Projecting PowerPoint 2011 - Seaching for source

Just got an Infocus IN112 DLP Projector.
Everything projects Ok until I put powerPoint 2011 in show mode.
It shows, but in top left corner the "Searching for source" displays continuously.
Any ideas? Thanks.

Have tried all resolutions with no luck, but have found that it only happens when in presenter view.
If I use mirror view - no problem.
Same happens with keynote too.
Weird!
At least I can get round it by mirroring displays, but would very much like to use presenter view.
It works OK on external monitor and other projectors, just not with this one. :-(

Similar Messages

  • Hard Drive Setup for Source Files, Media Cache, Project, Render, etc...

    I am working to set up the following drives:
    C: SSD for OS and Programs
    D: RAID 0 (Three SATA II F3's) for Premiere Projects, where I render too, and Encore Projects
    E: RAID 0 (Two SATA III WD Caviar Blacks) for Source Files, media cache, and preview files (if i can get the Marvel controllers/SATA III to RAID that is)
    External HD USB 3.0 for backing up projects
    Should I be doing this different?
    Does anyone think it would be better to use SDD drive(s) instead of HDDs? I

    We're almost there Harm, thanks! I'm about to indicate this as being "Answered"
    More explicitly, are you suggesting it would look like this?
    C: SSD for:
    OS and Programs
    D: RAID 0 (Three SATA II F3's) for:
    Premiere Project
    Where I render project too
    Encore Project
    Source Files (Per Harm's suggestion)
    E:  RAID 0 (Two SATA III WD Caviar Blacks) for:
    Media cache
    Preview files
    Pagefile
    Is two RAIDs more ideal? That is (provided the above configuration is correct); does the pagefile, media cache, and preview files need to be on a RAID?
    Should I partition a piece of my E and use that for the pagefile or pagefile, media cache, and preview files? If yes, which? and how much of a partition should I create?
    When setting the pagefile, should I set all the other drives to "none" (except the E of course)?
    Lastly, regarding my E: drive for media cache, preview files, and pagefile (assuming all this is supposed to be on a different drive). Would I be better off using an SSD for that? Or should I keep my E: drive HDD with RAID 0? I suppose it will depend on what's more important, read or write speed. If read speed is more important than I can get an SSD for under $200 that will be really fast reads. If it's about writing then my WD's in a RAID will be better. So, which is more important for these things, writing speed or reading speed? If the SSD would be a solution for the extra files then I’ll have this set up:
    C: SSD for:
    OS and Programs
    D: RAID 0 (Three SATA II F3's) for:
    Premiere Project
    Where I render project too
    Encore Project
    Source Files (Per Harm's suggestion)
    E:  SSD for:
    Media cache
    Preview files
    Pagefile
    F:  One SATA III WD Caviar Black for:
    Extra Backups and stuff
    Thanks Harm, I'm about to have an unprecedented editing experience I think! Finally, after more than 7 years!

  • Inserting a .wmv file into a powerpoint 2011 for mac

    When I try to insert a wmv file in powerpoint 2011 for mac I get the following error.  "Powerpoint couldn't insert a movie from the selected file.  Either the file is non standard or Quicktime is not installed properly."    I do have Flip4Mac installed.  I also tried to rename the .wmv file as a .mov file.  Thanks in advance for your help.

    I do have Flip4Mac installed.  I also tried to rename the .wmv file as a .mov file.
    Do you have the $29 (or greater) Flip4Mac decoder component installed? Changing the file extension at the Finder level does not change the data type contained within the file nor the file container type. If you want the WMV data in an MOV file container, you must use the QT 7 Pro (or MPEG Streamclip) "Save As..." option (together with the decoder component) to partially expand the WMV data (file will be noticeably larger) and place the expanded data in a "real" MOV file container.

  • Advance select for source file in Sender File Adapter

    Hi
    I am trying to utilise the parameter 'Advance Selection for source file' on a sender file adapter to pick the file from multiple folders
    My problem is that this parameter that is listed on the SAP help is not getting in File accessing Parameters.
    I am running PI 7.02 (NW702_07_Rel)
    Service pack 07
    Has anyone come across this before?
    any suggestions on how to do this?

    Hi,
    In PI7.0 the property exists. I have used it previously. I think SP was 13.
    Regards,
    Nutan
    Edited by: nutan champia on Nov 24, 2011 10:42 AM

  • Macbook Pro video issue with multiple Monitors and Powerpoint 2011

    Hello all,
    I have a major issue that is perplexing me. Whenever I hook up a second monitor or projector to my Macbook Pro 15" Early 2010 and launch a Powerpoint slideshow I lose video on both systems immediately and can only recover with a reboot. This is fully reproducable. It doesn't matter if I'm using the mini Display Port to DVI or VGA adapter, same results. Same results with monitors, TVs, or external projectors. I only experience this issue in MS Powerpoint 2011, no other applications. I have 8GB of Ram and a 2.66GHZ i7. It doesn't matter what my resolution is set to, same issue. I will post two error reports below for additional details.
    Thank you for the help,
    Eric
    Interval Since Last Panic Report: 1489459 sec
    Panics Since Last Report: 5
    Anonymous UUID: AC46B310-CEBD-4130-AAD5-8D163B949E0D
    Thu Mar 3 18:08:35 2011
    panic(cpu 0 caller 0x9d3bfa): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0xa5ea3000 0x0a5480a2, D0, P2/4
    Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
    0x83701768 : 0x21b50c (0x5d4438 0x8370179c 0x223974 0x0)
    0x837017b8 : 0x9d3bfa (0xbe92bc 0xc59940 0xbf8424 0x0)
    0x83701858 : 0xaee640 (0xe9c5c04 0xd551004 0x100 0xae881b)
    0x837018a8 : 0xae5639 (0xd551004 0x100 0x837018d8 0x9c36d7)
    0x837018d8 : 0x17169ce (0xd551004 0x100 0x438004ee 0x3)
    0x83701a18 : 0xb0d2bd (0xd551004 0xd681004 0x0 0x0)
    0x83701a58 : 0x9dce63 (0xd551004 0xd681004 0x0 0x0)
    0x83701af8 : 0x9d946f (0x0 0x9 0x0 0x0)
    0x83701ca8 : 0x9da2b7 (0x0 0x600d600d 0x7057 0x83701ce8)
    0x83701d98 : 0xc94d1c (0xc1d00044 0xbeef0003 0xcaf0133e 0xcaf01340)
    0x83701eb8 : 0xc94fba (0xee95804 0x18547e04 0x6d1c6460 0x8)
    0x83701f18 : 0xc952a5 (0xee95804 0x18547e04 0x6d1c6460 0x83702180)
    0x83701fc8 : 0xca94a9 (0xee95804 0x1844a8e8 0x8370233c 0x83702180)
    0x83702238 : 0xc8ac0b (0x6d29e000 0x1844a8e8 0x8370233c 0x83702324)
    0x83702398 : 0xc8ae49 (0x6d1de000 0x1844a800 0x1 0x0)
    0x837023c8 : 0xc8d90a (0x6d1de000 0x1844a800 0x1 0x9e9de118)
    0x83702408 : 0xcafb4e (0x6d1de000 0x1844a800 0x6d3f2274 0x140)
    0x83702498 : 0xca13c1 (0x1855ec80 0x1844a800 0x0 0x1)
    0x837024f8 : 0xca1628 (0x6d3f2000 0x6d3f277c 0x1844a800 0x0)
    0x83702548 : 0xca1afc (0x6d3f2000 0x6d3f277c 0x8370286c 0x8370280c)
    0x83702888 : 0xc9e945 (0x6d3f2000 0x6d3f277c 0x1 0x220673)
    0x837028a8 : 0xc665a1 (0x6d3f2000 0x6d3f277c 0x18724240 0x500547)
    0x837028d8 : 0xca0408 (0x6d3f2000 0x83702a1c 0x83702908 0x4ffa01)
    0x83702918 : 0xc6a8de (0x6d3f2000 0x83702a1c 0x83702a1c 0x83702980)
    0x83702a58 : 0xca3cfe (0x6d3f2000 0x0 0x83702b6c 0x83702b68)
    0x83702b08 : 0xc66c93 (0x6d3f2000 0x0 0x83702b6c 0x83702b68)
    0x83702b88 : 0x565a88 (0x6d3f2000 0x0 0x83702ddc 0x83702c14)
    0x83702bd8 : 0x566327 (0xcf4e20 0x6d3f2000 0x1cac2d88 0x1)
    0x83702c28 : 0x566bdb (0x6d3f2000 0x10 0x83702c70 0x0)
    0x83702d48 : 0x285bce (0x6d3f2000 0x10 0x1cac2d88 0x1)
    0x83703df8 : 0x21d8ba (0x1cac2d60 0x114625a0 0xfc330 0x8a03)
    0x83703e38 : 0x210a3a (0x1cac2d00 0x0 0x1cab2ce0 0x10599fc0)
    Backtrace continues...
    Kernel Extensions in backtrace (with dependencies):
    com.apple.GeForce(6.2.6)@0xc5b000->0xd10fff
    dependency: com.apple.NVDAResman(6.2.6)@0x96d000
    dependency: com.apple.iokit.IONDRVSupport(2.2)@0x960000
    dependency: com.apple.iokit.IOPCIFamily(2.6)@0x92d000
    dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0x93e000
    com.apple.nvidia.nv50hal(6.2.6)@0x15e0000->0x19f4fff
    dependency: com.apple.NVDAResman(6.2.6)@0x96d000
    com.apple.NVDAResman(6.2.6)@0x96d000->0xc5afff
    dependency: com.apple.iokit.IOPCIFamily(2.6)@0x92d000
    dependency: com.apple.iokit.IONDRVSupport(2.2)@0x960000
    dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0x93e000
    BSD process name corresponding to current thread: Microsoft PowerP
    Mac OS version:
    10J567
    Kernel version:
    Darwin Kernel Version 10.6.0: Wed Nov 10 18:13:17 PST 2010; root:xnu-1504.9.26~3/RELEASE_I386
    System model name: MacBookPro6,2 (Mac-F22586C8)
    System uptime in nanoseconds: 6097571436804
    unloaded kexts:
    com.apple.driver.AppleUSBUHCI 4.1.5 (addr 0x147f000, size 0x65536) - last unloaded 133585664378
    loaded kexts:
    com.aventail.xgfilt.kext 1.0 - last loaded 362791442640
    com.aventail.tun.kext 1.0
    com.google.filesystems.fusefs 2.0.3
    com.McAfee.kext.AppProtection 1.0.0d1
    com.vmware.kext.vmnet 3.1.2
    com.vmware.kext.vmioplug 3.1.2
    com.vmware.kext.vmci 3.1.2
    com.vmware.kext.vmx86 3.1.2
    com.mcafee.kext.Virex 1.0.0d1
    MonitorControl.drv 1.0d3
    com.apple.filesystems.udf 2.1
    com.apple.driver.AppleHWSensor 1.9.3d0
    com.apple.filesystems.autofs 2.1.0
    com.apple.driver.AppleBluetoothMultitouch 54
    com.apple.driver.AppleMikeyHIDDriver 1.2.0
    com.apple.driver.AppleHDA 1.9.9f12
    com.apple.driver.AGPM 100.12.19
    com.apple.driver.AppleMikeyDriver 1.9.9f12
    com.apple.driver.AudioAUUC 1.13
    com.apple.driver.AppleUpstreamUserClient 3.4.5
    com.apple.driver.AppleMCCSControl 1.0.17
    com.apple.driver.SMCMotionSensor 3.0.0d4
    com.apple.kext.AppleSMCLMU 1.5.0d3
    com.apple.DontSteal_Mac_OSX 7.0.0
    com.apple.driver.AudioIPCDriver 1.1.6
    com.apple.driver.ACPISMCPlatformPlugin 4.5.0d5
    com.apple.driver.AppleLPC 1.4.12
    com.apple.driver.AppleGraphicsControl 2.8.68
    com.apple.GeForce 6.2.6
    com.apple.driver.AppleIntelHDGraphics 6.2.6
    com.apple.driver.AppleIntelHDGraphicsFB 6.2.6
    com.apple.driver.MaxTranserSizeOverrideDriver 2.5.8
    com.apple.driver.AppleUSBTCButtons 200.3.2
    com.apple.driver.AppleUSBCardReader 2.5.8
    com.apple.driver.AppleUSBTCKeyboard 200.3.2
    com.apple.driver.AppleIRController 303.8
    com.apple.iokit.SCSITaskUserClient 2.6.5
    com.apple.BootCache 31
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.iokit.IOAHCIBlockStorage 1.6.3
    com.apple.driver.AppleUSBHub 4.1.7
    com.apple.driver.AppleFWOHCI 4.7.1
    com.apple.driver.AirPortBrcm43224 426.36.1
    com.apple.iokit.AppleBCM5701Ethernet 2.3.9b6
    com.apple.driver.AppleEFINVRAM 1.4.0
    com.apple.driver.AppleSmartBatteryManager 160.0.0
    com.apple.driver.AppleUSBEHCI 4.1.7
    com.apple.driver.AppleAHCIPort 2.1.5
    com.apple.driver.AppleACPIButtons 1.3.5
    com.apple.driver.AppleRTC 1.3.1
    com.apple.driver.AppleHPET 1.5
    com.apple.driver.AppleSMBIOS 1.6
    com.apple.driver.AppleACPIEC 1.3.5
    com.apple.driver.AppleAPIC 1.4
    com.apple.driver.AppleIntelCPUPowerManagementClient 105.13.0
    com.apple.security.sandbox 1
    com.apple.security.quarantine 0
    com.apple.nke.applicationfirewall 2.1.11
    com.apple.driver.AppleIntelCPUPowerManagement 105.13.0
    com.apple.driver.AppleHIDKeyboard 141
    com.apple.driver.IOBluetoothHIDDriver 2.3.8f7
    com.apple.driver.AppleMultitouchDriver 207.10
    com.apple.driver.AppleProfileReadCounterAction 17
    com.apple.driver.DspFuncLib 1.9.9f12
    com.apple.driver.AppleProfileTimestampAction 10
    com.apple.driver.AppleProfileThreadInfoAction 14
    com.apple.driver.AppleProfileRegisterStateAction 10
    com.apple.driver.AppleProfileKEventAction 10
    com.apple.driver.AppleProfileCallstackAction 20
    com.apple.driver.AppleSMBusController 1.0.8d0
    com.apple.iokit.IOFireWireIP 2.0.3
    com.apple.iokit.IOSurface 74.2
    com.apple.iokit.IOBluetoothSerialManager 2.3.8f7
    com.apple.iokit.IOSerialFamily 10.0.3
    com.apple.iokit.IOAudioFamily 1.8.0fc1
    com.apple.kext.OSvKernDSPLib 1.3
    com.apple.driver.AppleHDAController 1.9.9f12
    com.apple.iokit.IOHDAFamily 1.9.9f12
    com.apple.iokit.AppleProfileFamily 41
    com.apple.driver.AppleSMC 3.1.0d3
    com.apple.driver.IOPlatformPluginFamily 4.5.0d5
    com.apple.driver.AppleSMBusPCI 1.0.8d0
    com.apple.nvidia.nv50hal 6.2.6
    com.apple.NVDAResman 6.2.6
    com.apple.iokit.IONDRVSupport 2.2
    com.apple.iokit.IOGraphicsFamily 2.2
    com.apple.driver.BroadcomUSBBluetoothHCIController 2.3.8f7
    com.apple.driver.AppleUSBBluetoothHCIController 2.3.8f7
    com.apple.iokit.IOBluetoothFamily 2.3.8f7
    com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.5
    com.apple.iokit.IOUSBMassStorageClass 2.6.5
    com.apple.driver.AppleUSBMultitouch 206.6
    com.apple.iokit.IOUSBHIDDriver 4.1.5
    com.apple.driver.AppleUSBMergeNub 4.1.5
    com.apple.driver.AppleUSBComposite 3.9.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5
    com.apple.iokit.IOBDStorageFamily 1.6
    com.apple.iokit.IODVDStorageFamily 1.6
    com.apple.iokit.IOCDStorageFamily 1.6
    com.apple.driver.XsanFilter 402.1
    com.apple.iokit.IOAHCISerialATAPI 1.2.5
    com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5
    com.apple.iokit.IOUSBUserClient 4.1.5
    com.apple.iokit.IOFireWireFamily 4.2.6
    com.apple.iokit.IO80211Family 312
    com.apple.iokit.IONetworkingFamily 1.9
    com.apple.iokit.IOUSBFamily 4.1.7
    com.apple.iokit.IOAHCIFamily 2.0.4
    com.apple.driver.AppleEFIRuntime 1.4.0
    com.apple.iokit.IOHIDFamily 1.6.5
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.security.TMSafetyNet 6
    com.apple.driver.DiskImages 289
    com.apple.iokit.IOStorageFamily 1.6.2
    com.apple.driver.AppleACPIPlatform 1.3.5
    com.apple.iokit.IOPCIFamily 2.6
    com.apple.iokit.IOACPIFamily 1.3.0
    Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.58f16
    Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
    Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
    Memory Module: global_name
    AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.36.1)
    Bluetooth: Version 2.3.8f7, 2 service, 19 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: ST9500420ASG, 465.76 GB
    Serial ATA Device: MATSHITADVD-R UJ-898, 5.6 MB
    USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000
    USB Device: My Book, 0x1058 (Western Digital Technologies, Inc.), 0x1102, 0xfd130000
    USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000
    USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0xfd110000
    USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000
    USB Device: Hub, 0x050d (Belkin Corporation), 0x0237, 0xfa140000
    USB Device: ImageMate 12 in 1 Reader/Writer, 0x0781 (SanDisk Corporation), 0x8989, 0xfa144000
    USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfa130000
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0xfa120000
    USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000
    USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0xfa113000
    #2 Panic
    Interval Since Last Panic Report: 1490834 sec
    Panics Since Last Report: 7
    Anonymous UUID: AC46B310-CEBD-4130-AAD5-8D163B949E0D
    Thu Mar 3 18:30:57 2011
    panic(cpu 2 caller 0x9d3bfa): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0xa5e82000 0x0a5480a2, D0, P2/4
    Backtrace (CPU 2), Frame : Return Address (4 potential args on stack)
    0x82f79bd8 : 0x21b50c (0x5d4438 0x82f79c0c 0x223974 0x0)
    0x82f79c28 : 0x9d3bfa (0xbe92bc 0xc59940 0xbf8424 0x0)
    0x82f79cc8 : 0xaee640 (0xe4e0804 0xe624004 0x100 0x2)
    0x82f79d18 : 0xae5639 (0xe624004 0x100 0x82f79d48 0x9c36d7)
    0x82f79d48 : 0x171a9ce (0xe624004 0x100 0x438004ee 0x29eac3)
    0x82f79e88 : 0xb0d2bd (0xe624004 0xe4db004 0x0 0x0)
    0x82f79ec8 : 0x9dce63 (0xe624004 0xe4db004 0x0 0x0)
    0x82f79f68 : 0x9d946f (0x0 0x9 0x0 0x0)
    0x82f7a118 : 0x9db5fb (0x0 0x600d600d 0x7027 0x82f7a148)
    0x82f7a1e8 : 0xc84975 (0xc1d00041 0xbeef0003 0x18512500 0x71)
    0x82f7a288 : 0xc84e9f (0x6d204000 0x18512500 0x184fc004 0x0)
    0x82f7a2c8 : 0xc5ce0b (0x6d204000 0x18512500 0x184fc004 0x0)
    0x82f7a2f8 : 0xc84572 (0x6d204000 0x18512500 0x184fc004 0x0)
    0x82f7a318 : 0xc5c418 (0x6d204000 0x18512500 0x184fc004 0x0)
    0x82f7a338 : 0xc84e4a (0x6d204000 0x184fc000 0x2 0x2)
    0x82f7a378 : 0xc5f7b9 (0x6d204000 0x184fc000 0x0 0x184fc000)
    0x82f7a3b8 : 0xc5d269 (0x6d204000 0x6d3cf000 0x6d3d8000 0x1808d400)
    0x82f7a408 : 0xcafbed (0x6d204000 0x6d3cf000 0x6d3d8000 0x1808d400)
    0x82f7a498 : 0xca13c1 (0x1808d400 0x184fc000 0x0 0x1)
    0x82f7a4f8 : 0xca1628 (0x6d3cf000 0x6d3cf77c 0x184fc000 0x0)
    0x82f7a548 : 0xca1afc (0x6d3cf000 0x6d3cf77c 0x82f7a86c 0x82f7a80c)
    0x82f7a888 : 0xc9e945 (0x6d3cf000 0x6d3cf77c 0x1 0x220673)
    0x82f7a8a8 : 0xc665a1 (0x6d3cf000 0x6d3cf77c 0x18513100 0x500547)
    0x82f7a8d8 : 0xca0408 (0x6d3cf000 0x82f7aa1c 0x82f7a908 0x6d3cf000)
    0x82f7a918 : 0xc6a8de (0x6d3cf000 0x82f7aa1c 0x82f7aa1c 0x82f7a980)
    0x82f7aa58 : 0xca3cfe (0x6d3cf000 0x0 0x82f7ab6c 0x82f7ab68)
    0x82f7ab08 : 0xc66c93 (0x6d3cf000 0x0 0x82f7ab6c 0x82f7ab68)
    0x82f7ab88 : 0x565a88 (0x6d3cf000 0x0 0x82f7addc 0x82f7ac14)
    0x82f7abd8 : 0x566327 (0xcf4e20 0x6d3cf000 0x17ce2188 0x1)
    0x82f7ac28 : 0x566bdb (0x6d3cf000 0x10 0x82f7ac70 0x0)
    0x82f7ad48 : 0x285bce (0x6d3cf000 0x10 0x17ce2188 0x1)
    0x82f7bdf8 : 0x21d8ba (0x17ce2160 0x1720f5a0 0x1fd590 0xa017)
    Backtrace continues...
    Kernel Extensions in backtrace (with dependencies):
    com.apple.nvidia.nv50hal(6.2.6)@0x15e4000->0x19f8fff
    dependency: com.apple.NVDAResman(6.2.6)@0x96d000
    com.apple.GeForce(6.2.6)@0xc5b000->0xd10fff
    dependency: com.apple.NVDAResman(6.2.6)@0x96d000
    dependency: com.apple.iokit.IONDRVSupport(2.2)@0x960000
    dependency: com.apple.iokit.IOPCIFamily(2.6)@0x92d000
    dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0x93e000
    com.apple.NVDAResman(6.2.6)@0x96d000->0xc5afff
    dependency: com.apple.iokit.IOPCIFamily(2.6)@0x92d000
    dependency: com.apple.iokit.IONDRVSupport(2.2)@0x960000
    dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0x93e000
    BSD process name corresponding to current thread: Microsoft PowerP
    Mac OS version:
    10J567
    Kernel version:
    Darwin Kernel Version 10.6.0: Wed Nov 10 18:13:17 PST 2010; root:xnu-1504.9.26~3/RELEASE_I386
    System model name: MacBookPro6,2 (Mac-F22586C8)
    System uptime in nanoseconds: 404911465926
    unloaded kexts:
    com.apple.driver.AppleUSBUHCI 4.1.5 (addr 0x1483000, size 0x65536) - last unloaded 107949333800
    loaded kexts:
    com.google.filesystems.fusefs 2.0.3 - last loaded 376650877354
    com.McAfee.kext.AppProtection 1.0.0d1
    com.vmware.kext.vmnet 3.1.2
    com.vmware.kext.vmioplug 3.1.2
    com.vmware.kext.vmci 3.1.2
    com.vmware.kext.vmx86 3.1.2
    com.mcafee.kext.Virex 1.0.0d1
    MonitorControl.drv 1.0d3
    com.apple.filesystems.udf 2.1
    com.apple.driver.AppleHWSensor 1.9.3d0
    com.apple.filesystems.autofs 2.1.0
    com.apple.driver.AppleBluetoothMultitouch 54
    com.apple.driver.AppleMikeyHIDDriver 1.2.0
    com.apple.driver.AppleHDA 1.9.9f12
    com.apple.driver.AGPM 100.12.19
    com.apple.driver.AppleUpstreamUserClient 3.4.5
    com.apple.driver.AppleMCCSControl 1.0.17
    com.apple.driver.AppleMikeyDriver 1.9.9f12
    com.apple.driver.AudioAUUC 1.13
    com.apple.driver.AppleIntelHDGraphics 6.2.6
    com.apple.driver.AppleIntelHDGraphicsFB 6.2.6
    com.apple.driver.SMCMotionSensor 3.0.0d4
    com.apple.kext.AppleSMCLMU 1.5.0d3
    com.apple.DontSteal_Mac_OSX 7.0.0
    com.apple.driver.AudioIPCDriver 1.1.6
    com.apple.GeForce 6.2.6
    com.apple.driver.ACPISMCPlatformPlugin 4.5.0d5
    com.apple.driver.AppleGraphicsControl 2.8.68
    com.apple.driver.AppleLPC 1.4.12
    com.apple.driver.MaxTranserSizeOverrideDriver 2.5.8
    com.apple.driver.AppleUSBTCButtons 200.3.2
    com.apple.driver.AppleUSBCardReader 2.5.8
    com.apple.driver.AppleIRController 303.8
    com.apple.driver.AppleUSBTCKeyboard 200.3.2
    com.apple.BootCache 31
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.iokit.SCSITaskUserClient 2.6.5
    com.apple.iokit.IOAHCIBlockStorage 1.6.3
    com.apple.driver.AppleUSBHub 4.1.7
    com.apple.driver.AppleFWOHCI 4.7.1
    com.apple.driver.AirPortBrcm43224 426.36.1
    com.apple.iokit.AppleBCM5701Ethernet 2.3.9b6
    com.apple.driver.AppleEFINVRAM 1.4.0
    com.apple.driver.AppleSmartBatteryManager 160.0.0
    com.apple.driver.AppleUSBEHCI 4.1.7
    com.apple.driver.AppleAHCIPort 2.1.5
    com.apple.driver.AppleACPIButtons 1.3.5
    com.apple.driver.AppleRTC 1.3.1
    com.apple.driver.AppleHPET 1.5
    com.apple.driver.AppleSMBIOS 1.6
    com.apple.driver.AppleACPIEC 1.3.5
    com.apple.driver.AppleAPIC 1.4
    com.apple.driver.AppleIntelCPUPowerManagementClient 105.13.0
    com.apple.security.sandbox 1
    com.apple.security.quarantine 0
    com.apple.nke.applicationfirewall 2.1.11
    com.apple.driver.AppleIntelCPUPowerManagement 105.13.0
    com.apple.driver.AppleHIDKeyboard 141
    com.apple.driver.IOBluetoothHIDDriver 2.3.8f7
    com.apple.driver.AppleMultitouchDriver 207.10
    com.apple.driver.DspFuncLib 1.9.9f12
    com.apple.driver.AppleProfileReadCounterAction 17
    com.apple.driver.AppleProfileTimestampAction 10
    com.apple.driver.AppleProfileThreadInfoAction 14
    com.apple.driver.AppleProfileRegisterStateAction 10
    com.apple.driver.AppleProfileKEventAction 10
    com.apple.driver.AppleProfileCallstackAction 20
    com.apple.driver.AppleSMBusController 1.0.8d0
    com.apple.nvidia.nv50hal 6.2.6
    com.apple.iokit.IOFireWireIP 2.0.3
    com.apple.iokit.IOSurface 74.2
    com.apple.iokit.IOBluetoothSerialManager 2.3.8f7
    com.apple.iokit.IOSerialFamily 10.0.3
    com.apple.iokit.IOAudioFamily 1.8.0fc1
    com.apple.kext.OSvKernDSPLib 1.3
    com.apple.driver.AppleHDAController 1.9.9f12
    com.apple.iokit.IOHDAFamily 1.9.9f12
    com.apple.NVDAResman 6.2.6
    com.apple.driver.AppleSMC 3.1.0d3
    com.apple.driver.IOPlatformPluginFamily 4.5.0d5
    com.apple.driver.AppleSMBusPCI 1.0.8d0
    com.apple.iokit.IONDRVSupport 2.2
    com.apple.iokit.IOGraphicsFamily 2.2
    com.apple.iokit.AppleProfileFamily 41
    com.apple.driver.BroadcomUSBBluetoothHCIController 2.3.8f7
    com.apple.driver.AppleUSBBluetoothHCIController 2.3.8f7
    com.apple.iokit.IOBluetoothFamily 2.3.8f7
    com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.5
    com.apple.iokit.IOUSBMassStorageClass 2.6.5
    com.apple.driver.AppleUSBMultitouch 206.6
    com.apple.iokit.IOUSBHIDDriver 4.1.5
    com.apple.driver.AppleUSBMergeNub 4.1.5
    com.apple.driver.AppleUSBComposite 3.9.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5
    com.apple.iokit.IOBDStorageFamily 1.6
    com.apple.iokit.IODVDStorageFamily 1.6
    com.apple.iokit.IOCDStorageFamily 1.6
    com.apple.driver.XsanFilter 402.1
    com.apple.iokit.IOAHCISerialATAPI 1.2.5
    com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5
    com.apple.iokit.IOUSBUserClient 4.1.5
    com.apple.iokit.IOFireWireFamily 4.2.6
    com.apple.iokit.IO80211Family 312
    com.apple.iokit.IONetworkingFamily 1.9
    com.apple.iokit.IOUSBFamily 4.1.7
    com.apple.iokit.IOAHCIFamily 2.0.4
    com.apple.driver.AppleEFIRuntime 1.4.0
    com.apple.iokit.IOHIDFamily 1.6.5
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.security.TMSafetyNet 6
    com.apple.driver.DiskImages 289
    com.apple.iokit.IOStorageFamily 1.6.2
    com.apple.driver.AppleACPIPlatform 1.3.5
    com.apple.iokit.IOPCIFamily 2.6
    com.apple.iokit.IOACPIFamily 1.3.0
    Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.58f16
    Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
    Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
    Memory Module: global_name
    AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.36.1)
    Bluetooth: Version 2.3.8f7, 2 service, 19 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: ST9500420ASG, 465.76 GB
    Serial ATA Device: MATSHITADVD-R UJ-898, 5.6 MB
    USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000
    USB Device: Hub, 0x050d (Belkin Corporation), 0x0237, 0xfa140000
    USB Device: ImageMate 12 in 1 Reader/Writer, 0x0781 (SanDisk Corporation), 0x8989, 0xfa144000
    USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfa130000
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0xfa120000
    USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000
    USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0xfa113000
    USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000
    USB Device: My Book, 0x1058 (Western Digital Technologies, Inc.), 0x1102, 0xfd130000
    USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000
    USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0xfd110000

    I "fixed" it, I did a fresh install and restore and that power point issue is gone.  It works now without crashing but I am using Snow Leopard 10.6.4 now instead of 10.6.7.  I'm going to update and see what happens.

  • Creating a project in Flex Builder for the Hybrid Store sample Application

    Hi all,
    How to create a project in Flexbuilder for the hybrid store
    sample application.
    I downloaded the source code of hybridstore application,
    Now i have to create a project for it to run that application
    in my system,
    will you please tell me how to create a project for this
    sample.
    I have also read the readme.html file. but i could not follow
    exactly what they are saying.
    what i did is, I unzipped the source code into a folder
    hybridstore.
    I opened the flexbuilder : File -- new -- flexproject ( i
    have selected) then i have given name to my file (hybridstore) ,
    and set the path to the hybridstore folder where the source code
    exists.
    but it as created hybridstore.mxml file also.
    it is not working.
    will you please till me how to create project for this
    application.
    I have created project for other samples like restaurent
    finder, dashboard. they are working fine.
    I got problem with this sample only.
    Thanks in advance
    Regards
    Avanthika

    Hi,
    thanks for your reply,
    I have tried to open using file import, but still it is not
    working.
    in the readme file for this application , contains how to
    Creating a project in Flex Builder for the Hybrid Store
    application:
    Name your default application catalog.mxml.
    Prevent Flex Builder from generating an HTML wrapper: select
    Project > Properties. Select the Flex Compiler page, deselect
    the Generate HTML wrapper file option .
    Create a Run configuration for your project but deselect the
    Use defaults option and instead assign the Run setting to the
    hybridstore.html in your project's bin directory.
    To enable debugging of the Hybrid Store application you must
    create a copy of hybridstore.html. Open it in an editor (you can
    right-click on the file and select Open With > Text Editor).
    Find the line that says "src", "catalog" and change it to "src",
    "catalog-debug". Assign the Debug setting to this new HTML file.
    As i am new to flex , i could not know how to do this.
    please help me how to do this.
    regards
    Avanthika

  • Artifacting in Motion.  Sample project, and a request for help inside.

    Would anyone be willing to download this Motion project and see if any artifacting occurs, either on playback or export? I'm on an original 2.66 quad macpro with a x1900 GPU. i've had the entire system checked out by apple, and clean installed everything and this issue still persists. i'm just curious everything the same if the issue shows up on anyone else's system with a similar configuration.
    after opening motion it takes about 2x times looped through or just randomly scrubbed before the artifacts start to appear.
    here's the link, it's got the motn source .mov zipped up and a sample of the artifacting issue as well as a screen cap from openGL monitor that shows some interested parameters jumping around when artifacting occurs.
    http://file.meyersproduction.com/motion/3.16.08/
    I copy and pasted what I sent to motion's feedback page below.
    thanks
    austin
    "issue: artifacting in motion when building/exporting multi layer projects with video with fx's and masks applied (about 13 layers with 1 mask and primatte rt turned on causes artifacting). Link to samples of .motn and .mov below.
    background: this is occurring on a clean install of os x 10.5 as well as a clean install of 10.4. this computer has spent a week at the apple store getting run through hardware diagnostics and came back with a clean bill of health. after reinstalling and building fresh projects the same artifacting immediately reoccurred.
    other notes: I have run the OpenGL monitor while playing back and exporting in motion and artifacts always coincide with a huge spike in the "Texture Page Off Data (Non-AGP)" parameter, there are also lessor spikes in "CPU wait for GPU" but those are not always indicative of an artifact.
    I also have a nvidia 7300 gpu installed and it handles any and all motn files flawlessly (albeit soooo much slower)
    I have had similar issues since purchasing this system over a year ago.
    I would sincerely appreciate any kind of communication other than "reinstall your system and FCS 2"
    below is a link to a motn project and video asset, as well as a openGL screencap and exported movie with artifacts
    http://file.meyersproduction.com/motion/3.16.08/"

    Personally, I think the problem is related to Leopard. I too have been getting artefacts in Motion 3 projects with masking since installing Leopard. Like Austin's experience, the artefacts do not appear at first after launching Motion but emerge fairly fast.
    Deleting the mask(s) gets rid of the problem but I kind of wanted to be able to use masks in my Motion projects! I had been doing so without problems in Motion 3 but with OS X Tiger. In case you were wondering, I have also reinstalled Motion and Final Cut since installing Leopard following advice on other threads.
    I don't think the issue is hardware-related, though I appreciate that my projects are very demanding for the system I have. Other more demanding projects in other applications (including Final Cut Pro) may render slowly but don't result in artefacts.
    Best wishes
    Obhi
    Message was edited by: obhi

  • Error in code page mapping for Source system whil loading the data from ECC

    HI Gurus,
    I am working in a implementation project, Recently our BI sand box is up, when i am doing my load from 0comp_code_attr it is throwing an error "Error in code page mapping for source system"(This is my first load from ECC).
    In details tab it is showing as the data is sent from the source system but the data is not reaching to the PSA.
    Please let me know if there are any settings needs to be made.
    Many thanks in Advance
    Jagadeesh

    HI V,
    Thanks for your quick response. I did it but it didn't resolve the issue. since the system id which i am having is 3 digits(LEC) but there it is taking only 2 digits, so i clicked on the button called Propose system ids, it has praposed LE, but the issue is stil there.
    Do we need to do any settings in LBWE??
    Thanks and Regards
    Jagadeesh

  • How to design EDW for source systems from different Time-Zones

    How to design EDW for source systems from different Time-Zones?
    Suppose IT landscape has a global BW in New York, and source systems in americas, europe and asia, then how the time-zones effect on time related things like delta selections on date or timestamp etc.

    As you said BW is global in NY, your source system must be global too. People from various locations can connect to same source system and thus timestamps for delta is always maintained as 1 single time. We have same scenario in our project. Our R/3 system is used by users in US and Europe. So we run deltas twice in day to make sure we got deltas from both locations.
    If scenarios was such that all locations connect to separate R/3 system, then obviously you have multiple queues. That is unique delta queue for each source system so deltas will be pulled as per data in respective queues.
    Abhijit

  • Creating mdf file from a database project in Visual Studio for Web

    I am very new to database programming in Visual Studio and SQL Server Express LocalDB. I went through a walk through of setting up a database project (using visual studio express 2013 for web and SQL Server Express LocalDB), adding tables and entering data
    and everything worked fine:
    http://msdn.microsoft.com/en-us/library/ms233763.aspx
    Then I wanted to move on to trying to build a simple application to access this database so I looked into the following tutorial:
    http://msdn.microsoft.com/en-us/library/ms171890.aspx
    In a nutshell the tutorial says to add a new datasource and navigate to the database file, and it is looking for an .mdf file. 
    The database project that I created does not have an mdf file in it, only sql file, visual studio project, dbmdl file, options file, source browser database, etc.
    How do I create this .mdf file, that step didn't seem to be explained in the first tutorial. I tried running the project, but didn't see any build options for creating the .mdf file. Again, sorry for the absolute beginner question. 

    Thanks edencorbin
    I am glad to hear that it was helpful and you succeed :-)
    With that said, It is time to close the thread :-)
    please mark responses that were part of the answer as the answer in order to close the thread. once at least one of the responses in a thread is marked as answer, the thread Icon changed into V and the thread look like it is close(you can continue working
    on a thread after this point, but usually new supporters will not check this thread).
    Have a good day :-)
    [Personal Site] [Blog] [Facebook]

  • VO Substitution : JBO-25006 : Invalid parameter value passed for source

    Hello All,
    I want to add 2 new fields (attribute columns) to an existing VO for which I am trying to use VO substitution. I have followed these steps.
    1.     Downloaded all the class files from server to local machine
    2.     Opened an OA project and extended the VO by changing sql query to add 2 attribute columns
    3.     Added 2 transient VO attributes to map them to the added fields in sql query
    4.     Create a BC4J substitution and imported jpx file using jpximporter
    While opening the page which consisted the original VO that I extended (creditRequestsVO), I am getting below error. Appreciate if anyone can throw any light on this.
    Exception Details.
    oracle.apps.fnd.framework.OAException: oracle.jbo.InvalidParamException: JBO-25006: Invalid parameter value creditRequestsVO for source passed to method ViewLinkImpl.setSource. Explanation: view def mismatch
    at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1247)
    at oracle.apps.fnd.framework.webui.OAPageErrorHandler.processErrors(OAPageErrorHandler.java:1435)
    at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2542)
    at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1892)
    at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:536)
    at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:424)
    at OA.jspService(_OA.java:212)
    at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
    at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:379)
    at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
    at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
    at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26)
    at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
    at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
    at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:619)
    ## Detail 0 ##
    oracle.apps.fnd.framework.OAException: oracle.jbo.InvalidParamException: JBO-25006: Invalid parameter value creditRequestsVO for source passed to method ViewLinkImpl.setSource. Explanation: view def mismatch
    at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:896)
    at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1169)
    at oracle.apps.fnd.framework.webui.OAPageErrorHandler.processErrors(OAPageErrorHandler.java:1435)
    at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2542)
    at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1892)
    at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:536)
    at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:424)
    at OA.jspService(_OA.java:212)
    at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
    at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:379)
    at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
    at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
    at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26)
    at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
    at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
    at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:619)
    oracle.apps.fnd.framework.OAException: oracle.jbo.InvalidParamException: JBO-25006: Invalid parameter value creditRequestsVO for source passed to method ViewLinkImpl.setSource. Explanation: view def mismatch
    at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:896)
    at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1169)
    at oracle.apps.fnd.framework.webui.OAPageErrorHandler.processErrors(OAPageErrorHandler.java:1435)
    at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2542)
    at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1892)
    at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:536)
    at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:424)
    at OA.jspService(_OA.java:212)
    at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
    at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:379)
    at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
    at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
    at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26)
    at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
    at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
    at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:619)
    Edited by: Bhavesh J Shah on Feb 22, 2010 1:58 AM

    Hi Rama,
    Parameter being passted to LeadHeaderDetailsVO is not right. Check the parameter values that are being passed,wether there are right or not
    Thanks
    Sandeep

  • Can't open X5 projects in RoboHelp 7 for Word

    After upgrading from X5 to 7, I tried to work on some
    RoboHelp for Word projects sent by a colleague who created them in
    X5. He and I are both working with Word 2003. The Explorer stops
    responding when I try to open one of these projects or one of their
    source docs.
    I have uninstalled and reinstalled Robo 7 and installed both
    patches & Robo seems OK. I can create and compile new, small
    test projects.
    But it will not work with the legacy projects. I noticed in
    the Task Manager that when Explorer stops responding, it appears as
    two Explorers in Task Manager. Is this expected behavior or a sign
    of an installation problem? I did not troll through the registry
    and delete every RoboHelp key before the most recent install. Do I
    have to do that?
    I tried deleting all the rtf files. No use. I tried importing
    one of the old docs into a new project. Explorer promptly stopped
    responding.
    Anyone know how I can either massage the old docs so that
    Robo will work with them or how I can fix the install?

    Go to either
    http://transferbigfiles.com
    or
    http://www.acrobat.com and use
    your Adobe ID to access Share.
    Upload the file and enter my email address. You can get that
    from the Contact page on my site.
    When it is uploaded, email me with a link to this thread.

  • Powerpoint 2011 Crashes When Entering Slideshow Mode attached to Projector.

    My MacBook Pro running Snow Leopard 10.6.8 crashes every time I try to enter slideshow mode in Powerpoint 2011 if I am driving a projector.  It does not crash if I enter slideshow mode without the projector, of if I connect to the projector but don't enter slideshow mode.  I give a lot of presentations, so this is a real problem.

    Confirm I have had the same problem with Office 2011 Powerpoint. Crash to unresponsive black screen, must force off with power button. 15" Mid-2010 MacBookPro 6.2 MC373C/A 4GB RAM and Snow Leopard 10.6.8
    Began slowly/intermittently in July when I was working daily with the pptx. Was then crashing with a 2nd monitor attached going into slide show mode. Crash problem became more frequent over time.
    Now the crash occurs with certainty in almost any configuration - slide show with 2nd monitor/projector, or without any monitor/projector or other peripherals attached, and with either the battery or 110v MagSafe power supply.
    I have tried creating an alternate user account - and the problem again starts randomly and acelerates in frequency.
    Uninstalled and reinstalled Office2011 for Mac as per MS instruction support pages. Same crash, on launch , when opening a file after launch, or when clicking onto a different slide if a successful launch does occur.
    Powerpoint at this time and in this condition is unuseable.
    Too bad because I have another presentation to prepare and give tomorrow, and I have already paid for and now depend on the MBP, and at this time the MSOffice2011 software.
    If anyone has solved why this problem is occurring (I see it occurs frequently enough that similar questions appear in many forums) - please share your insights and a solution if you have one? ThankYou.

  • How do we use Data rules/error table for source validation?

    How do we use Data rules/error table for source validation?
    We are using OWB repository 10.2.0.3.0 and OWB client 10.2.0.3.33. The Oracle version is 10 G (10.2.0.3.0). OWB is installed on Linux.
    I reviewed the posting
    Re: Using Data Rules
    Thanks for this forum.
    I want to apply data rules to source table/view and rule violated rows should go to defined error table. Here is an example.
    Table ProjectA
    Pro_ID Number(10)
    Project_name Varchar(50)
    Pro_date Date
    As per above posting, I created the table in object editor, created the data rule
    NAME_NOT_NULL (ie project name not null). I specified the shadow table name as ProjectA_ERR
    In mapping editor, I have projectA as source. I did not find error table name and defined data rules in table properties. It is not showing up the ERR group in source table
    How do we bring the defined data rules and error table into mapping?
    Are there any additional steps/process?
    Any idea ?
    Thanks in advance.
    RI

    Hi,
    Thanks for your reply/pointer. I reviewed the blog. It is interesting.
    What is the version of OWB used in this blog?
    After defining data rule/shadow table, I deployed the table via CC. It created a error table and created the all the source coulmns in alphabatical order. If I have the primary key as 1st coulmn (which does not start with 'A') in my source, it will apprear middle of of columns in error table.
    How do we prevent/workaround this?
    If I have source(view) in sch A, how do we create Error table in Sch B for source(view)?
    Is it feasible?
    I brought the error table details in mapping. Configured the data rules/error tables.
    If I picked up 'MOVE TO ERROR' option, I am getting "VLD-2802 Missing delete matching criteria in table. the condition is needed because the operator contain at least one data rule with a MOVE TO ERROR action"
    On condition Loading - I have 'All constraints' for matching criteria.
    I changed to "no constraints' still I get the above error.
    If I change to 'REPORT' option instead of 'MOVE TO ERROR' option, error goes off.
    Any idea?
    Thanks in advance.
    RI

  • Manadatory SP stack and which kernel version for source Release 4.6c

    Hello!
    I have the following questions:
    - Which support package stack and which kernel version are mandatory for Source Release 4.6?
    - Has the SAP Business connector still any supports?
    And some additional question regardind connection Lotus Notes with ERP 2005:
    - What is the procedure to connect Lotus Notes and ERP 2005 (Do we need RFC-connects or RFC/BAPI?)
    Can anyone help out or recommend how to proceed?
    Thank you!
    Regards
    Axel

    First I would like to recommend getting a good basis consultant to do that whole process. If you have never done such kind of big technical upgrade/conversion before it can become a totally frustrating experience.
    >  Do you all do Unicode Conversion first before going for upgrade process ?
    4.6c is not available as Unicode. During the PREPARE programs/transactions will be imported to the 4.6c system where you have to run all the preprocessing step mentioned in the Unicode conversion guide. After that is finished, the system is upgraded and immediately after the exported and to be imported as a Unicode system.
    Anyone have experience in doing CUUC to EHP4 under single upgrade ? My colleagues have upgraded 4.6C -> ERP 6.0 for EHP 1 only and we want to perform EHP4 and Unicode Conversion under single project. Appreciate anyone advice on this.
    There are many many things to look after, too much to list here in a forum. As suggested I'd consider getting a basis consultant with experience in that area.
    Markus

Maybe you are looking for

  • Can you move iTunes music/playlist from one computer to another?

    I have 2 computers. My original computer is a desktop that I originally put iTunes on. It's an emachine with windows XP. Currently it is not hooked up to the internet because we have wireless in the house. I am currently using an Acer laptop so I can

  • Interactive reports using ALV

    can i make interactive reports using ALV, like - using push putton, radio button, check boxes in ALV??? if yes, then can i find any example of them??

  • Keyboard on 13" acting strange

    I've got a MacBook 13" that I bought used, the previous owner had spilled Coke onto the keyboard, got it for cheap as the backspace key didn't work. I replaced the keyboard with a new (used) one, although it is Backlit (the original was not). Now non

  • Need help creating new film roll

    I followed all the instruction in the Help section and still can not create a new film roll--it's grayed out and I am unable to click on it. What is it that I am doing wrong? Please help!

  • Studio Creator 2 environment problem - cannot find symbol

    This may be a classic newbie question, but I've been looking for an answer without success for three days now. Hopefully, someone that is familiar with configuring Sudio Creator 2 Update 1 environment can help me fix this. Problem: Cannot build a sim