Promoto to OD Master - errors in slapconfig.log and slapd.log

After a lot of promoting to OD Master and demoting to Standalone I have finally a OD Master that seems like it's working.
At least I can bind my clients to it and then (after reboot of the client) work with networked home-dirs Smile.
BUT I have a couple of entries in my logs that I have not seen in the testserver (I had no problems with setting up a testserver as an OD Master on a test-LAN…)
1. /Library/Logs/slapconfig.log:
Creating the keytab file
kadmin: No entry for principal xgrid/[email protected]
exists in keytab
WRFILE:/etc/krb5.keytab
kadmin: No entry for principal afpserver/[email protected]
exists in keytab
WRFILE:/etc/krb5.keytab
Creating the keytab file
kadmin: No entry for principal ldap/[email protected] exists
in keytab WRFILE:/etc/krb5.keytab
2006-03-13 22:59:23 +0100 - kerberosautoconfig command output:
The machine is standalone
Removing /Library/Preferences/edu.mit.Kerberos
2006-03-13 22:59:23 +0100 - kerberosautoconfig command failed with status 255
2006-03-13 22:59:23 +0100 - command: /usr/sbin/mkpassdb -kerberize
2006-03-13 22:59:23 +0100 - mkpassdb command output:
kadmin.local: unable to get default realm
kadmin.local: unable to get default realm
kadmin.local: unable to get default realm
2. /var/log/slapd.log:
Monday, March 13 2006 @ 05:09 pm CST
After a lot of promoting to OD Master and demoting to Standalone I have finally a OD Master that seems like it's working.
At least I can bind my clients to it and then (after reboot of the client) work with networked home-dirs Smile.
BUT I have a couple of entries in my logs that I have not seen in the testserver (I had no problems with setting up a testserver as an OD Master on a test-LAN…)
1. /Library/Logs/slapconfig.log:
Creating the keytab file
kadmin: No entry for principal xgrid/[email protected]
exists in keytab
WRFILE:/etc/krb5.keytab
kadmin: No entry for principal afpserver/[email protected]
exists in keytab
WRFILE:/etc/krb5.keytab
Creating the keytab file
kadmin: No entry for principal ldap/[email protected] exists
in keytab WRFILE:/etc/krb5.keytab
2006-03-13 22:59:23 +0100 - kerberosautoconfig command output:
The machine is standalone
Removing /Library/Preferences/edu.mit.Kerberos
2006-03-13 22:59:23 +0100 - kerberosautoconfig command failed with status 255
2006-03-13 22:59:23 +0100 - command: /usr/sbin/mkpassdb -kerberize
2006-03-13 22:59:23 +0100 - mkpassdb command output:
kadmin.local: unable to get default realm
kadmin.local: unable to get default realm
kadmin.local: unable to get default realm
2. /var/log/slapd.log:
Mar 13 23:01:00 server slapd[389]: Entry
(uid=untitled_1,cn=users,dc=server,dc=my-domain-name,dc=net):
object class 'posixAccount' requires attribute 'homeDirectory'\n
Mar 13 23:01:00 server slapd[389]: entry failed schema check: object class 'posixAccount'
requires attribute 'homeDirectory'\n
Mar 13 23:01:33 server slapd[389]: Entry
(uid=t2,cn=users,dc=server,dc=my-domain-name,dc=net): object
class 'posixAccount' requires attribute 'homeDirectory'\n
Mar 13 23:01:33 server slapd[389]: entry failed schema check: object class 'posixAccount'
requires attribute 'homeDirectory'\n
PS.:
- Just to be on the safe side I have batch-replaced the domain name with "my-domain-name" & "MY-DOMAIN-NAME"
- Some linebreaks have been added to the logs above to make the whole post more readable!
Before I made the (almost?) successfull promotion to OD Master I did:
- Make sure reverse DNS is working
- Made the server's Network Preferences DNS server point to 127.0.0.1
- Set the hostname via "sudo scutil --set HostName"
- /etc/hostconfig contains "HOSTNAME=-AUTOMATIC-"
- The server is running DNS, AFP, Web, MySQL & Mail
- How serious are the errors I can see in the logs?
- How an I fix them?
TIA From a Kerberos newbie (that had a lot of help from the O'reilly book "Mac OS X Panther Administration")
PS.: This question is also asked on the very informative site AFP548 so far with no replies:
http://www.afp548.com/forum/viewtopic.php?forum=39&showtopic=11693
G5 dual 2.0 GHz, Mac SE and a lot more…   Mac OS X (10.4.5)  

the message "kadmin.local: unable to get default realm" indicates that your
/Library/Preferences/edu.mit.Kerberos file is missing or incorrect.
Using workgroup manager look at the KerberosClient record (you may need to go into the preferences and set the "show all records" checkbox), look in the XMLPlist attribute for an xml representation of the edu.mit.Kerberos file.
as root on the OD Master, run klist -k to view keytabs (there should be 3 mostly identical entries for each service)
also as root on the OD Master, run kadmin.local -q "listprincs" to view the principals in the kdc.
Hope this gets you started
- Leland
DP G4   Mac OS X (10.4.2)  

Similar Messages

  • [svn:bz-trunk] 14330: BLZ-476 : Getting different error message in server' s servlet log and console log when class is not of expected type.

    Revision: 14330
    Revision: 14330
    Author:   [email protected]
    Date:     2010-02-22 10:03:03 -0800 (Mon, 22 Feb 2010)
    Log Message:
    BLZ-476 : Getting different error message in server's servlet log and console log when class is not of expected type.
    QA: no
    Doc: no
    checkin test : pass
    Ticket Links:
        http://bugs.adobe.com/jira/browse/BLZ-476
    Modified Paths:
        blazeds/trunk/modules/core/src/flex/messaging/MessageBrokerServlet.java

    Hi, wbracken ,
    As known, there are 2 different questions I raised.
    Regarding the reply for the second one (Nothing to do with Chinese), I noticed there are several similar issues found in this forum, and it seems no response could solve my that problem. The related methods and classes were also well check, as well as the parameters put.
    Any way, your reponse was appreciated.
    Thank you for the help.

  • [svn:bz-trunk] 14341: BLZ-476 : Getting different error message in server' s servlet log and console log when class is not of expected type.

    Revision: 14341
    Revision: 14341
    Author:   [email protected]
    Date:     2010-02-22 13:19:46 -0800 (Mon, 22 Feb 2010)
    Log Message:
    BLZ-476 : Getting different error message in server's servlet log and console log when class is not of expected type.
    Ticket Links:
        http://bugs.adobe.com/jira/browse/BLZ-476
    Modified Paths:
        blazeds/trunk/modules/core/src/flex/messaging/MessageBrokerServlet.java
        blazeds/trunk/modules/core/src/flex/messaging/util/ClassUtil.java

    Hi, wbracken ,
    As known, there are 2 different questions I raised.
    Regarding the reply for the second one (Nothing to do with Chinese), I noticed there are several similar issues found in this forum, and it seems no response could solve my that problem. The related methods and classes were also well check, as well as the parameters put.
    Any way, your reponse was appreciated.
    Thank you for the help.

  • Huge errors.log daemons.log and everything.log [SOLVED]

    Ok people i have i big problem since my last update, wich happened yesterday.
    errors.log, daemons.log and everything.log are extremly huge over 1.3G per file.
    I tried this to make them smaller with this:
    >errors.log
    >daemons.log
    >everything.log
    and this helps for about 5 mins, but after that 5 mins, those three files are growing large again.
    logrotate is in my /etc/cron.daily. Should i put it in /etc/cron.hourly. Is this gonna help me with my problem or is it something else that causes it.
    This is the message that is written over and over in errors.log:
    Jul  6 13:06:44 myhost famd[2151]: fd 4 message length 1347375956 bytes exceeds max of 4136.
    This one is from daemon.log:
    Jul  6 13:08:09 myhost famd[2151]: fd 4 message length 1347375956 bytes exceeds max of 4136.
    And this one is fron everything.log:
    Jul  6 13:09:03 myhost famd[2151]: fd 4 message length 1347375956 bytes exceeds max of 4136.
    As you can see this is the same message in all three files.
    This is the outputos ps -ax command:
      PID TTY      STAT   TIME COMMAND                                           
        1 ?        Ss     0:00 ini                                               
        2 ?        S<     0:00 [kthreadd]                                         
        3 ?        S<     0:00 [migration/0]                                     
        4 ?        S<     0:00 [ksoftirqd/0]                                     
        5 ?        S<     0:00 [watchdog/0]                                       
        6 ?        S<     0:00 [migration/1]                                     
        7 ?        R<     0:00 [ksoftirqd/1]                                     
        8 ?        S<     0:00 [watchdog/1]                                       
        9 ?        S<     0:00 [events/0]                                         
       10 ?        S<     0:00 [events/1]                                         
       11 ?        S<     0:00 [khelper]                                         
       12 ?        S<     0:00 [async/mgr]                                       
       13 ?        S<     0:00 [kblockd/0]                                       
       14 ?        S<     0:00 [kblockd/1]                                       
       15 ?        S<     0:00 [kacpid]                                           
       16 ?        S<     0:00 [kacpi_notify]                                     
       17 ?        S<     0:00 [kseriod]                                         
       18 ?        S      0:00 [khungtaskd]                                       
       19 ?        S      0:00 [pdflush]                                         
       20 ?        S      0:01 [pdflush]                                         
       21 ?        S<     0:00 [kswapd0]                                         
       22 ?        S<     0:00 [aio/0]                                           
       23 ?        S<     0:00 [aio/1]                                           
       24 ?        S<     0:00 [crypto/0]                                         
       25 ?        S<     0:00 [crypto/1]                                         
       38 ?        S<     0:00 [ata/0]                                           
       39 ?        S<     0:00 [ata/1]                                           
       40 ?        S<     0:00 [ata_aux]                                         
       44 ?        S<     0:00 [scsi_eh_0]                                       
       45 ?        S<     0:00 [scsi_eh_1]                                       
       48 ?        S<     0:00 [scsi_eh_2]                                       
       49 ?        S<     0:00 [scsi_eh_3]                                       
      309 ?        S<     0:00 [ksuspend_usbd]                                   
      331 ?        S<     0:00 [khubd]                                           
      539 ?        S<     0:00 [usbhid_resumer]                                   
      585 ?        S<     0:00 [kjournald]                                       
      609 ?        S<s    0:00 /sbin/udevd --daemon                               
      674 ?        S<     0:00 [hd-audio0]                                       
    1456 ?        S<     0:00 [kpsmoused]                                       
    1923 ?        S      0:00 supervising syslog-ng                             
    1924 ?        Ss    17:00 /usr/sbin/syslog-ng                               
    1954 ?        Ss     0:00 /sbin/dhcpcd -q eth0                               
    1970 ?        S      0:00 /usr/sbin/crond                                   
    1985 ?        Ss     0:00 /usr/bin/dbus-daemon --system                     
    1988 ?        Ss     0:00 /usr/sbin/hald                                     
    1991 ?        Ssl    0:00 /usr/sbin/console-kit-daemon                       
    1992 ?        S      0:00 hald-runner                                       
    2082 ?        S      0:00 hald-addon-input: Listening on /dev/input/event1 /dev/input/event5 /dev/input/event4
    2122 ?        S      0:00 hald-addon-storage: polling /dev/sr0 (every 16 sec)                                 
    2138 ?        S      0:00 hald-addon-acpi: listening on acpi kernel interface /proc/acpi/event               
    2143 ?        Ss     0:00 /usr/bin/rpcbind                                                                   
    2151 ?        Ss     9:37 /usr/sbin/famd -T 0 -c /etc/fam/fam.conf                                           
    2166 ?        S      0:02 /usr/bin/timidity -iAD                                                             
    2200 tty1     Ss     0:00 /bin/login --                                                                       
    2201 tty2     Ss+    0:00 /sbin/agetty -8 38400 vc/2 linux                                                   
    2202 tty3     Ss+    0:00 /sbin/agetty -8 38400 vc/3 linux                                                   
    2203 tty4     Ss+    0:00 /sbin/agetty -8 38400 vc/4 linux                                                   
    2204 tty5     Ss+    0:00 /sbin/agetty -8 38400 vc/5 linux                                                   
    2205 tty6     Ss+    0:00 /sbin/agetty -8 38400 vc/6 linux                                                   
    2206 ?        Ss     0:00 /opt/ibm/db2/V9.5/bin/db2fmcd                                                       
    2207 tty1     S      0:00 -bash                                                                               
    2210 tty1     S+     0:00 /bin/sh /usr/bin/startx                                                             
    2226 tty1     S+     0:00 xinit /home/radovan/.xinitrc -- /etc/X11/xinit/xserverrc :0 -auth /home/radovan/.serverauth.2210
    2227 tty7     S<s+   1:07 /usr/bin/X -nolisten tcp                                                                       
    2235 tty1     S      0:00 /bin/sh /usr/bin/startkde                                                                       
    2262 tty1     S      0:00 dbus-launch --sh-syntax --exit-with-session
    2263 ?        Ss     0:00 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
    2269 ?        Ss     0:00 kdeinit4: kdeinit4 Running...
    2270 ?        S      0:00 klauncher
    2272 ?        S      0:00 kded4
    2283 tty1     S      0:00 kwrapper4 ksmserver
    2284 ?        Sl     0:00 ksmserver
    2286 ?        S      0:47 kwin -session 10e0ed686f000124296811100000033390000_1243359004_612398
    2287 ?        S      0:00 /usr/bin/kwrited
    2290 ?        Sl     0:00 /usr/bin/knotify4
    2291 ?        Sl     0:35 /usr/bin/plasma
    2294 ?        Sl     0:00 /usr/bin/nepomukserver
    2296 ?        S      0:00 /usr/bin/kaccess
    2298 ?        S      0:02 /usr/bin/nepomukservicestub nepomukstorage
    2307 ?        S      0:01 /usr/bin/krunner
    2309 ?        S      0:00 /usr/bin/nepomukservicestub nepomukfilewatch
    2310 ?        S      0:00 /usr/bin/nepomukservicestub nepomukontologyloader
    2311 ?        S      0:00 /usr/bin/nepomukservicestub nepomukqueryservice
    2317 ?        S      0:00 kmix -session 10e0ed686f000124296811600000033390010_1243359004_602182
    2319 ?        R     26:01 python /usr/bin/printer-applet
    2321 ?        S      0:00 /usr/bin/klipper
    2328 ?        S      0:00 kdeinit4: kio_file [kdeinit] file local:
    2365 ?        Sl     0:00 /home/dasusr1/das/adm/db2dasrrm
    2385 ?        S      0:00 /opt/ibm/db2/V9.5/das/bin/db2fmd -i dasusr1 -m /opt/ibm/db2/V9.5/das/lib/libdb2dasgcf.so.1
    2553 ?        S      0:00 kdeinit4: kio_http [kdeinit] http local:
    2896 ?        Sl     0:00 /usr/bin/yaspd
    2897 ?        S      0:00 ksysguardd
    2931 ?        Sl     1:23 /usr/bin/firefox
    2936 ?        S      0:00 /usr/lib/GConf/gconfd-2
    3997 ?        S      0:08 /usr/bin/dolphin -icon system-file-manager -caption Dolphin /home/radovan
    4189 ?        Rl     0:03 /usr/bin/konsole
    4191 pts/1    Ss     0:00 /bin/bash
    4192 pts/1    S      0:00 su
    4193 pts/1    S      0:00 bash
    4467 pts/1    S      0:00 su radovan
    4468 pts/1    S      0:00 bash
    4490 pts/1    S      0:00 su
    4491 pts/1    S      0:01 bash
    5260 pts/1    R+     0:00 ps -ax
    Sorry for my Tarzan English. I hope someone can help me.
    Edit:Ok i have killed famd daemon and those three log files are now normal. Was it ok for me to kill it, i mean is it safe?
    Last edited by pivonroll (2009-07-06 11:59:09)

    OK i did what you suggested. It works!
    Thx man

  • Ttcwerrors.log and ttcwmesg.log file locations

    Is there an option we can set in the ttcrsagent.options file to change the location of the ttcwerrors.log and ttcwmesg.log files?
    We can change the location of the daemon user and error log files by setting the -supportlog and -userlog options in ttendaemon.options, so we were hoping we could do the same in ttcrsagent.options.
    Thanks,
    -Jules

    Unfortunately, no. The ttcw log file location is not configurable
    Simon

  • Ocsd.log and crsd.log

    I am newbie to rac, i am see the following below message in ocsd.log and crsd.log in both nodes of 10.2.0.3 windows 2003, is it any sympton to failure or error?
    And both instances of are working fine. And one more thing lots of prefix CDMP_ files are generating in bdump folder. Please advise.
    ocsd.log
    CSSD]2009-10-06 16:39:04.602 [3784] >TRACE: clssgmClientConnectMsg: Connect from con(0000000004A64DB0) proc(0000000004A5ED80) pid() proto(10:2:1:1)
    [    CSSD]2009-10-06 16:39:36.449 [3784] >TRACE: clssgmClientConnectMsg: Connect from con(0000000004A64FE0) proc(0000000004A5EF00) pid(5684) proto(10:2:1:1)
    [    CSSD]2009-10-06 16:40:05.202 [3784] >TRACE: clssgmClientConnectMsg: Connect from con(0000000004A64B80) proc(0000000004A5ED80) pid() proto(10:2:1:1)
    [    CSSD]2009-10-06 16:40:21.579 [3784] >TRACE: clssgmClientConnectMsg: Connect from con(0000000004A64DB0) proc(0000000004A5ED80) pid(2356) proto(10:2:1:1)
    [    CSSD]2009-10-06 16:41:05.787 [3784] >TRACE: clssgmClientConnectMsg: Connect from con(0000000004A64DB0) proc(0000000004A5ED80) pid() proto(10:2:1:1)
    [    CSSD]2009-10-06 16:41:09.490 [3784] >TRACE: clssgmClientConnectMsg: Connect from con(0000000004A64B80) proc(0000000004A5ED80) pid() proto(10:2:1:1)
    [    CSSD]2009-10-06 16:42:06.387 [3784] >TRACE: clssgmClientConnectMsg: Connect from con(0000000004A64DB0) proc(0000000004A5ED80) pid() proto(10:2:1:1)
    [    CSSD]2009-10-06 16:43:07.003 [3784] >TRACE: clssgmClientConnectMsg: Connect from con(0000000004A64FE0) proc(0000000004A5EF00) pid() proto(10:2:1:1)
    [    CSSD]2009-10-06 16:44:07.604 [3784] >TRACE: clssgmClientConnectMsg: Connect from con(0000000004A65210) proc(0000000004A5EF00) pid() proto(10:2:1:1)
    [    CSSD]2009-10-06 16:44:09.994 [3784] >TRACE: clssgmClientConnectMsg: Connect from con(0000000004A64FE0) proc(0000000004A5EF00) pid() proto(10:2:1:1)
    [    CSSD]2009-10-06 16:44:26.090 [3784] >TRACE: clssgmClientConnectMsg: Connect from con(0000000004A65210) proc(0000000004A5EF00) pid(6008) proto(10:2:1:1)
    [    CSSD]2009-10-06 16:45:08.188 [3784] >TRACE: clssgmClientConnectMsg: Connect from con(0000000004A64B80) proc(0000000004A5ED80) pid() proto(10:2:1:1)
    [    CSSD]2009-10-06 16:46:08.773 [3784] >TRACE: clssgmClientConnectMsg: Connect from con(0000000004A64DB0) proc(0000000004A5ED80) pid() proto(10:2:1:1)
    [    CSSD]2009-10-06 16:46:16.164 [3784] >TRACE: clssgmClientConnectMsg: Connect from con(0000000004A64B80) proc(0000000004A5ED80) pid() proto(10:2:1:1)
    [    CSSD]2009-10-06 16:47:09.373 [3784] >TRACE: clssgmClientConnectMsg: Connect from con(0000000004A64B80) proc(0000000004A5ED80) pid() proto(10:2:1:1)
    [    CSSD]2009-10-06 16:47:20.812 [3784] >TRACE: clssgmClientConnectMsg: Connect from con(0000000004A64DB0) proc(0000000004A5ED80) pid() proto(10:2:1:1)
    [    CSSD]2009-10-06 16:48:09.974 [3784] >TRACE: clssgmClientConnectMsg: Connect from con(0000000004A64DB0) proc(0000000004A5ED80) pid() proto(10:2:1:1)
    [    CSSD]2009-10-06 16:49:10.543 [3784] >TRACE: clssgmClientConnectMsg: Connect from con(0000000004A64B80) proc(0000000004A5ED80) pid() proto(10:2:1:1)
    [    CSSD]2009-10-06 16:50:11.127 [3784] >TRACE: clssgmClientConnectMsg: Connect from con(0000000004A64DB0) proc(0000000004A5ED80) pid() proto(10:2:1:1)
    [    CSSD]2009-10-06 16:51:10.040 [3784] >TRACE: clssgmClientConnectMsg: Connect from con(0000000004A64B80) proc(0000000004A5ED80) pid() proto(10:2:1:1)
    [    CSSD]2009-10-06 16:51:11.712 [3784] >TRACE: clssgmClientConnectMsg: Connect from con(0000000004A64DB0) proc(0000000004A5ED80) pid() proto(10:2:1:1)
    [    CSSD]2009-10-06 16:52:12.297 [3784] >TRACE: clssgmClientConnectMsg: Connect from con(0000000004A64B80) proc(0000000004A5ED80) pid() proto(10:2:1:1)
    [    CSSD]2009-10-06 16:52:45.676 [3784] >TRACE: clssgmClientConnectMsg: Connect from con(0000000004A64DB0) proc(0000000004A5ED80) pid(548) proto(10:2:1:1)
    [    CSSD]2009-10-06 16:53:12.897 [3784] >TRACE: clssgmClientConnectMsg: Connect from con(0000000004A65670) proc(0000000004A5EA80) pid() proto(10:2:1:1)
    10/06/09 14:41:01 entered scmhandler 4 tid = 2544 pid = 2548
    10/06/09 14:56:01 entered scmhandler 4 tid = 2544 pid = 2548
    10/06/09 14:56:59 entered scmhandler 4 tid = 2544 pid = 2548
    10/06/09 15:11:03 entered scmhandler 4 tid = 2544 pid = 2548
    10/06/09 15:26:01 entered scmhandler 4 tid = 2544 pid = 2548
    10/06/09 15:41:01 entered scmhandler 4 tid = 2544 pid = 2548
    10/06/09 15:56:03 entered scmhandler 4 tid = 2544 pid = 2548
    10/06/09 16:11:01 entered scmhandler 4 tid = 2544 pid = 2548
    10/06/09 16:26:01 entered scmhandler 4 tid = 2544 pid = 2548
    10/06/09 16:41:01 entered scmhandler 4 tid = 2544 pid = 2548
    10/06/09 16:56:04 entered scmhandler 4 tid = 2544 pid = 2548
    10/06/09 16:56:59 entered scmhandler 4 tid = 2544 pid = 2548

    Check Document Id : 400778.1
    Thanks

  • Diff bteween trace,log and audit log

    Diff bteween trace,log and audit log....?
    Harsha

    Hi,
    Audit Log :The adapter engine uses the messaging system to log the messages at every stage, This log is called the Audit Log.
    The audit log can be viewed from the runtime work bench(RWB) to look into the details of the life cycle of the message. During our journey we will also have a look at the messages that are logged at different stages.
    Audit logs are mainly used to trace our messages. In case of any failures, we can easily trace where message stands. we can give the entries for the logs in UDFs, custom modules etc..
    Audit logs are generally gives us the sequence of the steps from where the message is picked up with file name and path and how the message is sent to the I.E pipeline..it also shows the status of the message like DLNG,DLVD like that...generally we look into the audit logs if there are any errors in message processing...
    It gives the complete log of your message.
    Go to RWB --> Component Monitoring --> Adapter Engine --> Communication channel Monitoring --> Select the Communicatin channel --> click on use filter --> then click on the Message Id.
    Trace Log:
    Log file:
    A log file contains generally intelligible information for system administrators. The information is sorted by categories and is used for system monitoring. Problem sources or critical information about the status of the system are logged in this file. If error messages occur, you can determine the software component that has caused the error using the location. If the log message does not provide enough details to eliminate the problem, you can find more detailed information about the error in the trace file.
    The log file is located in the file system under
    "/usr/sap/SID/instance/j2ee/cluster/server[N]/log/applications.[n].log" for every N server node.
    Access the file with the log viewer service of the J2EE visual administrator or with the standalone log viewer.
    Trace file:
    A trace file contains detailed information for developers. This information can be very cryptic and extensive. It is sorted by location, which means by software packages in the Java environment, for example, "com.sap.aii.af". The trace file is used to analyze runtime errors. By setting a specific trace level for specific locations, you can analyze the behavior of individual code segments on class and method level. The file should be analyzed by SAP developers or experienced administrators.
    The trace file is located in the file system under
    "/usr/sap/SID/instance/j2ee/cluster/server[N]/log/defaultTrace.[x].trc" for each N server node.
    Access the file with the log viewer service of the J2EE visual administrator or with the standalone log viewer.
    Thanks
    Virkanth

  • Difference between sysout log and server log???

    Hi All,
    from the long time am trying to find out the difference between sysout log and server log, can anyone please share me the info regarding that?
    Thanks.

    Server Logs
    The server log records information about events such as the startup and shutdown of servers,the deployment of new applications, or the failure of one or more subsystems. The messages include information about the time and date of the event as well as the ID of the user who initiated the event.
    Standard output logs
    In addition to writing messages to a log file, each server instance prints a subset of its messages to standard out. Usually, standard out is the shell (command prompt) in which you are running the server instance.WebLogic Server administrators and developers configure logging output and filter log messages to troubleshoot errors or to receive notification for specific events.
    Regards
    Fabian

  • Maximal log file exceeded (freshclam.log and clamav.log)

    Hello,
    Some of my log files (freshclam.log and clamav.log) are no longer logging, they display this error message:
    Log size = 7782920, max = 1048576
    LOGGING DISABLED (Maximal log file size exceeded).
    and
    Log size = 1049052, max = 1048576
    LOGGING DISABLED (Maximal log file size exceeded).
    I have tried editing /etc/clamd.conf and changing the log size to 0, but that has not helped.
    Thank you for your help in advance.

    Thank you.
    I think somewhere along the way, the checkbox to archive logs was unchecked. I'm not sure why.
    Anyway, I checked that box (and set it to rotate every 7 days), then I backed up the current log files and touched new log files. That's working for now, and hopefully they'll archive on their own now.

  • Exception.log and mail.log stopped logging (MX7)

    Hi all - we have been experiencing intermittent problems with our MX 7.02 server & checked the log files to help diagnose the problem.
    However both exception.log and mail.log appear to have stopped logging information in June 2010.
    The size of the logfiles is only 178K and 34K.
    Does anyone know why they've stopped & how to restart the logging?
    Many thanks
    cf_rog

    On CF7 as far as I know you need to restart the CF server. In CF9 you
    can selectively enable/disable logging for those files and thus
    attempt to restart logging.
    Mack

  • Control the size of Essbase.log and application log

    Understand that there are many message were written to the Essbase.log and application log. Is there any method to control what kind of message to be written to the log file so as to reduce the IO frequency of the server disk folders?
    Thanks for your help!

    CL wrote:
    You might want to think about forcing your BSO/ASO PAG & IND/DAT files to go onto a separate drive volume from your base Essbase binaries. This can be tough to do in a SAN environment as it is difficult to know what is truly where.
    Another option would be to use CLEARLOGFILE to reset the logs (this will delete them every time you stop/restart Essbase, so make sure you archive them if you need log history).
    See: http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_esb_techref/config/clearlogfile.htm
    Yet another would be to set SSLOGUNKNWON to false to cut down on the log.
    See: http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_esb_techref/config/sslogunknown.htm
    Regards,
    Cameron LackpourThanks! We already separate the log files from the data files but they still in the same hardware server. Yes, in SAN environment we really don't know where it the physical drive.
    Essbase do not have log rotate option like Apache and maybe we should archive the essbase log regularly and clear it up.
    We don't have much unknown member case in our log. Anyway we will investigate the option SSLOGUNKNOWN
    Thanks again!

  • Redo Log and Supplemental Logging related doubts

    Hi Friends,
    I am studying Supplemental logging in detail. Have read lots of articles and oracle documentation about it and redo logs. But couldnot found answers of some doubts..
    Please help me clear it.
    Scenario: we have one table with primary key. And we execute an update query on that table which is not using the primary key column in any clause..
    Question: In this case, does the redo log entry generated for the changes done by update query contain the primary columns values..?
    Question: If we have any table with primary key, do we need to enable the supplemental logging on primary columns of that table? If yes, in which circumstances, do we need to enable it?
    Question: If we have to configure stream replication on that table(having primary key), why do we actually need to enable its supplemental logging ( I have read the documentation saying that stream requires some more information so.., but actually what information does it need. Again this question is highly related to the first question.)
    Also please suggest any good article/site which provide inside details of redo log and supplemental logging, if you know.
    Regards,
    Dipali..

    1) Assuming you are not updating the primary key column and supplemental logging is not enabled, Oracle doesn't need to log the primary key column to the redo log, just the ROWID.
    2) Is rather hard to answer without being tautological. You need to enable supplemental logging if and only if you have some downstream use for additional columns in the redo logs. Streams, and those technologies built on top of Streams, are the most common reason for enabling supplemental logging.
    3) If you execute an update statement like
    UPDATE some_table
      SET some_column = new_value
    WHERE primary_key = some_key_value
       AND <<other conditions as well>>and look at an update statement that LogMiner builds from the redo logs in the absence of supplemental logging, it would basically be something like
    UPDATE some_table
      SET some_column = new_value
    WHERE rowid = rowid_of_the_row_you_updatedOracle doesn't need to replay the exact SQL statement you issued, (and thus it doesn't have to write the SQL statement to the redo log, it doesn't have to worry if the UPDATE takes a long time to run (otherwise, it would take as long to apply an archived log as it did to generate the log, which would be disasterous in a recovery situation), etc). It just needs to reconstruct the SQL statement from the information in redo, which is just the ROWID and the column(s) that changed.
    If you try to run this statement on a different database (via Streams, for example) the ROWIDs on the destination database are likely totally different (since a ROWID is just a physical address of a row on disk). So adding supplemental logging tells Oracle to log the primary key column to redo and allows LogMiner/ Streams/ etc. to reconstruct the statement using the primary key values for the changed rows, which would be the same on both the source and destination databases.
    Justin

  • Adadmin.log and adpatch.log files

    Hi All,
    Is it safe to delete the "adadmin.log" and "adpatch.log" from $APPL_TOP/admin/PROD/log directory ?
    These log files are really big and consuming space.
    Thanks,

    Afia wrote:
    Hi All,
    Is it safe to delete the "adadmin.log" and "adpatch.log" from $APPL_TOP/admin/PROD/log directory ?
    These log files are really big and consuming space.
    Thanks,Yes it is safe to delete them.
    How ever i would suggest you to zip them with some date conventions like from10dec12_to_13mar13 and save it for later reference and delete the originals
    As it is text the compression ratio will be high. It will make it much smaller.
    Thanks

  • Difference between Tuxedo Logs and Appserver Logs

    Hello
    What is the difference between Tuxedo Logs and Appserver Logs? What are the scenarios to look into Tuxedo Logs and Appserver Logs?
    Thanks

    The application server log keep the application informations and trace.
    The tuxedo log keep the application server management informations and trace.
    Nicolas.

  • World readable permissions on the tterrors.log and ttmesg.log

    Is it possible to get timesten to create the tterrors.log and ttmesg.log with world readable permissions?
    Regards
    Chris

    It sounds like you should just turn off Maintain Previews for the project you are on (selct prj and change state in top level gear menu in prj pane) - then make your adjustments ( your previews won't be up to date then of course) but the when you are ready to make into previews just select all the images and choose Update Preview manually from the context menu.
    LC, Classic, 8500, DP2.5, MBP2.1   Mac OS X (10.4.7)   i have a cool mousepad

Maybe you are looking for

  • Partner Change Event not working

    Hi, I have created a WF which has start event as Attribute change and Partner Change. 1st when i save the details on UI the WF triggers but next time if i add any partner functin on UI only partner function and no change in attribute the WF does not

  • I have an external hard drive which has my i-photo on it

    I have an external hard drive which has my i-photo on it & some movies from i-movie that I have on disk now. But for some reason my ehd has a caution symbol on it & I can't move my event to free up space on my hd so that I can export i-movie events.

  • Stuck in mac OS installer

    I am stuck in mac os installer after trying to repair my disk by starting up from my install disc. it failed to repair claiming node trouble. Now when I get to choose my hard drive it quits after trying to restart. Other times it does not even give m

  • Business process check-in/check-out - who has checked out and when?

    We have been using the business process check-in/check-out functionality for 18 months and there are an increasing number of process's that have been checked out to the maintenance project and never checked in again. Is there a straight forward way i

  • Configuring the Task Gateway Service: Web Service Config = Single Service Config?

    Hello, I am following the steps of the SAP NW GTW 2.0 SP06 configuration guide, and am a bit stuck on the section Configuring the Task Gateway Service. In step 3, we are instructed to choose the option Single Service Configuration. However, I don't s