Promise Drivers for 64Bit?

Where Can I find the drivers for my Promise controller for Windows XP 64bit? Ive tried searching on this fourm and PlanetAMD. No LUck

Hi Jocko
OK, I'll try explain (and remember!)
First I installed XP32 on the lone SATA drive. No problem as it was the only drive.
Then I added an old PATA drive, which BIOS and Windows Setup always sees as Disk 0 and the SATA as Disk 1.
I then installed XP32 onto the PATA drive. No problem, I think it was because Windows saw it as Disk 0 as it put the MBR in the right place.
I then put Server64 and XP64 on the PATA drive to test them (leaving by day-to-day install safe on the SATA drive. Again, no problems, it updated the MBR correctly to let me multiboot between the 3 OSes on the PATA drive.
I then tried to add an install of XP64 to the SATA drive, but because I left the PATA drive connected, Windows setup updated the MBR of the PATA drive instead. On subsequent reboot it failed because it was pointing to the wrong drive (I think). So I had half an install on the SATA drive, and a boot.ini on the PATA which pointed to a non-existent half installation. Even with BIOS listing the SATA drive as the boot device, each time the PC restarted it tried to carry on the installation and of course failed.
That's when I had to refer to my book on Recovery Console...
So it seems that if multiple drives are installed, it will update the MBR on the lowest ID drive, which is not necessarily the drive the installation is actually going on to! I think!

Similar Messages

Drivers for 64bit Vista

I have a Windows 64 bit OS and would like to know if anyone know of any future plans for Apple to provide drivers for 64bit ver so that my iphone will work on my system.

make the request as stated above, the drivers are not that tough to create, and with the exception of itunes being a pain to get working without a 32 bit executable, the driver is the easy part. I suspect if there ever becomes a fully stable 64 bit itunes version the driver is right behind it

HP LaserJet P2035n Drivers for 64bit XP

So I tried to use the HP email and live chat support but neither worked because they said my p/n or s/n were invalid and I am pulling them off the printer itself. The issue I am having is with a HP LaserJet P2035N. It is hooked to the network and the driver for xp work the PLC5 ones. I have one computer that is running XP 64 bit and when I go to download the drivers for it there are no network driver for the printer only local drivers. I called the 1800 number and they gave me a website to go to that just redirected back to where I was. Any advice?

The model number HP LaserJet P2035N.
Method 1:
You may refer to the below links and use the troubleshooters. Check if it lists and helps resolve any issues: Open the Printer troubleshooter:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3662026&...
Method 2:
You may check if you have the latest drivers installed for the device. You may refer to the below link for getting the latest drivers and check.
Hp LaserJet P2035n Driver
Good Works..

Need drivers for 64bit Windows 7

Hi I have a 845PE Max2 board and for some reason I can't find the drivers for 64 bit Windows 7. Is it not compatible with it? Any advice? Thanks in advance.

BarKode,
(If you ever come back) have a read of this sticky topic: https://forum-en.msi.com/index.php?topic=129409.0

64 Bit Windows7/8/8.1 USB drivers for Palm Desktop

Thanks to the great folks over at Aceeca.com (makers of NEW PalmOS Garnet devices), USB drivers for 64bit Vista, Windows 7, and Win 8 operating systems are available. There are many users reporting Palm Desktop 4.x is also working.
I have synced my TX to my Vista64 bit laptop, and Windows 8.1 HP Spectre X2 hybrid successfully via my USB cable.
The drivers are located here:
Aceeca Driver Downloads
Installation instructions (from Aceeca) for Windows 7 are included in the download.
Basic instructions:
1. Download the drivers and Extract them to the same folder. Remember the folder you extracted them to.
2. Try to HotSync your device. It will fail.
3. Open the Device Manager, and look for the Yellow Triangle next to either "Acceca" or "Palm Device" under "Other devices".
4. Right-click on the device, and choose "Update Driver Software".
5. Choose "Browse My Computer for Software" and direct it to the folder you extracted the Aceeca drivers to.
6. Choose "Next" at the driver file location window, and then tell it to "Always trust software from Aceeca Ltd." then click the "Install" button.
7. I received an error message (Vista64) that told me "The drivers were installed but the device couldn't be opened." I saw that my TX had timed out and went to sleep. I tried a HotSync and it worked!!!
Good luck!
NOTE: Palm Desktop 6.22 may only show Media and Install. Here's how to fix that:
If Palm Desktop 6.2.2 only shows Media and Install, try this: Right-click on the shortcut for Palm Desktop, then choose "Run as Administrator". The ther modules should appear.
To make Palm Desktop Run as Administrator every time in Windows 8/8.1:
Close Palm Desktop, if open. (This is a very important thing to always do when using 6.2.2 - it has been known to lose data when a computer is shut down without closing the program!)
Right Click on the Palm Desktop Icon in the Metro screen, then choose "Open File Location". You will now see the actual file for the shortcut.
Right-click on the "Palm Desktop" shortcut file, then Properties. Now pick the Compatibility Tab at the top.
At the bottom of the Compatibility Tab is a checkbox: "Run this Program as Administrator", Click OK .
Try opening Palm Desktop, all the parts should appear. You may see a box open when you close the program asking "Did the program run correctly?" I picked "Yes", and it's been working fine since then!
If you are using a much older PalmOS device and want to try using Palm Desktop 4.x, you will need this additional patch from Pimlico Software:
Palm HotSync Setup
WyreNut
Forum member bobboffin has added this post:
"After attempting your first HotSync and failing (as expected) you may be unable to find any trace of the device in Device Manager, making the next step quite difficult. This happened to me, and after some investigation I discovered the following tip that allows Device Manager to show hidden and non-present devices.
Open up Notepad and paste the following two lines into it:
set DEVMGR_SHOW_NONPRESENT_DEVICES=1
start devmgmt.msc
Save it as SetDev.bat into My Documents.
Open My Documents in Windows Explorer and double click on SetDev.bat. Device Manager should open.
In the View menu select Show Hidden Devices.
You may now see under the Other heading the failed device with a yellow triangle against it.
You can now proceed to install the drivers per the instructions.
Note that the driver supports most Palm OS versions. I'm actually using an Aceeca Meazura 1000 ruggedized PDA running OS 4.1 --- bobboffin"
Hope this helps!
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!
This question was solved.
View Solution.

Thank you so much. I was thoroughly disappointed to see that the support telephone for paid support had been discontinued. I thought I would need to replace my (ancient but serviceable) Z22.
I followed the instructions listed here and am very happy to report that I completed a sync!
Thanks again.

Help with Drivers for HP dv8315nr for Windows Vista 64bit

Hi everyone! In 2007 i bought a laptop a HP Pavilion dv8315nr with the hope that the stickers in his keyboard saying "Vista Compatible" was true and the promise of that the AMD Turion processor can handle a 64bit OS. Today i realize that was not entirely true, because i got the Windows Vista ultimate for 64bits and the processor can handle this OS but i see that in the HP site don't provide any support for the drivers, so i get the problem that i don't have audio in my laptop and the modem adapter doesn't work either.
My question is can anybody help me with the audio driver for the HPdv8315nr for windows vista 64bit, that's my priority.
I appreciate the attention for this manner. Thank you
Jorge

I have the same problem with my Photosmart 7350's--I have two. I cannot get either to work with the New Mac Pro driver--Gutenprint .... I got the new drivers from Apple for HP but they fixed nothing. I even downloaded the newer drivers from HP, but their Printer Assistant does not seem to be working. I downloaded it twice. I can get a test page to print a few lines but the rest of the page is blank. When I try to print with either Pages or Word I get either nothing or trash.
My computer is the New Mac Pro 2.8 8-core with OS X 10.5.4.
These printers work with my Windows machine and I have read where they work with the Mac OS X. Can someone help. The link for printing trouble shooting did not help. My guess is the driver but I cannot get one do show up even after the HP download.
thank dr_lynch

Hp 15 -f039wm drivers for windows 7 64bits

I downgraded my pc from windows 8.1 to windows 7 64bits. I and having problems getting drivers for my PC. Can anyone help me with a link where I can locate drivers. Thnx.

Hi spyrozack
Install the wifi driver, then use the links in the links of the following messages:
Realtek RTL8188EE Wifi
http://ftp.hp.com/pub/softpaq/sp66001-66500/sp66190.exe
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/HP-15-f039wm-Windows-7-Driver-P...
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/HP-15-f039wm-Windows-7-ETHERNET...

Where are the drivers for HP LaserJet 5P for Windows 8.1 (64bit)?

Had been using HP LaserJet 5p printer with HP LaserJet 5p printer driver, but had printer disconnect for a few months due to not have black toner. Now I want to use the printer and my control panel does not show HP Laser 5p printer for my tablet but shows it for my laptop. I can not find the driver on the HP support list and the support list does not recognize HP LaserJet 5p.
Where are the drivers for HP LaserJet 5p for windows 8.1 (64bit)??????

Hi,
Basic print drivers are available for the HP Laerjet 5P via Windows Update.
Follow these steps to install the printer drivers on Windows 8.1:
http://h20564.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c03470332#N100AA
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

I Need USB Controller Drivers For My HP Pavillion g6 2235ca Notebook Running Windows 7 Pro 64bit?

So it has been at least a couple of months that I've been using my laptop with only ONE working USB port.
The other two do NOT work. If I go to Computer on the Start menu, and right-click on Computer, then Manage, then i go to Device Manager, there is a yellow exclamation mark next to Universal Serial Bus (USB) Controller.
When I try to update them, Windows 7 tells me that an update could not be found blah blah blah...
This problem happened ever since I installed Windows 7 64bit over Windows 8 64bit.
So, can someone help me find drivers for this USB Controller? Or is this some kind of hardware failure or issue?
Please help? Anyone...!
Thank you!
This question was solved.
View Solution.

Hi,
Try installing the USB 3.0 driver on the following link.
http://ftp.hp.com/pub/softpaq/sp55501-56000/sp55975.exe
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Laserjet 4200 drivers for Windows 7 64bit

ok...ive upgraded to Windows 7 64bit to test on our network and come to find HP is lacking on the drivers for my laserjet!!!
I need a solution for this.
thank you

In Windows 7 Prof 64 bit I got my HP 4200DTN to work kind of. In Windows install a network printer, have it look for the driver in Windows 7 prof 64 bit. Now with that said it will make it print, duplex BUT if you have an envelope feeder like I do you are SOL, THANKS TO HP. Their solutions is to buy one of their cheap Chinese printers. I will not do that because the HP 4200DTN will print and does a good job in my network. Before I buy one of their cheap Chinese piece of crap I will get rid of Windows. Still trying to find a work around. The HP printer driver web page has a Universal Printer Driver for the HP 4200 but a lot of features are not supported. Tray 1 envelope feeder ( no support ) you can take the feeder off and feed tray 1 by hand to print envelopes HANDY!!! Just like starting your car with a crank!!! Would not hurt HP to provide drivers for the HP4200DTN, with the envelope feeder. They are so busy trying to SELL, SELL, SELL the new Chinese cheap crap. HP had a problem with their DeskJets in the 90's, paper feed rollers and gears broke. They talked me into a HP 8600Pro Premium, going to send it back. I am going to try my hand at fixing my HP OfficeJet 7310 All-In-One that quit working. It has been a good printer since purchase 6 years ago. I puchased a parts machine today. With any kind of luck I will have the needed parts to make my HP 7310 live. Don't need their cheap Chinese Junk. They don't want to have the service they used to provide. Spend all day on the phone and get transfered all over the world and back again, no help. Sick of it!

Tecra A11-11H - Drivers for Windows XP 64bit

Hi,
does anyone know where can I find the driver for the wireless card of Tecra A11-11H using Windows XP 64bit, does anyone have a full list of the hardware models Tecra A11-11H using as toshiba support website doesnt have driver for Windows XP 64bit.
Many thanks

Hi buddy,
Windows XP 64bit is not supported by Toshiba so there are no drivers for this OS. The 64bit version of XP was not very popular so probably you will not find all drivers on external pages. If you want XP I would recommend the 32bit version or Windows 7 Professional that has a virtualization mode for XP.
Tecra A11-11H has Intel WLAN card so check the Intel page directly. Maybe you can find a driver: [www.intel.com]
Furthermore if you install a hardware diagnostic tool like Everest or PC Wizard 2011 you can check the installed hardware and so you can search for drivers yourself.
But as I already wrote: Choose another OS ;)

Inspire 7800 MF7025 drivers for win 7 64bit

I bought a new dell xps8300 with windows 7 64bit home. I need the drivers for my speaker system which is the Inspire 7800 MF7025. Thank you for any help finding them

Hi,
This speaker system doesn't run on drivers, all you need to do is to plug it in and it should play. Please ensure that your onboard sound/sound card is producing sound.

Can I install camera raw drivers for a Canon 1D X in Photoshop CS4 Windows7 64bit

Can I install camera raw drivers for a Canon 1D X in a Photoshop CS4 Windows 7 64bit system

you need cr 6.7 or better.
ps cs4 can only update to 5.7
you can either use the dng converter,
Win
Mac
or upgrade your ps, Lightroom and Photoshop | Adobe Creative Cloud Photography Plan

Iam looking for the Sony DAVDZ650 Bluetooth drivers for a Windows 7 64Bit

I have bought a Sony Music System model DAVDZ650 but i am unable to play music from my Notebook Dell E6430 running Windows 7 64Bit. Windows could not able to get the Bluetooth drivers for this System. Kindlt do the needful on where i can download the drivers.

Hi johnruge,
Welcome to the Sony Community!
Please check the Bluetooth profile of your Notebook. Here are the supported versions and profiles.
Supported Bluetooth version:
Bluetooth Standard version 2.1 + EDR (Enhanced Data Rate)
Supported Bluetooth profiles: A2DP (Advanced Audio Distribution Profile) AVRCP (Audio Video Remote Control Profile).
NOTE: The Bluetooth devices to be connected must support A2DP (Advanced Audio Distribution Profile).
If the issue goes unresolved, we kindly recommend visiting our Sony Global Web site for information on contacting the Sony Support Center in your region at http://www.sony.net/SonyInfo/Support/.
If my post answers your question, please mark it as "Accept as Solution"

Windows XP 64bit extended systems edition SATA Drivers for MSI-9130 K8T Master2-FAR

I'm looking for Windows XP 64bit extended systems edition SATA Drivers for MSI-9130 K8T Master2-FAR. Does anyone know where I can download it? Thanks
Processor: AMD Athlon 64 FX 51 2.2Ghz 1ML2
Motherboard/Chipset: MSI-9130 K8T Master2-FAR (VIA K8T800) dual channel DDR400
Memory: 1GB total (2x512) actually needs to specifically be Corsair CMX512RE-3200LL XMS3200R 1.1 400Mhz 2326 512MB DDR400 Register ECC
Disk: 160GB Serial ATA Seagate ST3160023AS
Video: Radeon 9800 Pro 8X AGP graphics with 128MB DDR memory

>>Posting Guide<<

Promise Drivers for 64Bit?

Similar Messages

Maybe you are looking for