Project was not closed .

Hi
i am one problem in settlement . my clients are not settled the bills in last year with in the prescribed period. they settled that period, and after that they are posted to that settled period. now i can settle that amount in that particular period or in that particular wbs element? please concluse me and give the solution to my problem.
i checked that details in CJI3 T.code, there i got the details.

I really didnt understand your question, can you give some more details?

Similar Messages

  • Sync Issue: A string literal was not closed

    Hi, my sharepoint has stopped syncing to skydrive. The issue I see is 
    Error Details:
    Unable to parse SOAP response. XML Error: 0x-1072896672 'A string literal was not closed.
    Can someone please help.
    Thanks a lot.

    Hi BlingSingh,
    According to your error message, it says that a XML file  misses a closing tag and the skydrive client cannot parse SOAP response.
    For the issue, please make sure your User profile service  is  running correctly  and the My Site configure process is correct.
    Also try to stop syncing the library and then re-syncing the library. Reference: Stop
    syncing a library with SkyDrive Pro.
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • My project was not saved and is now gone...where did it go?

    Help
    My project was not saved and is now gone...where did it go?

    Check to see if Premiere autosaved your project. Open Premiere and start a new project.
    File Menu > Project Settings > Scratch Disks
    The last entry is 'Project Auto Saves'. See where this is pointing on your computer. If you are very lucky, Premiere may have autosaved your project from before and you'd be able to find it and open it that way.
    Otherwise, you won't be able to recover a project that wasn't saved.

  • The project was not built since its build path is incomplete

    Hi, Recently I port my project fro bea 8.1 to 10.2 & I am ubale to find following packages... workspace studio alos not able to find teh librraies contabing those files.
    The project was not built since its build path is incomplete. Cannot find the class file for weblogic.management.ManagementException. Fix the build path then try building this project
    The project was not built since its build path is incomplete. Cannot find the class file for weblogic.security.service.ResourceBase. Fix the build path then try building this project
    com.bea.p13n.mbeans.MailServiceMBean
    -KASH

    It seems this occurs since the required jar files for building the files is not available in the IDE build path.
    The build classpath is the path which is used to find classes that are referenced by your source code. During compilation, this path is used to search for classes outside of your project. As you know th build classpath can be specified for each project. In the project properties, it is referred to as the "Java Build Path Adding a JAR file to the build path : You can add a JAR file stored either in the workbench or anywhere in your file system to the build class path. To add a JAR to your build class path follow these steps: 1>>Select the project, and from its pop-up menu, select Properties. In the Properties dialog,select the Java Build Path page. 2>>Click the Libraries tab. You can now either add a JAR file which is contained in your workspace or which is somewhere else: to add a JAR file which is inside your workspace click the Add JARs button to add an external JAR file click the Add External JARs button.

  • The project was not built since its classpath is incomplete.

    Dear Experts,
    I am getting the following error in NWDS,
    The project was not built since its classpath is incomplete.  Cannot find the class file for java.lang.Object. Fix the classpath then try rebuilding this project.
    Please Suggest
    Warm Regards,
    Upendra Agrawal

    Hi
    Close the project in nwds, close nwds and open again.
    Now try to open project again.
    Else
    Take back copy of project from workspace, delete the project from nwds completely
    Close nwds and open again
    Again import the back up copy

  • Project was not deleted error

    Hi,
    We are using MII 12.0 version. I imported one project into it and after some modifications in query templates, when i tried to delete it from System Management -> Projects page , it is showing alert as "Project was not deleted".
    I am able to delete other projects. I tried to delete from work bench there it is showing error as "Error On Delete: org.xml.sax.SAXParseException: Content is not allowed in prolog".
    What is the problem and how to delete that project.
    Regards,
    Senthil
    Edited by: senthil kumar on Nov 16, 2010 1:00 PM

    Hi,
    We found the problem and deleted the project.
    We tried it by deleting folder by folder. While deleting In one folder it showed same prolog error and it is coming when one particular transaction is being deleted. When we analysed, we found that this transaction is not loaded successfully as it contains error data as letters like @#$@$@*$@&&!#$ as continously. we replaced this transaction with new empty transaction with same name and we tried again to delete and it is deleted. after that we were able to delete the project from Project page.
    Thanks.
    Regards,
    Senthil

  • Atg.workflow.WorkflowException: The inner project was not created.

    Hi,
    I am trying to import some data into publishing server using startSQLRepository, but it is throwing the below error when I am executing the below script.
    startSQLRepository -m DCS.Versioned -repository /atg/registry/ContentRepositories/MediaRepository/ -import C:\keystore\MediaRepository.xml -project RajeevTest -user admin -comment mediaexport
    Caused by: atg.workflow.WorkflowException: The inner project was not created. Check that your project workflow has been initialized by the workflow engine
    at atg.epub.project.ProcessHomeMethods.initializeProcess(ProcessHomeMethods.java:410)
    at atg.epub.project.ProcessHomeMethods.initializeProcessWithGlobalWorkflow(ProcessHomeMethods.java:343)
    at atg.epub.project._ProcessHome_Impl.initializeProcessWithGlobalWorkflow(_ProcessHome_Impl.java:53)
    at atg.epub.project._ProcessHome_ReposImpl.initializeProcessWithGlobalWorkflow(_ProcessHome_ReposImpl.java:3)
    at atg.epub.project.ProcessHomeMethods.createProcessForImport(ProcessHomeMethods.java:172)
    at atg.epub.project._ProcessHome_Impl.createProcessForImport(_ProcessHome_Impl.java:25)
    at atg.epub.project._ProcessHome_ReposImpl.createProcessForImport(_ProcessHome_ReposImpl.java:3)
    ... 8 more
    Please help.
    Thanks,
    Rajeev

    I had already this problem, I solved with Oracle Metalink [ID 1038072.1]
    https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=1038072.1
    Edited by: georgeo on Mar 16, 2012 8:57 AM

  • "Part of the project was not played" error

    I just got a brand new iMac--double the number or processors and twice the RAM as the old one--and I keep getting this error in Garageband:
    Part of the project was not played
    This project has too many real instrument tracks to be played in real-time.
    To optimize performance, see the 'Optimizing GarageBand performance' page in GarageBand Help.
    This issue only rarely cropped up on my old machine, and it was usually because the computer was chugging away on too many projects at once.  I am editing a podcast which has two (rather long) audio tracks.
    I have quite all other applications.
    I have fixed permissions.
    I have tried from another user account.
    I have deleted prefs files.
    I have reinstalled Garageband.
    Nothing is helping.  This is very frustrating.
    Any guidance you could give me would be EXTREMELY appreciated!
    Thanks!
    Evan

    In my case, the culprit was backups and disk-related software eating large amounts of CPU.
    I recently ran into this problem with a very small project. Even after locking all tracks, I could not record all the way through the project without getting "project not played".
    One pattern I noticed was that I could never get through the whole project when Time Machine was backing up. So I turned off TM and tried again.
    Even then, I couldn't get all the way through. Running Activity Monitor, I could see that WD's disk software (came with the My Book drive I use for backup), would periodically consume a big chunk of CPU, even though I wasn't using the WD disk... even if I dismounted the drive. So I uninstalled the WD software.
    With this change, Activity Monitor shows ~0% CPU. TM can still give problems, so I shut it down when I record.
    Now GB runs fine, even with multiple tracks unlocked.
    Moral: use Activity Monitor to make sure something isn't chewing up too much CPU. It may be an intermittent load, which makes it harder to see. But a big burst in non-GB CPU activity can stop GB, even if the burst is brief.
    ~2010-vintage iMac, 8GB RAM, GB '11

  • Project was not able to connect to project server

    We have a user running Project 2007 who gets the following error when trying to open Project:
    "Project was not able to connect to project server because of the following error: the credentials you used to login may not be correct."
    The users PC had been disjoined and rejoined to our domain to fix a separate issue and since doing that she is getting this error when trying to open project. We have confirmed her network credentials are good and she is able to access other network resources
    with no problem.
    Thanks
    Hank Vare

    Sorry for the abbreviation used, by PWA i mean Project Web Access, which is the other interface for Project server essentially the IE where you open the Project Web App
    I asked this based on the assumption given the error "Project was not able to connect to project server "
    Hence assuming you are trying to connect to project server and you have a project server environment, if that's not the case and you are working standalone then navigate to Start >> All programs >> Microsoft office >> Microsoft Office tools
    >> Microsoft Project Server Accounts >> Select the computer and Set it as default
    Thanks | epmXperts | http://epmxperts.wordpress.com

  • DataSourceConnection was not closed!

    I'm developing with Jdev 9.0.3_1 testing with the embebed OC4J. I've some CMP EntityBeans and sometimes I get the following error message "DataSourceConnection was not closed! DriverManagerConnectionPoolConnection not closed, check your code! (Use -Djdbc.connection.debug=true to find out where the leaked connection was created)"
    I don't open or close connections explicitly.
    Any idea?
    Thanks in advance.
    Julio.

    This message is as a result of a bug in 9.0.3 with CMP/CMR without specifying a transaction attributes for entity bean methods. These are fixed in 9.0.4, please try this in 9.0.4 Developers preview
    regards
    Debu

  • I keep getting "Part of the project was not played" during playback

    "This project has too many real instrument tracks to be played in real-time.
    To optimize performance, see the 'Optimizing GarageBand performance' page in GarageBand Help."
    I went to the help but I can't seem to find a problem.   Running gb11 V6.0.5 on a macbook processor 2.2 GHz intel core i7 with mem 8 gb 1333MHz DDR3
    I only have two "real instrument" tracks using basic effects....track 1 is acoustic guitar and vocal and track 2 is mandolin.
    I must have a setting causing havoc somewhere i guess.....nothing else running on computer.
    Any ideas on what i need to do?

    In my case, the culprit was backups and disk-related software eating large amounts of CPU.
    I recently ran into this problem with a very small project. Even after locking all tracks, I could not record all the way through the project without getting "project not played".
    One pattern I noticed was that I could never get through the whole project when Time Machine was backing up. So I turned off TM and tried again.
    Even then, I couldn't get all the way through. Running Activity Monitor, I could see that WD's disk software (came with the My Book drive I use for backup), would periodically consume a big chunk of CPU, even though I wasn't using the WD disk... even if I dismounted the drive. So I uninstalled the WD software.
    With this change, Activity Monitor shows ~0% CPU. TM can still give problems, so I shut it down when I record.
    Now GB runs fine, even with multiple tracks unlocked.
    Moral: use Activity Monitor to make sure something isn't chewing up too much CPU. It may be an intermittent load, which makes it harder to see. But a big burst in non-GB CPU activity can stop GB, even if the burst is brief.
    ~2010-vintage iMac, 8GB RAM, GB '11

  • Purchase Requsition is not closing automatically During ME59 PO creation

    Hi,
    We are using PO creation through ME59,
    In ME59 we have set the indicator 1 Set reqs. to "closed"
    In PR we have 1 qty and in PO was created for 1 qty. But the PR was not closed.
    When we check the F1 help for the filed it say it will work with respect to the rounding value. as for my concer the PR qty 1 was fulfilled by po with 1 qty creation.  I dont know why the PR was not set to Closed automatically.
    If we try 2 Set reqs. to "closed" It is working
    Can any once explaing why it is not wroking for indicator 1
    Regards
    Palani

    Is your order unit and requisition unit same ?

  • Upon opening Outlook 2003 get message "Not closed properly. File is being checked for erros."

    When opening Outlook 2003 get an error message stating that is was not closed propertly and that the file is being checked. It can sometimes take up to 5-10
    minutes for outlook to open. How can I stop this?

    You need to figure out why Outlook is not closing property. The usual culprits are addins that access Outlook data. 
    Are you closing outlook before shutting down windows? If you let windows shut it down, you can corrupt the pst. 
    Does it work better in Safe mode? To open Outlook in Safe mode: Close Outlook then hold Ctrl as you click on the Outlook icon. You'll get a message asking if you want to start in Safe mode. Click Ok. 
    Diane Poremsky [MVP - Outlook]
    Outlook & Exchange Solutions Center
    Outlook Tips
    Subscribe to Exchange Messaging Outlook weekly newsletter

  • Just imported clips and edited as new project. closed imovie. came back later and the entire project was gone. i was not done so i did not finalize it. how do i get the program to keep my project in progress

    running imovie on a powermac w 10.6.8. went through the tutorials. imported my clips, got the hang of basic editing, and created a project.
    was pretty happy with it, but needed to shut down and come back to work on it later. when i did come back, the entire project was gone.
    how do i get the program to save my work in progress, without finalizing it?
    thanks

    So, everything worked out just fine!
    I have all my material in the ProRes Codec on a seperate drive now. The project itself was kept or rather duplicated, the bin structure etc stayed the same but is linking to the newly created files. The playback and workflow is fluent. I am happy! 
    Time info: For about 120 GB of material the codec change process took 25 hours.
    Thanks for your help!
    Best
    *a

  • TcpListener not working on Azure: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host

    Hi Everybody,
    i'm playing a little bit with Windows Azure and I'm blocked with a really simple issue (or maybe not).
    I've created a Cloud Service containing one simple Worker Role. I've configured an EndPoint in the WorkerRole configuration, which allows Input connections via tcp on port 10100.
    Here the ServiceDefinition.csdef file content:
    <?xml version="1.0" encoding="utf-8"?>
    <ServiceDefinition name="EmacCloudService" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition" schemaVersion="2014-01.2.3">
    <WorkerRole name="TcpListenerWorkerRole" vmsize="Small">
    <Imports>
    <Import moduleName="Diagnostics" />
    <Import moduleName="RemoteAccess" />
    <Import moduleName="RemoteForwarder" />
    </Imports>
    <Endpoints>
    <InputEndpoint name="Endpoint1" protocol="tcp" port="10100" />
    </Endpoints>
    </WorkerRole>
    </ServiceDefinition>
    This WorkerRole is just creating a TcpListener object listening to the configured port (using the RoleEnvironment instance) and waits for an incoming connection. It receives a message and returns a hardcoded message (see code snippet below).
    namespace TcpListenerWorkerRole
    using System;
    using System.Net;
    using Microsoft.WindowsAzure.ServiceRuntime;
    using System.Net.Sockets;
    using System.Text;
    using Roche.Emac.Infrastructure;
    using System.IO;
    using System.Threading.Tasks;
    using Microsoft.WindowsAzure.Diagnostics;
    using System.Linq;
    public class WorkerRole : RoleEntryPoint
    public override void Run()
    // This is a sample worker implementation. Replace with your logic.
    LoggingProvider.Logger.Info("TcpListenerWorkerRole entry point called");
    TcpListener listener = null;
    try
    listener = new TcpListener(RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint);
    listener.ExclusiveAddressUse = false;
    listener.Start();
    LoggingProvider.Logger.Info(string.Format("TcpListener started at '{0}:{1}'", RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Address, RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Port));
    catch (SocketException ex)
    LoggingProvider.Logger.Exception("Unexpected exception while creating the TcpListener", ex);
    return;
    while (true)
    Task.Run(async () =>
    TcpClient client = await listener.AcceptTcpClientAsync();
    LoggingProvider.Logger.Info(string.Format("Client connected. Address='{0}'", client.Client.RemoteEndPoint.ToString()));
    NetworkStream networkStream = client.GetStream();
    StreamReader reader = new StreamReader(networkStream);
    StreamWriter writer = new StreamWriter(networkStream);
    writer.AutoFlush = true;
    string input = string.Empty;
    while (true)
    try
    char[] receivedChars = new char[client.ReceiveBufferSize];
    LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
    int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
    char[] validChars = new char[readedChars];
    Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
    input = new string(validChars);
    LoggingProvider.Logger.Info("This is what the host sent to you: " + input+". Readed chars=" + readedChars);
    try
    string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
    writer.Write(orderResultFormat);
    catch (Exception e)
    LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
    client.Close();
    break;
    catch (Exception ex)
    LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
    client.Close();
    break;
    }).Wait();
    public override bool OnStart()
    // Set the maximum number of concurrent connections
    ServicePointManager.DefaultConnectionLimit = 12;
    DiagnosticMonitor.Start("Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString");
    RoleEnvironment.Changing += RoleEnvironment_Changing;
    return base.OnStart();
    private void RoleEnvironment_Changing(object sender, RoleEnvironmentChangingEventArgs e)
    // If a configuration setting is changing
    LoggingProvider.Logger.Info("RoleEnvironment is changing....");
    if (e.Changes.Any(change => change is RoleEnvironmentConfigurationSettingChange))
    // Set e.Cancel to true to restart this role instance
    e.Cancel = true;
    As you can see, nothing special is being done. I've used the RoleEnvironment.CurrentRoleInstance.InstanceEndpoints to retrieve the current IPEndpoint.
    Running the Cloud Service in the Windows Azure Compute Emulator everything works fine, but when I deploy it in Azure, then I receive the following Exception:
    2014-08-06 14:55:23,816 [Role Start Thread] INFO EMAC Log - TcpListenerWorkerRole entry point called
    2014-08-06 14:55:24,145 [Role Start Thread] INFO EMAC Log - TcpListener started at '100.74.10.55:10100'
    2014-08-06 15:06:19,375 [9] INFO EMAC Log - Client connected. Address='196.3.50.254:51934'
    2014-08-06 15:06:19,375 [9] INFO EMAC Log - Buffer size: 65536
    2014-08-06 15:06:45,491 [9] FATAL EMAC Log - Unexpected exception while Reading the request
    System.IO.IOException: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host
    at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
    --- End of inner exception stack trace ---
    at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
    at System.IO.StreamReader.ReadBuffer(Char[] userBuffer, Int32 userOffset, Int32 desiredChars, Boolean& readToUserBuffer)
    at System.IO.StreamReader.Read(Char[] buffer, Int32 index, Int32 count)
    at TcpListenerWorkerRole.WorkerRole.<>c__DisplayClass0.<<Run>b__2>d__0.MoveNext() in C:\Work\Own projects\EMAC\AzureCloudEmac\TcpListenerWorkerRole\WorkerRole.cs:line 60
    I've already tried to configure an internal port in the ServiceDefinition.csdef file, but I get the same exception there.
    As you can see, the client can connect to the service (the log shows the message: Client connected with the address) but when it tries to read the bytes from the stream, it throws the exception.
    For me it seems like Azure is preventing the retrieval of the message. I've tried to disable the Firewall in the VM in Azure and the same continues happening.
    I'm using Windows Azure SDK 2.3
    Any help will be very very welcome!
    Thanks in advance!
    Javier
    En caso de que la respuesta te sirva, porfavor, márcala como válida
    Muchas gracias y suerte!
    Javier Jiménez Roda
    Blog: http://jimenezroda.wordpress.com

    hi Javier,
    I changed your code like this:
    private AutoResetEvent connectionWaitHandle = new AutoResetEvent(false);
    public override void Run()
    TcpListener listener = null;
    try
    listener = new TcpListener(
    RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint"].IPEndpoint);
    listener.ExclusiveAddressUse = false;
    listener.Start();
    catch (SocketException se)
    return;
    while (true)
    IAsyncResult result = listener.BeginAcceptTcpClient(HandleAsyncConnection, listener);
    connectionWaitHandle.WaitOne();
    The HandleAsync method is your "While (true)" code:
    private void HandleAsyncConnection(IAsyncResult result)
    TcpListener listener = (TcpListener)result.AsyncState;
    TcpClient client = listener.EndAcceptTcpClient(result);
    connectionWaitHandle.Set();
    NetworkStream netStream = client.GetStream();
    StreamReader reader = new StreamReader(netStream);
    StreamWriter writer = new StreamWriter(netStream);
    writer.AutoFlush = true;
    string input = string.Empty;
    try
    char[] receivedChars = new char[client.ReceiveBufferSize];
    // LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
    int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
    char[] validChars = new char[readedChars];
    Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
    input = new string(validChars);
    // LoggingProvider.Logger.Info("This is what the host sent to you: " + input + ". Readed chars=" + readedChars);
    try
    string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
    writer.Write(orderResultFormat);
    catch (Exception e)
    // LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
    client.Close();
    catch (Exception ex)
    //LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
    client.Close();
    Please try it. For this error message, I suggest you could refer to this thread (http://stackoverflow.com/questions/6173763/using-windows-azure-to-use-as-a-tcp-server
    ) and this post (http://stackoverflow.com/a/5420788).
    Regards,
    Will
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

Maybe you are looking for