Promoted column in report

Hi,
Can we filter the data by using dashboard prompt in Dashboards Without a having Promoted column in report( Means Col as set as promted and not used in report).Please let me know.

Hi,
Yes, we do not need to always the dashboard prompt column in the report but still filter on it. Please follow steps below
1. Create the report with the columns of choice.
2. In the filters section, click on 'Add Filter (With Funnel and star') icon and choose the dashboard prompt column and set the filter as is-prompted.
Hope this helps.
Thank you,
Dhar

Similar Messages

Can we add a new column in report which is not in table.

Hi All,
Can we create a new column in report which is not in table.
I have two columns in my table completion_date, manufacture_date. If the difference between the completion_date and manufacture_date is 0, -1, 1 then the new column of the report will say on time against each record or else will display late. Any suggestion how to proceed on this
Regards
Edited by: User_Apex on May 16, 2011 5:54 AM

Standard report then, NOT an interactive report (which if you were using, you could build a computation and report on that)..
Then the adding a column in the query would be your best best...
Thank you,
Tony Miller
Webster, TX
There are two kinds of pedestrians -- the quick and the dead.
If this question is answered, please mark the thread as closed and assign points where earned..

How to use the procedure column in reports

Hi all
How to call the procedure in reports as source.. If possible how to use columns of procedure in the layout column of report????

Hi,
Your query is not clear.
1. In subject are you asking total column.
A. Edit pivot view and go to Rows and click Total BY option here you can find option like (none,before,after) the you can select after it will display total all culms.
2. I want use the columnC in columnD ? -- Am not understand.
A. What my understand is you want to see the report only C and D values only.
If it is correct we can apply filter in report level click column filed and apply not equal to A then it will show only C and D only.
If it is wrong pleas post me correct one with example. Will try to help out this.
I am not sure this is what your looking so far.
Award points it is useful.
Thanks,
Satya

How to set value of a column in report region

Hi,
I have a report region based on a query.In this my first column is selectlist "select row" having to values "yes" & "No".
I have two buttons on top of the region "Check all" and "uncheck all".
My requirement is when I click check all button all rows corresponding to "select row" column gets selected to Yes and when I click No all rows gets selected to "No".
Thanks
Vikram

Actully I want to set the value of a column in report region.
There are replies in the forum but in those the item is in form but not in the report region.
I am generating report region by using htmldb_item.selectlist and i dont know how to set value in these type of items.

How to include variable in the text column in report painter?

Dear Expert,
Would like to seek for your help to include How to include variable in the text column in report painter?Please advice.
Thank you.
Regards,
Karen
Edited by: Karen Swee Ping Ho on Jun 17, 2011 2:48 AM

Hi,
Thank you for the promt reply.
1) How I include the variable in the column header to display fiscal year which I have selected from the selection screen?
which variable should i use?
2) Where can i find more information about the characteristic and which variable to be use base on the characteristic?
For example: I would like to display the fiscal year from the selection screen/input screen when execute the report which also will reflected to the element definition and will display the fiscal year also in the column text?
3) Kindly advise base on question 2, the variable that i use in element definition it will also display in selection screen?
4) When execute the report the first selection screen input parameter it obtain from where it is from element definition?
5) Please advice how to be done when report execute with first screen input selection will also reflect the element definition of column and rom with the selection of the fiscal year?
Please help.
many thanks
Edited by: KH on Jun 18, 2011 7:18 AM

How to add new column in report painter

Hi Experts,
I want to add new column in report painter which as to calculate the previous column . value in the new column should be the precentage of previous column existing on left side...

HI Pradeep,
Goto the transaction code (Change Report) GR32.
Give you library name and report name
And click on the column (application tool bar or F7) button then place the curser on the screen where you want column (please note you have to keep curser on the header section u2013Red column text) right click and insert element. Then you select formula as selection element and enter. You will get the enter formula box. Then you can type your formula and continue. This will add new column to the report.
How to enter formula: you can see the formula components in that id and description.
Id is columns that are present and description indicates explanation of that column.
Enter formula according your requirement.
Examples:
Enter formula screen:
ID : des
X001 amount
X002 pt000
X003 test
1. Enter formula as: ( X001 u2013 X002)
The above formula is for fist column u2013 second column.
2. ( ( X001 u2013 X002) / X003) * 100
First column u2013 second column and devide by third column after that multiple with 100.
Hope this will help you
Regards
Manohar

Additional Lead Column in Report painter

Hi Gurus
Please guide me how to add an additional Lead column in Report painter
Thanks
Hiren

Hi HIren,
There can be only one lead column in report painter.
However within the one lead column you can identify more than one characteristic - e.g. cost center and cost element. You can then identify that both characteristics should be exploded.
If you go Edit > Rows > Explode, you have the opportunity of identifying which characteristic takes presidence over the other, and how they expand. So in this example, Cost center will be 1 and cost element will be 2.
The output will be dependant upon your report layout, but you should have the layout so that you have:
Cost Center A:
- Cost Element A
- Cost Element B:
- Cost Element C:
Cost Center B:
- Cost Element A:
- Cost Element B:
- Cost Element C:
And to distinguish the cost centers from the cost elements, you can format the cost center row "Color for Totals"
Regards,
Gaurav

I want to hide a column in report 6i

hi
I want to hide a column in report 6i,
I used this code
function F_col_qty3FormatTrigger return boolean is
begin
if :color3 is null then
return (false);
else
return (TRUE);
end if;
end;
plz note that COL_QTY3 and COLOR3 both are from different table
and resulting gave this error
REP-1314 Format trigger 'F_col_qty3' reference column 'color3' at wrong frequency.

You can format fields from a lower level group using fields from an upper level field, but not vice versa. This is because for the same upper level field there may exist several values of the lower level field. If this can not happen in your situation, there is no reason to place the fields in different groups.

How do I set individual properties for a column in report layout at runtime

How do I set individual properties for a column in report layout at runtime? I need to change this based on a user's input. This is for v10g.
I need to change either the "Read from File" attribute or the "File Format" attribute for one column based on the user's input. IS this possible?
Thanks in advance!

Hi,
define 2 columns and use format triggers to show the one or the other column.
Regards
Rainer

Infopath form promoted columns data is not populated to sharepoint library

hi ,
I have an Team site with Sub Site .
Example :Http://{hostname}/{teamsite}/{TestSubsite}
In Dev Environment
in the above TestSubsite , we have an form library "testformlib" .We have an infopath form named "informpath1" which is published to the testformlib library and promoted some of the columns to the library.
Now i can see the promitted columns data in the library.
Taken CMP which is TestSubsite.cmp for the TestSubsite
Production
Http://{Productionhostname}/{teamsite}/{TestSubsite}
I have imported the above Dev. TestSubsite.cmp to the production TestSubsite which has same library,
Also activated the same infopath form to the library "testformlib" in production sub site.
Problem
The Problem is I cannot see the columns which i have promoted in production subsite library.
What I am thinking is "testformlib" library guid is changed in prosecution while i am importing cmp.
Can i know what is the mistake or i need to change to do.
Is there any chance to change the existing share point form library guid using Power shell.
Please suggest.
Thanks
Raghava

Hi Victoria,
Please check the scenario, what i worked and issue.
Scenario:-
I have a site ,ex:- http://host/sitecollection/subsite1 in dev. machine, the subsite1 have a form library "TestFormLib".
published infopath form wtih some promotional fields (ex:- Test1) to "TestFormLib" library.
i am able to see all promoted 'Test1' field data in the library.
taken back up form the dev upto sitecollection and restored in the production.
created subsite1 in prodiction server and taken subsite1 cmp from dev , imported into production server and published form which have promoted columns to "TestFormLib" library.
able to see the promoted (Test1) field data in "TestFormLib" library in production subsite1.
re-activated info path form to "TestFormLib" library in dev machine with additional (Test2) field promotion.
i am able to see the "Test2" promotion field data(Value) in dev machine "TestFormLib" library.
then , taken cmp for "SubSite1" from the dev. machine, imported into production server on "SubSite1" .
re-activated the latest form which is promoted "Test2" field to production server.
i am able to see the promoted column name "Test2" , but not able to see the data(Value) of the "Test2" in production server "TestFormLib" Library.
Issue:-
i am able to see the promoted column name "Test2" , but not able to see the data(Value) of the "Test2" in production server "TestFormLib" Library when i did second time promoted in second time imported subsite cmp.
Any Suggestions to solve the above issue and i dont want to recreate the library in production . Because the data has been deleted.
Help please..
Thanks & Regards,
Raghava Reddy S.

How to display top 2 countries in 2 columns in Report Designer

Hello Gurus ,
I have a requirement where top 2 countries has to be displayed in two different columns in Report Designer.
is there are way to do that, i tried many differetn ways but was not successfull, apart from creating text variables and writing customer exit.
I appreciate your help
Thanks,
Kumar

Hi,
I am not sure what version you are, from version 9.3 I think there is a "Top" function, just highlight the row, tick the option for "Top", set the number and the column
Failing that if you need to use rank could you not hide the column.
Cheers
John
http://john-goodwin.blogspot.com/

Sorting based on two columns in report

Hi,
we have one issue on sorting based on two columns in report.
In the report we are doing sorting on two columns(week_id and stage_name). I have attached the screen shot for the same. The sorting is first done on the week_id and then on the stage_name. The issue comes when we have no data for the stage 1 - Prospect in W1. The stage goes to the second position.
Please suggest if there is any work around to show the 1 - Prospect stage in W1.
Regards,
Ambika Nanda.

what is w1? where is screenshot? and is stage seoncd sort? if so what is the issue?

Conditional display column in report

Hi,
If we have a single row report of 30 columns, and I want to display only the one with any values but null and hide the null ones, Is there a way to do it?
It's the same issue discussed in this thread conditional display column in report
thanks,
Fadi.

Samara - I suspect there are a few ways to do this, but none obvious or very easy as far as I can see.
You can create dynamic SQL (as Arie and others have suggested) to only include the columns that are not null.
You can build and output the HTML directly to the page, choosing only to include the values that are not null.
You can create a set of conditions that you can apply to the report columns. A very crude example might be 30 hidden page items like 'SHOW_COL1' etc. (not great, I know), or perhaps you could set a hidden page item to a value like '01:02:03:'etc., with the number only being included if the value is not null (so that col3 being null gives you '01:02::04'etc.), so that the condition for each column is 'Text in expr 1 in contained in Item in expr 2', where expr 1 is '01' for column 1 etc.
Sorry, that is a very contrived example, but it's just to illustrate that there's generally a way of doing pretty much anything in APEX. You might create your item containing the comparison expression by requerying the data in this kind of way:
SELECT NVL2(column1, '01', '') || ':' || NVL2(column2, '02', '') || ':' etc.
FROM table
WHERE condition
However, wanting to create a single-row report with nulls hidden makes we wonder what you're actually trying to achieve and whether there's a better way? Could you use a series of page items, for example?
John.

Opening stock column in report

Hi,
I have a reporting requirement report name is "Purchasing during the year" one of the column in report is Opening Stock so from where can get the opening stock in this column.

Hui,
kindly use the report MB5B
Regards
Damu

Spacer column in Report

Hi Experts,
Could pls help me to create spacer column(Empty Column) in Report.
Thanks&Regards,
Sankara Reddy.

Dear Nsreddy,
For include Spacer Column (Empty Column) in Report, you have a different way,
One of then work with cell in BEx Query Designer within two structures, one in rows and the other in column.
The other hand in create a WoorkBook and embed two queries.
I hope those suggestion can help you son highline to answer your question,
Luis

Promoted column in report

Similar Messages

Maybe you are looking for