Projector setup with my MacBook Pro

When I properly set up my MacBook Pro 5,4 with my projector, it only displays slideshows in Powerpoint; otherwise it shows the purple Apple screen. Is this a resolution setting issue, or something else? I want to project whatever is on my desktop.

In that case follow these instructions:
1. Boot OS X Recovery by restarting the computer while holding the ⌘ (Command) and R keys.
2. When the Mac OS X Utilities screen appears, select Utilities from the Menu Bar, then click Terminal.
3. In the Terminal window, type resetpassword and press Return.
4. The password reset utility window will appear.
Do not select a new password.
Instead, click the icon for your Mac's hard disk at the top. From the dropdown below it, select the user account with the problem.
5. At the bottom of the window, you will see Reset Home Directory Permissions and ACLs. Click the Reset button.
The reset process may take a couple of minutes. When it finishes quit the programs and restart your Mac.

Similar Messages

Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question. When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and

Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question.
When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and last name).
I changed the computer name in Preferences/Sharing to a new name and Preferences/Accounts to just be Mike. I can right click on my account name, choose advanced, and see that everything looks right.
However, If I do a scan of my network with my iPhone using the free version of IP Scanner, it lists my computer as First-Lasts-MacBook-Pro! And it lists the user as First-Last.
So even though another Mac just sees my new computer name, and my home folder is Mike, somewhere in the system the original setup with my full name is still stored. And it's available on a network scan. So my full name might show up at a coffee shop.
Can I fully change the name without doing a complete re-install of Lion and all my apps?

One thought... you said the iPhone displayed your computer's old name? I think that you must have used the iPhone with this computer before you changed the name. So no one else's iPhone should display your full name unless that iPhone had previously connected to your Mac. For example, I did this exact same change, and I use the Keynote Remote app to connect with my MacBook Pro. It would no longer link with my MacBook Pro under the old name, and I found that I had to unlink and then create a new link under the new name. So the answer to your question is, there is nothing you need to do on the Mac, but rather the phone, and no other phone will display your full name.

External VGA Projector Screen Blue when MacBook Pro Connected

I love using my laptop for Powerpoint and Keynote presentations at work. I used to have a Powerbook 1.5GHz 15" and now have a MacBook Pro 2.2GHz 15". With some external VGA projectors, after connecting the MacBook Pro, everything works great. I turn off mirroring and my presentation goes smoothly.
However, with some particular external VGA projectors, I get a connection problem. After using my DVI-to-VGA cable to connect my MBP to the projector, nothing happens. The projector continues to project a blue screen as though nothing is connected to it and as though it has no video source. I've cycled through the projectors input selections hoping the projector would find the signal but still nothing. I've even restarted my MBP with the cables attached to the projector and still the projector shows a blue screen.
My friends can connect their PC Windows XP and Windows Vista computers to this same projector with no problems. I used to have this same problem with my PowerBook G4 which is one of the reasons I upgraded to the new MBP hoping this problem would be resolved. What's wrong and what can I do to get my MBP compatible with the external projector?

Sorry, I meant the cable that links between the connector and the input to the projector (RGB - IN by the way, not OUT).
We have a number of these VGA cables at my place of work that will work with a PC but not a Mac. Some are fine. My technician holds on to a cable for me that we know works and if I get a bad one, he brings in the replacement and it takes a few seconds to go online. I also note that some of the projectors (particularly ceiling mounted ones) have an additional adapter between the cable and the projector. It may be that some of the pins are not connected.
Of course, if the projector is mounted too high, that would not allow easy replacement.
I would suggest finding a cable that works and carrying that around.

Is anyone using NETGEAR Push2TV with a MacBook Pro and AirPort Extreme and does it work well for you?

I am interested in buying a NETGEAR Push2TV display TV streamer to use with my MacBook Pro and AirPort Extreme.
I saw on the Netgear site that a Intel Wireless Display/WIFI driver software is required for PC's; do we have this software installed already on our MacBook Pro's? Is any one using this box and does it work well for you, any problems or setup issues?

trying to find out same thing , store said works with new intel processor, My mini dont finding.....

I'm using Logic 9 with a Macbook Pro. On one project I'm getting a message ' not enough processor power.' I've tried freezing all tracks but this seems to have no effect. I've also bounced all soft synths to audio.

I'm using Logic 9 with a Macbook Pro. On one project I'm getting a message 'not enough processor power' and the computer stops playing
I've tried freezing all tracks but this has no effect. I've also bounced all soft synth tracks to audio, but to no avail. The computer stops playing
even at the start of the track where there is nothing but a kick drum happening.......

Thank you for the suggestions.
I had previously tried all of the above but the airport/wireless thought. Unfortuneately, none of these things made a difference, including the wireless suggestion.
Currently, I am using my Mac's "cheapo" internal audio hardware (haha). I have a one year old 27-inch iMac, a good pair of bose speakers, and a polk sub. I don't believe it is an issue with my setup, considering I completely disconnected and unplugged it.
I did, however, do a little info hunting on the internal audio situation, since I was curious what is actually included, and I stumbled upon this interesting little tidbit about my model of iMac:
https://discussions.apple.com/thread/2718054?start=0&tstart=0
I had previously wondered if I was hearing my mouse in my speakers as well (not just in logic). It appears that this model of iMac may have some grounding issues, as someone later in the thread suggested purchasing and using a ground loop isolator, which seemed to fix any extra interference for them.
Ironically though, I have since opened logic, and do not seem to be encountering my previous static issue(yet).
Fingers crossed, hoping that I will not be experiencing it again. Going to purchase a ground loop isolator, and continue to mess around with logic, just to make sure it was not just an internal audio issue with my iMac.

Setting up D-Link DIR-615 wireless N router with a macbook pro

Hello all.
I am trying to setup a D-Link DIR-615 wireless N router with my macbook pro. I got the router, opened it, put in the startup CD, and nothing works.
I went to the D-Link site and it says that the CD is not compatible with mac's, but to look on pages 10-15 in the user manual ( on the CD), which I did and found nothing related to setting up the router on my mac.
So I'm at the very beginning (putting in the initial CD) of setting this up, and wondering how to do it. Can anyone guide me through it or point me to a thread or online description of how it's done. I have very little computer background but I can pick it up decently when I have to, so please help as I will be very grateful. Thanks,
Jonathan

Unfortunately as with most routers it will be a manual affair that is quite involved. The first thing is to connect to the router over ethernet, so you should connect the cable supplied between the computer and the router and turn the router on. Go to System Preferences and open the Network panel, make sure the DCHP setting is automatic, you should have a connection if it is already on auto, there will be numbers in all the boxes when connected. In the documentation for the router you should find an IP address for the web interface along the lines of 192.168.0.1 (this seems to be the correct one for D-Link), open Safari (or another browser if you want)put this number in the address bar and press return. There will probably be a request for password at this stage, this will be in the documentation or on the bottom of the router, fill it in and you will get to the web interface. You should then be able to follow the instructions in the router documentation to set it up. It should be fairly easy through the basic setup procedure as long as you know your internet settings.

How do i use an external display with my macbook pro?

How do I use an external display with a macbook pro?

Just buy the proper adapter cord, such as MiniDisplay port to HDMI for example. Plug it in and it will be automatically recognized. Use System Preferences > Displays to set options.
The display can Mirror your primary desktop or Extend the Desktop.
Regards,
Captfred

Hi Apple Team, my iphone can't share files with my macbook pro. But other devices can share bluetooth files with my mac book pro. Please, kindly open up bluetooth to accept all connections from all devices. Now it becoming difficult for me to share.

Hi Apple Team, my iphone can't share bluetooth files with my macbook pro. But other devices can share bluetooth files with my mac book pro. Please, kindly open up bluetooth to accept all connections from all devices. Now it difficult for me to share bluetooth files from my mac bookpro to my iphone, unless i attached it through email.
We need it to be acceptable to all devices.
Thank you!

You can tell Apple directly at the link below.
http://www.apple.com/feedback/iphone.html

Synced iphone with my macbook pro, can find the voice memos, help!!

i synced my iphone with my macbook pro, checked the voice memos option and after syncing was complete (it backed up iphone in the process), i didn't see any new playlist called voice memos on my itunes!! did i lose my voice memos? where did they go? i didn't delete anything from either the phone or the computer.TIA!! on the phone, i don't see the memos too!! anyone has any idea?

iTunes automatically syncs voice memos to your iTunes library when you connect iPhone to your computer. Voice memos are synced to the Voice Memos playlist. iTunes creates the playlist if it doesn’t exist. When you sync voice memos to iTunes, they remain in the Voice Memos application until you delete them. If you delete a voice memo on iPhone, it isn’t deleted from the Voice Memos playlist in iTunes. However, if you delete a voice memo from iTunes, it is deleted from iPhone the next time you sync with iTunes.
You can sync the iTunes Voice Memos playlist to the iPod application on iPhone using the Music pane in iTunes.
To Sync the Voice Memos playlist to iPhone:
1. Connect iPhone to your computer.
2. In iTunes, select iPhone in the sidebar.
3. Select the Music tab.
4. Select the “Include voice memos” checkbox and click Apply.

How can I use an A1082 monitor with my MacBook Pro?

I received an apple A1082 monitor this past weekend from a friend and we couldn't, and still can't, figure out how it can be used with my MacBook Pro. I know that I need an adapter, but where does it get power from? Thanks in-advance. Richie.

<http://support.apple.com/kb/HT2803>
<http://www.ebay.com/bhp/apple-cinema-display-90w-power-adapter>

How do I view an external display with my macbook pro closed?

How do I view an external display with my macbook pro closed? I am using a wireless keyboard and trackpad, and I would like to use a larger (Dell) monitor with my Macbook Pro closed.

Here are the rules for Clamshell mode:
http://support.apple.com/kb/HT3131

Can I use an USB disc with my macbook pro bought in 2005. What capacity will it take 2.00 or 3.00?

can I use an USB disc with my macbook pro bought in 2005. What capacity will it take 2.00 or 3.00?

The first MacBook Pro's were not released until the beginning of 2006, and they had USB 2 ports.
Anything available new in 2005 would have been a PowerBook G4 and they also had USB 2 ports.
A USB 3 disk will just transfer data slower then it could do, if you plug it into a USB 2 port though, so you can buy either.

How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something"sign... it just doesn't start the system....

How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something" sign... it just doesn't start the system....
Please help
Marcelo

If there is no loading bar, it's usually a problem with a third party kext file in OS X itself.
You can press the power button down to force a hardware shutdown, then reboot holding the shift key down on a wired or built in keyboard, this will disable them and you go around and update your third party software.
Gray, Blue or White screen at boot, w/spinner/progress bar
Also take this time to backup your users files off the machine if possible.
Most commonly used backup methods
Sometime that won't work and you need to do more
..Step by Step to fix your Mac

How do i use my HDMI cable with my macbook pro?

I just bought an HDMI cable and an adaptor to use with my Macbook Pro and I am having trouble setting it up correctly. I have it hooked up to my computer and TV and when I open my computer the galaxy screen savor just stays on my TV screen. What do I do?

Have you opened SYSTEM PREFERENCES>DISPLAYS? You make your settings there. For details, please look at the column on the right labeled 'More Like This'.
Ciao.

After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!

After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!
iTunes is a mess! It couldn't find it's own libraries and I was forced to create a new one. Now I don't know where my music is or if any's missing.

columbus new boy wrote:
How crap is that?
It's not crap at all.
It's not that simple. For example, I've 3500 songs on my MacBook but don't want them all on my phone, so I have to manually select each song again???
There has to be a solution.
Why not simply make a playlist with the songs you want on the iPhone?
and maintain a current backup of your computer.

Projector setup with my MacBook Pro

Similar Messages

Maybe you are looking for