Project Won't Open - End of File error

I have an Encore CS4 project that uses Dynamic Link to an HD Premiere Pro CS4 project and I completed it and burned a DVD 2 months ago. Now I am trying to open the Encore project so I can transcode to Blu-ray, but after 10 minutes or so I get the "End of File" error message. So I can't open the project to change anything. Thoughts?

I had already opened the project in PPro, rendered it completely, closed it and tried again. No luck. But then I went into the Encore project folders: Sources/Transcodes and deleted the PPro project folder containing all the transcodes. Then the Encore project opened (without these transcodes). That was fine because they were the DVD transcodes and I am now building a blu-ray image.

Similar Messages

Encore CS6 project won't open "end of file" error

Hi everybody,
Today I was testing taking a Blu-Ray authored project and down-converting to a DVD. Before doing that work I decided to do a SAVE AS to duplicate the project so as not to screw up the project I had already started. While doing the SAVE AS Encore hung up and I had to force quit. Now I'm getting this error when I try to open the original project again:
"endoffile"
I can't seem to figure out a way around this. I really need this project back because of all the time I took reformatting the text subtitles in it! Does anybody have experience with this project error?
-JD

Rule of thumb for Encore is that you are unlikely to recover from a corrupt project.
If you could figure out what file is the problem, and it was one you could repair, that might work, but what are the chances...?
That said, see this for windows:
Troubleshoot damaged projects in Encore on Windows
http://kb2.adobe.com/cps/406/kb406006.html
No similar version for Mac, but see this:
Troubleshoot system errors and freezes | Adobe software on Mac OS 10.x
http://kb2.adobe.com/cps/824/cpsid_82414.html

Edge project won't open. HTML file is empty. HELP!!

I've been working on a project for nearly a month now and when I opened the .an file today it says it can't fine the associated html file even thought it's in the same folder. So I opened the html file in my text editor and it's BLANK. All the code is gone. Same for the edge.js and edgeActions.js files. I can try and piece together the html file from other test files I have, but the stage class (EDGE-205613315) is dynamically generated I assume. So I couldn't just come up with that.
Anybody have a way to get the .an file to rebuild the html and js?
Please??

There's really nothing to look at. When I was talking to Adobe, I realized that the .an file is showing a file size of zero bytes, so as far as I can tell, the project erased itself when I was saving and restarting. When I open the html file in Edge, it looks like a brand new file - there aren't any elements, symbols, actions or anything. Blank canvas.
Before I left work yesterday, I altered the html file by adding a header and footer div above and below the <div id="stage"> code. The page was running fine in my browser with those divs intact, and the .an file appeared to be saving just fine. Can adding that code have corrupted it somehow? Seems really odd to me that it would totally wipe all the associated files. But if that's an issue, then I need to find another way to build my full page around the edge file.
Thanks for trying to help.

Inconsistent "End of file error" on "open for access "myFile.txt"

I have a script that accesses a txt file containing info needed for values in the script. Sometimes the script works flawless, but once I get the "End of file error," it won't work right anymore unless I log out and log back in or if I dump the file and rewrite it. Below is a copy of the portion of script having the problem:
+set _fileRef to open for access "Library:Preferences:MyTextFile.txt" with permission+
+ set ReadMyTextFile to read _fileRef as string+
+ close access _fileRef+
Is there a way to reset the "End of file" status so that I can access it later with the same script in one login session? I have a feeling that the first time it opens, that it reads to the end of the file and then closes the file. When it opens again the script starts to read where it left off at the end of the file. Does that sound right?
Any help would be great.

OK, it looks like if you are going to use the open for access..close access, you need to keep tack of the EOF yourself, so you can just read to the EOF - for example:
<pre title="this text can be pasted into the Script Editor" style="font-family: Monaco, 'Courier New', Courier, monospace; font-size: 10px; padding: 5px; width: 720px; color: #000000; background-color: #E0E0E0; overflow: auto"> set TheOpenFile to open for access (choose file)
try
set SomeText to paragraphs of (read TheOpenFile to eof as text)
close access TheOpenFile
on error
close access TheOpenFile
end try
choose from list SomeText with prompt "File text:" with empty selection allowed
</pre>
If there isn't any particular reason to explicitly open and close the file, you can use something like:
<pre title="this text can be pasted into the Script Editor" style="font-family: Monaco, 'Courier New', Courier, monospace; font-size: 10px; padding: 5px; width: 720px; color: #000000; background-color: #E0E0E0; overflow: auto"> set SomeText to paragraphs of (read (choose file) as text)
choose from list SomeText with prompt "File text:" with empty selection allowed
</pre>
In the above examples I used paragraphs of in order to use the choose from list, since it displays stuff like this a little bit better - see this article for a tutorial on file read/write in AppleScript.

My Robohelp html 8 project won't open after one warning and error message

I'm currently using Robohelp HTML 8 and when I open my project I first get the following message:
After I click OK, I get this error message:
The project won't open after that. When I look ate my files they seem to be intact even though the message says the folder is missing from
Your help is greatly appreciated.
Thank you,
Joy

Hi Joy
Unless I'm mistaken, K would be a network drive, no?
Unfortunately RoboHelp is only one of a host of applications that doesn't fare well if you try to make edits to a project while it resides on a network drive.
Try copying the project to your local C drive. Perhaps create a folder named Projects and copy your project to a folder named Primo Intranet inside that folder so it looks like this:
C:\Projects\Primo Intranet
Once you do this, try opening your project again and you will likely have better luck.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

End of file error on previously opened Raw files.

I recently had an external hard drive get damaged. Many raw files were able to be recovered but when I go to open ones I had previously manipulated in ACR I get an end of file error. It seems it's only on the previously used photos...is there a way to recover them so I can re-edit them?

You might try IfranView - it's free. It will open corrupt images and you can visually see the extent of the corruption, e.g. 90% of the image might show, with garbage showing at the bottom.
You could then crop the image and use that - losing the corrupt part.
You should also consider using a cloud storage service like dropbox, google drive, box.com, Creative Cloud etc. to backup your images.
I'd try to refrain from working from an external drive.

HELP! 'unexpected end of file' error-Is there a fix?! OS 10.4.11

Getting 'Unexpected end of file' error when trying to open a file (that's a rush job) in QuarkXpress 6.5. I attributed it to lack of memory, so I immediately backed up all files and HD to an external drive to free up space. Restarted and prayed... Quark launched, but file won't open. Same error.
Have: 2.1 GHz PPC G5, 1.5 GB DDR2 SDRAM OS 10.4.11 (pre Intel)
Capacity: 232.8GB, Available: 163GB, Used 69.6GB
Have been searching help site for 5 hours looking for answer and am DESPERATE! I saved changes regularly, but can't access this file at all... I've lost 2 full days & nights working on this project that has to be done in 2 days.
Ran Disk Utility, but no success opening this specific Quark file (Quark will launch- it's just this file that's affected). Have tried to down load Applejack, etc. but keep finding out they only support OS 10.5 or higher. (Haven't been able to afford upgraded system since Intel requires purchase of full verions of graphics software instead of upgrades to the tune of $6k).
PLEASE, I only know enough to be dangerous, so ANY help is GREATLY APPRECIATED!
Savvy folks- if I'm in the wrong place, please send me a link where I can solve this personal catastrophy.
Many thanks-in-advance

I think you best do over your work from scratch. You need to make backup copies of the files regularly. You need to have copies on multiple disks or flash drives.
I saved changes regularly
You should know that this isn't sufficient. You need to have multiplte copies of the file. Backup anyone? Could be the file structure got messed up. Could be Quark messed up the file.
You need to get a newer machine. G5's are not reliable any more. Need to see if Quark will run in compatiblity mode on an intel machine. You should at least get an external firewire drive from owc. Old hd's are not reliable.
Boot in safe mode. Hold down the shift key when powering on the machine. This will run a disk repair program. Boot up will take longer as the harddrive is scanned and repaired.
See this article:
http://docs.info.apple.com/article.html?artnum=107393
Or from:
    mrtotes article :
    Boot from the OS X Install disk and from the Menu Bar choose Disk Utility. Then run "Repair Disk" and "Repair Disk Permissions" on your hard disk.
    a brody:
    https://discussions.apple.com/docs/DOC-1689
Here the apple article on booting single user mode and using fsck. See the section on Use fsck:
http://docs.info.apple.com/article.html?artnum=106214
I suspect not but Perhaps Disk Warrior will be of some help:
http://www.alsoft.com/DiskWarrior/
Robert

Photoshop CS4 "Cannot save due to an end-of-file error" Help

This problem occurs daily, probably 15-20 times per project. I take on normally 3-4 projects per day, so you can see how annoying this is. Basically when I'm saving, I get a dialogue box that says "Cannot save your file due to an end-of-file error" or something to that extent. I would love to resolve this, this problem is persistent and it's driving me out of my mind I'm saving to a network, if that has any correlation. Thanks in advance
     Chris

This is the boilerplate text often used in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files. Working across a network is not supported.
See:
http://kb2.adobe.com/cps/406/kb406793.html
Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
     Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work.   It should.
    Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
When problems arise, a lot of valuable work can be lost.

End of file error, elements 12

I've recently started getting an 'End of file' error when I try to open around a third of my RAW files in Elements 12.
Very frustrating, as I've some decent photo's, and means I'm taking having to take photo's twice to compensate, not ideal. I wondered if it may be a space issue, so have deleted lots of files from my Toshiba laptop, and in particular edited files that use up more space. This hasn't helped though so I'm pulling my hair out.
Any help would be greatly appreciated, thank you.

Yes, definitely, the GB Project file is corrupt, delete it, empty the trash, and it would be a good idea to run some kind of disk repair program, even if it's just Disk Utility. Then create a new project file.
Good luck --HangTime [Will Compute for Food] B-|>

HT201210 Just updates itunes software on my windows PC and now it won't open because of Runtime error R6034 can you help?

Just updated itunes software on my windows PC and now it won't open because of Runtime error R6034 can you help?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Photoshop CC won't open or create files in Windows 8.1 Pro

When I open up Photoshop CC 2014, the program won't open or create files... it just sits there. No error message of any sort. This happens when opening from within the program and from opening through windows. I installed CC as soon as I installed Windows on this computer.
Here's other pertinent information:
Operating System
Windows 8.1 Pro 64-bit
CPU
Intel Xeon E3 1231 v3 @ 3.40GHz 87 °F
Haswell-WS 22nm Technology
RAM
16.0GB Dual-Channel DDR3 @ 799MHz (10-10-10-27)
Motherboard
ASRock H97M Anniversary (CPUSocket) 85 °F
Graphics
HP S2031 (1600x900@60Hz)
1023MB NVIDIA GeForce GTX 650 (PNY) 103 °F
Storage
931GB Crucial CT1000BX100SSD1 (SSD) 76 °F
Optical Drives
hp DVD A DH16AAL
Audio
Realtek High Definition Audio
I've seen lots of other threads of this exact problem. Any help appreciated. Thank you so much!
AC

If CC 2014 starts can you use menu Help>System Info and post that info here.

End of File error on .nef files

I am beginning to see a growing number of my .nef files becoming visually corrupt in the viewer and showing the "end of file" error when opening in PS or any other application.
The corruption does NOT seem to affect the associated .jpg file (if there is one) but I am also NOT able to generate another "clean" .jpg file with the .nef files that have become corrupt.
I hope that I haven't confused everyone - but this issue is rather baffeling in that I can't seem to pinpoint a cause.
My master files are stored as reference files on a server share - all shot with a Nikon D2X.
Does anyone have an idea of what may be causing this - and better yet - is there a way to reverse the corruption?

I do have a number of other systems that I can use to test from. THe file server is a general purpose server in my home running 10.4.x with all of the latest patches, etc.
I am using a SanDisk card reader to ingest directly into Aperture. The corruptness appears to be random.
I am using a Nikon D2X with a number of CF cards, usually 1 or 2GB in size. I capture recording .nef (RAW) images to the CF card.
My workstation is a PowerMac, Dual G5, with 2.5GB processors and 2.5GB of memory. I am using MacOS 10.4.2 with all of the appropriate patches and updates.
The Server is a PowerMac, Dual G5, with 2.5GB processors and 2.5GB of memory. The server is running MacOS 10.4.x Server, again with all of the appropriate patches and software.
The network is Gigabit speed with one switch between my workstation and the server. The Switch is a GSM7224 L2, 24-port 10/100/1000MBps managed switch.
The users in my home (in this case; me) log into any of a number of workstations in my home and authenticate against the server using LDAP. Once authenticated, home directories are available and stored on the server.
This appears to be network related as I can ingest and save locally to the server and open the files without any corruption.

Captivate (5) project won't open in Web Browser

Hello,
Since a few weeks I can't open my projects in the web browser. Accept one of the projects (only questionslides), i have been searching for differents in the setttings but i couldn't find any differtens. When I publish the project in a .swf still the project won't open.
When I will get a preview in Web Browser or publish, the project is opening in the Web Browser and it looks like the project fade in and out in not even a second. A quick view of the background is visible . But i don't get any massage of error of something. And the page turn white.To preview the project in capitvate is no problem.
I hope somebody could help me out.
Roanne

Hello,
I do not know if you have Text Animations in your project? If yes, probably you are having issues due to the latest Flash Player. There is a hotfix to be found in this Captivate blog post:
Solution for Captivate ...
Lilybiri

What causes 'Unexpected end-of-file' error?

Hi,
I am a photographer and an avid Lightroom user. I have two camera's (Nikon D700 and D300) and two computers, a desktop PC and a MacbookPro. Lightroom is installed on both computers.
For the last three photoshoots I have had this problem where 1 in 3 to 1 in 5 images in Lightroom on my desktop PC suddenly gives a 'Unexpected end-of-file' error. First I thought it was my camera. But then I loaded the images onto my MacbookPro and they worked fine. Then I took some images with my other camera, loaded them on to my Desktop PC, and, voila, same problem.
The problem specified: the image stops rendering a preview. A dull preview appears. At the top of the screen the message appears: "An unexpected end-of-file occurred." The histogram window stays empty and the image can not be developed.
I have browsed through this forum some looking for the cause and the fix. There are some mentions of it, but they all date back to 2007.
I run LR 2.2 on Windows XP SP2 and on a MacbookPro with OS X, version 10.5.8.
Please help me understand the cause of this problem, and help me find a fix?
Thanks,
Rogier
Rotterdam, The Netherlands
www.rogierbos.com

While the corruption in your .NEF file could come from any one of a number of sources, here is a way to recover at least some of the information if you own Adobe Acrobat. Your .NEF file should contain a smaller JPEG file created by your Nikon camera when the picture was taken. Even if the .NEF file is corrupt, the JPEG may well be intact, and you can tell that's the case if a preview is visible in Lightroom or Bridge.
If you try to print it from Bridge or Lightroom, though, you will get an error. You can get around this by loading up a CODEC that will let you preview the files in Windows Photo Gallery. Nikon has one available for download to use with Vista x32 at http://www.nikonimglib.com/nefcodec/index.html.en, but it doesn't support Vista x64, so if you're running that (as I am) you'll need a second party CODEC such as the one available from http://www.ardfry.com/Products.htm with a 15-day trial download available. They also have a DNG CODEC which I have not tried.
With that CODEC installed and your system rebooted, preview the damaged NEF file in Windows Photo Gallery. Choose the "Print" option and select the "Adobe PDF" printer. Choose the "Postscript Custom Paper Size" option, and set the dpi resolution to the highest available (4000).
Go to the "Options" link on the bottom right of the window and uncheck the "Sharpen For Printing" box, as you can do this yourself with later processing. Then go to the "Printer Properties" link to see the Adobe PDF settings.
Go to the Adobe PDF Settings tab and choose Default Settings: High Quality Print, which will set the resolution to 2400 dpi.
You want to have Acrobat interfere as little as possible with the output, so select "Edit" from the Default Settings tab, which will bring up the "High Quality Print - Adobe PDF Settings" dialog. Here, turn off the "Optimize for fast web view" check box, then go to the "Images" folder and set the "Downsample" setting to Off and the pixels per inch to 2400. Also, set "Compression" to Off.
If you're going to do this in the future, you can also "Save As ..." your settings for future use with a name like "Fix Bad NEF Files."
Print the file to a designated folder. It won't be quite as good as the NEF file would have been, but at least you haven't lost the shot.

Oraclejsp unexpected end of file error

I am getting an OracleJsp Unexpected End of File error when I use the <logic:present name="add"> <html:form action="myAction" /> </logic:present> tag. "add" is referring to something that was set in a struts action (ie: request.setAttribute("add", "present")). I've even tried a scriplet that checks request.setAttribute and I get the same error. Any ideas? Thanks.

Often, file headers get smurfed. Photoshop is very critical of these headers.
JPEG's seem to be very sensitive to these errors. My trick is to open in a more liberal program, like ThumbsPlus, IrfanView, or PhotoImpact, and then just do a Save, keeping the JPEG compression levels low. This nearly always clears things up for PS.
Good luck,
Hunt

Project Won't Open - End of File error

Similar Messages

Maybe you are looking for