Projectfilter - filter your programming projects on VCS and filenames

I have a lot of projects checked out and sometimes need to do things like "give me all projects with java files to which i committed"
this solves exactly that
https://github.com/Dieterbe/projectfilter

AWESOME. Thank you.

Similar Messages

  • Develop a Integrated Report of Program and Project Risks, Issues and Opportunities from Project Sites

    Does anyone know if it is possible to create an integrated report of all program / project risks, issues and opportunities as identified on project sites? We plan on having our project teams identify and manage these on their project sites but would like
    to  ability to roll this information up into a report for management review.  Need to know if this is possible and how it might be done. Thanks.

    Hi,
    are you asking for a Reporting Services Report? You can find this information in Reporting DB (2010) resp. schema dbo for reporting (2013).
    Here a simple query:
    SELECT PROJ.ProjectName
    , ISSUE.Title AS Issue
    , RISK.Title AS Risk
    FROM dbo.MSP_EpmProject_UserView AS PROJ
    LEFT OUTER JOIN dbo.MSP_WssIssue_OlapView AS ISSUE ON PROJ.ProjectUID = Issue.ProjectUID
    LEFT OUTER JOIN dbo.MSP_WssRisk_OlapView AS RISK ON RISK.ProjectUID = PROJ.ProjectUID
    Or are you looking for something different?
    Regards
    Barbara
    To increase the value of this forum, please mark the replies that helped to solve your issue as answer. If you find answers to questions from other forum participants to be helpful, please mark them as helpful. Your participation will help others to find
    an appropriate solution faster. Thanks for your support!

  • Issue with turning on project 2010 / 2013 - "There is not enough memory to complete the operation. To free up available memory, close programs, projects, or windows you aren't using, and then try again."

    I get the following error after the installation and configuration window of MS Project: "There is not enough memory to complete the operation. To free up available memory, close programs, projects, or windows you aren't using, and then try again."
    It happens both with MS Project 2010 and 2013 on a Windows 7 desktop. 
    I tried installing / uninstalling Office 2010, MS Project, tried installing 32 and then 64 bit versions, clean up, disk error checker, startup changes (msconfig), anti virus, running as Windows 7 and then Windows XP compatible mode. 
    Nothing helps. I see this issue reported as early as 2007 version of MS projects on Microsoft forums, but I do not see any solution anywhere. Any suggestions on how to fix the issue without having to reformat hard drive? Every other application, including
    all other Office programs work seamlessly. 
    I also tried Microsoft support, after an hour and a half of basically doing what I did before, I was told I have to pay 99$ for "premium" support, so someone can look at this bug. 
    I have 16 Gb RAM and more than 200Gb or hard drive free, so actual memory is not the problem. 

    This issue was originally reported with MS Project 2007 and keeps popping up since.
    A quick Google search provides more than 200K pages of results of this issue:
    https://www.google.ca/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=There+is+not+enough+memory+to+complete+the+operation.+To+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren't+using%2C+and+then+try+again.
    And 193K results on Bing:
    http://www.bing.com/search?q=There+is+not+enough+memory+to+complete+the+operation.+To+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren%27t+using%2C+and+then+try+again.&go=Submit&qs=n&form=QBLH&pq=there+is+not+enough+memory+to+complete+the+operation.+to+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren%27t+using%2C+and+then+try+again.&sc=0-0&sp=-1&sk=&cvid=4cb023c1fbd94ec2bba9821b095f21f2
    Computer was defragged already. I run more tests, and specifically when MS Projects tries to run, it tries to take all memory, more than 300Gb, on the computer. (DropBox was running at the same time, and warned that there were no space. As soon as MS Project
    stopped attempting to configure itself, everything came back to normal and the available space became available again.)
    Looking through older forum posts, looks like this application tries to take "unlimited" amount of memory. Some registry fixes are mentioned potentially, but I was not able to apply them. 
    Since everything else works, this is a MS Project bug reported by multiple users on various versions of Windows, including Vista and 7, so please provide a fix and not 'not a know bug' lie. All the premium support will say, is to format the hard drive, unless
    they have a patch or a registry edit solution. If the latter is true, since the issue exists for multiple years, it should have been already been provided to users.
    Also, I am not running a SQL server, or any server, this is an installation on a local machine. 

  • Hi,when ı work on photoshop suddenly my computer restart but i have saved my project before restart.and when ı want to open my psd ,  photoshop alert me with this messagge ;Could not complete your request because the file is not compatible this version of

    hi,when ı work on photoshop suddenly my computer restart but i have saved my project before restart.and when ı want to open my psd ,  photoshop alert me with this messagge ;Could not complete your request because the file is not compatible this version of photoshop ..ı tried all versions but cold not open again.there was a very ımportant work for two days.can you help me please?

    tworules wrote:
    …photoshop need a recovery or auto save system.
    tworules,
    You haven't mentioned the exact version of Photoshop you are running.  As the always helpful and knowledgeable JJMack told you, new versions of Photoshop do have auto save and recovery when enabled in your Photoshop Preferences.
    However, no auto recovery and/or autosave is a match for a defective machine.  As suggested by Mr. Cox, you should do a thorough inspection of all your hardware ASAP.

  • Fall Mazila, and the emergence posts by Crash reporter, the latest version of your program.How do I fix this problem?

    Welcome to the fall issue of your program, occurs at a frequency of 5-10 minutes. Ways to solve this problem, such as updating drivers videkarty, updating software and hardware not help how to solve this problem, I do not know
    ID: ddc4b35f-ebe5-4c39-9540-80a642150106-ID of last fall

    In the address bar, type '''about:crashes'''<enter>.''' Note:''' If any reports do not
    have '''BP''' in front of the numbers, click it and select '''Submit'''.
    Using your mouse, '''mark''' the most '''resent 7 - 10''' crash reports, and
    '''copy''' them. Now go to the reply box below and '''paste''' them in.
    Please state what the problem is. Give any needed details.

  • We have received your program enrollment and are reviewing the information you submitted.

    Hi,
    I submitted all the enrolling information on 20 days back. But i can't able to continue from there. In the process steps, It is showing the "We have received your program enrollment and are reviewing the information you submitted."  this message. I want to know how many i have to wait to complete remaning steps.
    Thanks
    M Ramesh

    We are just other Apple users. You will have to contact Apple Developer support directly.

  • VS 2010 Pro "Other Project Types" / "Setup and Deployment": No items found

    Hello,
    I have VS 2010 Pro Version 10.0.40219.1 SP1 Rel. I have developed a VB.Net application and would like to deploy it. When I try to add a setup project to the solution, I get "No items found" where a list of project types should be in the "Add New Project"
    dialog, "Installed Templates", "Other Project Types", "Setup and Deployment". Shouldn't the Pro version have those templates installed? If so, can I copy them from somewhere? I noticed that "Database" and "Test Projects" also have empty lists. There are lots
    of templates available for the various languages.
    I tried to modify the VS 2010 installation by adding support for SharePoint, but that did not help. Do I have to uninstall, reboot, and re-install? It's so cumbersome considering that I would need to redo the updates as well.
    OS is Win 7 Pro, processor is Intel E8400.
    Thanks!
    r4

    Hi robertrackl,
    Thanks for your post.
    The Setup Project template is located in: Installed Templates >> Other Project Types >> Setup and Deployment >> Visual Studio Installer. Would you please check if the templates exists in this path?
    If not, you can follow the steps below to reset your Visual Studio templates:
    Please open Windows Explorer, and navigate to <Visual Studio Installation Path>\Common7\IDE
    (by default is C:\Program Files \Microsoft Visual Studio 10.0\Common7\IDE);
    Delete the ItemTemplatesCache, ProjectTemplatesCache
    folder;
    Open Visual Studio Command Prompt (2010) under Start menu -> All Programs -> Microsoft Visual Studio 2010 -> Visual Studio Tools (run it with Administrator privilege: right-click the program -> Run as administrator);
    Run the devenv /InstallVSTemplates switch;
    Run the devenv /Setup switch.
    If you have any concerns, please feel free to let me know.
    Best Regards,
    Andrew Wu [MSFT]
    MSDN Community Support | Feedback to us
    Get or Request Code Sample from Microsoft
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • Unable to save/publish Projects on Project Server 2010() using Project Pro 2007 and 2010

    Hi,
    Recently we have upgraded from Project Server 2007 to 2010 SP-2 (BCM enabled) environment and from last few days we are getting issue with Project Plans where PMs are not able to update Projects means save and publish the Project using MS Project  2010/2007.
    Whenever PMs try to open project using MS Project 2010 SP-2, it gets load successfully but when they hit save and publish no jobs are getting fired up nothing is happening. Only way to get out from MS Project 2010 window is to close the Project window and
    and click discard changes. No error and exception windows are popping out in MS Project 2010, no error/problem/issue clue at all from MS Project 2010.
    But when I try to update this Project plan for very first time using MS Project 2007 Sp-2 then I am getting below error
    for any subsequent save and publish using MS Project 2007-SP2 getting below error
    As an alternative I have tried to open this Project Plan using web and there it is getting opened saved and published successfully from PWA absolutely no issue.
    Also I have saved this Project locally as XML and saved and published it on Server successfully. But after someday again this project got corrupt PMs started getting same problem again
    I have also looked at ULS logs but not getting anything useful there.
    So any guesses why this could happen that can give me pointers to find actual root cause, please let me know.
    Thanks much !!!
    Sachin Vashishth MCTS

    Used below steps to fix the Projects on MSP 2010.
    1) Open corrupted project in MS Project connected to PS 2010 Prod env.
    2) Goto > Resource > Add Resource  > Build Team From Enterprise
    3) Check is there any local resource who has not replaced with corresponding enterprise resource. If yes then replace all those local resources with enterprise resource. If not then move to next step.
    4) Open resource sheet view and sort or filter by local resources.
    5) Then add few columns in resource sheet view like "Windows User Account, Email Address , Base Calendar etc".
    6) Now check has any local resource having enterprise attribute assigned to it, if yes then delete or assign local value as appropriate.
    7) Then GoTo > File > Save & Send > Save as project file > Save for sharing (at local location)
    8) Close project plan window and click "Yes" to save changes.
    9) Restart MS Project 2010 and open your project from local location.
    10) Then Goto > File > Save & Send > "Publish to Project Server". This will open "Import Project Wizard" to validate Resources and Task in Project.
    11) Then in Import Project Wizard window at left hand side click "Map Resource" to validate project resources.
    12) This will "Map Project Resource to Enterprise Resource " check all the resources highlighted with "Red" font and map "Standard" calendar to local resources.
           Note: Don't worry about local resource assigned "Standard calendar" but still highlighted "Red".
    13) Then click "OK" and click on "Continue to step 2" at bottom of "Import Project Wizard".
    14) Make sure you get number of errors 0 in step 2, else click on validate resource and take proper corrective action as explained in step 6.
    15) If you leave at least one resource as a local resource (unmapped to an enterprise resource), you will see the local resource in the Import Resource grid on the right side
    of the Confirm Resources page.         
    Examine the value in the "Import" column (if not able to see this column then insert this as new column) for the local resource . 
    The default value is "Yes", then change the value in the "Import" column
    to "No", else system will import the local resource as an enterprise
    resource.
    16) Then "Continue to step 3, 4 and 5".
    17) Then at Step 5 , Save project to Project Server by clicking "Save as" link.
    18) Then publish the project to update the plan at PWA 2010.
    Sachin Vashishth MCTS

  • Another "Sorry, a serious error has occurred that requires Adobe Premiere Elements to shut down. We will attempt to save your current project."

    When I try an open the original project or a copy of it I get this message.
    "Sorry, a serious error has occurred that requires Adobe Premiere Elements to shut down. We will attempt to save your current project."
    I have tried to create a new project and get the same message.
    I have tried uninstalling and reinstalling the program a few times.
    The last time I worked on the project I had no issues.
    Any suggestions?

    Hi
    a. Open Premiere Elements 9.0/9.0.1 - Yes, I get the welcome screen (v9.0).  I can choose open project, and choose my project.  The program will open and show that it is loading the project with the scroll line will show all the way to 100% and will stay there.  Sometimes I get the "Sorry" message and sometimes the loading project window just goes away and nothing is loaded and the program stays on the clock until I close it.
    b. You can find the Adobe Premiere Elements Prefs file and deletion of it makes no difference to your issue. - Made no difference
    c. Have you deleted the whole 9.0 Folder in which the Adobe Premiere Elements Prefs file exists? If not, please do so. - Done, made no difference
    1. Does the problem exist with and without the antivirus and firewall(s) disabled? - Running McAfee Total Access Protection.  Turned off firewall and anti virus. It works.  As a test I left the anti virus off and tried loading project with and with out the firewall turned on.  The project loaded each time.  I then tested the firewall on, with and with out antivirus.  Antivirus off - project loads each time.  Antivirus on - doesn't load and program stays on clock.
    I will continue to experiment with it and see what happens.  The last time I used it I was running a different McAfee product than no.  So it seems to work with the Firewall on and the Antivirus off.

  • Better privecy does not work with windows vista home prem. what other program removes LSO'S AND HOW can I stop trackers?

    Question
    better privacy does not work with windows vista home prem. what other program removes LSO'S AND HOW can I stop trackers? edit
    Details

    As a temporary workaround, I believe this Adobe management page allows you to clear your "Flash cookies": [http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html Adobe - Flash Player : Settings Manager - Website Storage Settings panel] (hosted on macromedia.com -- Macromedia was the original developer of Flash).
    Regarding the script error, if I'm reading the script correctly, it is related to accessing your Flash cookies directory. It seems the publisher's support forum is not currently available for searching, but that might be a good next step.
    In the meantime, could you check whether the script has the correct location for your Flash cookies directory? If you can't access Tool > BetterPrivacy, you could check here:
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the filter box, type or paste '''bpr''' and pause while the list is filtered
    (3) There should be a bolded setting named '''extensions.bprivacy.DataDir''' which looks approximately like the following:
    C:\Users\''yourWindowsUsername''\AppData\Roaming\Macromedia
    Do you have a similar value? If you paste the path used by BetterPrivacy into a Windows Explorer window, does it open? Also, click a couple levels in the folder, can you see:
    Flash Player \ #SharedObjects
    If the value is wrong, right-click the wrong value and choose Reset. BetterPrivacy should update the value the next time you try to access it.
    If the value is blank, you could try inserting a sensible value and see whether that helps.
    Any luck?

  • First project in CS4 and major issues with preview and such.....experienced with all previous PPRO v

    So to sum it up, I have been working in Premiere since version 4.2. I am familiar with program.
    I decided to test CS4 on a simple project, as I usually work on complex HD videos. I captured a friends wedding, shot by someone else (uncle or aunt) in DV mode. I open a CS4 project in DV NTSC 720x480 and import my clip. This should be a simple edit.
    I drag clips to the timeline and do some very basic dissolves in and out to smooth out the rough cuts of the camera operator. So far so good. I am previewing the video out on my second monitor which happens to be an HDTV via the premiere playback to secondary monitor feature.
    I drag a color correction filter onto a clip and "wham" the preview goes away. Then I turn the effect off and it comes back. When I scrub the timeline, all I see is the first frame of that clip all the way through. It's stuck. I have to build a preview to get it to play. In addition, I cannot see a preview of anything when I am makijng color adjustments except in the small monitor window of Premiere. This is basic editing 101....never had to give it a though before and now basic functionality is going haywire. Ofte images are all negative looking too.
    So I started a new project in HD and setup to preview to second monitor. I created a simple title and dragged it to the timeline. It won't preview to the second monitor at all. A simple title. Only in the little premiere monitor. Then I import a jpg....same thing. I have to build a preview to see anything....
    Then....I have these 2 clips on the timeline, a premiere title butted up against a jpg. With no effects, it now will not even show the title anywhere. During the five seconds of the title, I see the jpg (which is coming up next, but in a negative mode...you know reversed out basically) then when it gets to the jpg it shows. If I change the size of anything....it stops working again until I render.....
    I have to say that in the 45 minutes that I have been trying Cs4, it has behaved so strangely it is scaring me. CS3 has it's quirks but they typically present themselves in huge projects, not brand new ones with 2 clips in them, neither of these are even HD video! Just a title and a jpg.
    Any ideas? I have CS3 production Suite running great. Hopefully I missed a simple new setting or something. Yeah...right.
    Intel Q6600
    4GB Ram
    Nvidia 7950
    2 Terabytes of Raid Drives
    Sound Blaster Audigy Card
    My system is not slow by any means.....
    thanks.

    Jim,
    I have accomplished this with an ATI card also, so it can be done. I am not sure what you are trying to imply. It absolutely works. If you are implying that simply because it doesn't blank the screen out when no video is being played that it is not a true output you are wrong. Are there better more color accurate ways to do this? Sure....for thousands of dollars for SDI or HDMI cards then production grade LCDs I'm sure it could work better.
    My video card outputs a 1920x1080 signal to my HDTV....that I calibrate to the best of its ability considering it is not a production monitor. When in Premiere I get full high res 1920x1080 HD video playing on this monitor looking darn close to what it will look like when rendered to Blu-ray, whereas the image on my awsome 30" Dell LCD is not accurate at all. I mean it looks clean and awesome but is not very close to an HDTV colorwise.
    This absolutely works. As good as it is, it is not as accurate as dedicated equipment and color production monitors.
    To be clear, it is an extension of the desktop, and premiere is able to display the entire resolution of the video over the entire thing.

  • PE-11: when adding music to a program the video splits and if it is draged back together the music s

    PE-11: when adding music to a program the video splits and if it is dragged back together the music splits.
    How can I get around this problem?

    Glenda,
    As a test, try dragging, while holding the Ctrl/Cmd modifier key, that "music" to Audio Track 2, and the "bird sounds" SFX file to Audio Track Audio Track 3. There have reports from other users, where the Fixed Audio Tracks, Narration and Soundtrack have caused problems. Those problems seem to be Project-specific. If your Timeline does not have Audio Tracks 1 - 3 already, you can use Add Tracks. The use of the Ctrl/Cmd key, changes how PrE handles existing files on the Timeline, when adding Assets. This usually comes into play, when one is adding Video, or Stills, and should not really affect those, when only adding Audio, but remember, this is only a test.
    Good luck,
    Hunt

  • LV2012 crashes when opening LV2010 project containing OOP and dynamic FPGA references

    I have a project that was written under LV2010 and has no problems that I am aware of. This project contains OOP and dynamic FPGA references. I am trying to upgrade this project to LV2012. When opening this project under LV2012 (or any subVI containing OOP) I get an error message, as shown in the attached screenshot. Has anyone else observed this problem? I haven't found any relevant postings on this forum yet.
    My project is quite large, with many accessors.
    Thank you for any assistance you can offer.
    Attachments:
    LV2012_Crash.PNG ‏22 KB

    Thank you for your response, but the Discussion Forums link that you provided refers to a problem that occurs when exiting a running executable. My problem is different. I am simply opening up a LV2010 project using LV2012. No running of my program is involved.
    Anyway, after several days of work, I narrowed down the cause of the LabVIEW crash. My code contained a Disable structure, and within that Disable structure there was a subVI that had an unwired object terminal (set to dynamic dispatch). Deleting the subVI in the Disable structure eliminated the LabVIEW crashing. Weird behavior.

  • Things to keep in mind while programming to avoid heap and permgen errors?

    I some time get Java heap error and permgen error in my project which is having large code base i.e 2500 java lasses.
    I know about two jvm parameter which we can set to deal with for java heap we can -Xms 1024 -Xmx 1024 and for permgen we can set -Xmx:permgen 256m.
    That also sometime does not solve the problem. I am looking forward if we can do something proactively while programming the application so that we can descrease the probablity of facing such issues. here is my understanding
    Permgen error can occur either at serverstart up or at application run time. I can think two main reason for this:
    1) More the classes will be loaded more spaces will be eaten in permgen area.
    2) Too many reference of static variable in application (as they gets also stored in permgen area). Agreed it wont make much difference. Probably millions of variable can make difference.
    3)Too many string literals used in application.
    So while programming we can take care of points 2 and 3 if we can avoid them. Looking for some other solutions also which we can keep in mind while programming to avoid these situations(For both permgen and java heap out of memory issue). Could not come up if we can follow any proactive approach for not facing java heap out of memory issue?

    JavaFunda wrote:
    As per understanding app server should unload the classes as soon as we stop the server.Well, if you stop the server then it'll definitely unload the classes. Or unloading might not be an accurate term.
    Basically what we do is undeploy and deploy.That's not stopping the server. Unfortunately most of the app servers do require restarts, since they can't get rid of all the crud.
    Is your program doing significant dynamic class loading?Not sure how can i get information about thisRead up a bit on dynamic class loading and see if it looks like something your program is doing a lot (probably not).

  • Programming project - Reversed array

    I'm having a little trouble with this programming project. What I have to do:
    "Write a program named ReverseNumbers that prompts the user to enter 10 numbers, then writes the numbers in reverse order:
    Enter 10 numbers: 34 82 49 102 7 94 23 11 50 31
    In reverse order: 31 50 11 23 94 7 102 49 82 34
    Hint: Store the numbers in an array, starting at position 0. When printing the numbers, visit the elements of the array in reverse order."
    Here's what I have so far:
    import jpb.*;
    public class ReverseNumbers {
    public static void main(String[] args) {
    int[] reverse = new int [10];
    int num;
    int sum = 0;
    int sum2 = 0;
    int num1;
    for(num = 0; num < reverse.length; num++) {
    SimpleIO.prompt ("Enter ten numbers: ");
    String x=SimpleIO.readLine();
    reverse [num] = Integer.parseInt(x);
    for(num = 9; num >= 0; num--) {
    System.out.print( "  " + reverse [num]  );
    }

    warnerja wrote:
    Roridge wrote:
    Herko_ter_Horst wrote:
    Roridge wrote:
    You could delimit your input entry with a comma and then split on the input String to get your integers. e.g. "1,2,3,4,5,6,7,8,9,10"Right, because comma's are so much better than spaces...Yeah, well at least I Suggested something... you are so Elitist!I could have suggested that the OP bake a cake, but that would have helped about as much as you did.
    You are so Noobist!What is the deal with you two, are you like two lovers sitting next to each other determined to prove your Elite status?

Maybe you are looking for