Project thumbnails not showing properly

While nearing completion of my project I published the iMovie file to the Media Browser so I could access in GarageBand and work on the soundtrack. When I returned to iMovie to edit it further I noticed none of the thumbnails were showing. The project seemed intact. I rolled over each clip and everything worked as it should.
I began to edit the project and was prompted that I would have to re-publish the project again. This is as it should be. However, once I began editing the clips again all the thumbnails changed from blank to the image of the photo I just imported from iPhoto. All of them changed.
Is there anyway to reset the cache or something like this in iMovie 09? Something that will allow me to see the proper thumbnails. Although I can continue to work on the project, not knowing where my edits are makes it difficult.

Could you try disabling graphics hardware acceleration? Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches with some graphic cards/drivers.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
orange Firefox button ''or'' classic Tools menu > Options > Advanced
On the "General" mini-tab, uncheck the box for "Use hardware acceleration when available"
Does that make any difference?

Similar Messages

Thumbnails not orientating properly after new OS update

Many of my recent thumbnails (last 4-5 imports/projects) have lost their proper orientation after the update. Most, though not all, of the "landscape" orientation now show up in the thumbnails at the bottom of the screen as rotated 90-degrees, some left, and some right. The individual image in the viewer is correct, but the thumbnails are not. I tried reprocessing, but no effect. I also have some portrait orientation images showing up as landscapes in the thumbnails, but showing properly in the large image.
If I rotate the thumbnail to the correct orientation, the large image becomes wrong orientation.
Anyone else having this problem? The images are from a Nikon D700, and have been fine up until this update.

Hi, had the same issue.
Open all the stacks in the project select all and re-create the thumnails, that worked for me

Thai characters not showing properly

Hi,
When creating a product catalog in thai language the characters do not show properly. The characters have small aspects attached to them that hover above as you can see here http://www.gte-premium.com but when editing in Indesign the small aspects that are meant to hover above overlap the portion of the character below and are not aligned left to right properly.
I have tried every thai-friendly font I can find but this does not fix the problem, how can I amend this?
Thanks in advance

If you're using a well-made font, you can probably get the tone marks to behave by turning on the World-Ready Composer. It's exposed in InDesign CC and CS6, in the Paragraph menu I think, but if you're using an earlier version of InDesign it's a hidden feature that you would need to use a script or a plugin to turn on.

Once project is finished the project should not show in Dashboard

HI All,
In my cProject my project status in completed last month.
once my project is completed ,my project should not show in cProject portal in starting page under projects dashboard.
how to make once completed project not apper in project dashboard.
Thank,
Kumar reddy.

You can create a view in the project dashboard and filter out the statuses completed or canceled. User can always create local views, if needed for all users you can create a global view, call it something like "Active Projects" and set it as default.
By the way, which version of PPM are you using?
Edited by: Lashan Wanigatunga on Aug 1, 2011 1:22 PM

Anychart labels not showing properly..

Hi all...
Anychart Version: 5.1.2
I have a bar simple bar chart which calculates surgeons and their percentage of surgeries.
x axis: surgeon name (labels rotated to 90 degrees)
y axis: percentage
If i am just showing 10 surgeons it is showing properly.
But if am trying to show all the surgeons (around 100 surgeons on x axis).
The Flash chart x axis labels are not showing properly
In this thread..Austin suggested to increase the width of the chart
APEX Flash Chart labels not displaying
If i increase the width the labels are showing properly. But the chart looks so ugly with huge width. Is there any other way to show the labels properly
without incresing the chart width
In Mozilla filefox i checked the XML returned. In the XML it is showing the labels but in the chart
it is not showing up.
Sample X axis..
The X axis is looking like this..
s s
u u
r r
g g
e e
o o
n n
1 3
It is not showing the "surgeon 2" which is between 1 and 2
This is custom XML that i am using..
<anychart>
<margin all="1"/>
<settings>
<animation enabled="true"/>
</settings>
<charts>
<chart use_anychart3_data_model="true" use_sets_colors="false">
<chart_settings>
<title enabled="True" vertical_padding="30">
<font bold="True" size="15" />
<text>Death by Surgeon</text>
</title>
<subtitle enabled="True">
<background enabled="false" />
<font bold="False" size="15" />
<text>Arranged by Increasing Annual Rate of Procedure</text>
</subtitle>
<footer enabled="true" align="Center" padding="30">
<background enabled="false" />
<font bold="False" size="12" color="Red"/>
<text><![CDATA[Notice: This report generated considered privileged and confidential. &APP_TIME_STAMP.]]></text>
</footer>
<axes>
<y_axis>
<title><text>Percentage</text></title>
<labels>
<format>{%Value}{numDecimals:0}</format>
</labels>
</y_axis>
<x_axis tickmarks_placement="Center">
<title><text>Surgeon</text></title>
<labels rotation="90"/>
</x_axis>
</axes>
</chart_settings>
<data_plot_settings default_series_type="Bar">
<bar_series>
<tooltip_settings enabled="True">
<format>
{%SeriesName}{numDecimals:2,thousandsSeparator:}
{%YValue}{numDecimals:2}%
</format>
</tooltip_settings>
<bar_style>
<states>
<normal>
<fill color="%Color"/>
<border color="DarkColor(%Color)" thickness="1"/>
</normal>
<hover>
<fill color="LightColor(%Color)"/>
<border thickness="2"/>
</hover>
</states>
</bar_style>
</bar_series>
</data_plot_settings>
#DATA#
</chart>
</charts>
</anychart>please help me to solve this

Hi,
100 columns is a lot of columns. I understand why you are having this issue. I think you have two options here:
First, you could use a scrolling chart.
your x-axis custom XML would look something like:
<x_axis tickmarks_placement="Center">
<title><text>Surgeon</text></title>
<labels rotation="90"/>
<zoom enabled="true" allow_drag="false" />
</x_axis>Second, you could reduce the font size of the labels on the x-axis to a very small number, so that the text of the label is not wider than the column width. With 100 columns, you are probably talking about a terribly small font size, probably making it unreadable.
your x-axis custom XML would look something like:
<x_axis tickmarks_placement="Center">
<title><text>Surgeon</text></title>
<labels rotation="90">
<font size="4" />
</labels>
</x_axis>Austin
Edited by: AustinJ on Feb 11, 2011 11:13 AM - fixed typos

HT4174 Not sure what I did but projects are not showing up in the video window as i skim... Event footage does but project footage has sound but the video screen is gray... Hwo do I get the vido to show in the viewer?

Not sure what I did but projects are not showing up in the video window as i skim... Event footage does but project footage has sound but the video screen is gray... How do I get the vido to show in the viewer?

So you can ping and nslookup from your ms to these agents and vice versa right? I wouldn't do a manual install, I would push the agent from the management server. You can uninstall the agent manually, or use cleanmom to get rid of them. Then
do an install from the console. When you initiate the install from the console (management server), should it run into any issues it will dump out an error which will give you an idea of where the problem may be.
From Holmans post on this:
e MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
The MOM Server could not execute WMI Query "(null)” on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
8004100A
800706BA
1. Ensure agent push account has local admin rights
2. Firewall is blocking NetBIOS access. If Windows 2008 firewall is enabled, ensure “Remote Administration (RPC)” rule is enabled/allowed. We need port 135 (RPC) and the DCOM port range opened for console push through a firewall.
3. Inspect WMI service, health, and rebuild repository if necessary
4. Firewall is blocking ICMP (Live OneCare)
5. DNS incorrect
http://blogs.technet.com/b/kevinholman/archive/2009/01/27/console-based-agent-deployment-troubleshooting-table.aspx
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

Thumbnails not showing in project

A certain project suddenly stopped showing the images contained in it. It once did show the thumbnails, but then they disappeared. However, there are images in it somewhere cause if I just go to show all "Photos" I can see the photos in quesiton and the project path says that theyshould exist in the certain project. But when I click on just that project, no thumbnails.
What gives? For reference, I've attached a screen shot of the "empty" project.

Bob,
your screenshot shows, that you have a filter set for that project. Click into the searchfield and clear the filter
Regards
Léonie

Document not showing properly when opening in Acrobat 9 Pro

When I create a document in InDesign and export it as a PDF, I want to see what it looks like as the PDF. One of the documents that I opened does not look as it should. It only has the photo on the ad but is missing the red background and the words on the ad. As a thumbnail, it looks correct. But, it is not showing up correctly when I open it in Acrobat. Some of the other ads are fine but this one in particular is not showing me all the elements. What do I do to fix this?

Yes, I have the most current version of AA9. I exported the document from InDesign using the PDF exporter. That is what I have used for years and it has worked fine. I just installed CS4 yesterday.
I think I realized what the problem is but I don't know how to fix it properly. I actually went back to the preferences in AA9 to the document color options in accessibility and changed it back to its original state (which, I believe, is where nothing is checked). I had originally changed it because I was trying to experiment with the background of the program. It's black and when I open a PDF, I can't see the black border. But I mistakenly changed the document color. Which brings me to the question of: how do you change the background color of the page so that I can see the black border on the document? I sell advertising so I need to be sure that when people send me their ads, they have black borders. And I can't tell when it has the background behind the document so dark. Acrobat Reader has a white background.
Additionally, can I still install the latest Acrobat Reader and use that instead of AA9 if I want to? It seems easier.

Image Gallery Magic Thumbnails Not Showing

I have an existing page which I've added a new gallery to.
The gallery
looks fine in Dreamweaver but as soon as it's viewed in IE
the thumbnails do
not show up. If I select the encoding of the page to "none"
all works fine
with the gallery but my DIV tags don't works properly, i.e
they don't
center. I have uploaded an example of my page:
www.bluchip.gg/bc458a.htm
Any ideas?

Hi Warren,
Your style sheet has errors in it. Replace your style sheet
with a fresh
default one.
Al Sparber - PVII
http://www.projectseven.com
Extending Dreamweaver - Nav Systems | Galleries | Widgets
Authors: "42nd Street: Mastering the Art of CSS Design"
"Syztemlord" <[email protected]> wrote in
message
news:fr67fr$7oh$[email protected]..
>I have an existing page which I've added a new gallery
to. The gallery
> looks fine in Dreamweaver but as soon as it's viewed in
IE the thumbnails
> do
> not show up. If I select the encoding of the page to
"none" all works
> fine
> with the gallery but my DIV tags don't works properly,
i.e they don't
> center. I have uploaded an example of my page:
>
>
http://www.bluchip.gg/bc458a.htm
>
> Any ideas?
>

JPG from Illustrator not showing properly

Hi,
I'm using Illustrator CS4 to make still images like backgrounds and other stuff for my videos. I export them as JPG using the "Use artboard" export option in Illustrator and select "All" so all the artboards export at once.
I end up in this case two differents backgrounds named "image clip-01.jpg" and "image clip-02.jpg".
When I import them into Premiere, I can see my two differents images in the Project and Source Panel, but if I drag them into my sequence, those two images become the same. I mean the image number 01 looks like the image number 02. So even if I have two different images with two differents names, the first one preview is not showing in the sequence. I'v double check , re-exporting etc, same thing. Rename the files. Same thing.
The only way I can have my images to properly show is when I export them one by one in Illustrator. It's ok for two images, but when I have several of them, it's pretty annoying.
Any ideas how to fix that?
Thanks!

What happens if you Open those JPEG's in Photoshop, then just Save them, and Import. Do they now show the proper Image?
Are you using PrPro CS 5, or 5.5? There was a Bug in CS 5, where Still Images did not show correctly, and the little trip through Photoshop solved the issue. I believe that CS 5.5 fixed that.
Good luck,
Hunt

Premiere 2014 queue, project does not show up in media encoder

When I queue a sequence in premiere 2014 and media encoder 2014 launches the sequence does not show up in the queue. I can do the same process in cc and it works.

In AME, please try disabling the option on the General tab in Preferences named "Import Sequences Natively." Then close and relaunch AME and double-check prefs to make sure the option remained disabled (we've had a few reports of cases where the setting reverted to Enabled). Now try queuing a job from PPro.
Also, please try dragging the sequence from Premiere's Project panel to AME's Queue, or to a preset in the Preset Browser.
What export format is selected? If you switch to another format, does the job get queued?

Nikon Df Nef File Thumbnails not showing in Adobe Bridge CS5

HI,
I am having trouble getting NEF thumbnail to show in Bridge CS5, but only from the Nikon Df. All other, older, NEF files are showing up without a problem
I have installed the latest updates (Camera Raw etc)
I would appreciate any advice on getting this to happen.
Thanks
BD

Ok thanks for that, at least I wont be chasing my tail.
I did install the DNG converter 8.3 but I still NEF files as a NEF icon. Any clues to what I may not be doing right there?

Adobe Acrobat 8.1 Professional - Explorer Thumbnails not showing

Hi to all:
Recently I upgraded my Acrobat professional (part of the CS3 Design Premium Package) to version 8.1., and now the thumbnails in the windows explorer on PDF files are not showing anymore (in some files). It's only showing a simple sheet with the acrobat logo inside. Is there any way to bring them back?
I'm using Windows Vista Home Premium 32 bit, 1.5 Gb memory and a 256 Mb. Nvidia GeForce Go 7600 Graphic card.
Thanks in advance...

I have the same problem mentioned in the original post of this thread. It looks like the first reply misunderstood the issue. It is this:
In Windows Explorer on XP or Vista with Acrobat 7 (maybe 8.0 too, I don't know) the icon for a PDF file would display a thumbnail image of the first page of the PDF.
Starting with 8.1 (it might have been 8.0, but I skipped that version) the thumbnails are not shown -- only the Acrobat icon.
Before someone suggests it -- yes I have unchecked "Always show icons, never thumbnails" in the folder options dialog for Explorer. So that is not the problem here.
I have read hints about a fued between Adobe and Microsoft that brought this situation about. I am disappointed that Adobe is willing to punish their customers (again) as part of this battle.
With this and other lost features in 8.1 as well as the lack of response I have had over a licensing question, I have decided to switch to NitroPDF instead. If I have to, I'll write my own thumbnail viewer using the Foxit API.

Contents thumbnails not showing

I just generated two new single-folio apps. In the Contents menu, the thumbnail images are not showing. Where the contents thumbnails should be, only a capital letter is displayed. What would cause the thumbnail images to not show? How do I fix it?
Dave

Exactly how did you restore the iPhoto library?
LN

Project pictures not showing in browser

When I moved a project into a folder although the pictures are still listed in the inspector as being in the project they do not show up on the browser. How do I get them to show. I am using the vault system.

In the split view I see nothing when I select the project. When I select one of the albums below it the pictures show up in the lower line but not the upper part unless a lower one is selected.
I have done much since the controversial move so I'll have to wait till it happens again for a before & after. But these may help. This is the browser mode.

Project thumbnails not showing properly

Similar Messages

Maybe you are looking for