Project Window - unable to select clips and drag or rearrange
Call me dumb, but I've tried everything to get a clip to drag/move/rearrange within the project window.
I've worked with Mac now for 3 years and it's gotta be simple!!!!
Deb
are you trying to move the clip or the thumbnail???. Be careful with this, the thumbnail displays by default 5 seconds of movie, but it is a continuous movie, although there are vertical bars. In order to move it you will have either to "split before selected clip", or copy and paste, etc., meaning editing.
You can change the length of the thumbnail, down to .5 sec and up to 30 sec. using the bar in the lower right.
Similar Messages
-
JAN 4, 2012
As of the Upgrade to Lion,. 2007 I-Mac - the Email portion, .. DOES NOT allow a Video Clips to be sent via the Email
as the I-Photo is not supported by Video Clips ( Previous Leopard )
No problem clip and drag via Quick Time Pro to the email and select the Attchment size to send. . Depending on the
Size of the Video Clip .. Now Lion only Export's 1 size, . only and as a result . . teh File is TOO Large and
Will NOT send via E-Mail ???
Between the Issue of the Lion, and Email issues , and the Upgrade of I-Touch to 5.1 from 4.2.1
as my Photo Size is Huge .. 70,000 + photos in the Computer. . and was 40,000 in the I - Touch .. .
The New I-Touch too will not Load the same as Previously used on either my 16 GB or 32 GB Unit . .
No Help . .. so far, .. as a Apple user since 1996 .. I have Never experieanced such frustration ???
( any one have some help if similar experiances ? thank you )JAN 4, 2012
As of the Upgrade to Lion,. 2007 I-Mac - the Email portion, .. DOES NOT allow a Video Clips to be sent via the Email
as the I-Photo is not supported by Video Clips ( Previous Leopard )
No problem clip and drag via Quick Time Pro to the email and select the Attchment size to send. . Depending on the
Size of the Video Clip .. Now Lion only Export's 1 size, . only and as a result . . teh File is TOO Large and
Will NOT send via E-Mail ???
Between the Issue of the Lion, and Email issues , and the Upgrade of I-Touch to 5.1 from 4.2.1
as my Photo Size is Huge .. 70,000 + photos in the Computer. . and was 40,000 in the I - Touch .. .
The New I-Touch too will not Load the same as Previously used on either my 16 GB or 32 GB Unit . .
No Help . .. so far, .. as a Apple user since 1996 .. I have Never experieanced such frustration ???
( any one have some help if similar experiances ? thank you ) -
In the middle of making a movie, the scroll bars vanished in the project window and I could no longer navigate at all. If I went to the project library and selected the project, another image of the project library slid in and entered onto my screen. after repeated attempts to open the project in various ways, I have it now, but there are holes in the project window (blank background) and no scroll bars. It does not respond to anything.
can someone help?I'm adding more information:
in Finder, my iMovie folders are all visible and accessible. When I click on a clip from iMovie Events folder, Quicktime opens and plays the clip. ALL my video is not missing - it just isn't showing up in the Event Library!
This happened all of a sudden, while I was working on iMovie project (on both computers).
All my Projects are intact, and play when I open them. -
I have created a movie of vacation pictures on my windows movie maker. ( Windows vista) When I open the timeline, click on audio, and drag a song from itunes, windows movie maker shuts down, and the song is not transferred. Are these systems incompatible? Can I upload the movie to I tunes somehow and then add the music tracks? Thank you...
You may need to convert the file to mp3
iTunes: How to convert a song to a different file format
http://support.apple.com/kb/HT1550
Correction, I was able to add m4a files to Windows Live movie maker in windows 7, but not sure about your version
Message was edited by: polydorus -
Exporting "Selected Clips" and iDVD Chapter Markers from iMovie
I've tried exporting "selected clips" from iMovie . The iDVD Chapter Markers do not appear as a menu option on the initial iDVD menu screen when "selected clips" is checked in the iMovie Share option. The chapter markers are limited to the clips I'm exporting. The "Share" dialog box seems to indicate that Chapter Markers should export but they don't. // I'm trying to break up a movie that's too long for a DVD (but I will later share to video from iMovie). I'd prefer not to make two iMovie projects out of this. Thanks!
iMac FP 17 Mac OS X (10.4.6)
iMac FP 17 Mac OS X (10.3.6)Hello, John,
Welcome to the discussions.
You can either do your 'share to video from iMovie' before or after creating your iDVDs. But, you will need to create a second iMovie if yours is too long for one DVD and you are wanting to make 2 DVDs from the one long movie.
To make the second one before sharing the entire movie:
Select the clips you want in the second movie, then go to 'Edit' and 'Copy'.
Then, select 'New' iMovie. When it opens, give it a name like "Part2" and then 'Paste' your selected clips. Save the movie, then go back to the first one. Delete the clips you just copied.
Close iMovie. Open your DVD project. Find the 'Media' tab, go to 'Movies' and drag and drop your first movie into iDVD. Finish the iDVD project. Save and close.
Then, create the second iDVD project for your second movie in the same way.
Do 'save as disk image' for each iDVD project. That way your project is intact for each one, and you will not lose anything when you change the iMovies. You can burn your DVDs from the disk images.
Now, go back to your second iMovie. Select the clips and copy. Close that movie and open the first one. Paste the second set of clips. Now you have your original movie back and can do your share to video from it. Delete the second movie. -
Boot Camp to install windows, unable to select the checkbox
Hello,
I recently purchased windows 8 64bit on a dvd and I'm trying to install it using Boot Camp Assistance on my Macbook Pro (early 2011). However, the second option is greyed out and I cannot select it.
I already downloaded the latest support software and I'm not sure why I'm unable to select the second option "Install or remove Windows 7 or later version"
Please Help/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *500.1 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_CoreStorage 439.2 GB disk0s2
3: Apple_Boot Recovery HD 650.0 MB disk0s3
4: Apple_HFS Backup 59.9 GB disk0s4
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS Macintosh HD *438.9 GB disk1
Logical Volume on disk0s2
Unencrypted
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: IR3_CCSA_X64FRE_EN-... *4.1 GB disk2
/dev/disk3
#: TYPE NAME SIZE IDENTIFIER
0: FDisk_partition_scheme *16.4 GB disk3
1: DOS_FAT_32 UNTITLED 16.4 GB disk3s1
/dev/disk4
#: TYPE NAME SIZE IDENTIFIER
0: Boot Camp *1.4 GB disk4
Abdullas-MacBook-Pro:~ 3bdulla3moodi$
Name: Macintosh HD
Status: Online
Size: 439248101376 B (439.2 GB)
Free Space: 18882560 B (18.9 MB)
| ----------------------------------------------------
| Index: 0
| Disk: disk0s2
| Status: Online
| Size: 439248101376 B (439.2 GB)
Encryption Status: Unlocked
Encryption Type: None
Conversion Status: NoConversion
Conversion Direction: -none-
Has Encrypted Extents: No
Fully Secure: No
Passphrase Required: No
Disk: disk1
Status: Online
Size (Total): 438876897280 B (438.9 GB)
Conversion Progress: -none-
Revertible: Yes (no decryption required)
LV Name: Macintosh HD -
when i hit auto fill under music it just says Itunes cannot add any song to "___'s Iphone" because no songs in your itunes library could be found.
there clearly is an anbundance of music that I have been syncing all the time, I have not the slightest idea why it just stopped working, also when I try to manually click and drag songs into the device tab in itunes, NOTHING happens.
any suggestions on how to fix itI have a very smilar problem. Recently imported my modest music collection from my old G3 CRT to a new Mac Mini by linking the two machines and then dragging the music library and songs over.
iTunes works fine in normal screen mode, music library is all there and all songs are visible and play but when trying to play back with the Apple Remote it opens up iLife ok and lists the playlists. Click on 'Songs' it says that there are no songs in the library. Click on any playlist then it goes to 'Shuffle Songs' then 'Error has occured' It can't seem to see the music library.
I put this question on iTunes and Mac Mini discussion and got:
Some other people have had similar problems, you might see if the suggestions in this thread help:
http://discussions.apple.com/thread.jspa?threadID=447043
Tried but as yet no success. Tried re-naming the iTunes Music Library.xml and also deleting com.apple.frontrow.plist from Library and letting it rebuild without any luck.
Any suggestions out there as how to resolve this? Thanks in advance. -
Selecting, Cutting and Dragging...
Hello,
I am quite new on InDesign and have a problem.
Recently i am working on a book which is consisting of severel PDF files. I place these files into InDesign and do some trimming like resizing them or masking some text fields.
The problem is I cannot choose, for instance, a field which contains a text. Just like in old program "Paint", do we have chance to select any field with a simple rectangular frame and include the selected field in that frame so to move it anywhere (Believe me not too far away just a couple of inches).
I tried several ways to do it but none of the attempts helped.
Such a great program must have something so simple for this I believe but I couldn't figure it out.
Thanks for the answers.If you didn't mean edit the text you can still copy, crop and shift.
If I understand what you're trying to do correctly my approach would be this:
Place the PDF where you want most of it
Copy the PDF and then "paste in place"
Crop to the area you want to shift
Shift that part of it
Use a white box as necessary to mask where it came from. -
Drag & drop audio clip from timeline to project window ?
i no longer can drag a clip from timeline to the project window & then breakout the clip to mono by selecting clip - audio options- breakout to mono - now when i drop an audio clip from timeline into the project window it does not show up anywhere in the project window - did an update get rid of this function ? it was much better than having to go back to the unedited original source & start from scratch ...
thanx for your time Jim - i understand that would be the preferred method but that was a quick fix until recently i have noticed that i can no longer do it by just grabbing the edited clip & drop it in project window so that i can modify just that portion of the original files properties - it still functions that way on a friends machine - was just kinda weird that i can't get it to work that way any more …
-
Why is my project video jittery as I crop and add clips
Why when I crop a video clip and drag it from event area to project area does the project video clips get jittery looking? Am I cropping them wrong or doing something? Or is the format wrong. I have always cropped and added bits of the video from event to the project area and this hasnt happened before. Please help! Thank you in advance for your time and expertise.
Blessinsg CindyThere is no way to trouble shoot this problem without comp details or a screenshot. The only guess I can make is that your work area is set to 10 seconds. The other guess is that 10 seconds is the limit of your ram preview because of system resources.
-
Resizable and drag & drop window
Hi!
I need to build a window with title bar and close button to
display an internal movieclip (mc is in the same movie). Window
must be custom resizable and drag & drop. I don' t want to use
window component. Please, help me. Thanks in advance...Here.
You can work out the rest of the kinks. Good Luck. -
How to understand the "New Item" icon at the bottom of the Project window
I'm trying to understand that small "New Item" box at the bottom of the project window better. I'm aware that when I bring video clips into my project, if I drag them to this box, PPCS5 will add them to the timeline. I partially understand the positive reasons for doing so, primarily that PPCS5 will correctly identify the type of video being brought into the project. I know that if I select all my clips and drag them to the new item box, that all my clips will be added to the timeline at the same time and all together on the timeline. There are many things I don't understand about it. If I add my clips one by one using the "New Item" icon, they will show up as separate sequences on the timeline. If you try to add another clip at a later time, can that clip not be added using the "New Item" box? One other question is what would be the advantage in putting clips on the timeline as separate sequences? And one further question is do you drag other items to this box besides video clips? Like music, and still images?
Dragging something to the New Item icon doesn't just add that something to a sequence. It actually creates the correct sequence for the something to be added to.
You do this once, when you need a new sequence. Anything else you want to add to that sequence you do by other means. -
Multiple glitches, e.g., suddenly can't select clips or precision edit
I suddenly am unable to select clips or parts of clips - the yellow outline no longer appears around the selected frames. When I click on precision edit, the lower screen no longer appears. Have lost a number of edits to a project, for example, the title and parts of clips that I'd already edited have disappeared. Then the program crashed.
I found the latest version of iMovie on the Apple website, downloaded and installed it. I'm now able to select clips and use the precision editor on new projects, but not able to precision edit the project I was working on when it crashed. I will start over again with the project.
-
Audio from video clip and layering
ok, I need help! I finally figured out how to take audio from a video clip and place it over pictures or layer it over other audio. Now, I want to start with a video clip, it happens to be an interview, cut away to some pictures or other muted video, and come back to the interview, all with the audio playing the whole time and lined up correctly....how do i do this? THANKS!!
Thanks David
I found this here http://www.apple.com/findouthow/movies/#tutorial=extendaudio
To extend audio across multiple clips:
1. In the Project area, select the clip that contains the audio you’d like to extend into a second clip. Select the last few seconds of the first clip that contain the audio you want.
2. To split the first clip, choose Edit > Split Clip.
3. Control-click the selected clip and choose “Reveal in Event Browser.”
4. In the Event browser, Command-Shift-drag the clip to extract the audio and place it at the start of the next clip.
5. Delete the video portion of the clip you split in step 2.
Because you’ve extracted the audio from exactly the part of the clip you split, the audio seamlessly plays across the next shot
I am going to try this tonight and see how easy it is -
Double-click and drag don't open image files
Hi,
I'm having problems loading images in Preview and Adobe apps (CS1).
From Finder, I can double click to open an image in Preview but it only opens the first image, and won't load more than one. I've tried changing the preferences to "open groups of images in the same window" or "open all images in one window." Neither solve the problem.
My adobe apps won't open a file when I double click it from the finder at all. I have to use the "open" command from within the application to open an image file.
I am a designer and photographer trying to browse groups of images at once and this is driving me crazy! I have tried copying over different preference files from my old computer (a powerbook G4), and I'm wondering if I either failed to copy the right one or copied something that is interfering with the shortcut actions.
The interesting part is, that the same actions are working fine for other kinds of files -- for example, I can open multiple word documents by double clicking their icons in Finder.
Any suggestions appreciated. Thank you.
Amy HengstHi Amy
What kind of files are these? If I wanted to open multiple images in Preview (be they BMP, JPEG, PSD, whatever) I would select them and drag onto the Preview icon in the Dock which opens the first image in a single window with the remaining images in a 'thumbnail drawer' to the right (like you get with big PDF documents).
On the other hand if I double-click, 10 to 1 it would launch Photoshop which I use as an image editor only, not an image manager or viewer. You can of course change the application which any document uses to open it, with the Get Info window. But if you use more than one application (as I do - PS to edit, Preview to just view), then click-and-drag onto the Dock might be your best bet.
Maybe you are looking for
-
To modify a field in a database table based record identification by primar
hi i want to to modify a field in a database table based record identification by primary key filed and two more fields ie customer (primary key i want to modify record from intenal table the record existing with primary key field customer the status
-
SMC 4.0 doesn't show correct start page after the installation
Hello, after installing SMC 4.0 in a Solaris 10 sparc server it is not possible to get the start page at http://host:6789 I just get in the browser: usage: head [-n #] [-#] [filename...] Copyright � 2007 Sun Microsystems, Inc. All rights reserved. U.
-
Hi, I'm implementing an interface with XI 3.0. In my scenario, I've created one IDOC communication channel. and i try to send some data from file (File --> XI --> IDOC R/3) I am using a XSL mapping to build an Idoc-XML from this input file and I'm fi
-
Is labview able to communicate with softwares that can simulate dynamics?
I am currently trying to use labview for my simulation, but it turns out that i still have a long way to go. And it would really be pain in the a** if i have to make it all in labview. Is there any way that labview can communicate with other software
-
Satellite M50-108: Ram upgrade from 512MB to 1GB
My Laptop model is a M50-108! But i cant see info about this model anywhere, what kind of memory would be best to add to my computer? (512 MB one )! Message was edited by: naturecalls