Projectm doesn't work with amarok anymore.

Not the most urgent issue in the world. I was just wondering if this happened to anyone else.

projectm is not working with amarok anymore because the package has been split in libs, xmms plugin and libvisual plugin. also as projectm now requires libvisual 0.4.0 it cannot be built for arch yet. many apps including amarok are not yet properly ported to libvisual 0.4.0 so we stick with 0.2.0.
amarok 1.4.1 in particular has libvisual 0.4.0 support but as a matter of fact crashes a lot when it is enabled. tpowa patched it back to use libvisual 0.2.0 because of that.
in essence, projectm currently does not work with amarok.

Similar Messages

Iphone remote doesn't work with itunes anymore.

I've replaced my wireless router in the last week, but I think remote still worked after that. I don't know what is going on. Firewall is turned off, bonjour is running (I can see the homesharing from another computer) But iphone remote doesn't find the library.

In iTunes > Preferences > Devices - check what remotes are currently paired, then remove any and start the process from scratch. Also, check you are signed into iTunes with the same account on your phone and mac.

Push mail on iPhone doesn't work with my .mac address, all other accounts working fine. Does anybody experienced problems like this?

Since upgrading to IOS 5 and using icloud my .mac account doesn't work with push anymore. I'am using two other mail accounts with push function and they work fine. I have heard from other users havong same problem, but does anybody have a solution to this? I have deleted the account and set it up again, worked for one test mail and then failed onwards..

Since upgrading to IOS 5 and using icloud my .mac account doesn't work with push anymore. I'am using two other mail accounts with push function and they work fine. I have heard from other users havong same problem, but does anybody have a solution to this? I have deleted the account and set it up again, worked for one test mail and then failed onwards..

Numbers 3.2 has changed too much, it doesn't work with my project anymore. How do I revert back to the previous version I was using?

Numbers 3.2 has changed too much, it doesn't work with my project anymore. 1) The sheet panels used to be on the left hand side and easily reviewable and searchable, but now they are on the top and it's harder to find a specific folder without scrolling (too time consuming), 2) I used to be able to duplicate a folder within my sheet panel window by simply clicking on a folder and hitting Command D, but that doesn't work now so it looks like I'll have to spend even more time to recreate the same tables that used to be easily duplicated, and 3) I can't choose fill colors that matched my project anymore because there are only limited choices available now. And these are only the changes that I'm aware of. I am very disappointed and frustrated. Whatever the motivation was to limit Numbers 3.2, I want the previous version back. How do I revert back to the previous version I was using?

The sheet panels used to be on the left hand side and easily reviewable and searchable, but now they are on the top and it's harder to find a specific folder without scrolling (too time consuming),
You can scroll more quickly between sheets if you don't use the left-right triangles, but instead move the cursor up into the bands with the "tabs" and drag right or left.
Also, if you have a lot if sheets for which you want a quick vertical list, then you can try the following have something like this pop up (showing your sheet names automatically) whenever you hit a keyboard shortcut (in my case shift-command-j):
This is done via a Jump to Sheet Automator Service (Dropbox download). To install just doubleclick the .workflow package and (if needed) click 'Download Anyway' in System Preferences > Privacy & Security.
This will cause a new item to appear in your Numbers > Services menu. Then, if you want a keyboard shortcut, go here in System Preferences and add one:
You can rename or remove the service by holding down the option key in Finder and choosing Go > Library > Services. You can also view the AppleScript contaned within the service by opening the .workflow package in Automator.
This particular service jumps to the first cell of the first table of the sheet you choose from an automatically generated list of all sheets in the current document.
SG

My 2011 iMac doesn't work with display sleep anymore after installing a clean copy of OSX 10.8 Mountain Lion

My 2011 iMac doesn't work with display sleep anymore after installing a clean copy of OSX 10.8 Mountain Lion.
I have it on upper left corner but it take the whole computer to sleep, no way to turn just the display.

Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

Trying to load illustrator 6cs onto new mac and the old activation code for my ill cs doesn't work with it

Trying to load a downloaded version of illustrator 6cs onto new mac and the old activation code for my illustrator cs doesn't work with it. Do I need a new code or am I missing something? Same goes for my Photoshop cs.

you need your serial number.
if you purchased from or registered with adobe check your account, https://www.adobe.com/account.html

Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro

Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro when plugged in with a dvi to mini dvi cable. Any ideas what to do to make it work? I lugged the 23" 2500 miles into the wilderness and I need help

Okay, here's an update: the DVI to ADC adapter does work with the Apple displays that I have tried, but it won't work with the Formac. I have tried multiple time to contact them, but to no avail... they don't even respond to threats of posting my opinion of them, which is this:
DON'T BUY ANYTHING FROM FORMAC! They make quality products, but their customer service is a big time joke! They won't take care of you.

HT201210 hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

TS1253 I have a printer epson TX210, but it doesn't work with my time-capsule. What need to do?

I have a printer epson TX210, but it doesn't work with my time-capsule. What need to do?

What have you tried?
You are going to get nowhere quick with the 6.1 utility in Mountain Lion if this is the only OS you have available.
Look up how to install 5.6 utility under ML. At least then you can see printers. That is assuming you are trying to use USB.
Has this worked ever on Mountain Lion? Did you download the drivers for that printer for ML?
Plug it into a computer directly.. does it work? If it doesn't work locally it sure will not work via the network.

IPod doesn't sync with iTunes anymore!! HELP!!

I am in complete despair - my iPod doesn't sync with iTunes anymore. It all started a couple of days ago, after installing the latest updates of both, iTunes and iPod. After that, I noticed that the iPod wasn't synching the changes and new additions I had made in iTunes.
I tried everything so far with no success. I did reset the iPOd, reinstalled the iPod updater, than did a RESTORE and now my iPod is completely empty, but refuses to download my music from iTunes.
When connected, it shows up, start "updating iPod" and several seconds later shows "update complete". In the iPod window I can all the songs (in grey) from my library, but they are not being transferred to my iPod!!!
Please, help!!

I think I know the problem and it's solution. The iPod "thinks" it's linked to a different library and therefore does not synchronize. No idea what happens in the background there, but here is what I did:
First, I went back to the previous update on the iPod (not sure if that's necessary at all, but I just wanted to go to where I started from.
The UNinstalled iTunes (to be safe I backed up my tunes) and reinstalled it. Then pasted backed up tunes into new iTunes music folder and overwrote newly created iTunes library files.
Then I connected the iPod, which now told me that I had an old version and needed to update, which I did.
Then a window popped up and told me that my iPod was connected to a different library and if I want to connect to this one, overwriting everything on the iPod, which I said yes to (it didn't matter anyway, since it was now empty after the RESTORE I had done).
iPod then downloaded all the songs from my library again and we are as happy together as we've been before
I think what happened was that after installing the latest update, that window with the "different library connection" had popped up as well and I must have clicked NO because of the "overwrite" comment which scared me. Unfortunately, even with "reset warnings" it then never popped up again and until I reinstalled iTunes.
Hope this helps!

My i pod nano first generation doesn't work with windows 8

My i pod nano first generation doesn't work with windows 8

Howdy yvesmd,
Thanks for using the Apple Support Communities.
If your iPod nano is not being recognized in iTunes on your Windows computer, then I'd like you to please follow the directions in the link below.
Apple - Support - iPod - iPod nano Troubleshooting
Cheers,
Alex H.

Quicklook doesn't work with .avi files

Hello, i've got a little problem right here on my mac. The thing is that I used to have Snow Leopard as a OS and quicklook used to work great, it opened all the extensions I used to work with. The thing change when I format my HDD and installed a clean copy of Lion OS. Now quicklook works fine as it used to but not any more with .avi files. I remember that this feature was working great on my previous OS, and it's really important for me to find a solution because quicklook is an absolutely amazing feature of our Macs.
I've tryed to download plugins, restoring permissions or even trying it with a guest user, but no success.
Please help me. If you need more info about specs or something i'll be glad to give them to you.
Thank you!!!

Also doesn't work with Grapher (.gcx) documents (an Apple format).

The Bluetooth on my 2012 Lexus doesn't work with my iPhone 5. My old android phone worked perfectly with my car. Even the tech guy at Lexus couldn't get it to work. What is apple doing to fix this.

The Bluetooth on my 2012 Lexus doesn't work with my iPhone 5. My old android worked perfectly with my car. Even the tech specialist at Lexus couldn't get it to work. Lexus said that other iPhone 5s were having the same problem. What is apple doing to fix this?

Going to the local Apple store this morning...
My problem is not uncommon as the board is showing signs of this happening to many others as well. That is where I found the restore and reboot information to try to solve the issue of crashing apps.
I understand that Apple will not "give away the cow", but letting iPhone users know that the problems they are having are being addressed by Apple is a little more comforting than nothing at all. Other wise, all the apps in world are useless and even more importantly worthless, if a person has to reset/reboot/reload just to get them to work.
IF Apple can not address the basic problems with todays iPhone apps, why should one believe that the iPhone 3.0 OS is any better? Using a PC comparison, which is better, XP or Vista. If the current iPhone OS of 2.2. what ever is not working that well (as related to down loaded apps and iTunes), will OS 3.0 be any better?
The waste of time I refer to is in going to the apps store and downloading the apps... Again why by apps if the free version does not work?

Satellite M40-129: PCMCIA Card doesn't work with Linux

I have D-Link DWL-G650 with Atheros Chipset which is good supported under linux (madwifi). But if I boot Linux the card is not found. I tested the card with an Fujitsu Siemens Notebook and it worked out of the box!
Any idea why it doesn't work with my M40-129 ?

Hi
Like you know Toshiba doesnt support the Linux and there are no Toshiba drivers for the Linux OS but I was able to find this useful Toshiba page about the notebook configuration with Linux:
http://newsletter.toshiba-tro.de/main/
You should check the OS machine compatibility and the other areas.
Im sure you will find many useful tips.
Good luck

HT5706 I am trying to set up Apple TV with my Uverse WiFi, but I get errors when entering my password. One site said that Apple TV doesn't work with WPA which Uverse uses. Is there anyway around this or will Uverse and Apple TV just not work together.

Trying to set up Apple TV with ATT Uverse. I get errors when trying to enter my WiFi password. One site says that Apple TV doesn't work with Uverse because it uses WPA for encryption. If true, does that mean Uverse subscribers cannot use Apple TV?

Spurs63 wrote:
does that mean Uverse subscribers cannot use Apple TV?
No, that's a rather silly conclusion.
There are two options:
stop using the crappy router provided by the ISP.
Physically connect the ATV to the router via Ethernet.

Projectm doesn't work with amarok anymore.

Similar Messages

Maybe you are looking for