Project Thumbnails not visable

I have a project of Eighty images (referenced) and for some strange reason the thumbnails do not apear. If I make a smart folder to show all in that project they show up. This is the only project of many that does this. Kinda wierd, how do I fix it.
Thanks in advance
David

In the top right corner of your thumbnail Browser make sure you're not filtering out your images.
If you see an "X" there, click it to reset it, or just choose "Unrated or Better from" that drop down.
DLS

Similar Messages

Project thumbnails not showing properly

While nearing completion of my project I published the iMovie file to the Media Browser so I could access in GarageBand and work on the soundtrack. When I returned to iMovie to edit it further I noticed none of the thumbnails were showing. The project seemed intact. I rolled over each clip and everything worked as it should.
I began to edit the project and was prompted that I would have to re-publish the project again. This is as it should be. However, once I began editing the clips again all the thumbnails changed from blank to the image of the photo I just imported from iPhoto. All of them changed.
Is there anyway to reset the cache or something like this in iMovie 09? Something that will allow me to see the proper thumbnails. Although I can continue to work on the project, not knowing where my edits are makes it difficult.

Could you try disabling graphics hardware acceleration? Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches with some graphic cards/drivers.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
orange Firefox button ''or'' classic Tools menu > Options > Advanced
On the "General" mini-tab, uncheck the box for "Use hardware acceleration when available"
Does that make any difference?

LR3 thumbnails not visable

I've loaded LR3 and added my photos to the catalog. When LR was finding the photo files I could see the thumbnails, but now the catalog if populated I can no longer see any thumbnails in the film strip or library view. Even when I select a photo I can't see the picture.

Two likely possibilities:
1) If you can see the image in the develop module: Corrupt Preview Cache
While LR is closed, rename the folder "[catalogname] Previes.lrdata" which can be found in the same folder as the catalog itself (the file with the name "[catalogname].lrcat").
Restart LR, previews will be rebuilt
If it doesn't help, you can always delete the newly created previews folder and rename the old one back
2) If you cannot see the image in the develop module: Corrupt Display Profile
Recalibrate/Reprofile your monitor
If you have not calibrated it yourself, I would strongly recommend doing so by use of a calibration device
As a workaround, you can try assigning a sRGB ICC Profile to your monitor in Color Management (see this blog post of Victoria Bampton for details)
Beat

I am having trouble with the Jpeg icons and also now thumbnails not being visable in bith teh Apple finder and now also Adobe Bridge. Can anyone shed any light on this ?

I am having trouble with the Jpeg icons and also now thumbnails not being visable in bith teh Apple finder and now also Adobe Bridge. Can anyone shed any light on this ?

Argh - once again, I find my solution right after posting this. Left out one modification to the SWIG script, now it runs in 29 seconds vs C 16 seconds, I can live with that.

MTS thumbnails not displaying in PrE9

I have a thumbnail problem. I just bought PrE9 because I was unhappy with Studio V14's slow/jerky performance with AVCHD. I have a Canon HF20 and used Windows to move the videos (MTS's) over to my harddrive. They are all HD videos in MTS format. My PC is a Dell Pentium D, 3.46GHz, 4GB DDS RAM, 1GB of "free" harddisk space, ATI 4670 Graphics Card.
I had imported a number of MTS files from my Canon to harddisk using Windows and then imported them from harddisk into Organizer. The thumbnails were blank so I deleted them and tried re-importing just one clip but got the same problem. The clip can be inserted into a timeline and shows up with the first frame of the video but has a blank thumbnail in both Organizer and PRE. They play fine in either PrE9 and Organizer. Any suggestions.

Thanks for posting the screenshots. Thumbnail drawing does not seem to be taking place at all.
I dont think it is a codec related problem because had that been the case the playback also wouldn't have worked.
There is another place the thumbnails are seen and that is the "Project" view. Can you check if the thumbnails are seen in this view ?
Also, on the system running Pentium D how much RAM do you have ? Adobe states a minimum of 2 GB RAM for avchd editing.
(Though I would recommend 3 or 4GB). And since on your other system which has 8GB RAM things appear to be fine, low RAM could be
a potential reason for thumbnails not being seen. Again, I am just speculating.

Tables and views not visable in diagram organiser

HI
Opened my SSAS project and the tables are not visable in the Diagram Organiser.
When I right click on the pane and show all tables get :
Error HRESULT E_FAIL has been returned from a call to COM component
Then the tables appear without there relationships.
Cube still processes etc.
Any help please ?
BTW Just installed this on a new PC build.
Version:
11.0.3436.0
File Name:
SSDTBI_VS2012_x86_ENU.exe
Date Published:
26/06/2014
File Size:
784.0 MB

Hi Bifool,
According to your description, the issue was solved when open this project in Visual Studio 2013, right?
SQL Server Data Tools – Business Intelligence for Visual Studio 2013 (SSDT BI) for SQL Server 2014. So when you open this project in VS 2013, the project was upgraded to SQL Server
2014 version automatically which might solve this issue.
Besides, for the error
Error HRESULT E_FAIL has been returned from a call to COM component
It seems that it's a known issue, please refer to the links below.
https://connect.microsoft.com/SQLServer/feedback/details/484146/getting-an-error-when-trying-to-browse-a-cube
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/58a07890-52f6-4adc-8cdd-bbfcb30e87c6/browsing-a-cube-error-hresult-efail-has-been-returned-from-a-call-to-a-com-component-microsoft?forum=sqlanalysisservices
Hope this helps.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

.MTS files in elements organizer: no thumbnails, not playing

Some google searching shows that i´m not alone with this problem, but i haven´t found a solution.
.MTS files plays in premiere elements (lagging terribly though) but not in elements organizer, where i get this error message:
Updated quicktime as suggested, no improvement.
Source of .MTS files is a Panasonic G5.
Running W7 64 bit. same problems in both elements organizer 11 & 12.
If it was a codec issue i assume it would not play in Premier elements either?
Any suggestions?

Hi A.T.
1. I'm using Premiere Elements 9. I have an Asus laptop with windows 8.1
2. I believe i have the latest driver. I have Intel HD Graphics. I ran a check to look for updated drivers and it came back as saying I had the latest.
Background
I've only had the laptop since October so that's how long the program has been on the computer.
I was able to use it a few days ago. At that time I had been using video from the same camera but that time it I had saved it originally to the camera's internal memory. When I had the problem last night it was with video I had saved to a memory card. A message which I do not remember came up asking if I'd like to change the preset as my current settings didn't match the video format. I said yes and then nothing worked after that. I can't even view the project I did several days ago now either.
How I search for the presets? I've never changed these before.
It is AVCHD file type and 1080 but I am unfamiliar with the how to know anything further.
Tracey
Date: Tue, 4 Feb 2014 20:55:46 -0800
From: [email protected]
To: [email protected]
Subject: .MTS files in elements organizer: no thumbnails, not playing
    Re: .MTS files in elements organizer: no thumbnails, not playing
    created by A.T. Romano in Premiere Elements - View the full discussion
Goldsk8te
You put yourself at a disadvantage by tagging on to an older thread and not starting a new thread of your own. I just saw your post now.
So let us get to the troubleshooting...
1. What version of Premiere Elements are you using and on what computer operating system is it running?
2. This has all the symptoms of a display problem. Do you have the latest version of your video card/graphics card according to the web site of the manufacturer of the card? If so, we are going to need to delete the BadDrivers.txt file. But I need the information in "1" to tell you how to get there and do that.
Some background information please....
1. How long have you been working with this version on its current computer operating system?
2. How would you class this issue "It worked before but not now" or "it never worked before"?
3. What is your project preset?
4. What are the properties of this .mts files...AVCHD video compression? 1080i or 1080p or other?
More later in the morning.
ATR
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6087192#6087192
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6087192#6087192
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6087192#6087192. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Premiere Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Thumbnails not loading

Ok so I'm running CS6 and working on a project that has around 100 Canon XF clips (from a C300) in the project. I want to be able to scroll through my clips in the project window so that I can quickly grab certain shots without having to load them all into the source monitor.
When the project opens the thumbnails for the 12 or so clips currently being shown in the project window are automatically displayed fine, but when I scroll down the list the remaining thumnails only get created as those clips become visible in the project window, very frustrating! I have to scroll down a few clips at a time in order to try and get thumnails to display for all of the clips. To make matters worse, after about 50 of the clips have loaded thumnails the process just stops, I'm left with a whole bunch of grey squares in the project window leaving me to guess what the content may be thats hiding behind them.
I'm on a 12 core Mac Pro with 48 Gigs of Ram, and a CUDA enabled Nvidia Quadro GPU. The clips are all located on an internal SSD drive with caches stored on a second SSD drive. The machine is at idle during this whole process with barely any load visible so why are these thumnails proving to be such a problem for my machine to display?
Thanks
Paul

Hi - Firefox, Safari and Ebay thumbnails not loading.
Suffered from this problem ever since upgrading to Snow Leopard.
I can confirm by turning off my Belkin Routers firewall ... and double checking my Macs firewall is on and up to scratch, has cured this most frustrating problem.
So I must surmise, that the bug is in Snow Leopard. Cant really blame Belkin. Apple needs to address this problem in their next upgrade as it has wasted countless hours.It worked before ... but not after upgrade.
I'd feel a lot happier though if my main router (Belkin) had its firewall on as well.
Lets see what happens next! Hope this helps.

Unable to Update Project Thumbnail - Disk May Be Full

When I open iMovie, all of my projects have an alert message indicating "Unable to update thumbnails for project 'XXXXX.rcproject'. Your disk may be full." Thankfully when I say OK to each alert message my project thumbnails do appear and each project appears to be ok. Any thoughts on how to get rid of the alert messages?
Thanks

I have had the same issue, but it does not appear that others have answered. Wondering if you have received any answers independently? I have an Elgato 250 plus and an iMac 27" computer for background. I also sent a query to Elgato last evening - no response as of yet though.
"I have successfully recorded through my eyeTV 250 plus older home movies that had been recorded in several formats (VHS tapes, 8mm cassette tapes, some DVDs where I recorded some old tapes via a Panasonic HDD, and in some cases I had to use the Master DVD RAM disks as some of the original tapes were degraded. They transferred successfully as eyetv recordings.
Next I exported these to iMovie. In total there were 90 recordings that I made. Most transferred satisfactorily and were ok. But a total of 16 gave me an error message as follows (one example):
"Unable to update thumbnails for project '1996-09_ PMHS Soccer - Roberto - PMHS vs Western Wayne - September 3, 1996.rcproject'. Your disk may be full."
The disk is not full as I have some 800gb of total disk space. I do not know if it is due to a recording issue or choices made when exporting or an iMovie issue. I have not been able to find any on-line similar issues published, so I am exploring this issue with you as well as Apple in parallel. I also recall seeing another error message once referring to "quartz video card??".

Project Clip Not Found

When I open iMovie, one of my projects (I have several that work ok) prompts the message "Unable to update thumbnails for project 'Evan Colt Clip 9-22.rcproject'. Your disk may be full."
When viewing the project library, the video clips do not include any images. However, if I play the project it plays the entire originally video with sound. And the original Events are all on an external hard drive and are still there and play fine.
Is there a way to repair this so I do not continue to get this message? I want to work with this project without having to redo it entirely.
Thanks.

I have the exact same issue. In my case the project thumbnails are visible and the projects work fine - I just get the stated error message for all projects.

JPEG Not Visable During DMD Presentation Preview

DMS 5.2.1
When we preview a presentation (in Digital Media Designer) any JPG images within the presentation are not visable. We thought this may be a Java issue but have tested this on multiple computers with the same result. All test computers have the latest Windows and Java updates. The issue has been confirmed with both Internet Explorer 8 and FireFox 3.6.8 browsers.
Any help is appreciated.
Thanks,
Jeff Hostilo

Jeff,
A couple of things:
* Verify what version of Flash Player is installed. This can be done by going to the following URL:
   http://www.adobe.com/software/flash/about/
   The version used by you browser will be displayed in the middle of the page. The latest is 10,1,82,76.
* Then go to the media library on the DMM-DSM. Select one of the JPEG images that you are having
   issues with. Right Click and select VIEW asset. Do you see the image in the preview Thumbnail?
   Capture a Screen Capture of the entire view screen and upload for us.
* Then open DMD, Open the presentation in question. Are you using a Media Playlist or Slideshow Playlist?
   Double Click on the Playlist and capture a screen capture of the entire playlist screen and upload it for us.
   Hit Ok and then Select Preview, the preview screen should pop up and the jpegs should be viewable, but as
   you report they are not.   Select the preview web page and then (depending on browser) select VIEW SOURCE from
   the browser command tabs. Copy & Paste the page source in a text file and upload that as well...
Thanks
T.

When sharing iMovie11 project with iDVD inmediately message 'the project could not be prepared for publishing because an error occurred (Error in user parameter list). Finalize issue?

When sharing my 60 minutes iMovie project with iDVD inmediately message 'The project could not be prepared for publishing because an error occurred (Error in user parameter list)' appears. Could not find the user parameter list, so I've no more info about this error.
Option File - Finalize Project gives inmediately the same errormessage.
Also option Share - Media Browser - Large/Medium/Mobile give the same errormessage.
Please advise, thank you!

Additional info: trying to write to internal disk (268 GB Free out of 499 GB)
Please advise, alko80

The project could not be prepared for publishing because an error occurred.

I have just loaded iLife 09 on my MAC. I've edited a movie and now want to export it, put it in iTunes, whatever I can do to move it beyond my laptop. No matter what option I choose under Share I get the same error message, "The project could not be prepared for publishing because an error occurred. (-2009)". I can find the error message online, but not the (-2009) error code. I'm also a longtime PC person who has just switched to a MAC. Can anyone help?

I also am having the exact same problem. iMovie '09. I have tried changing permissions on all sharing folders, exporting to desktop, sharing to iTunes in all size files - and yet still get "Unable to prepare project for publishing. error (-2009).
Mac OSX version 10.6.2 Snow Leopard

Aperture 3 project does not display any images in one Project

This is a strange situation. The bullets below outline the situation:
The project does not display any images
When I place the pointer over the project it shows there are 500+ images
I have located the RAW images stored in my aperture library
I can pull up the images using a smart folder and searching for photos taken on the event day
This is happening only to one of my projects that I know of (weird!!)
I have tried to 're-add' the image by both importing and dragging and dropping into the project, neither works
I tried the following basics:
Fixed permissions
Rebuilt the database
Tried to re-import the data, but when I have the 'don't import duplicates' these are not an option
Found the images in my Aperture library
I created another project and drug all of the images into that project
Any idea how I can fix this?
My fear is that if I delete the original project, the original master images will be deleted.

The most common cause of this is some sort of stuff in the search box at the top of the browser that you don't expect to be there. Just clear it and all your images should show up.
RB
One note - if you drug your images from one project to another it moves them vs copies them unless you hold down the option key.

Open Other Project - Does Not Function

Hello -
We are finishing a CBT lesson in Cap 3 which includes 29
seperate projects. At the end of each project the student is
presented a button to take them to the next project, i.e. "Open
Other Project".
Here lies the issue, we have set this button to "Open other
project" and "Open URL or file". In both case the next project does
not open. The user is taken to an internet search page. We set up
the button "On Success" feature using the Captivate Help files
where it instructs you to remove all of the system paths and just
use the project or file names. Also confirmed button settings in
Advanced Interaction.
We are publishing our projects in .exe formats. This isuue is
present when we preview it using the preview feature and from the
.exe products.
What are we doing wrong, any ideas?

Hi again
I just conducted a brief test using a Button object and the
exact file names you listed. Things worked as expected on my end.
This is actually good news, as it suggests Captivate 3 isn't to
blame. Instead, something is wonky with your project(s).
One thing that strikes me here is that you say you are seeing
a Web Browser open. This suggests your button is programmed to
"Open URL or File" and not "Open other project". You may wish to
double check that. If you examine it and it already says "Open
other project", you may wish to delete that button and insert a new
one. Maybe somehow it became corrupt and is retaining the Open URL
or File setting and not respecting the Open other project setting.
Cheers... Rick

Project Thumbnails not visable

Similar Messages

Maybe you are looking for