Proliant ML110 G5 Server Problem

Hey,
While upgrading some ran within this machine, its stopped working it wont even boot. Once the power button is p[ressed all the fans go on full pelt and nothing is displayed and no beeps.
I've reset everything asnd tried the old ram and tried a new psu and nothing is working.
The heart led flashes, the standby led is solid (When on and off) and when the power button is pressed the PSU led is solid.
Any help.
Regards
Gareth

Hi, Gareth:
I recommend you also post your question on the HP Business Support Forum -- ML Servers section.
http://h30499.www3.hp.com/t5/ProLiant-Servers-ML-DL-SL/bd-p/itrc-264#.UxNtbemPK9I
Best Regards,
Paul

Similar Messages

HP Proliant ML350G4 server - problem with array

Hi, I have HP Proliant ML350 G4 server. The problem is that I can not configure the array for SCSI hard drives. When I run the Array Configuration Utility from the SmartStart CD, I get the message: "ACU did not detect any supported controllers in your system." How do I solve this problem?

Hi:
You may also want to post your question on the HP Business Support Forum -- ML Servers section.
http://h30499.www3.hp.com/t5/ProLiant-Servers-ML-DL-SL/bd-p/itrc-264#.U48mculOW9I

Need Video Driver for Proliant ml110 G6

I need hardware drivers - video - chipset, etc and I have looked and Googled everywhere. Not on the Easy Setup CD or HP Drivers site. Help?
System: HP Proliant ml110 G6
OS: Windows Server 2008 R2 (x64)
This question was solved.
View Solution.

Hi:
Below is the link to the Matrox driver page.
They don't seem to support the MGA G200 card for 64 bit anything.
http://www.matrox.com/graphics/en/support/drivers/latest/
I suggest you post your question in the HP Business Support Forum -- ML Servers section.
http://h30499.www3.hp.com/t5/ProLiant-Servers-ML-DL-SL/bd-p/itrc-264
Me? I woujld just buy a new windows 7 capable video card and be done with it.
Best Regards,
Paul

HP ProLiant ML110 G7 Intel Xeon E3-1220 RAID 1 with hot swap configuration

Dear All;
Am going to purchase 'HP ProLiant ML110 G7 Intel Xeon E3-1220' server partnumber '470065-591'. I want to know little more about its RAID controller. The above mensioned server having only two 500GB HDD. I want to configure RAID 1 on it and i want to add one more HDD 'HP 500GB 3G SATA 7.2K 3.5in MDL HDD' as hot swap for the RAID 1. here are my questions
1) it support RAID 1
i checked on few blogs. then i confirm I can configure RAID 10 with two HDD. so it will work same as RAID 1.
2) it will suport hot swap
actually first time am going to install RAID. Thats why am asking these questions.

Hi:
I recommend you also post your question in the HP Business Support Forum -- ML Servers section.
http://h30499.www3.hp.com/t5/ProLiant-Servers-ML-DL-SL/bd-p/itrc-264
Paul

How to convert HP Proliant ML110 to Windows xp

Hello
Someone recently gave me a HP Proliant ML110 computer, which, according to what I have read is a server computer. It was running Umbutu which I could not navigate and I did not want to use it as a server so I put windows xp on it. It works pretty good except when I changed it over, it lost its Ethernet Controller driver and I can't seem to find it, also, I don't know if it would work on this computer now that I've changed it over. I am trying to load my Verizon DLS software on it but it keeps saying it can't read my DSL connection, even though when I go into Control Panel and Network, it shows that my Westell DSL modem is connected and when I go into Device Manger, there is a big yellow question mark next to Ethernet Controller,and PCI Parallel Port and when I click on the question mark, it says no drivers are installed and when I ask it to search for one, it comes back empty.
Can anyone help me on this?
Thanks!

Hi Paul
Thanks, I was able to add it.
I still have some other issues I hope you can use your expertise to help me with.
1)When I go into device manager, there is that yellow question mark above thePCI Parallel Port and I am not sure what this is. It says that no driver is installed.
2) Also, there is a yellow question mark above the Video Controller. when I run DXDIAG, it says that the computer is using a generic video driver and to please use the one from the manufacturer. I have a lot of games that require 3D acceleration and I can't get them to run properly and I am not even sure this computer as that capability.
3) I use Verizon DSL and I cannot get my computer to recognize the modem, however I can still use the modem, I just can't load the software because it cannot detect my modem. when I try to go into Control panel and add the modem, it won't do it and it can't detect it.
I know this is a lot but whatever help you can give me would be much appreciated!
thanks Paul

How to fix "server problem" error message when trying to use PhoneGap build service.

I have a site that is now optimized for mobile devices and want to use the PhoneGap Build service in Dreamweaver CS6 to make a native app. Unfortunately, I keep getting the "We seem to be having server problems." error message when I try to create a new project. I did notice that the configuration file was created at the site root. I've seen a few other similar threads on this, but no solution. I've checked on any firewall issues (none) and know that the PhoneGap server is not down. The problem is on my end.
Thanks,
Loren

Not an answer to the server problem, but I have posted the PhoneGap Build process here: http://forums.adobe.com/message/4669054#4669054. It might help anyone still having problems.

[Fwd: Starting Managed server problem ......]

Forwarding to the security news group...
-------- Original Message --------
Subject: Starting Managed server problem ......
Date: 1 Jun 2004 23:02:53 -0700
From: Sameer <barsatkiraat2001>
Newsgroups: weblogic.developer.interest.management
Hi All,
I need you guy's help in this regard, that I am using solaris 8 and
installed Weblogic8.1 Server.
My Scenario is;
Have configured Admin Server and Managed server with nodemanager on one
unix machine.
So, what am facing the problem;
I am not able to get run Managed server after starting the nodemanager
and admin server, getting the error in nodemanager logs that is :
<Jun 2, 2004 9:44:26 AM GMT 04:00> <Warning> <Security> <BEA-090482>
<BAD_CERTIFICATE alert was received from PortalQA - 10.12.10.94. Check
the peer to determine why it rejected the certificate chain (trusted CA
configuration, hostname verification). SSL debug tracing may be required
to determine the exact reason the certificate was rejected.>
And in Admin Server logs it's saying;
<Jun 2, 2004 9:44:26 AM GMT 04:00> <Warning> <Security> <BEA-090504>
<Certificate chain received from PortalQA - 10.12.10.94 failed hostname
verification check. Certificate contained AdminQA but check expected
PortalQA>
The WebLogic Server did not start up properly.
Exception raised:
'weblogic.management.configuration.ConfigurationException: Due to faulty
SSL configuration, this server is unable to establish a connection to
the node manager.'
<Jun 2, 2004 9:44:26 AM GMT 04:00> <Warning> <NodeManager> <BEA-300038>
<The node manager is unable to monitor this server. Could not create an
SSL connection to the node manager. Reason :
[Security:090504]Certificate chain received from PortalQA - 10.12.10.94
failed hostname verification check. Certificate contained AdminQA but
check expected PortalQA>
Reason: weblogic.management.configuration.ConfigurationException: Due to
faulty SSL configuration, this server is unable to establish a
connection to the node manager.
<Jun 2, 2004 9:44:26 AM GMT 04:00> <Emergency> <WebLogicServer>
<BEA-000342> <Unable to initialize the server:
weblogic.management.configuration.ConfigurationException: Due to faulty
SSL configuration, this server is unable to establish a connection to
the node manager.>
If some one can help me, I do appreciate in all due respect.
Sameer.

Hello Satya/All,
I'm also experiencing the exact problem you are facing. It would be great if
somebody could help in this regard at the earliest.
Thanks, senthil
Satya Ghattu <[email protected]> wrote:
Forwarding to the security news group...
-------- Original Message --------
Subject: Starting Managed server problem ......
Date: 1 Jun 2004 23:02:53 -0700
From: Sameer <barsatkiraat2001>
Newsgroups: weblogic.developer.interest.management
Hi All,
I need you guy's help in this regard, that I am using solaris 8 and
installed Weblogic8.1 Server.
My Scenario is;
Have configured Admin Server and Managed server with nodemanager on one
unix machine.
So, what am facing the problem;
I am not able to get run Managed server after starting the nodemanager
and admin server, getting the error in nodemanager logs that is :
<Jun 2, 2004 9:44:26 AM GMT 04:00> <Warning> <Security> <BEA-090482>
<BAD_CERTIFICATE alert was received from PortalQA - 10.12.10.94. Check
the peer to determine why it rejected the certificate chain (trusted
CA
configuration, hostname verification). SSL debug tracing may be required
to determine the exact reason the certificate was rejected.>
And in Admin Server logs it's saying;
<Jun 2, 2004 9:44:26 AM GMT 04:00> <Warning> <Security> <BEA-090504>
<Certificate chain received from PortalQA - 10.12.10.94 failed hostname
verification check. Certificate contained AdminQA but check expected
PortalQA>
The WebLogic Server did not start up properly.
Exception raised:
'weblogic.management.configuration.ConfigurationException: Due to faulty
SSL configuration, this server is unable to establish a connection to
the node manager.'
<Jun 2, 2004 9:44:26 AM GMT 04:00> <Warning> <NodeManager> <BEA-300038>
<The node manager is unable to monitor this server. Could not create
an
SSL connection to the node manager. Reason :
[Security:090504]Certificate chain received from PortalQA - 10.12.10.94
failed hostname verification check. Certificate contained AdminQA but
check expected PortalQA>
Reason: weblogic.management.configuration.ConfigurationException: Due
to
faulty SSL configuration, this server is unable to establish a
connection to the node manager.
<Jun 2, 2004 9:44:26 AM GMT 04:00> <Emergency> <WebLogicServer>
<BEA-000342> <Unable to initialize the server:
weblogic.management.configuration.ConfigurationException: Due to faulty
SSL configuration, this server is unable to establish a connection to
the node manager.>
If some one can help me, I do appreciate in all due respect.
Sameer.

Photoshop CS2: name server problem: Is there a solution?

Hi!
I have Photoshop CS2. I can't start the program anymore because of the already well known name server problem... (DEAR ADOBE!! HOW COULD YOU!!! )
Now, what can I do? As far as I know I purchased the software for an unlimited amount of time (thanks to the fact that there weren't any clouds, halleluja!)
Can anybody help me, please? Is there a way "around"?
Thanks a lot!!!
Christiane

Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

I keep getting Server problems when trying to sign into messages

Hi can anyone help, I have an Imac, and Lion X 10.7.3, I have downloaded Messages Beta, evertytime I try to register it will not let me, telling me Server Problems try again later? Has anyone come across this? And can anyone help? Thank you.

Hi can anyone help, I have an Imac, and Lion X 10.7.3, I have downloaded Messages Beta, evertytime I try to register it will not let me, telling me Server Problems try again later? Has anyone come across this? And can anyone help? Thank you.

I recently updated Firefox and now it will not open. It says there is a proxy server problem.

I was requested to update the program and now it says there is a proxy server problem.

Hi:
You can try this COMPRESSOR TROUBLESHOOTING document:
http://docs.info.apple.com/article.html?artnum=302845
Hope it helps !
Alberto

Firefox periodically drops my Verizon/Yahoo email site indicating it cannot find the server. Verizon alledges there are no server problems.

My email page will crash and the message received is:Firefox can't find the server at us.mc844.mail.yahoo.com. Repeated reloading does not help. After a period of time from 5 minutes to an hour the site can be accessed and is Ok for several days. The the problem reoccurs several times in the same day. When my email provider is contacted they indicate no server problems.

Report your error messages so your peers, like me, can make suggestions..
Official recommendations are on http://help.yahoo.com/l/us/verizon/mail/ymail/basics/mail-12859445.html NOTE THE URL's Stick with them if using YAHOO. I have not found a newer recommendation for pop.yahoo.verizon.net that you mention, and the help page was updated this month.
Note some have had trouble with missing intermediate certificates so get encryption errors. Shouldn't happen (except if you are missing the root certificate, which is your responsibility), but can be fixed by installing manually.
Some have reported needing to specify [email protected] rather than just userid, I believe on the SMTP side. Normally you specify only userid and password without the @verizon.net.

Mail Server Problem

The mail server problem has been resolved, mail is working as designed....yeah!!

silly discusting board, I've got 3 replies in my email but it's not showing here ...
anyway, this time I found after some chasing my tail .... that the mail preferences had wiped my password and I needed to reinstall it, then instruct it to go online and some other click stuff ....
and it seems to be ok now ....
but each round in past 2 weeks has been different "fix" .... or wait ....
sorry for anyone without master email for 5 days, that's just not right ....
I'm afraid that as apple starts "giving away" email accounts to build the cloud into something much bigger than the mobile me was .... that their folo up will fail and we will find ourselves not with the same apple durability / consistency but with the "hey it's free" attitude ....
let's see

Email server problem - failed to connect to server

Since Friday 27th August I've been having trouble connecting to the email server for my BT Yahoo account. It simply can't find the server, even though none of the account settings have changed and it has worked fine for years. Weirdly, sometimes it works and emails come through (so the settings are obviously fine) but then it will stop working for no apparent reason. I use Thunderbird as my email client, but I tested the account in Outlook Express and it gives the same error. The account works fine over webmail, and through my iPhone, however.
It seems like this is a DNS error rather than software related - is there anything BT-related that could be causing this, or any simple fixes? I've tried rebooting the HomeHub but that doesn't seem to have made a difference. I work from home, so this is a really annoying problem.

Lynx wrote:
Interesting - we have exactly the same problem. Haven't been able to download for days. This has happened with two different computers with different anti-virus systems - so one assumes it's not suddenly that. I can access my e-mail online and reply (having to bcc myself, so when it does eventually work I have copies on my outlook express. It was working perfectly one night and the next morning just stopped - nothing happened in between.
I have tried to find out what the error number means, but no-one - not even BT's Help section - seem to have the solution. Have you ever seen the Eddie Izzard sketch on YouTube? This is definately one of those moments!
If you find a solution - would really appreciate you posting it on here, so I can fix mine. Will do the same for youi.
Hi.
This sort of problem is hard to determine. It could be a few things, including a corruption of the mail account (which can last for a short time or a number of days), it could be a local problem - which you've ruled out by the different computer check, or perhaps a "stuck" email - say one which is spam/virus attached and the online checking systems failing to pass through it, or possibly a stale IP address.
The latter 2 are easy to check, the first via webmail and see if there is anything near the "top" of the list that may cause a problem, moving to a new folder, and try again. The last can be tried by power cycling the router to get a new IP address. Disconnect the broadband and router for say 15 minutes and then reconnect to try again.
If there was a major server problem, there would be lots more complaints.
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

I have just installed Lion OS and Face Time encounters server problems on sign up. I have sought the firewall problem without success and even temporarily turned off firewall with no success.

I have just installed Lion OS and Face Time encounters server problems on sign up. I have sought to rectify the firewall problem without success and even temporarily turned off firewall with no success. Any ideas?

Some folks have discovered that changing their DNS service fixes FaceTime connection issues.
The ideal way is to configure your modem/router with DNS service, but often settings in System Preferences/Network/Advanced/DNS on your Mac will override the router settings. Try either of these;
OpenDNS
208.67.222.222, 208.67.220.220
Google Public DNS
8.8.8.8, 8.8.4.4

TS4002 Anybody having icloud server problems today? No incoming mail

Dear all,
I'm not receiving any mail guz Icloud tells me it has a server problem. I can send mail but not receive any. I can send myself a message using gmail sending it to my own gmail adres and I receive in my Mail program, no problem, it's just the ME account that does not work on any of my apple devices. I've checked the setting in the prefference from the Mail program, they all seam normal......ANY tips???
Thank you so much,
Simon

Most inconvenient... trying to run a business and I made the mistake of using my me.com acct. for business rather than the old Yahoo acct. I haven't been able to receive email all day either.
Seeing that it's affecting less than 1% of it's customers, really is annoying for some reason.

Proliant ML110 G5 Server Problem

Similar Messages

Maybe you are looking for