Proliant ML110 G7 Windows 2003 Server Drivers

Sto cercando i drivers per un ML110 G7 relativi a windows 2003 Server... qualcuno può aiutarmi ?
I'm looking for windows 2003 drivers for an HP ML 110 G7. Someone can help me ?

You can just run the "autorun.cmd" program in the HP SmartStart CD which comes with the machine , then go to "software" -> " Create Driver diskettes" -> " Create windows 2003 driver diskette" . Don't know what kinds of drivers are included. You'll need a floppy drive or you can use dos command " subst " to simulate a fake A: drive, because the it needs to write to A: drive . 
Myself, still struggling to move a Raid 1 ( 2x160GB hard drive ) from another server to the ML110 G7. Because the OS(Windows Server 2003) is on this Raid 1, don't know how to apply the new Raid driver to the OS so that it can boot up with Raid 1 enable.  The OS can boot up with SATA legacy support ( not Raid ), but when I enable Raid, the OS never boots up. Try to install the raid driver when OS boots up with SATA legacy support,  then change to Raid, but still fail.  Any idea ?   ( I think a fresh installation should not has this problem because you can apply the raid driver when you install OS )

Similar Messages

  • RAID drivers that support Windows 2003 server for Qosmio G30-153

    Hi,
    Where can i find RAID drivers that support Windows 2003 server for Qosmio G-series(G30-153 )
    Thanks in Advance.
    Abdul Hameed

    Hi
    Windows Server 2003 should support the XP drivers.
    So try to search for the RAID XP drivers!
    regards :)

  • How to Install 64-bit "Generic / Text Only" print driver on a 32-bit Windows 2003 Server?

    Hi All,
    In a nutshell, I need to Install the 64-bit Generic / Text Only print driver on a 32-bit Windows 2003 Server’s “Generic / Text Only 32-bit print queue.
    The problem is that there is no Driver-Disk to get the drivers. I’ve been able to isolate 14 files related to the 64 bit drivers from a Windows 7 x64 computer and copy them to a temp folder on the Windows 2003 x32 server. When I try to add the 64 bit driver
    to the Windows 2003 x32 server,  it wants a *.inf file, which I don’t have and can’t find.
    Because Microsoft will no longer support Windows XP, my client is replacing all of their Point-of-Sale Windows XP x32 systems with Windows 7 x64. They use Terminal Services (Remote Desktop) to connect to a Windows 2003 x32 server to use the POS system. The
    POS software redirects LPT1 back to the local Generic / Text Only printer. This works great for XP x32.
    When we use the Terminal Services POS software on the new Windows 7 x64 system, none of the labels print out because it’s redirected in 32-bit back to the local Windows 7 x64 Generic / Text Only 64-bit printer.
    This will be a huge issue for me if I can’t get this to work.
    Thanks in advance for any suggestions and help! -Rob

    those may be helpful...
    http://social.technet.microsoft.com/Forums/en-US/a129f49a-0216-41f0-b190-3efb46fbb8ac/generic-text-only-driver-on-windows-2008-server-r2?forum=winserverprint
    http://blogs.technet.com/b/yongrhee/archive/2009/09/14/how-to-add-64-bit-print-drivers-on-32-bit-windows-server-2003-or-windows-server-2008-print-server.aspx
    Best,
    Howtodo

  • Oracle 8i in Windows 2003 Server

    Hello,
    I know I might be asking an OLD and stupid question. But a Customer of mine is still using Oracle 8i and wants to install it in the SERVER that I supplied recently.. Tried all possibilities to install but the installation doesn't complete in WINDOWS 2003 Server. Tried installing after SP2 update, but still shows ORA-04031 Error..
    The server is IBM X3100M4 Server | XEON 4C E3 1220V2 Processor | 4GB Memory | 2x500GB HDD..
    All the hardware drivers are installed and working perfectly fine.. However while trying to install Oracle 8i it shows ORA-04031 error something related to Shared Memory. Can provide further details of error, if required.
    If somebody encountered similar problems, Please help me out here.. !!
    Thanks in Advance.
    Hari.

    bhatt t wrote:
    Hi Hari,
    I also installed Oracle 8i Enterprise Edition in Windows Server 2003 on a IBM Server(which is lower model than you with 2GB RAM etc.) successfully and also installed it successfully on Windows Server 2000 on a much lower model of IBM server.
    I worked with it for a long time without any problem.
    So, don't be confuse. There may be other type of software/hardware problem with you, but sure this is not a compatibility problem i.e. Oracle 8i is good with Server 2000/2003.Until such time as it isn't. And running that combination will just about guarantee no support from Oracle when something goes wrong.
    It's like IBM told us when COBOL-85 came out. We can continue to use the older compiler and everything will work exactly the same, until such time as it doesn't.
    >
    Regards.
    Bhatt.

  • Printing through Windows 2003 server

    I'm the only Mac in the house and have been printing through our Windows 2003 server just fine until this week after my last Apple Update. When printing to any printer on our system, (I have reset printers with no change to results), I get a heading with my name, plus (RE: my job), and a bold underscore with the following message below the line:
    %%[Error: undefined; OffendingCommand: languagelevel]%%
    %%[Flushing: rest of job (to end-of-file) will be ingnored]%%
    This has only become a problem in the last week. I first noticed the problem on my G5, but I just plugged my Powerbook G4 into our Ethernet system with the same results.
    Power Mac7,3 (G5) Mac OS X (10.4.7) Windows Server 2003

    I am not aware of what drivers were used before or if there has been a change. I used the standard print utility and it identified all printers on the system and I just added them. Printing was no problem until this last week.

  • Bootcamp with Windows 2003 Server SP2

    First of all I've got a bootcamp installation of Windows 2003 Server SP2 on my Mac Mini 2Ghz Core Duo, but until now I can't get the following:
    - installation of Bootcamp software in Windows
    - drivers for video and bluetooth
    If some one can give me help on getting the correct software/drivers for this.
    Already thanks.
    Robbert

    go to services window and set all your Oracle services to automatic instead of manual. this will start your database automatically rather you start it manually
    Anil Malkai

  • Installing Windows 2003 Server

    I'm attempting to install Windows 2003 server using the 875P Neo.  The system boots from the CD and loads all of the Windows driver, however, when I get to the part where I have to format the HD, the system states that it's unable to format.
    Do I have to pre-load any MSI driver during the boot installation?  Like drivers to support the 875 chip set?
    Thanks,
    David

    Once Windows loads, I get the following msg: "Setup cannot format the partition.  Your computer may not have enough memory to perform this operation, or your Windows CD-ROM may contain some corrupted files."
    I've tried this with several disks.  It will work with my Windows XP disks.
    Has anyone seen this problem?  Is this a BIOS configuration issue?
    Regards,
    David

  • Space Problem in G: - after NW2004s SR1 installation on Windows 2003 server

    HI Friends,
    I have installed NW2004s SR1 on Windows 2003 server with Oracle 10g database successfully. My server has sufficient harddisk space as follows.
    C: 9.6GB
    G: 24GB
    H:64GB & I: 73GB.
    RAM is 6GB
    While installing NW2004s i have defined a paging size on C: 400MB-1600MB and
    i have set the option as System Manageble on other drives G, H& I drives. I did not get any Swap space problem while installing.
    During installation I have chosen G: drive to store MirrorlogA, MirrorlogB, Oraarch, OriglogA, OriglogB folders of Oracle for redolog archives,.Total size of all these folders is 17.4 GB
    G: drive has one more folder Program files which is of 155KB  and no other files exist in it.
    But My system says that I am running out of Space on G: drive and free space available now is only 44MB.
    My question is where has the rest 5GB of space gone? Is it consumed as a part of Paging file which i have set on this drive as System manageble??
    I have set the same option on other drives too i..e H & I. But i am not facing any space issues for these drives.
    What could be going wrong?? Please suggest me how to correct this
    Thanks
    mv_d

    898118 wrote:
    Hi All,
    I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
    I double-insured that there is enough disk-space and I am also in the Administrators-Group.
    Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
    Regards
    Muhammad ShoaibOracle really doesn't like to be installed into directories with spaces in their names.

  • Netweaver 2004S installation on Windows 2003 server : Oracle 10g Problem

    Hi Friends,
    I am installing the SAP Netweaver 2004s on a server which has Windows 2003 server Operating system  on it.
    It has got 6GB RAM  and  has, 5gb of free space in C drive, H: drive has 70 gb and I: drive has 50 GB of free space in it.
    I am running  Pre_requiste checker tool to check my hardware & software requirements in order to go ahead with installation, as a part of SAPInst.exe execution.
    The results of Prerequisite checker tool are satisfied  except for one  " SWAP SPACE VALUES"
    I am getting the message as follows
    "The Minimum SWAP SPACE values required is 10994MB and currently you have 5993MB"
    How to increase this SWAP space value? Please let me know the procedure.
    Currently my server has a paging file details as below : Min size : 2MB & Max size : 9214MB allocated on C: drive. No other drive has paging file allocation.
    What effect will I have if i proceed without meeting this requirement??
    Suitable answers will be rewarded.
    Thanks
    Diwakar

    OPen windows explorer and right click my computer
    Select Properties
    Click Advanced Tab
    Click Settings (performance)
    Select Advanced Tab
    In virtual memory - click change.
    Increase swap space/page file here.

  • Problem Oracle 10g database Installation on Windows 2003 Server

    Hi All,
    I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
    I double-insured that there is enough disk-space and I am also in the Administrators-Group.
    Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
    Regards
    Muhammad Shoaib

    898118 wrote:
    Hi All,
    I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
    I double-insured that there is enough disk-space and I am also in the Administrators-Group.
    Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
    Regards
    Muhammad ShoaibOracle really doesn't like to be installed into directories with spaces in their names.

  • Installing problem on Windows 2003 Server 64 bit

    Dear All,
    I'am trying to install XE onto a Windows 2003 Server 64 bit.. The installation process ends without any errors but the database itself seems not to start.
    I tried several hints that have been mentioned here within the forum. But none of them worked. While experimenting I saw that there is not a single registry entry of Oracle within HKEY_LOCAL_MASCHINE\Software .
    Is there a possiblity to set those needed registry entries manually? Is there a script for that purpose?
    Thank you very much for your help!
    Regards
    Matthias

    Hi,
    thank you for your reply. As 32bit programs should run under Windows 64bit I thought the XE should run under 64bit, too.
    The installation of XE itself seems to finish without any errors. But within the log files it can be read that the database has not started up due to a out of memory problem. This causes many log entries within all other logfiles as no database could be created.
    The out of memory problem might be the same as within Advice on running XE on a small virtual Linux host ("Virtuozzo") because I am using a virtual windows 2003 server with "Virtuozzo", too.
    At this time I am on discussing the issue with the provider. Maybe I will get a dedicated server with Windows Server 2003 64bit. Hopefully the XE could be installed on the 64bit Windows Server because 32bit dedicated servers are rare.
    Best regards
    Matthias

  • I have a Windows 2003 Server 64-Bit, and when I upgraded to Firefox 4.0.1 now it won't run, it keeps saying to restart to complete the installation, but I've restarted theserver 4 times, and I still can't use it.

    I have a Windows 2003 Server 64-Bit, and when I upgraded to Firefox 4.0.1 now it won't run, it keeps saying to restart the computer to complete the installation, but I've restarted theserver 4 times, and I still can't use it.

    I ended up putting it in DFU mode.  It's kinda hard to tell it was in DFU mode because nothing showed on the screen, it was just black, but the sounds from the computer helped to tell me it was connected.
    Itunes still didn't recognize the device for whatever reason.
    So I used redsn0w.  I don't know if I can say that on these forums, but considering itunes was worthless at this point I am going to give credit where credit is due.
    Now I am giving itunes a second chance to upgrade to 5.1, if it doesn't work, well, back to redsnow and maybe I will even jailbreak it this time rather than just using the fecovery fix found under extras.

  • Crystal Ras 9 on Windows 2003 Server, IIS6.0, single threaded?

    We have just migrated from Windows 2000 server to Windows 2003 Server over the weekend. We ran into an issue with Crystal Ras 9.0 where the server serving up reports slower that our previous box. We are using IIS 6.0 and .net 2.0 framework with 1.1 installed for backward compat on our some of our old legacy codes. From what our developers can tell, the issue seems to be Crystal Ras queuing up the request and process them one at a time. That didn't happen before the migration. In fact, we also saw it working in our test environment before the migration. Once the pool is filled no further reports are generated which causes all report to stop which also starts to hang our server. They symptoms is worst under heavy user load. We tested with 6 simultaneous users and all 6 are done at the same time no matter the size of the report. Even the one that fail with an error message came up at the exact same time.
    Are there anyway we can adjust the IIS pools and or Crystal Ras to support additional threads?  We are connecting to Windows 2008 SQL Server EE. Any suggestions and or help is appreciated. I cannot find any references that would help us diagnose this further.
    Also, if you can also detail the cost to buying a phone case, that would be helpful as well.
    Thanks
    -atiwat

    Since you are not changing the version of RAS, I am not sure why the queuing would be different on different Operating Systems? You may want to check on how the queuing is setup on the WIN 200 server and duplicate that on the WIN 2003 server. Also, RAS has a limited number of licenses out of the box. Ensure that you are using the same license on both environments.
    Re. phone support. You can obtain a phone case here:
    http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
    However, please note that support of version 9 products terminated years ago, so you will not be able to get support for your version. To get phone support, you will have to upgrade to a supported version of RAS (XI r2 at minimum).
    Ludek
    BTW.; Windows 2008 SQL Server EE came way after RAS / CR 9 and has thus not been tested in this environment...

  • Crystal report problem on window 2003 server

    Hi
    We had developed a web based application using .Net 2.0 (C#) , Crystal reports (bundled version within VS2005) on Window XP, SQL Server 2005, we are able to see all the reports on this development enviroment, but when the application is deployed on Windows 2003 server , IIS 6.0 and SQL server 2005 , we are not able to view the reports we are thrown with an error as
    Failed to open a rowset. Details: ADO Error Code: 0x Source: Microsoft OLE DB Provider for SQL Server Description: Procedure or Function 'sp_xxxx' expects parameter '@ppppp', which was not supplied. SQL State: 42000 Native Error: Failed to open a rowset. Error in File
    Could you please explain what the problem is ? as we are stuck with this problem for the migration of application to the user community.
    Regards
    varma

    We have same problem
    does anyone have the answer?

  • Using Time Machine to back up to a Windows 2003 Server

    I am trying to set up my Time Machine to back up to a windows 2003 server share. I have found some hacks on how to do so, however i am not successful.
    What I have done so far:
    TMShowUnsupportedNetworkVolumes 1 in terminal, which got TM to see my shared drives, however, when i try to backup to my specific drive it gives me an error of not being able to write disk image. So i did:
    hdiutil create -size 100g -fs HFS+J -volname “TimeMachine Hcomp” Hcomp_000045128a91.sparsebundle
    using the appropriate mac address, volume name, and OSX computer name. However, when i run that in terminal, it comes back with a message saying it can only create one volume at a time.
    I'm not quite sure where to go from here, I feel so close, but im stuck.
    Also, on another side note, If I get this working, I would like to find a way where when TM is backing up data, it does not pop up the work bar window, I would prefer if it just worked in the background, and show it's status in the menu. I dont know if this is possible, But any suggestions would be of help
    Thanks in advance!

    AFreeman wrote:
    Thanks for the response,
    I understand the requirements for TM to work, and In the steps i've been trying, you'll see that the command 'hdiutil create -size 100g -fs HFS+J -volname “TimeMachine Hcomp” Hcomp_000045128a91.sparsebundle ' creates and HFS drive partition on my server share.
    I guess i'm not looking for an answer as to why when i enter this command, I get a response of only one volume can be created at a time. Am I missing something in this command?
    Thanks!
    Since you are using a hack, and therefore in an unsupported area, I suppose anything possible.
    You might browse around the TimeCapsule forum which more closely represents what you are doing than this forum
    The TC forum is here:
    http://discussions.apple.com/forum.jspa?forumID=1253
    It's possible that it may be a limitation of the system, hack or no hack.

Maybe you are looking for