. 001 column.
The hot patches on my system is on SAPKH60013.
Any one could help me?
Pierluigi.

FYI for others searching on this issue, there are a few OSS Notes that explain this:
Note 148971 - Planned values in Project Information System
"4. The Planned costs column in the structure overview and the planning board corresponds to the Overall planned costs column in the hierarchy reports if you implemented Note 106823..
If you implemented Note 106823 (included in the standard system as of Release 4.0B), only the annual values of the WBS elements, networks and orders are displayed. Column 'Planned costs' in the structure overview and planning board corresponds to the 'Total of year'. If this effect is not desired, Note 106823 has to be removed or should not have been implemented beforehand. In addition, if you implement Note 127521, you must remove the changes in object REPS LHFPLU08 of Note 127521 (this applies to Release 30D - 31I). Any other changes can remain."

"no active plan version exists" while adding system in partner profile

Hi,
i am getting "no active plan version exists" while adding logical system in partner profile. while duble click on this it showing "set active plan version".
Can anyone answer me how to do the set active plan version. I asked my functional team and they didnt know how to set it.
Thanks,
Gowthaman.

Thanks Sonia,
in OOAP i could not able to edit so i maintained plan version in OOPV and in sm30 in table T77S0 maintained PLOGI group.
Now i am getting different error while creating partner profile in we20..
*Object type US, ID CENTRALADMIN unknown (please observe upper/lower case)*
    *Message no. E0624*
*Diagnosis*
    *Object CENTRALADMIN of type US is not known in the system.*
*Procedure*
    *Enter a valid object and check the type.*
    *Make sure upper case and lower case are used correctly.*

BAPI project systems actuals versus planned

Hello,
I am looking for a BAPI/Idoc for displaying planned versus actuals similar to report s_alr_87013532. I have looked everywhere but cannot find anything. Also checked in OPENPS if there where any BAPI's for getting the information, but also not.
Can anyone help me?
Kind regards,
Nick

Hi
Try this
SAP Project System - A ready Reference ( Part 2 )
Thanks
S.Murali

Planning Profile for Project System

Dear All,
In planning Profile (T Code OPSB) for Project System we can find RElem.f.billing plan ..field, in this field which cost element we have to assign wheather it is sales revenue or secondary cost element cat.31 or else..plz adives me..
Thanks and regards

Mr. Sridhar,
Thanks for ur reply, here my querry is, i have types of sales revenues like domestic, export, industrial etc.. there is only option is there to maintain revenue cost element, so which revenue cost element i have to maintain in planning profile.
Regards
Ramesh

Cutover plan on Project systems

Hi Friends
Can any one help me to prepare Project systems cutover plan, if you have any cutover plan on Project systems could you please pass me to
harikrishna underscore sd at yahoo dot com
Our requirement is we are going to stop the existing client and we are creating a new client and will continue with the same. So how we should update the projects of various stages in the new client and how to close in the existing client.
Regards,
Hari

Hi,
Plz refer this links it may help u.
http://sapdocs.info/2008/09/22/sap-go-live-strategy/
CUTOVER
http://www.sap-img.com/sap-implementation.htm
Cutovers
Different types of testing in a SAP Implementation project
Regards
Chandra

Plan hours in Project System

Hi SAP Gurus,
In project system as i can plan my cost, can i plan my hours?? If yes how?? where in SAP?
I am in service industry and my billing happen on hours..
Please help, its urgent
Pritam

Hello Smile,
Yes, You can plan your man hours in project many ways
1. Plan manhours in network activities using work centers
2. Plan manhours in network activities using workforce planning ( integration with HR Module)
3. In some companies, many departments work on a project and they plan manhours on cost centers and not on Project. In other words, many department provide services to projects.
Here I will assume that you want to plan manhours in Project without workforce planning.
The following are the pre requisite for planning man hours in project network activities.
1. Work center ( may be person or group of persons, machine or group of machines. Workcenter reflects skills and capacities in cost center)
2. Work or duration ( based on the calculation key either one is calculated)
3. Activity type ( Type of service)
Behind the screen,You have to have a cost center attached to the workcenter (CNR1/CNR2) and activity type. Combination of cost center and activity type will decide the rates. Use transaction KP26 to enter the rates.Activity prices are valid for a certain period of time only. They are entered for either months or a year.
The budget for the cost center should be used as a base to calculate the hourly rate for each activity type.
When you enter a work in the network activity, system calculates the costs for the manhours.
Eg: You create engineer as workcenter. He is asked to go to site and did installation of equipments.
Attach workcenter ABCD to network activity, activity type "Engineer" and work 100 hrs.
If the engineer rate is $50 per hour given in KP26.
Then the planned cost for manhours is 100 X $50 = $500
The same engineer can provide supervison service at your workshop. For that, his rate may be $20/hour. If you plan for supervison then the planned costs will be $200
FATMAN

Overhead planning in Project System- Result Analysis

Hi .. I want to plann over head for project system. Please suggest me the procedure.

Hi .. I want to plann over head for project system. Please suggest me the procedure.

ROLES OWNERSHIP in Project Systems

We are implementing Project Systems (PS) 4.7 version. Though, most transactions are accounting based there are several project-related transaction codes (T-Codes) that are being utilized by other business areas such as Plant Maintenance, RD&E and other business areas project managers.
In order to have proper control over such T-Codes usage in conjunction with Roles, we need to <b>define ownership of such roles</b>. Though Finance Department may be willing to own these roles, I will appreciate if you could enlighten us with the (1) best practice (2) protocol as to who SHOULD OWN the ROLES? Plant Maintenance, FI/CO and MM are some of the modules already implemented. We also plan to implement cProject, cFolder, xRPM with virtually the same go-live date (3 months later). Please keep our SAP environment in mind when responding to this question. Very much appreciate your thought and response in advance.

Hello
Check this link on Project Planning Board.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/4c/225cff46e611d189470000e829fbbd/frameset.htm
Reg
*assign points if useful

Project System: Plan Version

Similar Messages

Maybe you are looking for