Prompt for Customizing request when saving Sales Employee (VPE1)

Hi,
When we try to create Sales Personnel through SD Menu path (VPE1), on saving the system prompts for customizing  request. Since this transaction is a master data and we dont transport this data to our production system. Suggest me a way to avoid this transport request while creating Sales Personnel.
We are currently using version 3.1i and upgrading to ECC6.0. In 3.1i we use transaction PAL1 to create Sales Personnel However it will not prompt for Customizing request
Also checked the SAP Note Note 854390 - FAQ: Use of the sales representative in SD without HR
Help me on how to turn off this customizing request. Basis and Security team could not able to turn this off.
Regards,
Pradeep Maddi

hello, friend.
you have 2 choices:
1.  create a transport request, save the data but do not release it for transport.
2.  when the dialog asks you for transport request, just close this.  the system will give you a message about links.  just ignore it.
hope this helped.  reward if so.
regards.

Similar Messages

  • Prompt for customizing request while saving changes on infotype

    I have the problem when I am going to change a employees infotype (e.g. infotype 0001 or 0002) using transaction PA30.
    If I want to save this action, the screen appear dialog box: "prompt for customizing request."
    Has anyone experienced such a problem? If so, can you please tell me how
    did you fix it.
    Thanks in advance.
    Nils

    Hi,
    For master data maintenance no need of transport request. Ask your basis people to remove transport request option for master data maintenance. Earlier I faced the similar problem I report basis team and they removed it.

  • XI: Alerts - Step by step issue " Prompt for customizing request"

    I am going through Michal Krawczyk's blog XI: Alerts - Step by step
    Michal Krawczyk and between step 4 and step 5 I run up against an issue.  I cannot save it because I get a popup saying "Prompt for customizing request" then I click the list button and it says " You can only include objects of this type in customizing requests only" ( a little redundant I must say ) but anyway - the net result is I can't save and lose all the work I just did.
    Any help would be greatly appreciated!
    Thanks - Andrew

    Scott,
    I have replied in your another thread for this issue. I request you to please make one thread only so that it will not confuse you and the SDNers.
    ---Satish

  • Customizing tables not asking for Customizing Request while saving data

    Hi,
    I have some customizing tables in my development server (Delivery Class = 'C').
    These always used to ask for a Customizing Request whenever data was saved in them.
    Suddenly, I have noticed they are no more asking for any Customizing Request. I cross-checked in the Transport Organizer and confirmed that there are no customizing requests of mine which may be already holding any data entries of these tables.
    I wonder why this may be happening (believe it to be some basis configuration issue. also asked my basis guy but he has no clue).
    Kindly suggest.
    Thanks,
    Z

    Thanks Navneet and Gautham.
    My problem is now solved. Let me summarize the problem and the solution now.
    -> The customization tables suddenly stopped asking for a request while saving data.
        Somehow the settings had been reset, and as Gautham pointed out, it was corrected in the tcode SCC4
    -> Most of the tables now worked fine, but still few of them didnt ask for requests
        Here, I found out that the developers had chosen "no, or user, recording routine" instead of  "standard recording routine". For such tables, when i check in the tcode SE54, menu path Environment -> Maintenance Objects -> Change, I find the Transport category 'No Transport'. Regenerating the maintenance generator choosing "standard recording routine" fixes this and the tables now ask for a customizing request.
    Thanks, both, for the quick response.

  • LSMW recording SM30, prompt for customizing request

    Hi everyone,
    I'm trying to use lsmw for uploading data into a customizing table. For this I recorded the creation of an entry with transaction sm30. At the end of the recording (when saving) the prompt for a customizing request pops up. When executing the resulting batch input, it get's confused (in my opinion because of the transport request popup in the recording).
    Is there a way to prevent the popup?
    I've read in a different thread that I can create 1 entry, then do the recording for the lsmw in the same session. This sounds good to me, but I don't see how to do this.
    If anybody has an idea how to solve this, it would be great.
    Regards,
    Monika.

    Hi
    No u can't prevent that popup, because u're trying to update a customing table: you should considere two main things:
    - The call of the request popup can depend on the kind of the client, i.e how the client (dev, test or prod) is set;
    - If the cleint is closed, so the modifications are not allowed (for example in production system), your lsmw project can't works.
    Anyway by SE11 u can try to create a maitenance view table based on the database table u need to update, leave cutomizing flag and generate the maintenance program (for trx SM30) for this new view: probably now it shouldn't show the popup for the transport (but I'n not sure), if it works u can use it in your project.
    It's very hard to manage a table control in LSMW, u can't know how many recodrs u need to update and u can't change the bdc program generated for lsmw.
    In this situation the best solution is to insert only one record: i.e. for every record u need to update:
    - CALL SM30
    - Press NEW ENTRY
    - Insert the new record to the top of table control
    - Save
    - exit
    In this way your bdc program doesn't depend on the number of records, as you manage only one record, i.e your project will create a bdc session with as many transaction as many records to be inserted.
    Max

  • Prompt for Customization Request???

    Hi Geeks,
                  When I Started creating the Company Code. I got a popup screen saying that
    "Prompt for customizing Request". what does this screen exactly mean. How to overcome it.
    I do have one more question: When I started Activating the Control Area I got a message saying that
    "Critical Transport:Control Indicator in Controlling Area". Does this says that the control area is activated?
    A detail explanation is well appreciated.
    Thanks for your time
    Harsh
    Moderator: Please, avoid asking basic questions

    Hi,
    1: System asks you for a customizing request where your entries will be stored for later transportation to other SAP-systems. Maybe you have to create one.
    You can't overcome it, you can save your changes in a customizing request that is not transported but than the question is: Why are you creating a new comp. code if you don't want to transport it...
    2: The message "Critical Transport:Control Indicator in Controlling Area" means that the control indicator is changed (from non-active to active or vice versa) and such a transport can cause problems in the target system (eg you are deactivating by mistake...).
    BR Christian

  • Update  Customer's Credit Exposure amount when saving sales order

    Hi All,
    My requirement is to update the Credit Exposure amount(KNKK-SKFOR) of the Payer based on the open items for the payer when saving a sales order.
    I checked the UserExit USER_CREDIT_CHECK2 however this is not working when I am trying to update the KNKK-SKFOR value in this userexit.
    Please help.
    Thanks.

    Dear Debashish
    As per my understanding, this is because the credit limit check is always applicable at 2 levels only i.e. Sales Order and Delivery.
    u r talking about Open Billing Doc and Open Items, but this is also covered within Open Sales Orders and Deliveries, isn't it?
    Hope this will help u.

  • Problem in View Maintenance -  Prompting for a request

    Dear Experts,
    We have upgraded from 4.6c system to ECC system.  i have a table maintenance generator for a Z table. it has been transported across systems ( DEV, QA). now when i try to edit some data in that view using SM30 and saving it...
    its prompting for a request in Quality system, whereas in DEV its not asking..
    kindly help on this regard.
    thanks
    Krish

    Thanks for the reply..
    In both systems the following are the setting in SE54
    Transport is in -> Automatic transport
    Adjustment is in -> Automatic Adjustment
    any othe clues...
    Thanks
    Krish

  • Customer Recievables Ageing by Sales Employee showing No Sales Employee

    Dear Sir(s),
    We are on SAP Business One 8.81 PL04.
    The customer recievables Ageing by Sales Employee report shows "No Sales Employee". when we group by sales employee on the selection criteria.
    We have setup all our Customers with sales employees in the Business Partner Master Data.
    Please advise on what could be the cause of this.
    Kind Regards,
    Asif M.

    Hi Rahul,
    Yes, the sales employee details are captured on the invoice.
    Infact, on the "No sales employee" Group, only the Incoming Payments (Type : RC) show for the diferent customers and yet these incoming payments were paid based on the invoices which have the sales employees captured.
    The customers appear both on the "No Sales Employee" Group as negative balances as well as its correct "Sales Employee' group as positve balance. The report shows correctly when we select the group by as  "customer" in the selection criteria.
    Regards,
    Asif

  • I need a Badi that is triggered when saving Sales order in both Va01 and Va

    Hi
    I need a Badi that is triggered when saving Sales order in both Va01 and Va02
    I tried with the following BADI's
    BADI : BADI_SD_SALES
    Implementation : /BEV1/SR_SALES_ORD_1
    Method SAVE_DOCUMENT
    Now when i want to put my peice of code in this (SAVE_DOCUMENT) method.
    It is asking for Access key. Which i do not have.
    Should i create a implementation and then create a method and then put my code there?
    Anybody plz help.

    You will probably not find a BADI to suit your needs.  However if you look at include program MV45AFZZ you should find two subroutines:  USEREXIT_SAVE_DOCUMENT_PREPARE and USEREXIT_SAVE_DOCUMENT.  You can put the code you need directly into these subroutines.  If these have not been changed yet on your system, you will need an access key to make these changes.
    Please read the documentation in the header of the subroutines for furtner information on when they are called.
    Best Regards,
    Chris H.

  • I am working with Adobe 'Classroom in a book' and it's asking me for 'write access' when saving.

    I am working with Adobe 'Classroom in a book' and it's asking me for 'write access' when saving.
    How do I do that.
    I tried going to file >get info and it would not allow me to unlock.
    How do I do that?

    It sounds like the folder you are saving to does not have the proper permission for you to write to it. What OS are you using?

  • Photoshop CS4 has quit asking for quality level when 'Saving As'?

    Windows Vista 64bit  /  CS4 v11
    I had to reinstall CS4 after a hard drive failure. In the new setup,  Photoshop CS4 has quit asking for quality level when 'Saving As'? Help appreciated, IM

    ImageMan II wrote:
    Windows Vista 64bit  /  CS4 v11
    I had to reinstall CS4 after a hard drive failure. In the new setup,  Photoshop CS4 has quit asking for quality level when 'Saving As'? Help appreciated, IM
    It depends on the original format and the destination format of the file.
    PS: You should upgrade to version 11.0.1

  • Office prompts for windows login, when i'm trying to save edited document

    Hello, i'm trying to disable webdav in office 2010.
    My setup is: Apache 2.2.4 with Kerberos "mod_auth_kerb" enabled, works fine.
    So fare i have this config:
    .htaccess:
    RewriteCond %{REQUEST_METHOD} ^(OPTIONS|PROPFIND|HEAD)$ [NC]
    RewriteCond %{HTTP_USER_AGENT} ^Microsoft\ Office\ Core\ Storage\ Infrastructure.*$ [OR]
    RewriteCond %{HTTP_USER_AGENT} ^Microsoft\ Office\ Protocol\ Discovery [OR]
    RewriteCond %{HTTP_USER_AGENT} ^Microsoft\ Office\ Existence\ Discovery [OR]
    RewriteCond %{HTTP_USER_AGENT} ^Microsoft\-WebDAV\-MiniRedir.*$
    RewriteRule .* - [R=501,L]
    This config, disables the login, which came everytime i opened the document in Internet Explorer.
    But when document is opened and i want to save the document, i get a windows login prompt.
    This is my access log, which shows office tries to access the webserver, but anonymously.
    10.0.0.123 - - [22/Jan/2014:15:21:18 +0100] "OPTIONS /files/tool/ HTTP/1.1" 401 762 "-" "Microsoft Office Protocol Discovery"
    10.0.0.123 - [email protected] [22/Jan/2014:15:21:18 +0100] "OPTIONS /files/tool/ HTTP/1.1" 501 776 "-" "Microsoft Office Protocol Discovery"
    10.0.0.123 - [email protected] [22/Jan/2014:15:21:18 +0100] "OPTIONS /files/tool/ HTTP/1.1" 501 776 "-" "Microsoft Office Protocol Discovery"
    10.0.0.123 - [email protected] [22/Jan/2014:15:21:18 +0100] "OPTIONS /files/tool/ HTTP/1.1" 501 776 "-" "Microsoft Office Protocol Discovery"
    10.0.0.123 - - [22/Jan/2014:15:21:18 +0100] "HEAD /files/file.doc HTTP/1.1" 401 272 "-" "Microsoft Office Existence Discovery"
    10.0.0.123 - [email protected] [22/Jan/2014:15:21:18 +0100] "HEAD /files/file.doc HTTP/1.1" 501 447 "-" "Microsoft Office Existence Discovery"
    10.0.0.123 - [email protected] [22/Jan/2014:15:21:18 +0100] "GET /files/file.doc HTTP/1.1" 304 456 "-" "Microsoft Office Core Storage Infrastructure/1.0"
    10.0.0.123 - [email protected] [22/Jan/2014:15:21:18 +0100] "PROPFIND /files/file.doc HTTP/1.1" 501 807 "-" "Microsoft Office Core Storage Infrastructure/1.0"
    10.0.0.123 - - [22/Jan/2014:15:21:24 +0100] "OPTIONS /files/ HTTP/1.1" 401 762 "-" "Microsoft Office Protocol Discovery"
    10.0.0.123 - [email protected] [22/Jan/2014:15:21:24 +0100] "OPTIONS /files/ HTTP/1.1" 501 771 "-" "Microsoft Office Protocol Discovery"
    10.0.0.123 - - [22/Jan/2014:15:21:24 +0100] "OPTIONS / HTTP/1.1" 401 762 "-" "Microsoft-WebDAV-MiniRedir/6.1.7601"
    10.0.0.123 - - [22/Jan/2014:15:21:24 +0100] "OPTIONS / HTTP/1.1" 401 761 "-" "Microsoft-WebDAV-MiniRedir/6.1.7601"
    10.0.0.123 - - [22/Jan/2014:15:21:24 +0100] "OPTIONS / HTTP/1.1" 401 761 "-" "Microsoft-WebDAV-MiniRedir/6.1.7601"
    10.0.0.123 - - [22/Jan/2014:15:21:24 +0100] "OPTIONS / HTTP/1.1" 401 761 "-" "Microsoft-WebDAV-MiniRedir/6.1.7601"
    10.0.0.123 - - [22/Jan/2014:15:21:24 +0100] "OPTIONS / HTTP/1.1" 401 761 "-" "Microsoft-WebDAV-MiniRedir/6.1.7601"
    10.0.0.123 - - [22/Jan/2014:15:21:24 +0100] "OPTIONS / HTTP/1.1" 401 761 "-" "Microsoft-WebDAV-MiniRedir/6.1.7601"
    10.0.0.123 - - [22/Jan/2014:15:21:24 +0100] "OPTIONS / HTTP/1.1" 401 761 "-" "Microsoft-WebDAV-MiniRedir/6.1.7601"
    10.0.0.123 - - [22/Jan/2014:15:21:24 +0100] "OPTIONS / HTTP/1.1" 401 761 "-" "Microsoft-WebDAV-MiniRedir/6.1.7601"
    10.0.0.123 - - [22/Jan/2014:15:21:24 +0100] "OPTIONS / HTTP/1.1" 401 761 "-" "Microsoft-WebDAV-MiniRedir/6.1.7601"
    10.0.0.123 - - [22/Jan/2014:15:21:24 +0100] "OPTIONS / HTTP/1.1" 401 761 "-" "Microsoft-WebDAV-MiniRedir/6.1.7601"
    10.0.0.123 - - [22/Jan/2014:15:21:24 +0100] "OPTIONS / HTTP/1.1" 401 761 "-" "Microsoft-WebDAV-MiniRedir/6.1.7601"
    10.0.0.123 - - [22/Jan/2014:15:21:24 +0100] "OPTIONS / HTTP/1.1" 401 761 "-" "Microsoft-WebDAV-MiniRedir/6.1.7601"
    10.0.0.123 - - [22/Jan/2014:15:21:24 +0100] "OPTIONS / HTTP/1.1" 401 761 "-" "Microsoft-WebDAV-MiniRedir/6.1.7601"
    10.0.0.123 - - [22/Jan/2014:15:21:24 +0100] "OPTIONS / HTTP/1.1" 401 761 "-" "Microsoft-WebDAV-MiniRedir/6.1.7601"
    10.0.0.123 - - [22/Jan/2014:15:21:24 +0100] "OPTIONS / HTTP/1.1" 401 761 "-" "Microsoft-WebDAV-MiniRedir/6.1.7601"
    10.0.0.123 - - [22/Jan/2014:15:21:24 +0100] "OPTIONS / HTTP/1.1" 401 761 "-" "Microsoft-WebDAV-MiniRedir/6.1.7601"
    10.0.0.123 - - [22/Jan/2014:15:21:24 +0100] "OPTIONS / HTTP/1.1" 401 761 "-" "Microsoft-WebDAV-MiniRedir/6.1.7601"
    I have tried this "fix it tool": http://support.microsoft.com/kb/2123563
    What am i missing?
    And why is office talking to the server anonymously ?
    Jakob Olsen

    Hello,
    in addition to my question here: http://social.technet.microsoft.com/Forums/office/en-US/eb068660-5ded-411e-bfc1-6f18ba7bc585/office-prompts-for-windows-login-when-im-trying-to-save-edited-document?forum=officeitproprevious
    Can someone tell my, how does the Microsoft Office Single Sign on work ?
    From what i understand, ms office opens the document (when through IE) and tries to create a webdav connection.
    I have tried to disable the webdav on apache.
    But the entire webserver is mod_auth_kerb "protected".
    And in the access-log, i can see this:
    IP, DATETIME, [email protected] document....
    But also: IP, DATETIME - document <--- None authenticated user... Why does microsoft not use the current user?
    I have tried to ssl enable the website, which i read in this thread: http://support.microsoft.com/kb/2123563
    But Microsoft Office stills act as anonymous user.
    Jakob Olsen

  • Prompt for transport request if records are added/modified for custom table

    Hello Experts,
    A couple of questions,
    1. How do we prompt user to create a TR whenever he changes a record in my custom table
    via SM30? my custom table has a maintenance type of 'C' - customizing already.
    2. How do we transport the custom table contents to another client?
    Thank you guys and take care!

    Hello
    Regarding (1) just have a look at a standard maintenance view like V_T001W (SE11 -> menu Utilities -> Table Maintenance Generator ):
    Here you can see that the option Standard Recording Routine is chosen which is responsible for prompting for a transport request as soon as records of the table/view are changed.
    Regards
      Uwe

  • Customizing Request while Hiring an employee using PA40

    Hi All
    1.
    I am hiring an employee using Hiring Action (PA40) , once i enter the data in Infotype 0000 (Actions) & Infotype 0001 (Org Assignment) while saving it is asking for a Customizing Request .
    Pls let me know why is it asking for the request & how to avoid it .
    Thanks

    Hi
    Gagan,
    The customising request can be controlled by us. You can access the table T77S0 directly and search for group TRSP and Sem. abbr CORR. If you want to control using the navigation path from IMG>Personnel Management>Organisation Management>Transport>Setup Transport connection.
    Having X is value abbreviation column does not generate the Customising Request
    Mr Mohan had just put the same how ever.
    All the best to you
    Regards
    RR

Maybe you are looking for