Project which should have 700* photos is blank

Project is present in listing. When cursor held over project name it states
the name and # of versions. Photos are present in Photos section. I cannot
move photos, from photos, into the project. Project also shows up in Projects
section. When I click on the project - no pictures. Cannot figure out where they went : (
Any suggestions would be welcome. Or will I need to create a new project & schlep
pics out photos into the new project ?
Thanks!

Is this your only Aperture Library? If you have another library, any library doesn't matter whats in it, switch to that library then switch back to this library. Do (File->Switch to Library)
If you don't have another library then create one and then switch back.
Sounds odd but I've had a similar problem on occasion since moving to 3.1 and this has caused the 'missing' projects to reappear. There is definitely some sort of redraw problem in 3.1 Seen it in the white balance brick and most recently in the the crop brick. Values not getting updated even though the operation on the image is working as it should.

Similar Messages

When I share a link (URL) only Apple computers receive the link. Others such as PCs and Blackberries get the message, but the field which should have the link is blank. Is this normal? Why can I only send to Apple machines?

when I "share a link" (URL) using the pulldown menu in Safari, the email goes to all addresses I indicate, but only Apple computers receive the link. Others such as PCs and Blackberries get the message, but the field which should have the link is blank. Is this normal? Why can I only send to Apple machines?

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

HT204364 Hi, I have managed to make a calendar in iphoto but when I try and make a card I don't have any photos to drag and drop! I have tried opening an album but when I click on make a card the area which should have the photos in it is blank! Please

Hi,
I am trying to make a photocard in iphoto '09 but when I open an album and then click on card the area where the photos to drag and drop should be is blank. I have managed to make a calender (which has the photos there to use) and can't work out what I am doing wrong. Please can someone help? Thank you

Put the photos in an album, open the album and select all, go to the create button and select card - to add more photos to the project drag them ot the card project in the source pane on the left
LN

How can I quit my iPhoto screen that as crashed and locked on. The locked screen has no iPhoto file list on the left and the part of the screen that should have uploaded photos is blank except for the rotating download icon in the centre of screen. Help?I

My SD card reader has caused my iPhoto screen to be locked with no list of files on the lefthand side and a blank main photo area apart from the rotating download icon operating in the centre of the photo part of the screen.
I have tried to quit iphoto but when I restart it the same locked screen appears.
I believe I caused this problem when I removed my SD device without first ejecting it when the blank screen appeared without downloading my new photos.
Can anyone help a 66 year old computer illiterate fool ?.
Regards

Use Force Quit (under the Apple menu at the top) to close iPhoto. Then try opening it again. If it locks up again force quit and try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and check to see if the same problem persists.
If the problem does not persist try the following: make a temporary, backup copy (select the library and type Command+D) and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #1, followed by #3 and then #4 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
If the problem persists in the test library do the following: make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
OT

IPhoto was working fine. Performed update for HP printer, which should have nothing to do with iPhoto. But the next time I tried to open iPhoto, got this message. "To open your library with this version of iPhote, it first needs to be prepared." When I g

iPhoto was working fine. Performed update for HP printer, which should have nothing to do with iPhoto. But the next time I tried to open iPhoto, got this message. "To open your library with this version of iPhote, it first needs to be prepared." When I g

What version of iPhoto? Assuming 09 or later...
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Guys ... I have a 2008 MacPro running the current Yosemite. I also have installed the sound amp called "BOOM!" I have the Sound set to Line Out which should have the computer boot up to BOOM! Instead, it boots up to the Internal speaker. What's up?

Hi Folks ...
I have a 2008 MacPro running the current Yosemite. I have installed the recommended upgraded video card, but the sound is as it was new. I also have installed the sound amp/graphic equalizer called "BOOM!" I have the Sound set to Line Out which should have the computer boot up automatically to BOOM! and thus to the external speakers. Instead, it boots up to the Internal speaker. According to the folks at "BOOM!", this is happening to others who have similar Macs. They can't find any explanation within BOOM!, so I am turning to you all. Any ideas?

Hi Kappy ...
Sorry, I guess I didn't state the problem very well.
I don't want the computer to boot up to the internal speaker. I want it to boot up to the external speakers. However, even though System Preferences is set on Line Out, when the computer boots up or reboots, it erroneously goes to internal speaker. So, every time I boot up, I have been going to System Preference/Sound and clicking on Line Out. From that point on, everything is OK until the next boot up. It is a small annoyance, but annoying all the less. The simple explanation seems to be that when the computer is shut down, it does not hold the setting for Line Out and resets itself to Internal Speaker. How do I change that behavior and get it to go to Line Out whenever it boots up?

If I upgrade my iOS from 5.1 to 6.0 then do I have to upgrade my Xcode also? So my question is all my old Xcode project which I have tried with Xcode 4.3.2 will be still there because I do not want to destroy them.

I have xcode 4.3.2 and iOS simulator Version 5.1 (272.21). But this course is on iOS 6. If I upgrade my iOS from 5.1 to 6.0 then do I have to upgrade my Xcode also? So my question is all my old Xcode project which I have tried with Xcode 4.3.2 will be still there because I do not want to destroy them.
I have a MacBook Pro (Software Mac OS X Lion 10.7.5 (11G63b). Please let me know about upgrading iOS version so that I will be able to do the class project.

To program for iOS 6, you need iOS 6 SDK. You need to download Xcode 4.5.x. But don't worry. All your previous projects are still alive and you are able to open them in the new Xcode.

[svn:fx-trunk] 9711: The manifest files which should have gone with 9708 ( add TLFTextInput).

Revision: 9711
Author:   [email protected]
Date:     2009-08-27 13:33:22 -0700 (Thu, 27 Aug 2009)
Log Message:
The manifest files which should have gone with 9708 (add TLFTextInput).
Add the base classes used in the TLFText.css selectors to the Halo manifest.
Add TLFTextInput to the spark manifest.
QE notes:
Doc notes:
Bugs:
Reviewer: Gordon
Tests run: mx ColorPicker,DateField,ComboBox,NumericStepper and TextInput as well as checkintests
one ColorPicker_events_toolTipHide failed - the timer does fire eventually but it seems to take much longer than the hideDelay=10000.
Is noteworthy for integration: yes
Modified Paths:
    flex/sdk/trunk/frameworks/halo-manifest.xml
    flex/sdk/trunk/frameworks/spark-manifest.xml

Thats good news.

List of MIGO document in which Excise have not been deducted by the user, which should have been deducted.

Dear All,
While doing MIGO, excise calculation is not been done by the users.
I want the list of document in which excise should have been done by not done by the users.
This would be the ABAP development but I need to know which table while give the correct information.

J1I7 standard report should serve your requriement. There are three radio buttons in the Selection screen. You will have to use them according to your requirement.
If you still want to go with Z report then have used the excise tables MSEG, MKPF, J_1IEXCHDR, J_1IEXCDTL, J_1IGRXREF, J_1IPART1 & J_1IPART2. You will find the entry in the Part1 table if Part 1 is updated and an accounting document in J_1IPART2 table if Part 2 is also posted.

I can not fint the texture files, which should have been installed with the CS6 and CC? why?

I installed Photoshop CS6 a while back. Later on I discovered that the texture files where missing, or not included? Later I installed Photoshop CC, to see if the texture files were included here. But no, it was not. As far as I concern, I know that the texture files are included, and should have been installed, but they were not. Someone have any idea why?

In Photoshop CC 2014, Filter Gallery opens the dialog below, and "Texture" is the last folder.

PR created through CRM service should have receipient field as blank

Hello All,
We are doing enh for receipient field blank when PR creates through CRM service but when the PR creates by CRM badi we are able to generate this receipient field as blank but it overwrites by STD Bapi in R3
Can anyone tell me how i can make this field blank by any R3 badi/user exit or nay other wayout
Regards
Pratap

>
Paul Clarence wrote:
> Hi all,
>
> Would be grateful for any advice as to what are the steps that should happen with this type of revenue recognition. I have read through the SAP Help documentation but this really describes just the customizing and not the process.
>
> THanks
> Paul
Hi, Paul!
In CR700 materials there is the next explanation: "Service-based revenue recognition (value/quantity contracts with a target quantity) means that the revenue is realized based on an event. Events are releases that are reflected as service orders or service confirmations. Once again, the billing document is posted to an accruals account first and the revenues are transferred to the revenue accounts in a second step."
Hope it helps
wbr
Vladimir

My Roboform passwords did not transfer when I downloaded the 4.0.1 version of FF. I downloaded and paid for a new version of Roboform which should have shown up as a toolbar but didn't. Can't seem to solve this problem.

Windows XP on Dell Dimension 4600. Updated Firefox to 4.0.1 successfully but Roboform didn't transfer. Help told me I needed to update Roboform. I did and paid for a new version(7.?)which was $9.95. Roboform wants more details but I can't tell what they want. I'm baffled and frustrated since all my passwords are hidden somewhere. Wish I'd never upgraded FF.

Nothing is working and I can't find the Roboform toolbar. Your lack of direct support is really irritating- a live chat at least would be helpful.

How can I recover my FCP X project which I have lost?

I accidentally unplugged my iMac whilst I was working on a project in the latest fcp x and now when I go back into fcp the project has comepletely vanished! How can I recover this?? Thanks

Have you looked in the Final Cut Pro Backups Folder in your Movies?
Try right clicking on the last one/show package contents/-- is your project there?

Speccy shows only 4GB GDDR5 though I should have 8GB

I have MSI GT70 2PE Dominator Pro which should have 8GB GDDR5 but Speccy shows only 4GB GDDR5. When I checked my GDDR5 amount through NCP it showed 8GB GDDR5.

Hello,
Maybe you could post this to Dragon Army or direct to the MSI Online Product Registration Center..
Hope this could help.

I should have said in my previous message that the iphoto program I am using is for an ipad 2. I simply want to know how to delete an edited album which contains one photo that I do not want taking up space.

I should have said in my previous message that the iphoto program I am using is for an ipad 2. I simply want to know how to delete an edited album which contains one photo that I do not want taking up space.

OK....I'm stumped. The message you are seeing is typically there to protect someone from syncing with a different computer/iTunes account. Is there any way anyone else has used your iPad and possibly connected it to their computer?

Project which should have 700* photos is blank

Similar Messages

Maybe you are looking for