Prompt description as a key

Hello,
I would want to know if there is a possibility of doing a prompt in webi where you show a field description but when the query is being executed, it takes the key
Regards
Javi

Hello Javi,
This corresponds to a feature known as index-aware prompts, when such prompts are enabled, user is required to select values from a list (showing captions) and prompt is resolved with keys associated with the selection.
This is set with universe designer, as you define universe objects, object properties panel provides a tab called Keys where you can define which database fields should be used as either primary or foreign key for the corresponding object. When such objects are then used in list of values (LOV) for prompts, it will then be handled as an index-aware prompt.
Hope that helps,
David.

Similar Messages

Material Description in Language key

Hi all,
Is it possible to enter more than one material description per language? Or Can I create another language key and enter more than one material description in additional data in material master?
thanks.

Hi again,
I want to enter more than one discription with same language key not one for one.
f
or example ı want to create a language key like Z1
Language key .......Description
Z1 ........................Material Desc. 1
Z1.........................Material Desc. 2
is it possible?
Edited by: Nursa on Mar 29, 2008 12:39 PM

Sort characteristic in web report is done by description instead of key

Guru's,
We've build a web report. In the row we use characteristic 0FUNDS_CTR. We show both key and description. When we sort this characteristic it is done on description, not on the key.
How can we sort on the key???
Regards,
René

Hi:
DId you go to the InfoObject properties in Query Designer.
Its right there.
More into:
Right Click on the InfoObject in the Query Designer (in Rows)
Go down there and see Sort Order. Make the check box - ON.
Here, give the preferences by KEY, Ascending, etc.
Ram C.
Message was edited by:
Ram Chamarty

Adobe Std XI installed but prompted for dutch lincense key

hi all,
I have an English Win7 OS with my regional settings in Dutch
When I install Adobe Std XI English version and I want to convert a Word (office 2010 - English version) file to pdf I get prompted for the Dutch license key in Adobe.
Stange enough when I open my Adobe std XI it is in English and registered. The prompt is in Dutch..
I think I am missing something,..
When setting regional settings to Australia f.e. it works fine.. But I need the regional settings for number formatting in Excel f.e.
Thx Tessa

To the best of my knowledge, the license key has nothing to do with the language version. The language is selected based on either the default on your system or by the optional settings (Adobe was not real clear in denoting the "custom" install as most folks think of it and gave it some other name, like optional (OK, I forgot the name).

Prompted for Windows product key after FBReseal.exe

Greetings,
With the EOL of Windows XP fast approaching, we are planning to deploy POSReady 2009 to several cash registers. My plan is to install the POSReady 2009 Ghost image provided by our vender/OEM, make our site specific modifications, then run fbreseal
and create a new image for deployment. My problem is that after I run fbreseal (and then simply reboot the register as a test) the setup wizard asks me for a Windows product key (which I don't have and can't get because OEMs can not give it to customers).
I thought that the entire purpose of fbreseal was for cases like this when you do not have a Windows product key? What am I missing? Is there a hidden switch I should be using with FBReseal?
Thanks,
Dasani

I had found/read the document... I guess the fourth paragraph had led me to believe that FBReseal would not ask for the product key:
"Sysprep is useful in scenarios when you have access to your POSReady product key, and also provides additional customizing functionality over FBReseal. FBReseal does not require a product key, but it does not have as many features as Sysprep, and it can
only be run one time. If you do not have access to your POSReady product key, you must use FBReseal."
When I apply the Ghost image from the vender and start the register I get the following prompts:
- Welcome Screen
- I have to accept the license agreement
- Choose regional/language options
- Define my name/organization
- Define computer name and administrator password
When I FBReseal it and then restart, I get the exact same prompts EXCEPT after I define my name and organization it asks for the Windows product key.
I suspect the vender did not prepare our Ghost image properly, it appears that they may have ran FBReseal. Based on the POSReady 2009 deployment guide, this should not be done:
http://technet.microsoft.com/en-us/library/dd936220(v=winembedded.0).aspx
"The product ID (PID) that is required to license the OS is only available to an OEM. End users receive a fully installed OS that can be customized. It is important to understand the state of the POSReady OS that you receive from your OEM. The original installation
of POSReady must be prepared by the OEM by using the Sysprep utility. This will put the OS image in a state that is ready to be customized and cloned. The OEM must not use FBReseal to prepare the computer for cloning. The suggested cloning method, which uses
Windows Deployment Services, will only recognize a device that has had a full Sysprep pass. The OEM will likely provide two sets of media to aid in the POSReady customization process:"
Anyway, since the vender I'm working with is slow.... it appears I may have no choice but use their Ghost image and then apply all of our customizations to each and every register.
Thanks,
Dasani

Showing description and not key when using check tables in Web UI

Hi,
I have added an field using EEWB to Opportunity Item, and connected it to check table CRMC_CUSTGRP1. It shows fine, and we can select from the check table using the web ui.
However it shows the key column and not description column from the table. Is there a way to make the web ui show description instead of the key?
Regards
Mattias

Hi,
I debugged GET_V_S_STRUCT, and it tries calling
ME->VIEW_DESCRIPTOR->GET_FIELD_GEN_VALUEHELP_DL
ME-VIEW_DESCRIPTOR is an instance of class CL_BSP_DLC_VIEW_DESCRIPTION, which does not contain the method GET_FIELD_GEN_VALUEHELP_DL, and obviously it throws an CX_SY_DYN_CALL_ILLEGAL_METHOD exception, which leaves the value table empty.
Do you have any idea why, or have I missed something fundamental?
Regards
Mattias
Edited by: Mattias Johansson on Nov 14, 2008 11:05 AM

"Show Description" for podcasts--key equivalent?

Is there any way, directly or via a decent fudge, to have a command-key equivalent for the "Show Description" selection you can get for a podcast via the contextual menu? I use this a lot, and right-clicking over and over is irritatingly slow. Yes, I know you can leave the window open, but I also use this on my MacBook, where screen real estate is somewhat precious.
I tried Show Description from Doug's Applescripts
http://dougscripts.com/itunes/scripts/ss.php?sp=showdescription
but not only does it bring up a different window (not the same one you get from the contextual menu) but what you get is mostly code and not easily read. I don't want to edit the code, just see the long description.

After selcting the value from F4 press enter, it will go through the PAI and PBO. Write the code to select the description from that check table and pass into that description field. In the attributes of that description field, goto Program tab Check the check box Output field and Output only.
Check the sample program:
TABLES: addr1_data.
DATA: ws_country_desc TYPE t005t-landx,
      okcode TYPE sy-ucomm.
CALL SCREEN 100.
*&      Module status_0100 OUTPUT
      text
MODULE status_0100 OUTPUT.
IF NOT addr1_data-country IS INITIAL.
    SELECT SINGLE landx FROM t005t INTO ws_country_desc WHERE
                                  land1 = addr1_data-country
                              AND spras = 'EN'.
ENDIF.
ENDMODULE.                 " status_0100 OUTPUT
*&      Module user_command_0100 INPUT
      text
MODULE user_command_0100 INPUT.
ENDMODULE.                 " user_command_0100 INPUT
Regards,
Prakash.

Creating Descriptive & Key FLEXFIELDS in Forms 10g

Hello everyone,
I want to create Descriptive & Key Flexfields in Oracle Forms 10g,Kindly help........

A FLEXFIELD IS A FIELD MADE UP OF SUB–FIELDS, OR SEGMENTS. THERE ARE TWO TYPES OF FLEXFIELDS: KEY FLEXFIELDS AND DESCRIPTIVE FLEXFIELDS.
KEY FLEXFIELDS:
I HAVE A COLUMN CALLED ADDRESS(SINGLE FIELD),WHEN I KEEP MY CURSOR ON THIS FIELD AND PRESS ENTER,IT POP'S UP A WINDOW WITH ALL NECESSARY FIELDS CORRESPONDING TO ADDRESS LIKE,DOOR-NO.,STREET NAME,CITY ETC.... WITH AN OK & CANCEL BUTTON.
ONCE I GIVE THE VALUES ACCORDINGLY IN THE ADDRESS FIELD AND CLICK OK BUTTON IT STORES ALL THE VALUES IN WINDOW TO THE ADDRESS FIELD.
DESCRIPTIVE FLEXFIELDS:
DESCRIPTIVE FLEXFIELDS LETS YOU ADD ADDITIONAL FIELDS TO THE FORM IN ORDER TO TRACK ADDITIONAL INFORMATION NEEDED BY THE BUSINESS, THAT WOULD NOT BE CAPTURED BY THE STANDARD FORM. DESCRIPTIVE FLEXFIELDS CAN BE CONTEXT SENSITIVE, WHERE THE INFORMATION YOUR APPLICATION STORES DEPENDS ON OTHER VALUES YOUR USERS ENTER IN OTHER PARTS OF THE FORM.
A DESCRIPTIVE FLEXFIELD APPEARS ON A FORM AS A SINGLE–CHARACTER, UNNAMED FIELD ENCLOSED IN SQUARE BRACKETS [ ]. EACH FIELD OR SEGMENT IN A DESCRIPTIVE FLEXFIELD HAS A PROMPT AND CAN HAVE A SET OF VALID VALUES
THIS CONCEPT IS USED FREQUENTLY IN ORACLE APPLICATIONS, WHICH I WANT TO IMPLEMENT IN FORMS 10G.I BELIEVE WITH YOUR EXPERTISE I WILL BE ABLE TO AHIEVE IT.
REGARDS ,
SRINI.

CREATING KEY & DESCRIPTIVE FLEXFIELDS IN FORMS 10G

HELLO EVERYONE,
kINDLY HELP ME CREATING KEY & DESCRIPTIVE FLEXFIELDS IN FORMS 10G.STEP BY STEP PROCEDURE IN FORMS 10 G WILL HELP ME REALLY.
REGARDS,
Srini.

A FLEXFIELD IS A FIELD MADE UP OF SUB–FIELDS, OR SEGMENTS. THERE ARE TWO TYPES OF FLEXFIELDS: KEY FLEXFIELDS AND DESCRIPTIVE FLEXFIELDS.
KEY FLEXFIELDS:
I HAVE A COLUMN CALLED ADDRESS(SINGLE FIELD),WHEN I KEEP MY CURSOR ON THIS FIELD AND PRESS ENTER,IT POP'S UP A WINDOW WITH ALL NECESSARY FIELDS CORRESPONDING TO ADDRESS LIKE,DOOR-NO.,STREET NAME,CITY ETC.... WITH AN OK & CANCEL BUTTON.
ONCE I GIVE THE VALUES ACCORDINGLY IN THE ADDRESS FIELD AND CLICK OK BUTTON IT STORES ALL THE VALUES IN WINDOW TO THE ADDRESS FIELD.
DESCRIPTIVE FLEXFIELDS:
DESCRIPTIVE FLEXFIELDS LETS YOU ADD ADDITIONAL FIELDS TO THE FORM IN ORDER TO TRACK ADDITIONAL INFORMATION NEEDED BY THE BUSINESS, THAT WOULD NOT BE CAPTURED BY THE STANDARD FORM. DESCRIPTIVE FLEXFIELDS CAN BE CONTEXT SENSITIVE, WHERE THE INFORMATION YOUR APPLICATION STORES DEPENDS ON OTHER VALUES YOUR USERS ENTER IN OTHER PARTS OF THE FORM.
A DESCRIPTIVE FLEXFIELD APPEARS ON A FORM AS A SINGLE–CHARACTER, UNNAMED FIELD ENCLOSED IN SQUARE BRACKETS [ ]. EACH FIELD OR SEGMENT IN A DESCRIPTIVE FLEXFIELD HAS A PROMPT AND CAN HAVE A SET OF VALID VALUES
THIS CONCEPT IS USED FREQUENTLY IN ORACLE APPLICATIONS, WHICH I WANT TO IMPLEMENT IN FORMS 10G.I BELIEVE WITH YOUR EXPERTISE I WILL BE ABLE TO AHIEVE IT.
REGARDS ,
SRINI.

Program or FM tochange description of key figure in all queries at a time

Hi,
As per my requirement i need to change the description of a key figure from OED to IEG in all the reports which are containing "OED" as key figure at Query level only.
Its a KF and not a resteicted key figure or calculated KF.
Is there any program or table or Function module where we can change the key figure description directly
without going to each Query and change it.
Please suggest me.
Thanks & Regards
Bharathi

texts for key figures chars. etc are refrenced only once when query is created. after that if description changes in the infoobject that doesn't reflect in query.
Texts for all elements are maintained in RSZELTTXT table. you can write a simple program to modify texts of elements which suit your need. Contact any abaper in your team to write this program which simply updates the texts of certain elements..
logic may be like this
select all lines from RSZELTTXT where TXTSH = 'Plant' or TXTLG = 'Plant'.
modify these llnes with new text.
update rszelttxt with these new lines

How do I display only key instead of description in MDX query

Hi,
Whenever I try to display material number, QN number.... in MDX it only displays the description instead of key. In query designer, it says "display as key and text". How do I display the key only instead of text?
Thanks,
Duy

I used your query and pointed to my query and the result is as expected - both key and text. I'm not sure what is different between our IO and mine.
SELECT [Measures].MEMBERS ON COLUMNS,
[0VENDOR].[LEVEL01].MEMBERS
PROPERTIES [0VENDOR].[20VENDOR] ON ROWS
FROM [MY QUERY]
then I tried to hardcode the value it only showed me just the text. I tried different ways to make it show either just the key or both - but couldnt figure out. And one more thing I confirm is that the display settings in Bex really DOESNT matter or taken into consideration my MDX.
SELECT [Measures].MEMBERS ON COLUMNS,
{[0VENDOR].[ABCD]} ON ROWS
FROM [MYQUERY]
let me know if were able to figure it out
Try the below statement and see what it does
SELECT [Measures].MEMBERS ON COLUMNS,
NON EMPTY [0NOTIFICATN__0NOT_TYPE].[LEVEL01].MEMBERS
DIMENSION PROPERTIES [0NOTIFICATN__0NOT_TYPE].[20NOTIFICATN__0NOT_TYPE] ON ROWS
FROM [YOURQUERY]
Edited by: voodi on Sep 28, 2010 3:08 PM

Windows 8 setup does not prompt for license key, then fails, on hp envy notebook

Hi,
I am trying to install Windows 8 pro on an hp envy dv7 notebook, that came with a Windows 8 home pre-installed.
I tried by running the setup from the CD inserted while Windows was running, but setup complained that no license key matched the CD and faled. Strange enough,
setup did not prompt for any license key!
I tried the setup on another, older PC, there it did prompt for license key and setup ended well. At least it was not the CD.
Then I retried booting from setup CD, it loaded files, then started the setup without promptiing for any license key, and failed again.
Then I tried with a Windows 7 CD, same behavior, not prompting for license key and fail to setup.
Then I "repaired" Windows by booting from CD and reformatting the hard drive, dropping all Windows partitions, then restart setup from CD, but it still behaved the same way: not prompting for license key, and failing to setup.
I called the HP support, and they answered that it was a problem for Microsoft (what a good support, the only place where the problem occurs is the hp computer, but let the Customer call Microsoft instead).
So here I am, did any of you use an hp computer, and succeeded in installing Windows 8 PRO NFR from Technet plus on it?
Regards
Pierre

Hi,
I am trying to install Windows 8 pro on an hp envy dv7 notebook, that came with a Windows 8 home pre-installed.
I tried by running the setup from the CD inserted while Windows was running, but setup complained that no license key matched the CD and faled. Strange enough,
setup did not prompt for any license key!
I tried the setup on another, older PC, there it did prompt for license key and setup ended well. At least it was not the CD.
Then I retried booting from setup CD, it loaded files, then started the setup without promptiing for any license key, and failed again.
Then I tried with a Windows 7 CD, same behavior, not prompting for license key and fail to setup.
Then I "repaired" Windows by booting from CD and reformatting the hard drive, dropping all Windows partitions, then restart setup from CD, but it still behaved the same way: not prompting for license key, and failing to setup.
I called the HP support, and they answered that it was a problem for Microsoft (what a good support, the only place where the problem occurs is the hp computer, but let the Customer call Microsoft instead).
So here I am, did any of you use an hp computer, and succeeded in installing Windows 8 PRO NFR from Technet plus on it?
Regards
Pierre
Is it a Chinese Editon preinstalled in HP notebook?
Windows 8 preinstall machine includes a license key in system firmware. So Windows 8 setup will use this key rather than pop up product key input text pop. It is a Microsoft by design issue. So no good mathod to workaround this problem.
http://whqlcn.wordpress.com

Activate standard badi - prompts for Object Key?

In SE19 when trying to activate an SAP delivered implementation of a badi I'm prompted for an object key for the implementation class.
fyi Running ECC6 on Basis 7 kb14.
Go to SE19
Display badi FIAA_BW_DELTA_UPDATE
Go to environment menu, choose activate.
Notice that the activate option is greyed out?
Go back and change the FIAA_BW_DELETA_UPDATE badi implementation.      Go to environment menu, choose activate. You'll be prompted for an object key for the implementing class - CL_IM_FIAA_BW_DELTA_UPDATE.
Is this correct behavior?   We don't want to change the class - just activate it.    Could I get around this by copying the class changing the implementation class to a ZCL_IM_FIAA_BW_DELTA_UPDATE?
Thanks in advance for any help on this topic.

Hi Ryan.
You need to apply an OSS note for this
Please check the extract below..it will solve the problem
check the following Notes.
Check these OSS Notes - 828240, 688477 and 590034,599896
Note Pasted below :
When you load the delta-enabled InfoSources of asset accounting, no time stamp information is updated in the OLTP system if you have selected "Simulation of the delta process initialization" (initialization without data transfer; technical mode 'S') as the update mode.
This affects the InfoSources:
1. 0ASSET_ATTR_TEXT
2. 0ASSET_AFAB_ATTR
3. 0FI_AA_11
4. 0FI_AA_12
As a result of the error, you cannot start delta extraction after the initialization without data transfer because the delta extractor does not find any time stamp information it can use.
Other terms
RSA3, BWOM2_TIMEST, delta, DeltaInit, BWFIT, 0FI_GL_4, BWFIT_GET_TIMESTAMPS, BWFIT_RESET_TIMESTAMPS, BWFIT_UPDATE_TIMESTAMPS
Reason and Prerequisites
a) The problem is caused by a program error.
b) The 'FIAA_BW_DELTA_UPDATE' BADI is not active.
Solution
For a: Implement the source code corrections to create a correct time stamp for the initialization without data transfer.
For b: For a data extraction to the BW system according to the delta method, the 'FIAA_BW_DELTA_UPDATE' BADI must be active. When assets are changed, this BADI writes the corresponding change entries which are read by the extractors to determine the delta values. If this BADI is not active, the extraction terminates with error BWFIAA 001 (BAdI implementation FIAA_BW_DELTA_UPDATE inactive in source system). During a DeltaInit extraction with data transfer, the system flags the data request as incorrect or canceled in the monitor and issues the error message. However, during the DeltaInit extraction without data transfer, the system does not issue an error in the BW system even though the extractor triggered an error message and the termination of the extraction in the OLTP system. The data request in the BW system has the status 'successful' and the user cannot see that an error has occurred. However, a time stamp is not created in these cases since the following delta extractions would cause inconsistencies because the BADI would not be able to log all changes that have occurred since the last extraction.
Regards
Byju

Loading key and/or description from BW into BPC

Dear all,
We have the requirement to load master data from BW into BPC 10 NW (SP4) and are facing some difficulties.
Depending on the property, we want to do the following:
- Load the attribute key into BPC property
- Load the attribute description into BPC property
- Load both concatenated using an underscore into BPC property
The loading process as such works and the concatenation would aswell, but so far I'm only able to load the keys into BPC. In the BW table I can see that the attribute has both a key and a description but I don't know how to select the description in BPC (either through transformation file, set selection, ...). Is there a standard functionality to select between a key and a description in BPC 10 or do I have to ask the BW-team to make an additional attribute with the description as a key?
Same goes for loading the member ID's and member descriptions for a specific dimension. There we want to fill the member ID in BPC with the BW description and use another BW description to fill the member description in BPC.
Any advice/input would be greatly appreciated!
Thanks in advance,
Matthias

Hi Matthias,
I have the same problem and I don't know how to solve it.
While loading master data into BPC InfoObjects (or as called in BPC jargon "Dimensions") I found out, that it is possible to load the Attribute ID's relatetd to the InfoObject, while it is not possible to load the corresponding descriptions.
Actually I cant help you with my post. But atrouble shared is a trouble halfed
I would be pleased if somebody could offer any solution to this problem
Kind Regards,
George

Not prompted for encrytion key for /dev/mapper/home

I never had a problem setting up encryption on my last laptop, but for some reason on this new laptop I am having the hardest time with this...
I tried installing about four times because I thought I missed something. I have 3 partitions /boot , / and /home, during boot / prompts me for a key and works fine, but it doesnt bother asking me for a key for /home
In my /etc/crypttab i have
home /dev/mapper/home ASK
in my /etc/fstab i have
/dev/mapper/home /home ext4 defaults 0 1
during the install I did everything I thought necessary from the various archlinux wiki pages on encryption.
am I missing something?(obviously I am)

Here try this:
If you using WZC or the built-in wireless utlity of windows.
Go to network connections > right click the wireless network connections >
Go to the wireless network tab > delete all the prefered networks >
Try to reconnect to the wireless network again
If your using Linksys wireless utility or WLAN
Open the software > Go to the profile tab and delete all that you dont need
Try to reconnect to the network again
The profile or the prefered networks are lists of all the networks you have ever connectec to. I believe you did not change the SSID of your network when you secured thus your computer detects it still as an unsecured network
hope this help
"Give them nothing... But take from them everything..."
-Leonidas "300"

Prompt description as a key

Similar Messages

Maybe you are looking for