Project X - Turning a Pismo into an iMac
Hi everyone,
Some of you may remember that last year I bought a Pismo with a smashed screen, specifically for the 500MHz processor, RAM and HDD. Well, now I've decided what to do with it - I'm going to make the machine into the world's first TFT iMac G3.
In plain English, I intend to basically bolt the Pismo's logic board assembly to the back of a 15" TFT screen and wire it up to create a desktop Mac. A little ambitious, I know, but it'll be unique. All parts are fully functional bar the screen, so what I really want to do is just reroute the display signals from the built-in LCD to the external. Is there any way I could do this using the internal display connecter, i.e. adapt it to a D-Sub 15-pin connector that would make the external display the primary? I could make do with a wiring diagram for the Pismo's internal display connector.
Failing this, could I disable the internal connector and make the external display connector the primary display without Mirroring?
I would also like to disable the 'Book's battery power system, but removing the Charge card (the thing under the touchpad) results in the machine playing dead i.e. not booting.
I'll most likely build a custom enclosure to hold the workings on the screen (got to find a nice, stylish screen first - anyone got any recommendations? 15-inch, 1024x768 native resolution, reasonably cheap, Apple-like styling?), and try to keep the internal drive bay usable; failing that, I've got a USB drive I can use. The machine runs Tiger 10.4.8 on a 400MHz G3 and 128MB of RAM (and works quite well - I wrote this post on it using Firefox with my CRT monitor and an external keyboard and mouse).
I'll keep you updated of my progress. Wish me luck!
Thanks in advance,
Rob Johnson
Don't worry about taking it apart unless you have an enclosure for it. It doesn't have to be an imac, does it? It would work just fine as a "Mac Mini". Just take the screen off so you have easy access to the power on/off button, plug in a monitor to the VGA Port, and you can use thi built in keyboard and touchpad. If you want it to look even nicer, hide it away, and plug in that keyboard and mouse you were talking about. It would also allow you to have much easier access to the DVD-ROM Drive. If, however, you do decide to go ahead with the rewiring, good luck, as that's not my field of expertise.
Similar Messages
-
How do I get my project to turn my pointer into a hand when the user rolls the pointer over a button?
Please do not double post. It just annoys everyone. This is answered in your other post.
-
The candara font in italics is turning my words into what looks like another language (it's only happening in the italics version). Does anyone know how to fix it? (I'm running OSX 10.8.3 on a new iMac and the only change I've made recently is to install MS Office for Mac 2011)
This is what the font turns it into (it's supposed to say Chrysler Building & New York Public Library). The font came with Pages which is what I'm working in. It worked before but isn't now.
-
How do I move an imovie project on a macbook pro to an imac
I have an imovie project on a macbook pro. I can't seem to export the movie. I keep getting processing error -108. I want to shift my project from my Macbook pro to my Imac. How do I do this and import into imovie?
Hi
Connection - Either connect one Mac in Target mode to the other via FireWire. Or use an external hard disk !
(Target-Mode - Start one Mac e.g. laptop - BUT keep T-key down during full up-start - Now a FW-symbol is jumping around the screen and it will work as an external hard disk when connected to the other Mac)
A. The External Hard Disk - MUST BE - Mac OS Extended (hfs) formatted to work for Video. UNIX/DOS/FAT32/Mac OS Exchange works for most other things but not for Video whatever program is used (iMovie or FinalCut)
B. Should be a FireWire one as USB/USB2 performs badly to me and especially when filling up
C. Do never Move or Alter any folder named
• iMovie Event's - or -
• iMovie Project's
on DeskTop/Finder - as this will result in iMovie losing connections to them and repair can be anything from hard to impossibly
D. Moving and Copying must be done within iMovie application and Events to Events - and - Project's to Project's.
E. Moving Project's to Event's - Do not work for me - I have to export project as a QuickTime movie then Import this into Events.
BTW:
Event's window can show two faces
Like this
or like this
from one hard disk Event - You can move it to the other hard disk
You can not (at least not me) move Event to Project or other way around only
Event to Event and Project to Project
Yours Bengt W -
Can i plug an usb drive into a iMac and access it with a Macbook pro?
I have an iMac that is less than 3 months old and my wife now has a two week old Macbook Pro.
IMac:
21.5" screen
3.1 quad core i7
16 GB Ram
1 TB Fusion drive
Macbook Pro:
13" screen
3.0 dual core i7
8 GB ram
512 GB Flash storage
Both have Mountain Lion.
Both are running iOS 6.1.2
I would like to attach an external USB hard drive to the iMac and allow the Macbook Pro to be able to have full access to just the external USB hard drive. Either it can't be done or I am just not getting the Sharing settings set correctly. I played around with sharing last night on both machines. When I would plug in a FAT 32 thumb drive into either machine and find it, I would add it to he shared folder but it would only allow me and "Everyone" to have access. I could not change "Everyone" to "No Access" because "Everyone" was greyed out or add my wife. I can access the Macbook Pro as Mark with the iMac but I can only access the iMac from the Macbook Pro as a "Guest".
I am using a Netgear WNR3500L router. I currently have the USB hard drive connected to the router via the Readyshare USB port but it is formatted as NTFS for Windows shared files. This router does not recognize HFS+ formatted hard drives in the USB port. When I move it to the iMac, I will back it up and then reformat it as HFS+. Since the router is about a year old and working fine, I would buy an Airport Extreme or Time Capsule if that is my only choice.
I don't normally turn off the iMac.
I would not want to allow access to any other device.
Since I am very new at Mac's, I would appreciate any help that any of you can offer me.Topher Kessler,
Thanks for commenting to me.
My thumb drive is formatted as Fat 32 so your first paragraph explains what I am seeing.
You are correct that my existing router does not support HFS+. It is visible from my MAC and some file are read only.
The drive that I will be wanting to attach to the iMac would be formatted as HFS+ so it would not be accessible from my router.
So, if I setup sharing (If it is possible) and thern plugged in a USB 3.0 hard drive into my iMac, would it be accessible to my Macbook Pro? If it would not be, it looks like an Airport Extreme or a Time Capsule are my only options?
I see that a Netgear 4500 is Time Machine compatible. Any idea what that means? When I read pages 80 through 82, it appears to me that you format your drive to HFS+ and then eventually plug it into the router usb.
http://www.downloads.netgear.com/files/GDC/WNDR4500/WNDR4500_UM_08Jul12.pdf
Thanks for your comments. -
Installed airport card into my imac G4 flat panel and now it work
I purchased an airport card from Mac-pro as Apple does not sell them anymore. I installed it into my IMAC G4 flat panel as per the instructions. Now, when I turn on the computer the power light comes on, and the screen is black and it really isn't making any noise, as though it is not starting up. It was working just fine before I installed this card!!!! can anyone help??!?!?!?!?
The following Apple article provides the details of
installing an AirPort card in the Flat Panel iMac
G4s. You may want to double-check it to see if you
might have missed something in the the installation
process.
I installed the card properly, as per the instructions you forwarded to me. I did have some trouble getting the card to completly fit into place, one side seemed to go in easier than the other, but it did go in. Is there anyway to get this machine up and running again? -
I made a 'Blurb' book using Lightroom on a computer that was not mine. I backed up the book on an external hard drive and then tried to import the book into my imac. I wasn't able to retrieve my book. The photos I used for the book project are there, but the 45 page book I made is not there.
What do I need to do?You would need to go to the computer containing the book.
Select the saved book in the Collection panel.
Go to Grid View [ G ] and select all the images [Cmd/Ctrl][A]
File>Export as Catalog and store on media you can use to transfer
Bring this catalog onto your computer
File>Import from another catalog and bring the transitory catalog into your master catalog.
It should bring the images, your collections (including your book) and other settings into your own catalog. -
Question: I have a large classical music collection which I have uploaded into my IMAC computer. In the process many of the compositions were placed in needlessly duplicated genre categories ( a sonata turns in three SEPARATE "LP-Classical" categories, all 3 movements separated into different "LP-Classical" categories, one atop the other. How does one eliminate the foolish duplication and recombine the three movements into one composition? I am Desperate.
Normal editing techniques do not work for this problem! Thank you/Question: I have a large classical music collection which I have uploaded into my IMAC computer. In the process many of the compositions were placed in needlessly duplicated genre categories ( a sonata turns in three SEPARATE "LP-Classical" categories, all 3 movements separated into different "LP-Classical" categories, one atop the other. How does one eliminate the foolish duplication and recombine the three movements into one composition? I am Desperate.
Normal editing techniques do not work for this problem! Thank you/ -
Everytime I insert a blank CD into my iMac, it spits it out. How can I fix this so I can burn CDs?
Try using a LensCleaner Disk first off. If that won't even run try a
SMC RESET
http://support.apple.com/kb/HT3964
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
The 5 second timing is important to a successful reset.
Then use the Lens Cleaner again. Make sure your disks are immaculately clean. -
Turn Windows Phone into a video streaming server (not client)?
I want to stream video from a Windows Phone 8/8.1 device but I'm not sure where to start. I have done extensive web searching for C# examples or libraries to do this but everything I have found so far covers using the phone as a
client, not as a source.
I'm guessing I need to turn the phone into an RTSP server? If not, what is the correct technique or starting point for doing this? Main concerns are that the streaming be smooth and with minimal lag, since the Windows Phone (camera) is mounted on a robot
for remote navigation. Too much lag or video performance problems and navigation will be impossible. Any libraries or samples that show how to do this are greatly appreciated.
-- roschlerHi Roschler,
Per my understanding, it is not support in public API. If you need this feature, you can vote it on UserVoice.
https://wpdev.uservoice.com/forums/110705-dev-platform.
If you are OEM developer, you can use your own channel to check if there is such API.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
When I plug my iPhone into my iMac via USB I can choose to "back up to this computer". On another sync to my iMac, can I choose to " back up to the iCloud"? This way I could restore all my info and settings from either source. Is this possible?
On the phone, under Settings > iCloud you can select to turn iCloud ON or OFF.
One iTunes, it senses that toggle and if you had selected iCloud it will say backup to iCloud. Here you can change the toggle to backup to computer and click "Apply" prior to syncing.
I do both for good measure. I backup to computer and then after i disengage the device from the computer, I set the iCloud toggle back to ON and then perform the iCloud backup over wifi.
I found that using iTunes and saying to backup to iCloud isn't always successful in the "last backed up" time and thus I do it separately. -
When I insert an audio CD into my iMac, it automatically starts playing
When I insert an audio CD into my iMac, it automatically starts playing, and I can't figure out why, nor how to stop this behavior. When I click in the upper right corner of my screen where it says "Finder", it shows the Finder as the only application running, and yet SOMETHING must be causing the CD to play. If it is an Extension that is being loaded, is it possible to terminate the Extensions one by one without restarting the computer to see which one is playing the CD?
Is the OS9.1 operating system supposed to automatically play audio CD's when they are inserted into the iMac? Or could it be an Extension that is doing it?And if so, why is no means provided to actually CONTROL the playing of the CD (such as a control panel with PLAY, STOP, SKIP, etc. buttons)?
On a PC, I can press Control/Alt/Delete to bring up the "Task List" that will show me ALL applications and processes currently running, and then terminate apps and processes one by one without having to restart the computer to see which one is playing the CD. Is there an equivalent way to display this information on an iMac that will show me which application or process or extension might be causing the audio CD to play, and allow me to terminate them one by one without restarting the computer until I can see which one is the "problem"?
JerryHi, Jerry -
Welcome to Apple's Discussions.
Finder uses QuickTime in the background to do that, hence no specific app is shown in the Application menu (the far right item in the main menu bar) in addition to Finder.
To unset automatic playing of CDs (and DVDs) -
Open the QuickTime Settings control panel (Apple menu > Control Panels > QuickTime Settings).
In that control panel, select AutoPlay from the pulldown menu in the control panel. Uncheck both the items shown in the new window. Close the control panel.
No restart should be needed in order to make the change effective.
Doing this will also guard against the (now ancient) AutoPlay virus, which could still be lurking somewhere on the net. -
How do I turn off messages on my iMac after upgrading to Yosemite?
How do I turn off messages on my iMac after upgrading to Yosemite?
Hi,
Open the Messages app.
Go to the Preferences item in the app's Menu.
Select the account pane in the Preferences.
Each active account should have a tick in the Enable this Account box.
This can be unticked.
This will stop accounts logging in but will not stop the app Launching in certain circumstances.
First of all check the app is Quit before shutting down the computer.
The fact the app is open even if all windows are hidden can cause the app to restart when you Start up the computer.
Messages is a Multiple window app and using the red button on the top left of a window only closes that window and does not Quit the app.
Also check the System Preferences > Users and Groups > your account > Login Items tab.
This will list items that are set to Start up when the computer does.
I have a couple of External Drive on other computers, some Anti Virus software and the common iTunes Helper plus an old version of TextExpander that will work if I launch the Preference Pane this way.
9:44 pm Saturday; October 18, 2014
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
Any suggestions?
However, I can use scp to copy files out from my iMac (10.6.8) .
I can ssh into the iMac OK.
I created a .profile in my iMac home directory with the single line "export TERM=xterm-color".
This makes a difference to how scp behaves when attempting to copy into the iMac, but it still fails.
Thanks in advance for any help. Peter R
Here is the scp debug output (on the remote machine that I'm copying a file from, to the iMac):
===
Executing: program /usr/bin/ssh host molika.ucsd.edu, user prowat, command scp -v -t Desktop/FromPelican/Outs201201.pdf
Sun_SSH_1.1.3, SSH protocols 1.5/2.0, OpenSSL 0x0090704f
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Rhosts Authentication disabled, originating port will not be trusted.
debug1: ssh_connect: needpriv 0
debug1: Connecting to molika.ucsd.edu [137.110.243.133] port 22.
debug1: Connection established.
debug1: identity file /home/nona/.ssh/identity type -1
debug1: identity file /home/nona/.ssh/id_rsa type -1
debug1: identity file /home/nona/.ssh/id_dsa type -1
debug1: Remote protocol version 1.99, remote software version OpenSSH_5.2
debug1: match: OpenSSH_5.2 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-Sun_SSH_1.1.3
debug1: use_engine is 'yes'
debug1: pkcs11 engine initialized, now setting it as default for RSA, DSA, and symmetric ciphers
debug1: pkcs11 engine initialization complete
debug1: Failed to acquire GSS-API credentials for any mechanisms (No credentials were supplied, or the credentials were unavailable or inaccessible
Unknown code 0
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: kex: server->client aes128-ctr hmac-md5 none
debug1: kex: client->server aes128-ctr hmac-md5 none
debug1: Peer sent proposed langtags, ctos:
debug1: Peer sent proposed langtags, stoc:
debug1: We proposed langtags, ctos: i-default
debug1: We proposed langtags, stoc: i-default
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug1: dh_gen_key: priv key bits set: 124/256
debug1: bits set: 1007/2048
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Host 'molika.ucsd.edu' is known and matches the RSA host key.
debug1: Found key in /home/nona/.ssh/known_hosts:1
debug1: bits set: 1043/2048
debug1: ssh_rsa_verify: signature correct
debug1: newkeys: mode 1
debug1: set_newkeys: setting new keys for 'out' mode
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug1: newkeys: mode 0
debug1: set_newkeys: setting new keys for 'in' mode
debug1: SSH2_MSG_NEWKEYS received
debug1: done: ssh_kex2.
debug1: send SSH2_MSG_SERVICE_REQUEST
debug1: got SSH2_MSG_SERVICE_ACCEPT
debug1: Authentications that can continue: publickey,keyboard-interactive
debug1: Next authentication method: publickey
debug1: Trying private key: /home/nona/.ssh/identity
debug1: Trying private key: /home/nona/.ssh/id_rsa
debug1: Trying private key: /home/nona/.ssh/id_dsa
debug1: Next authentication method: keyboard-interactive
*** Password requested & supplied
debug1: Authentication succeeded (keyboard-interactive)
debug1: fd 5 setting O_NONBLOCK
debug1: fd 6 setting O_NONBLOCK
debug1: fd 7 setting O_NONBLOCK
debug1: channel 0: new [client-session]
debug1: send channel open 0
debug1: Entering interactive session.
debug1: ssh_session2_setup: id 0
debug1: channel request 0: env
debug1: Sending command: scp -v -t Desktop/FromPelican/Outs201201.pdf
debug1: channel request 0: exec
debug1: channel 0: open confirm rwindow 0 rmax 32768
~
debug1: channel 0: read<=0 rfd 5 len 0
debug1: channel 0: read failed
debug1: channel 0: close_read
debug1: channel 0: input open -> drain
debug1: channel 0: ibuf empty
debug1: channel 0: send eof
debug1: channel 0: input drain -> closed
debug1: channel 0: write failed
debug1: channel 0: close_write
debug1: channel 0: output open -> closed
debug1: channel 0: rcvd eof
debug1: client_input_channel_req: channel 0 rtype exit-status reply 0
debug1: channel 0: rcvd close
debug1: channel 0: almost dead
debug1: channel 0: gc: notify user
debug1: channel 0: gc: user detached
debug1: channel 0: send close
debug1: channel 0: is dead
debug1: channel 0: garbage collecting
debug1: channel_free: channel 0: client-session, nchannels 1
debug1: fd 0 clearing O_NONBLOCK
debug1: fd 1 clearing O_NONBLOCK
debug1: fd 2 clearing O_NONBLOCK
debug1: Transferred: stdin 0, stdout 0, stderr 0 bytes in 0.9 seconds
debug1: Bytes per second: stdin 0.0, stdout 0.0, stderr 0.0
debug1: Exit status 0On looking at the secure.log on the iMac with OSX10.6.8, I see these entries at each attempt to scp into the iMac:
Dec 29 11:06:20 molika sshd[7248]: in pam_sm_authenticate(): Failed to determine Kerberos principal name.
Dec 29 11:06:26 molika sshd[7246]: Accepted keyboard-interactive/pam for prowat from 137.110.243.132 port 35571 ssh2
Dec 29 11:06:26 molika com.apple.SecurityServer[26]: Session 0x236a14 created
Dec 29 11:06:26 molika com.apple.SecurityServer[26]: Session 0x236a14 attributes 0x20
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Session 0x236a14 dead
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Killing auth hosts
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Session 0x236a14 destroyed
I don't know what to make of this.
Peter R -
Can't get playlists from one one computer to another. Confident Home Sharing is turned on correctly. Have imac and macbook Air and Lion. Using smart lists.
Using Ethernet, I am attempting to stream the movies on my computer to my girlfriends computer through iTunes home sharing. I want to watch the movies that are on one computer on another.
Maybe you are looking for
-
Lock up during install on WIN2K Advanced Server
I am trying to install Oracle8i Personal Edition ver. 8.1.7 on Windows 2000 advanced server. When I try to install using the Universal Installer it locks up about 20% of the way through, with no error message. Is anybody aware of any known issues. Pl
-
D410a stuck in software update
Turned on D410a, connected only to network. Message appeared on control panel saying new software ready for download. Pressed button to continue. Parts 1 & 2 downloaded and installed. Part 3 downloaded and stopped with 1 second showing on install clo
-
Hi all, When I open Cs 4 InDesign documents in CS5, I am not able to save and also the Undo option is disabled. Any ideas?
-
How can I make my images load when I click them instead of all of my images in the flash movie load at the start?
-
I recently took my imac in for a recall on the hard drive, they replaced my hard drive, i used time machine to restore all my files. Now when I turn time machine on it says back up failed not enough space, it is not overwriting old back ups. Why? Ple