Prompt for folder when sending mail

I have many subfolders in mail, where I like to store both received, and sent messages. This means I have to go through my sent messages folder and manually drag the messages to the folders.
Years ago I worked with Lotus Notes, which had a very cool feature: it prompted you after sendin a mail for the folder where it should be stored. I later switched to Outlook, and found a macro which would do just that.
Is there an add-on to Apple Mail which does the same?

Launch Mail.
Mail > Preferences > General
Under New message sound uncheck the box Play sounds for other mail actions.
Quit Mail.
Relaunch Mail, check the box Play sounds for other mail actions.
Quit and relaunch Mail.
Hope it works.

Similar Messages

Outlook 2010 prompts for profile when 3rd party application tries to send mail

Hi,
I have been having an issue with Outlook 2010 and our in-house MIS system. The system uses Outlook to send mail out, and it works perfectly fine if Outlook is running at the time.
There is a problem though when Outlook is not running and the programs calls Outlook to send the mail, Outlook will display the "Choose Profile" dialog. Outlook basically launches in the background with the little gear icon in the system tray.
Is there any way to get rid of the select profile screen? Everything is already selected appropriately under Control Panel>Mail, Outlook does not prompt for profile when launched normally.
Thanks

It all depends on the code you are using to initiate Outlook.
It might be better to ask this in the developer forum down the hall:
http://social.msdn.microsoft.com/Forums/en-US/outlookdev/threads
Don't forget to post your sample code.
Robert Sparnaaij
[MVP-Outlook]
Outlook guides and more: HowTo-Outlook.com
Outlook Quick Tips: MSOutlook.info

Spinning wheel not showing when sending mail

Hello,
I recently gave my older iMac G5/2GHz to my Mom and got her all set up - I transferred all of her documents and photos from her old original iMac G3/350 to the "new" iMac G5/2GHz. The iMac G5/2GHz has a very clean and up-to-date Mac OS X 10.4.11 on it. I used the iMac G5/2GHz right up until I got my new iMac 3.06 GHz Intel Core 2 Duo a few weeks ago.
I deleted all the prefs files and related files and folders from Mail 2.1.3 and started off with a "fresh" copy of Mail 2.1.3. I then imported all her e-mail messages, folders and addresses from her old version of Outlook Express 5.0.6. I had a few problems with the import but I got it all straightened around (she had a few mail folders named with either a colon ":" or a slash "/" in them so I got that straightened out and everything worked fine afterward).
But there's a strange problem happening with Mail 2.1.3 when she sends e-mails now. I am used to seeing the little "spinning wheel" to the right of the "Sent" mailbox when sending an e-mail to someone and the word "Sent" actually always seemed to change to "Sending" while mail was being sent but it doesn't do that anymore. The only way we can tell what's happening when sending e-mail is to open the Activity window from Mail's "Window" menu.
Has anyone else encountered this problem and is there any way you may know of to fix it so that we can see the "progress" (the "spinning wheel") of the mail being sent to the right of the "Sent" mailbox (without having to use the "Activity" window)?
All of her messages send and receive no problem but I can't, for the life of me, figure out why we can't see the progress of mail being sent out (we can see the progress spinning to the right of the Inbox when checking mail but nothing shows up when sending mail).
Thanks in advance for your help.
Gerard

Hi Gerard,
Yes it can, first I'd try this...
Right click on that Mail folder, choose archive, you'll get everything in the folder, and the folder itself in a file called Mail.zip, move it to a safe place, same for the Mail Downloads folder... only the plist is separate.
/Users/YourUserName/Library/Preferences/com.apple.mail.plist
(Deleting may or may not require you to setup your account(s) again.)
Quit Mail, then In your home folder, try moving this +folder & file+ to the Desktop then reboot...
First, Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these +folder & file+ to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.

SharePoint prompting for password when saving word document

Saving a word document back to SharePoint always prompts for credentials.
I am the administrator for a SharePoint farm. We have enabled kerberos, and added the portal to the intranet zone in Internet Explorer by group policy. Most of the time this limits the amount of password prompts our customers see (including viewing the portal
in a browser, and opening documents); however, we are still getting the prompt for credentials when trying to save a word document back to SharePoint.
Here are some details: - SharePoint 2010 - Word 2010 - Kerberos enabled - Portal added to intranet zone in IE - Checkbox for passing automatic credentials enabled
Can anyone help? Is there something I've missed? Is this prompt just unavoidable?

Hi,
Internet Explorer uses the Web Client service when you use Internet Explorer to access a
WebDAV resource. The Web Client Service uses Windows HTTP Services (WinHTTP) to perform the network I/O to the remote host. WinHTTP sends user credentials only in response to requests that occur on a local intranet site.
However, WinHTTP does not check the security zone
settings in Internet Explorer to determine whether a Web site is in a zone that lets credentials be sent automatically.
Click Start, type regedit in the Start Search box, and then press
ENTER.
Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WebClient\Parameters
On the Edit menu, point to New, and then click
Multi-String Value.
Type AuthForwardServerList, and then press ENTER.
On the Edit menu, click Modify.
In the Value data box, type the URL of the server that hosts the Web share, and then click
OK.
Note You can also type a list of URLs in the
Value data box. For more information, see the "Sample URL list" section in this article.
Exit Registry Editor.
After this registry entry is created, the WebClient service will read the entry value. If the client computer tries to access a URL that matches any of the expressions in the list, the user credential will be sent successfully to authenticate
the user, even if no proxy is configured.
Note You have to restart the WebClient service after you modify the registry.
Reference: http://support.microsoft.com/kb/943280?wa=wsignin1.0
-Ivan
Ivan Sanders My LinkedIn Profile,
My Blog,
@iasanders.

"smtp error" in webmail when sending mails

Hello,
"smtp error" in webmail when sending mails
why?

With the very little data offered, I can only give a general idea.
"smtp error" usually means that webmail isn't pointed to a smtp server for sending out mails.
Webmail normally (by default) points to the same box it's on for sending mails out. You can change the host and port with configutil.
Some versions of webmail must point to iMS, and other mail servers won't work. Since I have no idea what version you have, I can't tell if this is a problem.
Did it ever work?
What version are you using?

Dtmail on x86 crashes when sending mail

Hi,
I'm running Solaris 10 on x86 and I'm wondering if there is a fix or a workaround
for dtmail crashing when sending mail. There is an existing bug report for this
filed July 20 2006 (6346618) but I'm unable to view the bug detail since I have
not yet fully decided on a service plan. I've searched around Sunsolve and
google but nothing is coming up. I tried build 45 of Solaris Express and the
same problem is present. Does anyone have any additional information
about this? Is a fix available for serivce plan holders?
Thanks,
Pat

Thank you for looking at the bug. I do have 121488-01 installed; patch dated 12/19/2005. If a fix for this is rolled up into another patch, so far it is not available to me. As of this morning, there are no updates; dtmail still crashes on sending mail.
Searching sunsolve for this returns three bug numbers:
6346618 (dated July 20, 2006)
5091421 (dated November 4, 2005)
1187150 (dated November 16, 1995)
although the 1995 bug is probably unrelated. Looks like my best chance at working around this may be to grab the dtmail binary from Solaris 9. Thanks to all who have looked at this with me so far; I appreciate it.
Regards
Pat

Error PDF when sending mail

Dear all,
i'm facing a PDF error when sending mail, i figure that PDF attachment can't be more than 100 pages. is that correct?
below is the error message when open ADOBE, this won't happen when pages in adobe less than 100.
"Adobe Reader could not open 'NAME.PDF' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded) "
can anyone help me please.

Dear Experts
I already configured application server configuration file with specifying SMTP mail server IP in pluginParam parameter
<pluginParam name="mailServer">202.157.161.76</pluginParam>
<property name="enableSSL" value="no"/>
<property name="mailUserName" value="%[email protected]%"/>
<property name="mailPassword" value="%soyacl#123%"/>
what is the issue
Pl clarify
Please reply it's urgent

Java.lang.NumberFormatException when sending mails

Gurus,
I am using java mail 1.4 to send mails from my application and the code to do so is
    public void postMail(String recipient, String message) {
        logger.fine("in postMail method..");
        boolean debug = true;
        Properties props = new Properties();
        props.put("mail.transport.protocol", "smtp");
        props.put("mail.smtp.host", ConfigProperty.getProperty("mail.smtp.host"));
        props.put("mail.smtp.auth","true");
        props.put("mail.smtp.port", ConfigProperty.getProperty("mail.smtp.port"));
        props.put("mail.smtp.from", ConfigProperty.getProperty("mail.from"));
        Session session = Session.getDefaultInstance(props, null);
        session.setDebug(debug);
        Message msg = new MimeMessage(session);
        try {
            String from = ConfigProperty.getProperty("mail.from").trim();
            InternetAddress addressFrom = new InternetAddress(from);
            msg.setFrom(addressFrom);
            InternetAddress addressTo = new InternetAddress(recipient);
            msg.addRecipient(Message.RecipientType.TO, addressTo);
            msg.setSubject(ConfigProperty.getProperty("mail.subject"));
            msg.setContent(message, "text/plain");
            logger.info("Sending mail now...............................");
            Transport trans = session.getTransport("smtp");
            trans.connect("casarray.arg.ae",username,password);
            trans.send(msg);
        } catch (Exception e) {
            e.printStackTrace();
    }However i am getting the strange error when sending mails. My email is is very simple [email protected]
Please help me understand the issue here
java.lang.NumberFormatException: For input string: ""
     at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
     at java.lang.Integer.parseInt(Integer.java:470)
     at java.lang.Integer.parseInt(Integer.java:499)
     at com.sun.mail.smtp.SMTPTransport.protocolConnect(SMTPTransport.java:398)
     at javax.mail.Service.connect(Service.java:288)
     at javax.mail.Service.connect(Service.java:169)
     at com.roadMiles.view.util.EmailNotification.postMail(EmailNotification.java:54)
     at com.roadMiles.view.unsecure.page.bean.LoginPageBean.forgotPassword(LoginPageBean.java:180)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.sun.el.parser.AstValue.invoke(Unknown Source)
     at com.sun.el.MethodExpressionImpl.invoke(Unknown Source)
     at org.apache.myfaces.trinidad.component.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:46)
     at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:102)
     at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:190)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)
     at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:102)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)
     at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:96)
     at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475)
     at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:788)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:306)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:186)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:175)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

The error message is telling you exactly what's wrong:
java.lang.NumberFormatException: For input string: ""
at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
at java.lang.Integer.parseInt(Integer.java:470)
at java.lang.Integer.parseInt(Integer.java:499)
at com.sun.mail.smtp.SMTPTransport.protocolConnect(SMTPTransport.java:398)
at javax.mail.Service.connect(Service.java:288)
at javax.mail.Service.connect(Service.java:169)
at com.roadMiles.view.util.EmailNotification.postMail(EmailNotification.java:54)At line 54 of EmailNotification.java (which I assume is your class), you're calling connect(), but that fails, because, deeper down, it's trying to parse the empty String ("") as a number. So don't pass the empty String to connect(); pass a valid number instead.

STSNavigate() still prompting for credentials when trying to open a document

Here is my scenario. We have setup a public facing site the utilizes a Web Application that searches a internal SharePoint 2010 site. The web app utilizes the SharePoint QueryService to search the site. We provide credentials to the service as the SharePoint
site is not an anonymous site (although if the QueryService worked with the site being anonymous that would satisfy our requirements). The Web server allows anonymous access to the web app through IIS. I have found that utilizing the STSNavigate() function
SUPPOSED to allow the document to be downloaded or opened without prompting for credentials. I modified my search results link to include the function on click and low and behold it still prompts for credentials the same way it would if the url just had the
link to the file. I am on a time clock here and I am running to the end of my rope. Any suggestions?

Hi,
According to your post, my understanding is that STSNavigate() still prompt for credentials when trying to open a document.
Per my knowledge, if you try to open an Office file directly from a remote place, Office wants to know who the hell you are. If the server responses with the
Microsoft Office Protocol Discovery or a
FrontPage Protocol or a
WebDav Protocol
Then it ask you for credentials.
As a workaround, I recommend to “init.js” located in \Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\LAYOUTS\1033 folder.
You need to add this it:
STSNavigate(ctx.HttpRoot + "/_layouts/download.aspx?SourceUrl=" + o);return false;
For more information, you can refer to:
SharePoint login prompt when accessing files in a Document Library Solution
Best Regards,
Linda Li
Linda Li
TechNet Community Support

TS3274 I have all sounds turned on in settings and the volume is up but I get no click when typing, no swoosh when sending mail, etc.

Help. My sounds are turned on and volume is up but I get no keyboard click while typing and no swoosh when sending mail.

1. Double-click the Home button and swipe the Task Bar (at bottom) to the right. Check volume and mute settings.
2. Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple Logo

After updating to Mavericks MAIL no longer issues a "whoosh" sound when sending mail. Can I get it back?

After updating to Mavericks MAIL no longer issues a "whoosh" sound when sending mail. Can I get it back?

If restarting did not resolve the issue, open Mail Preferences and make sure the box next to "Play sounds for other mail actions" is checked.

Getting Prompt for Credentials When Opening InfoPath 2010 Form in Sharepoint 2010

I have a domain user who runs Office 2010 x32 and uses a Sharepoint 2010 site daily. Lately a specific page on that site has been randomly giving prompts for credentials when opening existing documents and creating new ones. The process can be most easily
replicated by opening the new document template in Infopath by going to Documents -> New in the ribbon bar of the SP page. Most of the time the Windows credentials for the user are passed to Infopath/Sharepoint automatically (which is normal), but on the
fourth or fifth attempt to create a new form, the prompt appears. The user can still enter the credentials and open the blank template form, but a prompt should not appear. The user is also the administrator for that page, so I'm thinking it's not a permissions
issue.
The user is running IE 9 on Windows 7 Pro x64. I have performed the following:
Reset advanced IE settings and all user cache data
Cleared cached Sharepoint credentials in Windows credential manager
Re-applied group policy for the machine using gpupdate /force
Logged in with a clean temporary profile
Logged in to another domain account using the user's Sharepoint credentials
Cleared Infopath cache
Re-installed Office 2010 x32
The problem only occurs only on this particular machine. There are no Sharepoint or authentication-related errors or warnings in the application and system event logs. There are also no error messages on-screen when the prompt appears. I also considered
the possibility of this being a performance related issue in the case that maybe Infopath was taking too long to start, causing the credential pass-through process to time out and fall back to a prompt. I ran disk cleanup, deleted some temporary files, and
checked for excessive CPU/memory load. I didn't find any issues and doing these things did not help.
I'm convinced there is another setting somewhere in Windows that is causing this. Interestingly it always happens after four or five attempts, never the first time. Can someone point me in the right direction?

Hi Titan, this sounds like an IE security setting issue. Things to do:
1. In Internet options>Security>Local Intranet, make sure "Enable Protected Mode" is not selected.
2. Under Sites>Advanced, add https://*.sharepoint.com (and make sure "Require server verification..." is not checked).
3. Under Security>Custom Level, scroll all the way to the bottom and make sure "Automatic logon with current user..." is checked.
cameron rautmann

Textarea problem when sending mail (only Firefox)

When sending mail using textarea item with multiple lines, carriage returns are taken away in resulting mail when sent in Firefox, but not in IE.
To send mail, I call Javascript function that gets textarea value ($v or $x.innerHTML give the same result) and calls then on-demand process that calls in turn APEX_MAIL function.
Igor

Thank you, Jari!
"pre" did the trick. Line breaks are OK now.
There is one small inconvenience, though: font becomes Courrier instead of sans-serif type. But this is less disturbing than missing line breaks.
Igor

I want to bcc myself when sending mail from one account but not another. When I check "automatically bcc myself", it bcc's me from both accounts. Can I set this to work with only one account?

I have two mail accounts on my Mac. I want one account to bcc me when I send emails from that account. I checked "automatically bcc myself" under mail>preferences>composing, but both accounts bcc me when sending mail. Can I set this to only bcc myself from one specific email account? Thanks.

It does not make sense that your ssh does not have a dash capital Y (-Y) option. It is in "man ssh", and my 10.6.6 has the -Y option, and I've had a -Y option since at least Tiger (10.4) days.
My ssh is in /usr/bin/ssh
I'm not very good at X11 issues, so I'm just throwing ideas out there.
Does your broken account have a $HOME/.ssh/config file, and if so, what is in it?
Does the broken account have any $HOME/.x* or $HOME/.X* files that X11 might be reading to configure your X11 behavior differently from the new test account?
$HOME/.Xauthority
$HOME/.Xdefaults-<hostname>
$HOME/.Xresources
$HOME/.ICEauthority
$HOME/.keymap.km
The above are a few names I found looking through "man X"
While I'm thinking about it, I assume that when going to the server, you are using the exact same user account on the server, so that you have a constant at least at that end.
Have you tried trashing your
$HOME/Library/Preferences/org.x.X11.plist
file, to see if that is affecting the broken account?
Again, I am just throwing out ideas to see if anything sticks.

Crystal Reports prompting for creds when viewed from BO 4

The environment:
Business Objects Enterprise 4, sp2 patch 8
SAP ECC 6.0, kernel 701, sup. pkg. lvl 137
This is a new BOE 4 installation on a test system. The BOE installation has been configured to use Windows AD authentication with SSO. When I run a Crystal Report that is based on SAP ECC data, I am prompted for credentials. So I used the following document to configure BOE for SSO to DB:
http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtosetupSSOagainstSAPBWinSBOBI4.0forLDAPusers
This didn't fix the problem. SAP ECC reports in BOE still prompt for creds when viewed. SAP Authentication is verifiably working, but I'm not sure if SSO to DB is working. One thing I've noticed is that when I log in to BOE using SAP authentication and view the report, I'm not prompted for creds. In BOE I added my Windows AD acct as an alias in my SAP acct, but I may have either done this incorrectly, or there may be something I need to do in addition.
question 1: Is there an easy way to verify if SSO to DB is working correctly?
question 2: In CMC --> Authentication --> SAP --> Entitlement Systems --> User Name, I'm assuming that this is an SAP user name. What roles/profiles does this account need? Should it be a dialog acct?
question 3: Our ECC system is configured to use SNC. Do I need to configure SNC in BOE for SSO to DB to work?
question 4: I added my Windows AD user as an alias on my SAP user record. I'm not sure this is correct... can someone verify?
Any help or suggestions are much appreciated.

Thanks, Ingo. Once I got snc configured, everything began working wonderfully.
I used this document as a guide:
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3134343630363726

Prompt for folder when sending mail

Similar Messages

Maybe you are looking for