Promoted Organizational field in SCM is not available in Production

Hello All,
We have promoted a field in SCM to org level field. The org field is available in DEV and QAS when I checked in table USORG  but the same org field is not available in production.
Please advice..
Thanks,
Masood

Perhaps you mean org field value?
How are you promoting the field? There is a good way and a bad way to do this.
It is also possible that the field is corrupted if someone made some direct changes in Production. I have seen this before in some roles.
Cheers,
Julius

Similar Messages

  • MM/ MB01 goods entries : the field WEMPF (recipient) is not available.

    The message has been transfered from the SD  to the MM forum :
    MM/ MB01 goods entries : the field WEMPF (recipient) is not available.
    Edited by: Vincent JAYET on Sep 23, 2011 3:59 PM

    Than again why you are posting here.  Continue all your queries in MM forum which is the right forum for your query.
    G. Lakshmipathi

  • SICF Service not available in Production

    Hi Experts,
    I have created a Webdynpro application and I have moved it to quality and Production systems respectivelly.
    In development and quality system it is working fine, but the same application in production gives a runtime error. It is showing SICF service is not available.
    I have checked in SICF Tcode, but the service for the particular Webdynpro application is not available.
    How can I resolve this issue.
    Thanks,
    Pradeep

    Dear
    you have to activate
    /default_host/sap/public/bc/ur
    /default_host/sap/public/bc/icons
    /default_host/sap/public/bc/icons_rtl
    /default_host/sap/public/bc/webicons
    /default_host/sap/public/bc/pictograms
    /default_host/sap/public/bc/webdynpro/* (ssr, mimes, etc.)
    /default_host/sap/public/myssocntl
    Active Services in SICF - Developing, Configuring, and Adapting Applications - SAP Library
    Regards

  • Importing parameters not available in Production system

    Hi Experts,
    I am facing an issue after moving my objects into Production system.
    I have created a calss and which contains five methods. Each method contains itsown importing parameter. There is one method to send mail, which contains three importing Parameters. I have captured this class and the methods in a TR and basis team moved this TR into production system.
    The TR has  moved successfully into the production system. But when I checked the Parameters of the class SEND_EMAIL has only one importing parameter insted of three.
    Again I created a new TR and captured all the objects related to Class, which contains class definition, methods etc.
    I have moved it to quality system successfuly. When I checked in quality i can see the three importing parametrs in SEND_EMAIL method.
    This TR has moved to Production successfully. When I checked in production I can see only one importing parameter in SEND_EMAIL method.
    But it is showing same active version in Quality and Production.
    Please suggest me how can I resolve this issue?
    Thanks
    Pradeep.

    Dear Pradeep
    First you check the parameter which u are sending that are already in prd server exist or not
    some there are some thing we can see which are available in qua those are not seen in production
    see in se06 and try to modify the exact component to modifaible state
    check sp pack of qua and prd are one and the same
    check kernal rel level in both
    check chmod  and chown are same in both
    Regards

  • Some fields in table is not available in target fields(B1) DTW

    Dear Experts/Gurus,
    I have a problem relates to data transfer workbench (DTW) SBO 2005A SP 01 PL 18. It is about unavailability of a certain field that is profitcode or distr.rule in JDT1 table. It is required field and there are many transactions and impossible to entry it one by one. If I check the table in SQL server 2005 database How to solve this problem, could I add target fields(B1) in DTW ? I appreciate your answer. TIA
    Rgds,

    Hi,
    When a field is available as a property in the corresponding DI API object you should be able to add a column to the import template with the property name (not the name of the DB field!!!):
    Here you would add "CostingCode" for the "ProfitCode"...
    Sorry for the confusion created by the differences in the names!
    + the nonsense in the helpfile (someone thought it might help to use a descriptive name for a particular table (OOCR), but wrongly assumed that OCR here would have sth to do with <i>Optical Character Recognition</i> - funny!)
    HTH,
    Frank

  • Payment Terms Field in FB02 is not available

    Hello experts. Can you help me find where I need to configure the setting to allow the user to display and change the Payment Terms field when displaying/changing a customer invoice via FB02? We are on ECC 6.0 and we are using New GL. This field is also not being displayed when we are using FB70 to enter a Customer Invoice.

    Hi Enrique,
    I think it is because of Field Status .So Check the Field Status Variant in SPRO.
    Path:Financial Accounting (New)->Accounts Receivable and Accounts Payable->Business Transactions->Outgoing Invoices/Credit Memos->Make and Check Document Settings->Define Field Status Variants
    Check for your Field Status Variant assigned for your company code then the Field Status Group.Hope you can see the Field Payment Term check whether it is Suppressed or not else make it Optional or Required according to your requirement.
    Hope this might help you
    Regards
    Andrew

  • Organize Button in InfoView is not available to the general users

    I've got Business Objects XI R2 installed and running without issue EXCEPT - the only users who have access to the Organize Button in InfoView are the BO Admins.  I've looked throughout and cannot find a way to give the general user access to this option.  Any assistance would be appreciated.
    thanks
    WDC

    Resolved

  • Field audisp MRP-relevant not modified in Production Order.

    I would like to know if there is a way (Exit, BADI, customizing, etc) to modify the field Field audisp MRP-relevant before or after add a new component or operation in a production order. The system always get the value form the customizing of the production order type and I would like to change this field to other value 1 to 3 for example.
    Thank you in advance.
    Regards.

    Hi Alberto
    Can you please provide more details of your business requirement? On which table would you like to change this field? Do you want to make an order  not relevant to MRP or a reservation?
    You can make any MRP element not revelant to MRP dynamically (don't neet to change anything on the table) using BAdI MD_CHANGE_MRP_DATA.
    See this blog for more details:
    Making an element not relevant to MRP or MD04 using BAdI MD_CHANGE_MRP_DATA
    BR
    Caetano

  • Package not available on Production

    Hi Gurus,
    i am in a big problem. i had a package which consisted all the Z-developments done in SAP DMS at the time of implementation but now when we are moving to ECC 6.0 upgradation, i do not able to find that package. Without the package on production system how could the programs running? The packages are available on Development server.
    Just i wanted to know that how could the packages be deleted from the production system? how to track that who has deleted the same?
    thanks and regards
    Shikha Gupta.

    Hi,
    I think that the Z-Package needs to be transported maybe separatly to your production system. Unforutnatly I'm not a  transport expert and so I cannot send you more detailed information on this issue.
    Best regards,
    Christoph

  • Module Pool TCode not available in production

    Hi Friends,
                  I have developed a module pool program and assigned a transport request number and transported to production.
    The transport request has been successfully moved to production server. But in production system, Iam unable to run the transaction code.
    In production, when i open the modulepool program , under " display object llist ",  it is not displaying the transaction code.
    What could be the problem.
    Is there any separate transport request number for custom transaction along with module pool program? if so, How to identify.
    Please suggest me.
    Thank you,
    Murali Krishna T.

    Hi Murali,
    Have you tried to execute the transaction from application toolbar.
    If it gives a message like...."Transaction does not exist" then you need to check the same on development server that whether you have transported the right one or not..You might have saved on any other request.
    If still facing same isue then let me know what exactly the message you are getting.
    Thanks & Regards,
    Preetesh

  • Valuation type not available in Production Order

    Hi experts,
    We are unable to settle production order ,because In CO03,under "Goods Receipt block",no valution type mentioned in "valuation type block".
    Please advise.
    Regards,
    Samar

    Hi
    Check the material master, whether split valuation is activated or not.
    rajeswari

  • New DSO data fields are not available for transformations in the upwardflow

    Hello,
    There are data flow from
        many source DSOs -> Target DSO -> Final DSO.
    Different transformations are defined and activated with DTPs. This works fine and provides the desired results.
    now new fields are added to the target DSO, final DSO and one of the source DSO.
    When I now try to edit the transformations, the new fields are not part of the sources at the different stage.
    The fields are available in the Data Source created out of a DSO but not directly when using a DSO as a data source.
    Have anyone faced such a problem?
    any solutions to this?
       - I cannot delete all the other transformations as this is too much work to do and there is no time for it.
    Regards
    Kannan

    We created ZMD_BS_MAT_OVP_LAYOUT. But the situation has not changed - the fields are not available for edit.

  • Appended field is not available in BI

    Hi Gurus,
    I have appended a field in the datasource, removed a hidden tick so that it will be available in BI system but after replication of datasource I still could  not get this field in transfer structure. When I was checking I found that in display datasource window under "Fields" tab for that particular field "Transfer" column is uncheck, due to which the field is not available.
    Now my concern is that how should I make this available in BI.
    any Help will be heavily appreciated.
    Thanks,
    Saurabh.

    Hi,
    I am on BI 3.5 system.
    and I didn't mean that my datasource is not in ROOSFIELD table, it is there but what you are saying is not applicable in my case. in ROOSFIELD, for the appended field  the OLPTSrc version is "A" and Field Attribute is "P" which is what the ABAP program stated above will do and I was very well aware of the program.
    My, ROOSFIELD output is,
    2LIS_XX_XXX                      A               ZZXXXX                      P
    This field was not hidden earlier as well, i could get this field for selection in RSA3 and even in infopackage also.
    But, the only concern is what I posted in my 1st question.
    How will I get that checkbox ticked?
    Thanks,
    Saurabh

  • How to add a new field in target ODS that is not available in source ODS ?

    Hello every one , this is the first time i am placing a question
    - Currently we have an existing ODS based on 2LIS_02_SCL data source. This ODS is already in production.
    We have a requirement to use this existing ODS as our source to load required data in to two different data targets which also are ODS.Their update rules are different.
    Problem: There is  now a requirement to include a new field (PO need date) in the two target ODS. As this field in not available in our source ODS . How do we go about adding this.
    concern: As the source ODS is already in Production, How do we go about loading data if this new field is added.
    Anticipating your co operation.

    The new field is 0SCL_DELDATE  (planned delivery date of document schedule line)
    It is already there in the comm structure of our source ODS. But as it was not needed earlier in the source ODS, it was not used/added.(i.e not there is the source ODS update rules)
    But now as we are basing our targets on this source ODS.
    How do i go about doing this.
    The main idea of doing it this way is because we do not want to reload data from R/3.

  • Custom Attribute not available in Available Fields section of Configuration

    Hi Experts,
    My requirement is to add a custom search field in contact search screen. For that i tried various options
    Option1
    Added a model attribute in component/view  BP_CONT SEARCH/Search. The attribute got successfully added. But when i opened the Configuration tab, i could not see the attribute in the available fields.
    Option 2
    In the view CRMVC_SDESIGN, i created a new entry for my attribute in object type: BP_CONTACT and design object . But doing so, i got an error and was not able to add my attribute
    Option3
    Since the View context node 'Search' is bound to the Component Controller Context node 'Search'. I created my custom attribute in compoennt controller also. But this also did not help.
    Option 4
    I deleted the enhancement of the view and created a new enhancement. I created a value node in Search context node. But still the attribute is not available in the Availble Fields in the Configuration of component/view BP_CONT_SEARCH/SEARCH.
    Kindly provide your valuable suggestions to resolve this issue.
    Regards,
    Radhika
    Edited by: Radhika Chuttani on Jan 6, 2012 7:28 AM

    Hi Radhika,
    You need to enhance the search query structure as well in order to get the field in the configuration.
    You can find the BOL structure for the corresponding context node bol model.
    In your case, the BOL model is the search object 'BuilContactAdvancedSearch'.
    The corresponding structure can be found at the BOL Model Browser, under Dynamic Query Objects
    for the search object 'BuilContactAdvancedSearch'. The corresponding structure 'CRMT_BUPA_IL_CONP_SEARCH'
    has to be enhanced with the new custom attribute. Only then, this field would be available in the configuration
    when the following htm code gets executed when you open the configuration tab.
    <thtmlb:advancedSearch id                = "advs0"
                                     fieldMetadata     = "<%= controller->GET_DQUERY_DEFINITIONS( ) %>"
                                     header            = "<%= SEARCH->get_param_struct_name( ) %>"
                                     fieldNames        = "<%= controller->GET_POSSIBLE_FIELDS( ) %>"
                                     values            = "//SEARCH/PARAMETERS"
                                     maxHits           = "//SEARCH/MAX_HITS"
                                     ajaxDeltaHandling = "false"
                                     onEnter           = "search" />
    Here you can see that, it reads the parameter structure using the method SEARCH->get_param_struct_name( ) of
    the context node.This is used for configuration as well.
    Also if you have an F4 help for your custom attribute, you have to add it in the GET_DQUERY_DEFINITIONS( )  of the
    view controller. These additional information will help you to understand better.
    Regards
    Leon
    [SAP Community Network Forums on mobile|https://cw.sdn.sap.com/cw/ideas/7910]

Maybe you are looking for