Project won't load! Spinning beach ball at opening screen.

So my project is multi-camera, has all externally synced audio, and about 45 min of footage in current timeline. When I created the project, and edited the elements within, all worked fine. But now when I try to reopen the project, I get the spinning beach ball hanging at the opening screen for hours. It just shows "loading project into timeline" forever. It just doesn't want to open. Anyone run into these problems before??
Specs: 2010 mbp, 2.53 ghz i5, 8GB ram, 500GB. OSX 10.8.4

Hi Chris Lee 310,
I'm sorry to hear you are having issues with your Final Cut project.
The article below may be able to help you with this issue.
Click on the link below to see more details and screenshots.
I've quoted some helpful highlights for you:
Final Cut Pro X: Troubleshooting basics
http://support.apple.com/kb/TS3893
7. Hide Events and Projects
You can isolate issues with events and projects by hiding your events and projects and then un-hiding a project or event. Do this one at a time until you are able to reproduce the issue and identify an affected event or project. For detailed information on hiding events and projects see
Final Cut Pro X: Hiding events and projects
http://support.apple.com/kb/HT4740
I hope this information helps ....
Have a great day!
- Judy

Similar Messages

Single Project Won't Load - Eternal Beach Ball - File too large?

I had just finished putting in the last still image in a project in iMovie last night when all of a sudden, my whole computer crashed. Another friend had been working on the same project on my machine and had mentioned that occasionally iMovie would randomly glitch but she didn't mention any crashes.
Now when I try to get to that particular project, I get the beach ball and it never goes away. I eventually force-quit the program.
I've cleared preferences files (which allowed me to load videos again, at first it was just sitting in this suspended state of "loading" but would never do anything) and deleted old movies and projects. This is the ONLY project that won't open.
I have 42.16GB available on my HD so I don't think space is an issue. (I could be wrong.) Again, I had just finished the project when everything went wrong.
I have searched the forums for answers and nothing seems to really match my issue. I've tried their suggestions anyway but nothing seems to be helping. (The deleting of preference files did solve the issue of nothing loading, however.)
I tried to copy the project file onto a disc so that I could maybe switch machines but that proved ineffective.
Help?

In searching other forums, I've seen a plethora of ideas but no real common thread. Someone said that trashing things before a movie is done will corrupt it. I don't believe I initially trashed anythinng necessary for the movie but now I have. Is all hope now lost?

CS6 InDesign Won't Stop Spinning Beach Ball After Opening

My Mac was acting up tonight and it told me some InDesign-related files were damaged in the process. Now when I open InDesign or an InDesign file, I can’t do anything with the application because the beach ball keeps spinning after the application is launched and I have to force quit it. I tried deleting the preference file and uninstall InDesign and install it again and no luck.
Any help or advice would be appreciated.

I just uninstall and reinstall InDesign and saw this error report:
Exit Code: 6 Please see specific errors and warnings below for troubleshooting. For example, ERROR: DF027, DW063 ... -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 3 error(s), 0 warning(s) ----------- Payload: {CFC3110A-491C-4DBF-A97D-66C567600A2F} Photoshop Camera Raw 7 7.0.0.0 ----------- ERROR: DF027: Unable to copy file from "/private/tmp/.tempdirz5ISanI4/Assets1/universal/Camera Raw.plugin/Contents/MacOS/Camera Raw" to "/Library/Application Support/Adobe/Plug-Ins/CS6/File Formats/Camera Raw.plugin/Contents/MacOS/Camera Raw" (Seq 10) ERROR: DW063: Command ARKCopyFileCommand failed.(Seq 10) ERROR: DW050: The following payload errors were found during install: ERROR: DW050: - Photoshop Camera Raw 7: Install failed -------------------------------------------------------------------------------------
System Requirements

Contents of one network folder won't display - spinning beach ball

I have an eMac on a network running 10.3.9 which, even though the user is properly authenticated on the network, it will not display the contents of one single folder. All the other folders' contents display perfectly and the user can interact with the server and its' contents without any problems. All the other users on the network can interact with the folder in question without any problems, which tends to lead me back to a problem on this one eMac.
The folder in question is inside the main share and all the other folders are as well. Again, the user can traverse the directory structure without any problems. She can use any file, read, write, save, change, delete any file without any problems in any folder EXCEPT in this one folder.
When the user tries to access the folder, the result is the perennial spinning beach ball.
I've tried all the usual tricks. Cache cleaning, directory repairs, permission rebuilds, prebinding rebuilds, log file maintenance, etc., etc. to no avail. I'd appreciate your thoughts. Thanks.

Have you tried logging in with any of the other user's credentials from her system?
Also, have you tried a different user account on her system. (With either her or anyone else's login info for the server.)

27 ", late 2010, iMac won't boot after turning on. Spinning beach ball and white screen.

Probably a relatively simple fix, or series of steps, that will return it to normal.

BD,
It's been a while, but I have since upgraded RAM to 12Gb and gone to Mavericks 10.9.4. Everything has run well until recently. Time Machine will not function on a new Seagate, 1TB GoFlex external HD,even though it was properly formatted and HFS journaled. Seagate techs said it seems to be a failing drive, yet it works perfectly on my laptop, a 15" MacBook Pro with Mountain Lion. The drive completes less than 10% of the backup before it locks everything up on the iMac with the spinning beach ball and a gray screen. Left it that way for two days and no change. Removed the drive physically and the iMac works just fine. I am baffled and really a bit frustrated here and wonder if you, or anyone else, has an idea about correcting this? I am suspecting that there is something deeper in the system going on than I am seeing.
I have run a verification of Disc Permissions/Repairs and keep getting this coming up: "Permissions differ on “Applications/Safari.app/Contents/Resources/Safari.help/Contents/Resources/inde x.html”; should be lrwxr-xr-x ; they are -rwxr-xr-x ."
That keeps coming up every time and is not fixed. I don't know if that has anything to do with that.
Baffled...

Spinning beach ball and black screen on my new macbook pro

After great anticipation, I just updgraded to a new macbook pro from an ibook G4. For the most part, I am thrilled and applications open and web pages load quickly. Occassionally, though, I get spinning beach balls...with more frequency than I did with my ibook and in OS X native apps...such as Safari.
Another problem I am having is in Front Row playing movie trailers: the screen goes black before the end of the trailer, but the audio continues.
Any feedback would be greatly appreciated. Thanks!
macbook pro 2Ghz, ibook G4, imac G4, power mac G4 Mac OS X (10.4.5)

That is the automatic ambient light sensor doing it's thing.
Depending on what machine you have, try turning the screen brightness all the way up. It will buttons on the top row, usually the F-1 for dimmer, F-2 for brighter
Also you can go to sytem preferences>display and un check the automatically adjust brightness for ambient light.
Hope this helps

Spinning beach ball, mouse tracks, screen turns to patches of lines

Spinning beach ball appears a lot, mouse leaves a wide track across screen when the computer wakes up, screen turns to lines across it, with desktop visible beneath. Really weird. Anyone have similar symptoms?

Hmmm all I can say is my windows shake without me touching anything and my trackerpad is already disabled!

Spinning beach ball at login screen after upgrading to 10.4.8

Ok, I so used software update to install the 10.4.8 update (I know, big mistake, should have used combo update, etc.), and upon restart can't get past the login screen. After several seconds, the spinning beach ball appears and that's it. Been like that for hours.
Booted into single user mode and ran fsck, says that the volume is fine. diskutil stalls out in single user mode (can't place my hands on the install CD, otherwise I'd use diskutil fron that).
So, ideas?

I had this happen on my wife's iBook G4.. Here's what I did..
Remove the battery.. Unplug the power. Let it sit for a few seconds. (30 to be safe)..
Then plug it all back in
Turn it on and press APPLE-OPTION-P-R immediately after pressing the power button and hold it in for a LONG time.. even after you hear the chime.. keep holding it in for FOUR CHIMES and FOUR initialiations of the CD/DVD drive.
Then let go and let it boot.. you will then see the Apple Grey screen and it should boot normally.. Once it boots, repair permissions immediately.
At least that's what worked on her iBook, exact same problem.
Hope this helps.
Greg

Spinning beach ball when opening CS3

First I wasn't able to connect to any of my sites, now I'm
getting the "spinning beach ball of death" every time I open CS3.
It is completely unresponsive and I have to "force quit" to get out
of the application.

I have been having similar problems on my G4 and on my Intel
Macbook since the end of last week and the only changes to both
systems has been the QuickTime 7.6 upgrade for Leopard.
I have used the sampler in Activity Monitor to see what
Contribute is doing while the Beachball is showing and it is busily
doing nothing, waiting on a variety of events, spinnig its wheels.
As far as Flash Player is concerned, the last update goes
back to October and I have been using Contribute without any
problems since then (up until last Friday).
Any clues?
Pierre

Spinning beach ball when quitting Logic and loading projects

Hello,
Whenever I load a Logic project I get the spinning beach ball. After a while, the project is loaded and it all works, but it is taken way too long to load the plugins. I'm not even talking about big projects, and I have an SSD, so it should be much faster.
The same happens when I quit Logic. Not when I close the project, but when I actually quit Logic. The "Logic Pro" menu in the top left corner of the menu bar in OS X would light up in dark blue when I press CMD + Q, and it would stay like this for 30 seconds or so. The spinning beach ball would appear again during this time. Then it would finally quit.
I have reinstalled OS X and reinstalled Logic Pro X. But the problem was still there. It sounds like a core audio problem, but the problem occurs no matter what my sound output is set to. It happened when the audio output was set to the built-in speakers of my Mac Pro (yes Mac Pro have that!), when it was set to the speakers of the Cinema Display (LED one) and when it was set to my RME Babyface.
I don't think it's a Driver problem because it happened as well when I reinstalled OS X and Logic, and when I tested it on the Macs/Cinema Displays speakers, without the RME Babyface, basically without having installed any drivers or anything yet. So everything was fresh and untouched.
This is a very weird issue. I'm wondering if someone knows what I could do next.
My specs:
Mid 2010 Mac Pro 12-core 2,92 GHz
32 GB RAM
27" LED Cinema Display
OS X 10.9.5 Mavericks
Logic Pro 10.1.1
Thanks a lot

Hi,
thanks for your reply.
Like I said, this is a complete fresh install – I installed OS X Mavericks 10.9.5 from a USB installer, and re-downloaded Logic Pro X from the App Store. That's all. That means there's no 3rd party plugins, no 3rd party drivers, nothing, just the stock OS X system.
However, I just installed the RME Babyface drivers. But this makes no difference, as the problem was present before as well. I'm just saying that, because it appears in my EtreCheck Report which I will post an the end of this message, so you may be wondering.
I tried to delete the preference files and such before – no change.
Logic started normally (= no message or appeared or anything) while holding down Shift + Control, and also while holding down the Option key. The issue is still there. What would or what should it do if I hold these keys while starting? When I hold only the Control key however, it asked me if I wanted to start Logic without the Core Audio. I clicked to start without it, and then obviously everything worked.
So here's my EtreCheck report. Everything looks normal I'd say?
EtreCheck version: 2.1.8 (121)
Report generated 09. April 2015 16:30:01 MESZ
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    Mac Pro (Mid 2010)
    Mac Pro - model: MacPro5,1
    2 2.93 GHz 6-Core Intel Xeon CPU: 12-core
    32 GB RAM Upgradeable
        DIMM 1
            16 GB DDR3 ECC 1333 MHz ok
        DIMM 2
            Empty
        DIMM 3
            Empty
        DIMM 4
            Empty
        DIMM 5
            16 GB DDR3 ECC 1333 MHz ok
        DIMM 6
            Empty
        DIMM 7
            Empty
        DIMM 8
            Empty
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en2: 802.11 a/b/g/n
Video Information: ℹ️
    AMD Radeon HD 7950 - VRAM: 3072 MB
        LED Cinema Display 2560 x 1440
System Software: ℹ️
    OS X 10.9.5 (13F34) - Time since boot: 4:52:33
Disk Information: ℹ️
    HL-DT-ST DVD-RW GH61N
    HL-DT-ST DVD-RW GH61N
    Samsung SSD 850 PRO 512GB disk0 : (512,11 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh SSD (disk0s2) / : 511.25 GB (494.58 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    ST2000DM001-1ER164 disk1 : (2 TB)
        EFI (disk1s1) <not mounted> : 210 MB
        Macintosh HDD (disk1s2) /Volumes/Macintosh HDD : 2.00 TB (2.00 TB free)
USB Information: ℹ️
    General UDisk
    Apple, Inc. Keyboard Hub
        Logitech Apple Optical USB Mouse
        Apple Inc. Apple Keyboard
    Apple Inc. Apple LED Cinema Display
    Apple Inc. Display iSight
    Apple Inc. Display Audio
    RME Babyface (23483046)
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Library/Extensions
    [loaded]    de.rme-audio.driver.RMEFirefaceUSB (2.05 - SDK 10.9) [Click for support]
Problem System Launch Agents: ℹ️
    [failed]    com.apple.uhfu.ledcinemadisplayaudio.plist
Launch Agents: ℹ️
    [running]    de.rme-audio.RMEfirefaceUSBAgent.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Programm (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
    Default Browser: Version: 537 - SDK 10.9
    QuickTime Plugin: Version: 7.7.3
3rd Party Preference Panes: ℹ️
    None
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
         1%    WindowServer
         1%    Logic Pro X
         1%    coreaudiod
         1%    fontd
         1%    sysmond
Top Processes by Memory: ℹ️
    241 MB    Logic Pro X
    137 MB    mds_stores
    137 MB    Safari
    103 MB    com.apple.WebKit.WebContent
    103 MB    WindowServer
Virtual Memory Information: ℹ️
    29.92 GB    Free RAM
    2.07 GB    Active RAM
    573 MB    Inactive RAM
    1.77 GB    Wired RAM
    491 MB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Apr 9, 2015, 11:37:27 AM    Self test - passed
EDIT:
Okay, apparently there *is* a little problem. This part here:
Problem System Launch Agents: ℹ️
    [failed]    com.apple.uhfu.ledcinemadisplayaudio.plist
I believed this was normal because my audio output was set to the external USB audio interface when I ran the test, but I ran it again with the sound output set to the Cinema Display, and this message still appeared. When I click the Information symbol, it says:
These are low-level parts of your operating system, usually provided by Apple, that run in the background while a user is logged in. Any failure that appears here may indicate a problem with your system.
I can't tell if there's a link to my Logic problem, however.
PS: I just remembered that I installed a system update for the LED Cinema Display which I downloaded from the Apple Support page. Maybe it has to do with that. It may have been an old update that was not needed.

Can't seem to get rid of Spinning Beach Ball in Mail

As someone else put it... it seems that Yosemite is Apple's VISTA. Mail is fast becoming my most annoying App because clicking on almost any email seems to send the signal for the Spinning Beach Ball to appear. Looking at activity monitor, it says that Mail is Not Responding, and then after a minute or two, the email finally opens.
I'm thinking that perhaps Apple isn't testing Yosemite on older iMacs like mine, a circa 2007 (?) iMac7,1 identifier currently trying to run Yosemite OS X v.10.10.1 on my Intel 2.8GHz Core 2 Duo running 6 GB 667 MHz DDR2 SDRAM. Mail is one issue, I'm also seeing Multiple IP Address issues. I'm trying to purge EMAils especially those that have images in them... figure I'll part the images on a USB HDD, and delete all those actual emails. Even that is tough because the minute I highlight
Is there any fix for the spinning beach ball issue?
Mike

OK, here's my current Etrecheck. Maybe somebody can decipher this and give me a clue on how to resolve my problems. I should not that I no longer have Elgato's EyeTV but I'm unsure about the correct method used to remove software like this, especially if there's no uninstall program that completely removes any references to it. I did run the activity monitor and it seems like Kernel Task (?) is at the top of the list (Shows 541.1MB now) all the time when I select the MEMORY column. There's 6.0 GB installed, 5.96 GB Used, Virtual Memory 6.28 GB, Swap Used is 59.5 MB, App Memory 4.33 GB, File Cache is 910.4 MB, Wired Memory 666.9 MB, and compressed is 96.8MB.
Problem description:
Spinning beach ball when opening or responding to emails, web pages very slow to open, multiple computers using my IP address.
EtreCheck version: 2.1.1 (104)
Report generated December 7, 2014 at 2:19:38 PM EST
Hardware Information: ℹ️
iMac (24-inch Mid 2007) (Verified)
iMac - model: iMac7,1
1 2.8 GHz Intel Core 2 Duo CPU: 2-core
6 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR2 SDRAM 667 MHz ok
BANK 1/DIMM1
2 GB DDR2 SDRAM 667 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
ATI,RadeonHD2600 - VRAM: 256 MB
iMac 1920 x 1200
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: one day 23:48:17
Disk Information: ℹ️
ST3500630AS Q disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 499.25 GB (150.13 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
YAMAHA composite_device
Logitech USB Receiver
Apple Inc. Built-in iSight
MICRONET FANTOM DRIVE 2 TB
S.M.A.R.T. Status: Verified
EFI (disk1s1) <not mounted> : 210 MB
Grafix-2TB (disk1s2) /Volumes/Grafix-2TB : 2.00 TB (1.92 TB free)
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Firewire Information: ℹ️
LaCie d2 quadra (button) 800mbit - 800mbit max
S.M.A.R.T. Status: Verified
EFI (disk3s1) <not mounted> : 210 MB
1TB TimeMachine (disk3s2) /Volumes/1TB TimeMachine : 999.86 GB (10.50 GB free)
Configuration files: ℹ️
/etc/hosts - Count: 2
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Application Support/Roxio
[not loaded] com.roxio.TDIXController (1.7) [Support]
/Library/Extensions
[not loaded] com.Logitech.Unifying.HID Driver (1.3.1 - SDK 10.8) [Support]
/System/Library/Extensions
[not loaded] com.FTDI.driver.FTDIUSBSerialDriver (2.2.14) [Support]
[not loaded] com.elgato.driver.DontMatchAfaTech (1.1) [Support]
[not loaded] com.elgato.driver.DontMatchCinergy450 (1.1) [Support]
[not loaded] com.elgato.driver.DontMatchCinergyXS (1.1) [Support]
[not loaded] com.elgato.driver.DontMatchEmpia (1.1) [Support]
[not loaded] com.elgato.driver.DontMatchVoyager (1.1) [Support]
[not loaded] com.keyspan.iokit.usb.KeyspanUSAdriver (2.5) [Support]
[not loaded] com.prolific.driver.PL2303 (1.2.1) [Support]
[not loaded] nl.bjaelectronics.driver.PL2303 (1.0.0d1) [Support]
/Users/[redacted]/Downloads/LCC Installer-1.app
[not loaded] com.Logitech.Control Center.HID Driver (2.6.0) [Support]
Startup Items: ℹ️
EyeConnect: Path: /Library/StartupItems/EyeConnect
HP IO: Path: /Library/StartupItems/HP IO
ProTec6b: Path: /Library/StartupItems/ProTec6b
Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
[loaded] com.adobe.CS4ServiceManager.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
[not loaded] com.thinkyhead.TabletMagic.plist [Support]
[loaded] org.macosforge.xquartz.startx.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.adobe.versioncueCS4.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
[loaded] org.macosforge.xquartz.privileged_startx.plist [Support]
[running] org.samba.nmbd.plist [Support]
[failed] org.samba.smbd.plist [Support] [Details]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[loaded] com.divx.agent.postinstall.plist [Support]
User Login Items: ℹ️
iTunesHelper UNKNOWN (missing value)
AdobeResourceSynchronizer UNKNOWN (missing value)
Logitech Registration UNKNOWN (missing value)
Logitech Control Center Daemon ApplicationHidden (/Library/Application Support/Logitech.localized/Logitech Control Center.localized/LCCDaemon.app)
ConnectService Application (/Library/Application Support/ArcSoft/Connect Service/ConnectService.app)
WDQuickView Application (/Incompatible Software/WDQuickView.app)
Internet Plug-ins: ℹ️
DirectorShockwave: Version: 11.0.3r472 [Support]
Google Earth Web Plug-in: Version: 6.1 [Support]
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.4.1.4 [Support]
OVSHelper: Version: 1.1 [Support]
Silverlight: Version: 4.0.60831.0 [Support]
FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 [Support]
DivXBrowserPlugin: Version: 2.2 [Support]
Flash Player: Version: 15.0.0.239 - SDK 10.6 [Support]
iPhotoPhotocast: Version: 7.0 - SDK 10.8
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 9.5.5 [Support]
O3D: Version: 0.1.42.3 [Support]
JavaAppletPlugin: Version: Java 7 Update 71 Check version
Safari Extensions: ℹ️
Ultimate
Wondershare Player-1
ClickToFlash
DivX Plus Web Player HTML5 <video>
3rd Party Preference Panes: ℹ️
Adobe Version Cue CS4 [Support]
DivX [Support]
Flash Player [Support]
Flip4Mac WMV [Support]
Java [Support]
Logitech Control Center [Support]
Perian [Support]
TabletMagic [Support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 499.25 GB Disk used: 349.11 GB
Destinations:
1TB TimeMachine [Local]
Total size: 999.86 GB
Total number of backups: 158
Oldest backup: 2012-03-30 18:06:15 +0000
Last backup: 2014-12-07 18:52:43 +0000
Size of backup disk: Too small
Backup size 999.86 GB < (Disk used 349.11 GB X 3)
Top Processes by CPU: ℹ️
      13% Console
      10% mds
      5% WindowServer
      4% Mail
      2% Activity Monitor
Top Processes by Memory: ℹ️
425 MB Adobe Photoshop CS4
232 MB Mail
180 MB Finder
161 MB softwareupdated
161 MB Pref Setter
Virtual Memory Information: ℹ️
61 MB Free RAM
2.82 GB Active RAM
2.75 GB Inactive RAM
702 MB Wired RAM
12.87 GB Page-ins
26 MB Page-outs
Diagnostics Information: ℹ️
Dec 7, 2014, 10:11:59 AM Pref Setter_2014-12-07-101159_Mikes-iMac-9.cpu_resource.diag [Details]
Dec 5, 2014, 06:43:21 PM Adobe Photoshop CS4_2014-12-05-184321_Mikes-iMac-9.cpu_resource.diag [Details]
Dec 5, 2014, 02:31:56 PM Self test - passed
Dec 5, 2014, 02:18:49 PM Adobe Photoshop CS4_2014-12-05-141849_Mikes-iMac-9.cpu_resource.diag [Details]
Nov 19, 2014, 02:53:27 PM Kernel_2014-11-19-145327_Mikes-iMac-9.panic [Details]

Lots of spinning beach balls

Hello,
I have a Mac mini G4 (see specs in signature) and it worked fine a for a while until at one point a month or two ago, there was something wrong with the file directory or something so I had to do a complete zero erase and install. It worked fine for a while, but lately everything I do has been causing me to see more and more of the dreaded spinning beach ball. For example, clicking on "log in" on the apple discussion page brought about the spinning beach ball. Opening a new window can sometimes bring a spinning beach ball. Even in iChat it will randomly show me the spinning beach ball. iTunes as well has been giving me plenty of grief so much that I can't even listen to music on my computer because it will freeze and the seconds in the song will stop moving and then it plays for a bit and then stops again. I don't know what's wrong with my computer. In the Activity Manager it says I have 660 MB free memory and I have a 94% idle CPU. It's not dusty and it doesn't feel hot, in the iStat Pro widget it says the HD is at 119 degrees Fahrenheit. What the heck is wrong with my computer? It is really frustrating to not be able to even play an MP3 on my computer or have Safari freeze just because I opened a new window. The strange thing is that it always comes back, as in, when it freezes, I just have to wait a little bit and then it starts working again. So far I have tried repairing the disk permissions, repairing the disk, running "sudo periodic daily weekly monthly" and even running AppleJack in "deep clean" mode. Please, any help would be vastly appreciated.
P.S. As I was writing this, I got the beach ball twice.
Message was edited by: el pinguino

There are a number of possible issues that could cause this other than the ones you appear to have attempted to deal with so far.
The most obvious is an issue with Fonts - Macs are sensitive to font conflicts in particular, though some fonts cause problems even with no conflicts. Open Font Book and get it to check and resolve conflicts, then go through the font families and turn off what you absolutely don't need (even if only to run the system for a day or so to see if it helps - they can be turned on again when needed).
Next obvious is prebinding, though with a newly reinstalled system that shouldn't be a problem. Try to update prebinding anyway, just to rule that out.
Also ensure that permissions are repaired and remove all caches. Applejack does this, though personally I prefer YASU. After that is done, then use Disk Utility to check the boot drive (you'll need to boot from another MacOS volume such as the original install disk to effect repairs if needed).
After that, it's possible the issue is a damaged property list file, so grab a copy of Preferential Treatment and scan both user and system levels. Delete anything it flags as a problem.
Lastly (for now at least), create a new user on the system and log into that to see if that user suffers the same issues.

Solution to iPhoto spinning beach ball for Book projects with too many unplaced photos

A few days ago I discovered the solution to this problem for a client using iPhoto 9.5.1 in OS X Mavericks 10.9.4.
=====
TRIED ALL KNOWN SUGGESTIONS BUT NONE HELPED
My client had already tried repairing, rebuilding etc. the iPhoto Library, and I tried OS X's Disk Verify and Repair Permissions plus emptied the cache folder in system Library and in the hidden user Library folder (option-key "Go" menu, Library). None of this helped.
CLUE TO PROBLEM
I noticed several of her iPhoto Book projects each had thousands of "unplaced" photos. In each of those cases, each Book project only had 10-50 "placed" photos used to order the book but thousands of "unplaced" photos. In a Book project, clicking on the bottom-right corner's "Photo" icon-button caused an extremely long lasting spinning beach ball making iPhoto unusable for long periods.
I discovered the problem by clicking once on an existing Book project's name in the left column of iPhoto, then letting go of the mouse with its arrow cursor hovering over the selected Book project name. Within 1-7 seconds, a little pop-up appears listing the total number of photos (placed + unplaced) in that Book project. For many Book projects, the total number was just several more photos than the number of "placed" photos, e.g., a Book with 25 photos showed "(37)" in the pop-up info by the hovering stationary mouse, meaning 37 total photos (placed + unplaced) are associated with that Book project.
BUT...
...some projects listed over 5,000 (five thousand) photos associated with a single Book project that had only placed 20-40 photos in the final printed book. One Book project had 6,070 and several other small book projects showed over 1,000 photos. In each Book project with a mass of unplaced photos, clicking the bottom-right "Photo" icon-button caused a very long-lasting spinning beach ball, almost certainly because iPhoto struggled to build a huge list of thumbnails for the mass of unplaced photos.
My client didn't understand how to efficiently add photos to a new Book project and was clicking on the pull-down menu in the right column that appears after clicking the Photo icon-button within the Book project. From the menu she chose "Last import..." or other menu choice that added a mass of "unplaced" photos to the Book project.
She didn't realize that after creating a new Book project, she could simply drag an individual photo or multi-selected group of photos or an event or "faces" group from its respective library section and drop it onto the Book project's name in the left column, thereby adding only a small group of "unplaced" photos.
USER SOLUTIONS
=====Delete mass of "unplaced photos" within a Book project
This works best for cleaning up smaller number of unplaced photos from completed Book projects.
Problems with solution:
- if the number of unplaced photos is huge, e.g., 6,070, the list of unplaced photos won't appear for a long, long time if ever.
- even if the list of unplaced photos finally appears, there's no way to select more than one thumbnail at a time, i.e., command-a for Select All doesn't work, nor do shift-clicks and command-clicks for multi-item selecting. You must click one photo then tap the "delete" key on your keyboard repeatedly and fast for this to be practical (note: delete key presses are cached here (meaning accumulated until it catches up processing them later); tapping the delete key like mad then waiting for iPhoto to catch up takes lots of patience.
====Delete an entire existing Book project containing a mass association of unplaced photos
This is practical if you've already printed your Book project and no longer need it. My client chose this method for Book projects with a mega mass of unplaced photos.
Problem with solution:
- for incomplete Book projects in progress with a mass of unplaced photos, you'd have to start over after deleting the whole thing.
NEED FOR IMPROVED IPHOTO FEATURE(S)
(1) The existing "Clear Placed Photos" button within a Book project might be useful, but it'd be even better to also have a button to "Clear Unplaced Photos,” and this button should be available outside of the section that struggles to display thumbnails of large numbers of unplaced photos. Clicking "Clear Unplaced Photos" would do the trick.
(2) An additional iPhoto behavior might help: iPhoto should warn with an option to cancel when adding a mass of photos to the "unplaced photo" section if the number of photos exceeds ??? (400??).
(3) Add another choice to iPhoto’s special startup Administrative window (Repair, Rebuild, etc.): "Remove unplaced photos from existing projects. (Doesn't destroy any photos in Library)"
Whew!

Like I mentioned in the post, corruption was probably ruled out by running all the Admin features at iPhoto startup (e.g., Rebuild, etc.). I also stated in my post that I also ran a Disk Verify and Repaired Permissions in OSX (via Disk Utility). I also emptied system Library cache files as I stated in my post.
I was paid to figure out the solution and am not getting paid to troubleshoot for Apple. The more unplaced photos there are in a Book project, the longer it takes to build thumbnails. It's an old general problem in computing when building lists on the fly.
The delay happened for all Book projects with lots of unplaced photos (almost*** certainly more than Apple imagined a user would use), and the beach ball delay was proportional to the number unplaced photos, which super large numbers of photos.
I very much doubt photos are corrupt. But Apple will probably figure it out. It was EASILY reproducible. Try it with different number of unplaced photos known not be corrupt (they display fine elsewhere and iPhoto's and Disk Utlity's admin Verify, Repair etc features show no problems).
I'm done with this.
My client's iPhoto works well now and she knows how avoid placing exorbitant numbers of unplaced photos into her project. I'm not getting paid to answer all this, so good night.
=======
***"Science is the outcome of being prepared to live without certainty and therefore a mark of maturity. It embraces doubt and loose ends."
— A. C. Grayling

Safari won't open... spinning beach ball

Out of the blue this morning, Safari won't open. I click it, the icon bounces, and then I get the spinning beach ball. If I go to the Force Quit Applications window, it says it's not responding. Any ideas what may be causing this and how to fix it?
-B

What is the exact wording of the message you see, and what are you doing when you see it?
These are the steps I took this morning, again, along with the wording. Before these steps, I logged into my account through the Google browser, and verified that I had a purchase in October of OS X Lion:
1 - booted computer under recovery.
2 - Disk Utility - Repair Disk (Result: The Volume New Macbook appears to be okay)
3 - Disk Utility - Repair Disk Permissions - (Result:0 Repaired - Permissions Repair Complete)
4 - Reinstall Mac OS - "Your computer's eligibility will be verified with Apple - OK
5 - "To Continue, you must agree to the terms and conditions" - Agree
6 - Select New Macbook - Install
7 - signing into Apple Store (Result: This Apple ID has not purchased Lion)
8 - rebooted and tried to launch App Store - back to spinning beach balls, along with all other internet apps; Safari, Mail, App Store, iTunes, etc.
Aps not affected: Google Chrome, Outlook (as long as I don't click on an email connected to an HTTPS server) and anything not on the internet.
I hope this helps and thank you for your advice. I wish I could use my Snow Leopard disks; my dvd drive is broken.

10.6.8 update won't install gets half way through then just freezes spinning beach ball for 4 hours any ideas y. Tried and restarted 3 times already does the same thing each time have to hold down the power button to restart

10.6.8 update won't install gets half way through then just freezes spinning beach ball for 4 hours any ideas y. Tried and restarted 3 times already does the same thing each time have to hold down the power button to restart. Anyone can help

Ok will check, as of right now I have 82.57gb free, that's plenty of space will check the disk though using disk utility. Also I am now downloading the update from the apple website instead of going through software update

Project won't load! Spinning beach ball at opening screen.

Similar Messages

Maybe you are looking for