Project won't load after upgrade to 10.1.3

Howdy,
I'm working on a series of videos, each in a separate project, but all in the same library.
I did the bulk of the editing in 10.1, but recently upgraded to 10.1.3. FCPX did it's usual "update projects and events" routine when I opened the library in 10.1.3 for the first time. All my projects appear to be fine, except one...
This project is about 30 minutes long, with a handful of different clips – nothing huge... but it won't load. I get the spinning beach ball for a few minutes, then a system alert saying I've run out of application memory. I check Activity Monitor, and sure enough, FCPX is using over 12GB of RAM! It seems FCPX gets stuck in some sort of loop while trying to load this project, and I'm not sure what to do about it... Any help would be appreciated.
System info:
iMac
OSX 10.9.5
3.5GHz Core i7
16GB RAM

OK, I think I resolved my issue. I hadn't noticed that there was one missing media file in the project that wouldn't open. I didn't notice because normally, FCPX would open the project and swap a "missing media" icon for the absent file in the timeline, but in this case it simply refused to open the project. I re-imported the missing file, and now there are two of them in my media browser. If I delete any one of them, they both disappear... Odd.
In any case, my project opens now and that's good. What I don't understand is what happened to that missing file in the first place. I didn't delete it or move it. It seems to have been kicked out of the FCPX database upon upgrade to version 10.1.3, which by itself is a little troubling... and I fear there may still be similar database issues that I haven't discovered yet lurking in other projects
Here's hoping all of FCPX's "growing pains" get resolved soon.
Thanks for your help, Russ.

Similar Messages

Old emails won't load after upgrade to Mountain Lion

old emails won't load after upgrade to Mountain Lion

See if anything in here will fix it:
1. Hold down the Command and Option keys as you click the iPhoto icon.
The Photo Library First Aid window opens:

Pogo Games won't load after upgrade to Lion

Upgraded to Lion recently. Everything seems to be working okay, except that I play a lot of games on Pogo.com, and now none of the games will load. I made sure everything (Java, etc) was up to date, but none of it fixed the problem. I tried the games on both Safari and Firefox, and got the same result. Any game I try to open just says "Now Loading (Name of Game)..." and that's all it does.
I went back to an older mac that is still running Snow Leopard, and the games loaded just fine. So I figured it was an issue with Lion.
BUT... on the Snow Leopard computer, I noticed I had an old version of Firefox installed, so I upgraded that to the newest version, and now Pogo games won't load on that either! So, the problem isn't actually Lion. It's the newest versions of the browsers.
I tried contacting EA (pogo) support, but their help page is completely useless. I thought I'd check and see if anyone here has any ideas.
thanks,
Dan

I'm using Fouiny packages for a year (now it's cvs-20060621-1), as he provides ~all of them & they worked without issue ever since. Latest version's getting a bit old
EDIT : known problem with new openssl !
Finally found it here http://bbs.archlinux.org/viewtopic.php?p=192536#192536

Icall won't load after upgrade to ios 5.

I have an ipod touch 4g. I get a screen that says I don't have a microphone attached and the app won't load. Does anyone else have this problem and a fix please.

The iCall app hasn't been updated in almost a year and a half, so it's quite possible that it's not compatible with iOS 5. Support information on their web site is nonexistent - they just have dummy pages which they've not bothered to update - so that doesn't lead to much confidence - so you may need to email or call them:
http://www.icall.com/about/contact
Regards.

Project won't open after upgrade to FCP 6

I upgraded from FCP5 to 6, but now my current 107 Mb project file won't open (and neither will recent older versions of it). As FCP is reading the file, a message appears: "The filter 'shift fields' has been incorrectly applied. Do you want to fix?" Whether I reply yes or no, FCP crashes. There ARE some shift field filters used in the project. Should I open in FCP on another computer and remove all filters (A LOT of work and not guaranteed to find all of them)? An older, smaller project file WILL open.
Help! We're right in the middle of a big job!

Did you ever figure out how to open your file? I have the EXACT same problem - my file is 150MB. Big deadline, flew someone out to work on it and now I'm stuck!

Cd's won't load after upgrade to tiger

I have been unable to load any cd's at all since upgrade to Tiger 10.4.6 from panther, New cd's and old cd's just spin and spin then eject without any error messages or anything.
Even the iwork cd included in tiger package would not load.
The drive reads the Tiger install dvd fine. It appears to not have problems with dvd's???
According to info I do not need firmware update:
PIONEER DVD-RW DVR-104:
Firmware Revision: A227
Interconnect: ATAPI
Burn Support: Yes(Apple Shipped/Supported)
Cache: 2000 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media: No
Please help - Thank you

Hi
Have you tried a simple restart?
Also after any OS update, run Repiar Permissions from Disc Utility on your Boot Volume.
Try from a different User account (create one in SysPref/Accounts, if you only have one account)
Relaunch the Finder
Zap the PRAM
Try a DVD lens cleaning Disc (has two sets of bristles, one for CD, one for DVD), run it multiple times.
Your drive's CD lens may have died; if none of above makes any difference, and CD's of any kind continue to be ejected, I would say it's time to look at a new drive.
The good news where that is concerned is that replacement "OEM PC" bare drives (DVR-111D or ND-3550A) are only $40 or less online.

ITunes store won't load after upgrading to iTunes 9

Ever since I upgraded my iTunes to the new iTunes 9, I can't get iTunes store to load. I've gone through the troubleshooting, and even ran a repair iTunes and then uninstalled and re-installed the iTunes. Nothing has worked. It only loads part way with just blue boxes with ? marks in them and names of songs/artists. Plain white background and none of the links that do show go anywhere. I get this message when I try to click on a link: We could not complete your iTunes Store request. An unknown error occurred (306). There was an error in the iTunes store. Please try again later.

My daughter has iTunes 8.2.0.23 on her laptop and she could sign in with her own id and my id - so obviously there is a problem with version 9
I've uninstalled iTunes 9 and Apple Mobile Device Support thru Add/Remove programs
Installed iTunes 8.2.1.6
Removed library file made in version 9
Opened iTunes 8.2.1.6 and successfully signed into iTunes Store
Still cannot get onto iTunes via a Touch or 2 iPhones!!!
Added all my music back onto iTunes and it is working PERFECTLY
WON'T be upgrading to version 9
Hope this helps
Message was edited by: Lesley C

Gmail won't load after upgrade to 3.6.9

Since upgrading to 3.6.9, gmail hangs while loading. The progress bar moves to 99% and then sits there. Gmail works in basic HTML mode, but not in normal JavaScript mode. Eventually, gmail time out and says "This is taking longer than usual". Looks like Ajax call never completes.

I just had this happen to me with FF 3.6.10 in my normal profile. If I ran in "Private Browsing" mode or another browser, it was working. The cause was my browser cache. As soon as I cleared my cache this worked again for me.

Photo Booth won't load after upgrade to Leopard

I just upgraded 4.5 year old iMac from Tiger (10.4x) to Leopard (10.5.8) and now Photo Booth (v.2.0.3) doesn't load. Any suggestions?

Hi BDAqua- Just tried your suggestion and got nothing while launching Photo Booth, but there were messages from earlier attempts. I'm going to attach a screen capture here of Console to see if you can understand them.
To give you a little more info, The Photo Booth screen appears on my daughter's iMac, but she just gets the spinning beach ball so we force quit.

Motion 4.0.3 won't load after upgrade to FCP 7

Hello,
I recently upgraded my OSX to Snow leopard. It won't let me open Motion 4.0.3 which is bundled with FCP Studio 7.
Any suggstions?
1st generation Intel (2006) Mac Pro
Model Name:          Mac Pro
Model Identifier:          MacPro1,1
Processor Name:          Dual-Core Intel Xeon
Processor Speed:          2.66 GHz
Number Of Processors:          2
Total Number Of Cores:          4
L2 Cache (per processor):          4 MB
Memory:          16 GB
Bus Speed:          1.33 GHz

"I opened the hood and reconnected all the wires differently and now my car won't start."
Well, a lot depends on the amount of damage that you've done. Hopefully, the changes you made are slight and you can put everything back the way that it belongs. However, based on your post, I suspect that such is not the case. I suggest...
http://docs.info.apple.com/article.html?artnum=107947

AE, PR, EN, and AME won't load after upgrade to Windows 8 Pro

I was running CS6 on Window 7 Home Premium. I upgraded my system to Windows 8 Pro and those 4 programs hang when trying to load. For AE it hangs at Initialize MediaCore, PR and AME hang at ExporterAVI.prm, and EN hangs once the application launches. I've uninstalled and reinstalled CS6, I'm uninstall Magic Bullet, and I've uninstalled and reinstalled Quicktime. I've also given the program permission through the firewall as listed in the help guide from Adobe. Can anyone assist?
PC Info
Gateway FX6800-01
i7-920 Processor
Windows 8
18GB Ram

I'd 'refresh(charm->change pc settings->general)' or 'remove and reinstall' windows 8 if I were you, since upgrading to w8 from w7 made a lots of errors and BSOD(driver-related) for me. You have to install programs again even if you choose refresh. Sooner or later you'll face some errors... or not.

ITunes won't load after upgrading to Mavericks. Error 13010. I have tried deleting the Genius library file, still no luck.

I found some feeds where people had deleted the genius library .itdb and were able to fix the problem. It did not fix mine. Still unable to access iTunes!

The option key... I've been holding down the command key... No wonder that didn't work. I should really be writing this stuff down!.
Regardless, Downloading and reinstalling iTunes did the trick.
Thank you mende1 & saffron63 for the assist!

Iphoto 8.1.2 won't open after upgrade to 10.8.2?

iphoto 8.1.2 won't open after upgrade to 10.8.2. I have tried to upgrade iphoto to 9.1 but it won't work.

To upgrade to iPhoto '11 (version 9.x.x) you musdt purchase the upgrade in the App store - that is not a free update.
what happens? What error messages do you get? if it crashes post the first 50 lines of the crash report
LN

IPhoto won't start after upgrade 1.1 for my new iMac. Now what do I do?

Had to upgrade according to screen. iPhoto won't start after upgrade 1.1 for my new iMac. Now what do I do?
I have restarted the computer. Brand new iMac intel. v 10.9.4

You need to upgrade iPhoto for Mavericks. Download the upgrade using App Store.

My apps won't load after updating to iOS4.3.2. What to do?

My apps won't load after updating to iOS4.3.2. What to do?

Yes, I tried that (thanks for the suggestion, though!). In my music app, when I click on certain songs, the screen moves to try to start the song, but then it bounces back to the menu screen without playing the song. On many albums, when I click on the first song, a song about halfway through the album will start to play rather than that first song. My other apps seems to be fixed, but not the music function.

Project won't load after upgrade to 10.1.3

Similar Messages

Maybe you are looking for