Prompt on Put when Previewing

I want Dreamweaver to prompt me before putting the file to
the testing server when I use the preview in browser function. I'm
sure this was the case before, but now it automatically publishes
to the testing server whenever I preview. This is a problem,
because I want to preview my local files in the browser BEFORE
deciding whether or not to publish to my testing server for
approval by my manager.
Can someone tell me how I can enable this prompt?
Cheers,
Laila

Sounds like your site is not properly defined. You are
referring to a
testing server as if you are using it as a staging server.
That's not
optimal.
A testing server is really only needed if you are creating
pages that
contain server scripting (e.g.,
ASP/ASP.Net/PHP/ColdFusion/etc.). Do yours?
If not then you should operate this way -
Create TWO sites -
SITE 1 - use for approval and editing only -
Local site -> Your computer's hard drive
Remote site -> What you have called the 'testing server'
SITE 2 - use for publishing approved pages -
Local site -> Your computer's hard drive
Remote site -> Your production server
The only way a file can get from your hard drive to either
remote server
would be if you explicitly PUT it there. Would that work?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"lbriquet" <[email protected]> wrote in
message
news:fnn46c$nv6$[email protected]..
>I want Dreamweaver to prompt me before putting the file
to the testing
>server
> when I use the preview in browser function. I'm sure
this was the case
> before,
> but now it automatically publishes to the testing server
whenever I
> preview.
> This is a problem, because I want to preview my local
files in the browser
> BEFORE deciding whether or not to publish to my testing
server for
> approval by
> my manager.
> Can someone tell me how I can enable this prompt?
> Cheers,
> Laila
>

Similar Messages

HT204053 Seems my iCloud password is not the same as my iTunes. Where do I go to reset my iCloud password? I cannot access anything when prompted to put in my iCloud password because I do NOT KNOW it. Thanks!

Seems my iCloud password is not the same as my iTunes. Where do I go to reset my iCloud password? I cannot access anything when prompted to put in my iCloud password because I do NOT know it. Thanks! I've used my iTunes password for everything else Apple does and would like to use the same one for my iCloud.

Do the following:
Make sure you are signed into iMessage and FaceTime with your current ID. If they are signed into the old ID, go to Settings>Messages>Send & Receive and Settings>FaceTime, tap the ID, sign out, then sign back in with your current ID.
Then temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. (You should not have to verify the old email account so it doesn’t matter if you no longer have access to it.) Now go to Settings>iCloud, turn off Find My iDevice and enter your current password when prompted (even though it prompts you for the password for your old ID). Then go to Settings>iCloud, tap Sign Out (or Delete Account if you are not running iOS 8) and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address back to the way it was. Now you can go to Settings>iCloud and sign back in with your current iCloud ID and password (your data will download back to your device).

When i try to use my apple acocunt for the first time i get a prompt to put in my CC info but after i agree to the TOS the ipad only displays a black box no text, ive erased the ipad and still the same thing

When i try to use my apple acocunt for the first time i get a prompt to put in my CC info but after i agree to the TOS the ipad only displays a black box no text, ive erased the ipad and still the same thing

1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

Reports with prompting stop working when moved from Crystal10 to crystal 11

Issue:
We are having trouble with Crystal Reports XI. It appears that the Crystal 10 runtime included the ability to process reports that used prompting. If we run the same report with the Crystal XI runtime, it fails.
I can send a sample of the report.
Error Dialog:
Title: Internet Explorer Script Error
Error Details:
An error has occurred in the script on this page
Line: 1
Char: 1
Error: invalid character
Code: 0
URL: file: /// C:/Program%20Files/Business%20Objects/3.0/crystalreportsviewers11/prompting/js/promptengine_strings_en.js
Do you want to continue running scripts on this page?
Yes/No
Our Configuration:
We use Merge Modules that install Crystal Reports through the browser via a CAB file that we created. It runs a setup executable
The setup executable project that installs CR XI uses the following Merge Modules:
CrystalReports11_RDC_Reportengine.msm
CrystalReports11_RDC_Runtime.msm
CrystalReports11_HotFix_Merge.msm (This is contrived by us from one of your hot fixes)
Observation:
When the install is finished, the folder structure under u2026. Crystalviewers11/prompting do not have any files like they do if we install the development environment.
Question:
What do we need to do to correct this situation?
*why the reports with*
*prompting stops working when it is moved from a Crystal 10 to Crystal 11*
*environment. I believe that it has something to do with Merge Modules*
*because the files under the prompting folder do not populate with the*
*merge module like they do with the full install of Crystal Reports.*
Please help.
Best Regards,
Peter Freeman
Edited by: Vivek Kumar Sharma on May 19, 2009 3:43 PM

We have JDK 1.6 installed. The License Merge Module is not related to
this issue.
The files under \Program Files\Common Files\Business
Objects\3.0\crystalreportviewers11\prompting are not being installed.
If we copy files, into this folder structure the reports work.
One of the Business Object's Merge Modules should install the files
there rather than just an empty folder structure.
I got was able to figure out how to enter a customer support message.
They said that they could not support us because we were not on CRXIR2
(Crystal Reports 11 Release 2).
I found a download for CRXIR2SP4 (same thing service pack 4).
I installed it the Merge Module names changed to include a "_5"
Was:
CrystalReports11_RDC_Reportengine.msm
CrystalReports11_RDC_Runtime.msm
CrystalReports11_HotFix_Merge.msm (This is contrived by us from one of
your hot fixes)
Now:
CrystalReports11_5_RDC_Reportengine.msm
CrystalReports11_5_RDC_Runtime.msm
CrystalReports11_5_RDC_License.msm (should have been included)
*CrystalReports11_HotFix_Merge.msm (not needed anymore)
I will try to put a installer together with these. If this work there
will be some complexity around uninstalling the old one and installing
the new one.

10.5 - Finder crashes when previewing jpgs created in photoshop

Finder crashes when previewing jpgs created in photoshop. It seems to be associated with the preview. The finder crashes whether it is in cover flow or column view.
The only workaround I could find:
Switch finder to list view. Open the jpg (again) in photoshop, select all and copy. Create an new doc of the same size and paste. Save as jpg. Don't ask me why but it will then preview correctly in both cover flow view and column view.
It's a pain to open and re-save... anyone else having issues with jpgs? or know of a quicker workaround?

This is definitely a common problem.
I discovered this after saving some artwork from illustrator as a PDF. Opening it in Photoshop (to get the bleeds), and then saving out as a CMYK colourspace JPG. I tried a dozen times to attach it to an email to my client, but it kept springing back, and would not attach to a mail message no matter what I tried.
It also crashes finder/preview, and quickview, and safari when trying to look at it. If I copy the flattened artwork into a new PS document and save it out as a JPG then it's fine.
Worse - I understand that if you put one of these files in the downloads stack, then it will continually crash your dock. Nice!
This points towards some meta data problem/incompatibility between with the JPG files coming from adobe and apple's apps...
This is TOTALLY embarrassing as my PC has no problems at all with either JPG...
As someone who switched to Mac for professional reasons after several years of PC use, I cannot believe how slow apple and adobe have been to sort out such a fundamental problem.
Come on guys - less time ponsing about with iPods - remember the media industry who put you here.
Personally I'm hanging on to Leopard by my fingernails - and am so close to saying sod it, and going back to Tiger.

When previewing images by clicking on the thumbnail in an Event for example, I've been finding that many images preview in a 'zoomed in' way so only a small part of the photos is previewed in a highly magnified view.

When previewing images by clicking on the thumbnail in an Event for example, I've been finding that many images preview in a 'zoomed in' way so only a small part of the photos is previewed in a highly magnified view.
Initially I could find no cause. Then I tried right click - Edit and on the affected images, always get this warning:
"Image Cannot Be Edited - This photo was previously edited with another application or with an early version of Iphoto. Duplicate this photo to edit it." and a "Duplicate To Edit" Button is displayed.
The external Editor defined for iPhoto is Adobe Photoshop Elements.
Now, I reckon the MUST be others out there affected by this same apparent Preview bug, yet my searches have not revealed any answers. Also seems impossible to find a contact number for adobe???
Thanks

Start '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Firefox in Safe Mode]''' {web Link} by holding down the '''<Shift ''(Mac Options)'' >''' key, and then starting Firefox. Is the problem still there?

When previewing my website in Dreamweaver flash crashed - I need to change the security settings but don't know how to do this

I use Dreamweaver and Adobe Bridge to create slide shows on my website. When 'previewing' the slideshow - in Dreamweaver it opens Firefox - it crashed and the dialogue box opens telling me to change my 'settings' - it doesn't do this if I preview in IE - which I don't understand. I need help in knowing where to go to change the security settings so that this doesn't happen. Incidentally, when I am on the web through Firefox, my website slideshows work perfectly>

You can set the pref dom.ipc.plugins.timeoutSecs to to -1 on the about:config page to disable the timeout.
See also http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page.

Getting Prompt for Credentials When Opening InfoPath 2010 Form in Sharepoint 2010

I have a domain user who runs Office 2010 x32 and uses a Sharepoint 2010 site daily. Lately a specific page on that site has been randomly giving prompts for credentials when opening existing documents and creating new ones. The process can be most easily
replicated by opening the new document template in Infopath by going to Documents -> New in the ribbon bar of the SP page. Most of the time the Windows credentials for the user are passed to Infopath/Sharepoint automatically (which is normal), but on the
fourth or fifth attempt to create a new form, the prompt appears. The user can still enter the credentials and open the blank template form, but a prompt should not appear. The user is also the administrator for that page, so I'm thinking it's not a permissions
issue.
The user is running IE 9 on Windows 7 Pro x64. I have performed the following:
Reset advanced IE settings and all user cache data
Cleared cached Sharepoint credentials in Windows credential manager
Re-applied group policy for the machine using gpupdate /force
Logged in with a clean temporary profile
Logged in to another domain account using the user's Sharepoint credentials
Cleared Infopath cache
Re-installed Office 2010 x32
The problem only occurs only on this particular machine. There are no Sharepoint or authentication-related errors or warnings in the application and system event logs. There are also no error messages on-screen when the prompt appears. I also considered
the possibility of this being a performance related issue in the case that maybe Infopath was taking too long to start, causing the credential pass-through process to time out and fall back to a prompt. I ran disk cleanup, deleted some temporary files, and
checked for excessive CPU/memory load. I didn't find any issues and doing these things did not help.
I'm convinced there is another setting somewhere in Windows that is causing this. Interestingly it always happens after four or five attempts, never the first time. Can someone point me in the right direction?

Hi Titan, this sounds like an IE security setting issue. Things to do:
1. In Internet options>Security>Local Intranet, make sure "Enable Protected Mode" is not selected.
2. Under Sites>Advanced, add https://*.sharepoint.com (and make sure "Require server verification..." is not checked).
3. Under Security>Custom Level, scroll all the way to the bottom and make sure "Automatic logon with current user..." is checked.
cameron rautmann

Anyone having a problem with iMovie in Mavericks v 10.9.3 ? when previewing the a slideshow the colors all disappear after the first image.

Anyone having a problem with iDVD in Mavericks 10.9.3? When previewing a slideshow all color is lost after the first image.

Is your problem with iMovie as the title suggests or with iDVD?

Error message when previewing RTF report

Using BI Publisher (10.1.3.3.0 Build 108) Building a simple template using the following XML file - shown is just a snippet of the total XML file.
<employee>
<employee_id>103</employee_id>
<first_name>Alexander</first_name>
<last_name>Hunold</last_name>
<salary>9000</salary>
</employee>
Have built the following template in WORD 2003
<?for-each:Employee?>
first_name
salary
<?end for-each?>
When preview in rtf only thing I am getting is an error window that pops up and simply displays the word Error with NO error message whatsoever!
Please let me know what is going on and how to use this 'tool'
Thanks - Casey

Gentlemen - the problem has been found and resolved. Seems like the XML Data Source cannot contain a reference to a validating DTD. Once the following reference was removed AND I used employee instead of Employee in the template all worked.
<!DOCTYPE employees SYSTEM "employees.dtd">
I assume this is correct - not being able to contain a DTD reference? I will also, tomorrow (read that as probably Monday) be trying the same thing using XML Schema vaildation.
THANKS for the help - Casey

HT4061 so i got my phone wet but openned it maade shr it was dry put when i turn it on it just shows the cord and a itunes sigin

plz help i am far from home and this phone is me maps and love ones and life realy so in was on the beach and fell a sleep woke up to tide phone got wet and dryed it put when i turn it on it give me the power calbe and a itunes

Expanding on what TheDave said, it's in Recovery Mode. You can try this to get it out of Recovery Mode:
Unplug the device from the USB cable if it's connected. Then hold down the sleep/wake button until it turns off. Let go of the button and then hold it down again until the Apple logo reappears. Let it go and the device may boot up.
This only works, of course, if your device was working properly previously. Otherwise, or if that doesn't get it back to normal operation, you'll need to to try to restore it:
http://support.apple.com/kb/HT1808
If it won't restore, or if after the restore the iPhone misbehaves, then as Dave indicated it's suffered hardware damage and will need to be taken or sent to Apple. Even if it works now, it's very likely that it will fail in the future as the salt corrodes the device, so getting it replaced now is probably a wise idea since as it is you can't trust it.
Regards.

"Speed bump" problem: when previewing on the iPad, the first page of each new chapter or section sticks and loads slowly. How can I fix it?

I am building a book with text and photographs in iBooks Author, basing the design on my publisher's layout for the hard copy version. Whenever I introduce a new section or chapter, I hit a "speed bump" when previewing on the iPad. As you read, the first page of the new chapter or section is very hard to turn and sticks as it loads. Within each section the pages flow very easily, but when you reach the next section you hit another speed bump. I have experimented with many possible solutions to no avail. It does not seem to matter whether the new section has images or just text; the speed bump occurs regardless.

Joel Pickford wrote:
However, I am finding that using fewer sections with more content in them minimizes the problem (i.e. fewer section-transions means fewer speed bumps). This is contarary to the support page's suggestion of keeping chapters and sections smaller. I am not having any problem within each section, even with lots of full page photos.
That recommendation was made, presumably, to reduce the length of the delay for each chapter. More content in the chapter means more delay when changing chapters. Of course, if you have lots of little chapters, the delay can still be annoying because, even if only four or five pages in a chapter, the delay is still noticable. Just pick something that works for your book and don't worry too much about the delay. Your readers will be familiar with it if they've seen more than one IBA book.
Will the choice of color space, s-rgb or Adobe rgb 1998, affect file size?
Should I try to compress them more- say, level 5 or level 4 in Save For Web?
Should I size the images for the iPad 2 instead of the iPad 3 retina display, since there are more 2s out there?
Which color space you use does not affect file size. Apple recommend to use sRGB, so I would stick with that. As to compression and sizing, only you can decide. Try and borrow an iPad 2 to make a judgement at what level of compression and resolution you think the images start too look bad. Your high-rez images for the new iPad will be down-sampled for display on the older models, which will introduce additional artifacts.
For my book, I simply used images at 1024 x 768 resolution. When viewed on a new iPad, they look just fine. The lower resolution is basically unnoticeable (at least for my purposes). You can view a sample of my book here: "Djembe Construction: A Comprehensive Guide". If you think the images there are good enough for your purposes, you could down-size your images to half their resolution, which will reduce file size about around a factor of three.
Michi.

Crystal Reports prompting for creds when viewed from BO 4

The environment:
Business Objects Enterprise 4, sp2 patch 8
SAP ECC 6.0, kernel 701, sup. pkg. lvl 137
This is a new BOE 4 installation on a test system. The BOE installation has been configured to use Windows AD authentication with SSO. When I run a Crystal Report that is based on SAP ECC data, I am prompted for credentials. So I used the following document to configure BOE for SSO to DB:
http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtosetupSSOagainstSAPBWinSBOBI4.0forLDAPusers
This didn't fix the problem. SAP ECC reports in BOE still prompt for creds when viewed. SAP Authentication is verifiably working, but I'm not sure if SSO to DB is working. One thing I've noticed is that when I log in to BOE using SAP authentication and view the report, I'm not prompted for creds. In BOE I added my Windows AD acct as an alias in my SAP acct, but I may have either done this incorrectly, or there may be something I need to do in addition.
question 1: Is there an easy way to verify if SSO to DB is working correctly?
question 2: In CMC --> Authentication --> SAP --> Entitlement Systems --> User Name, I'm assuming that this is an SAP user name. What roles/profiles does this account need? Should it be a dialog acct?
question 3: Our ECC system is configured to use SNC. Do I need to configure SNC in BOE for SSO to DB to work?
question 4: I added my Windows AD user as an alias on my SAP user record. I'm not sure this is correct... can someone verify?
Any help or suggestions are much appreciated.

Thanks, Ingo. Once I got snc configured, everything began working wonderfully.
I used this document as a guide:
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3134343630363726

Run time prompts not appearing when launching BR from a right click menu

Hi!
I have a problem when trying to launch a business rule from a right click menu which is assigned to a dataform.
The rule launches but does not show/ask for the run time prompts as it should do. The run-time prompts should not be hidden (I checked also Eas and data form selections).
When using the rule form the Tools-Business Rules menu, the rule works fine. It prompts for the required variables and as they are filled in, the rule does what it is expected to.
Also, when using the same rule attached into a form (and selected "use members on form"&"run on save") the rule works correctly.
We are using version 11.1.2.1.
I already have tried restarting Planning services but without success.
What might cause this?
kind regards,
user637777

Hi!
I found out from the Oracle knowledge base:
This issue is caused by unpublished Bug 11064867 - RIGHT CLICK MENUS NOT RENDERING RUN TIME PROMPTS
In version 931 run time prompts worked correctly when launching them from a right click menu, I checked this out.
In our current version I got this working (this is kind of a workaround) by adding a new RTP variable (using the same dimension as the original RTP variable). This way I got the rule to "ask for more information" (like what were you asking for? ) and not running the rule without interruptions. This instruction was given in Oracle support (knowledge base).
kind regards,
user637777

Audition 6 Crashen when previewing or applying effects

Hi
I recently installed the Creative Suite Master Collection CS6 Windows version of my new Retina MacBook pro (new 13" model) and I'm having a few problems with Audition. The main problem is that when applying effects (like a FFT filter or Stretch and pitch) Audition would crash when trying to either preview the effect or apply it.
One example is when trying to change the pitch of an audio file. Normally I use “Audition” as the algorithm rather than iZotope. Audition would crash when previewing the effect or when trying to add it. It doesn’t crash when using the iZotope algorithm. It also happens if I try to apply reverb effects too.
This Macbook Pro I’m using is running Windows 7 Pro x64 via Bootcamp. I don’t have a lot installed on it atm & both windows & the master collection are fully activated. I had an older Macbook that never had this problem before. I’ve also tried Audition from CS5.5 on Mac OS X & it doesn’t have this sort of problem.
These are the errors that show up acording to System info.
21/11/2013 11:37 PM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0xe38
Faulting application start time: 0x01cee7126c7bcb50
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: d7646e70-5305-11e3-b2ec-b8e8562f706d
21/11/2013 11:15 PM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x12b4
Faulting application start time: 0x01cee70f7f3697c8
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: cbcd68a9-5302-11e3-b2ec-b8e8562f706d
21/11/2013 11:12 PM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x4b8
Faulting application start time: 0x01cee70f04570245
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 561403a2-5302-11e3-b2ec-b8e8562f706d
21/11/2013 11:10 PM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0xe6c
Faulting application start time: 0x01cee70ec8477f12
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 10929c0c-5302-11e3-b2ec-b8e8562f706d
21/11/2013 11:06 PM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x658
Faulting application start time: 0x01cee70e4b5727b1
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 9236f4ba-5301-11e3-b2ec-b8e8562f706d
21/11/2013 11:04 PM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0xa8c
Faulting application start time: 0x01cee70dccc70c7b
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 4257ff4b-5301-11e3-b2ec-b8e8562f706d
20/11/2013 11:06 PM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x820
Faulting application start time: 0x01cee645220cb493
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 744a4280-5238-11e3-b707-b8e8562f706d
20/11/2013 11:58 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0xd9000001
Faulting process id: 0x760
Faulting application start time: 0x01cee5e7d393c02e
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 1c32aef1-51db-11e3-9a73-10ddb1d3a475
20/11/2013 10:21 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.0.708, time stamp: 0x4f70c4f6
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0xb14
Faulting application start time: 0x01cee5da3fe7841d
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 952a0ad5-51cd-11e3-8ec8-b8e8562f706d
20/11/2013 8:15 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x85c
Faulting application start time: 0x01cee5c8a7034e04
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: fc3e6fae-51bb-11e3-a467-10ddb1d3a475
20/11/2013 8:02 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x71c
Faulting application start time: 0x01cee5c6b5872308
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 1b3c52ed-51ba-11e3-8f54-b8e8562f706d
20/11/2013 7:56 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0xd9000001
Faulting process id: 0xdd4
Faulting application start time: 0x01cee5c5b4d6e335
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 38bf67dd-51b9-11e3-8f54-b8e8562f706d
20/11/2013 7:53 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x45ef2b00
Faulting process id: 0xfb8
Faulting application start time: 0x01cee5c5994aed2a
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: e41b8eed-51b8-11e3-8f54-b8e8562f706d
20/11/2013 5:23 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x11f4
Faulting application start time: 0x01cee5b0a915ab6d
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: f2af723e-51a3-11e3-b13b-b8e8562f706d
20/11/2013 4:31 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x10d8
Faulting application start time: 0x01cee5a7a7709775
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 9c86583e-519c-11e3-a64a-b8e8562f706d
20/11/2013 4:15 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x1390
Faulting application start time: 0x01cee5a6f5c8b771
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 589c80cd-519a-11e3-a64a-b8e8562f706d
20/11/2013 4:13 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x57c
Faulting application start time: 0x01cee5a6dc71a5dd
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 2803eecc-519a-11e3-a64a-b8e8562f706d
20/11/2013 4:13 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0xc14
Faulting application start time: 0x01cee5a680b2c167
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 12d672bd-519a-11e3-a64a-b8e8562f706d
Heres what shows up on my Audition log.txt file
Log file created: 22/11/2013 10:14:59 AM
Ticks = 0 <2912> <AuLog.Startup> <5> Application: Audition
Ticks = 0 <2912> <AuLog.Startup> <5> Version 5.0.2
Ticks = 0 <2912> <AuLog.Startup> <5> Build: 7
Ticks = 78 <2912> <AuLog.Startup> <5> AuUI initialization sequence started...
Ticks = 78 <2912> <AuLog.Startup> <5> Initializing Crash Recovery
Ticks = 78 <2912> <AuLog.Startup> <5> Previous Crash Detected!!!
Ticks = 2044 <2912> <AuLog.Startup> <5> Initializing AuDSP
Ticks = 2044 <2912> <AuLog.Startup> <5> Initializing AuBackEnd
Ticks = 2138 <2912> <AuLog.Startup> <5> Initializing AuApplication
Ticks = 2247 <2912> <AuLog.Startup> <5> AuApplication initialization sequence started...
Ticks = 2247 <2912> <AuLog.Startup> <5> Initializing XML Loader
Ticks = 2262 <2912> <AuLog.Startup> <5> Initializing Application Settings
Ticks = 2262 <2912> <AuLog.Startup> <5> Intializing dva unit test and console
Ticks = 2262 <2912> <AuLog.Startup> <5> Initializing Audio Device
Ticks = 2325 <2912> <AuLog.Startup> <5> Initializing XMP System
Ticks = 2340 <2912> <AuLog.Startup> <5> Initializing AMIO Host
Ticks = 2340 <2912> <AuLog.Startup> <5> AMIO Host initialization sequence started...
Ticks = 2340 <2912> <AuLog.Plug-in> <5> Skipping AMIO plug-in: AmioAiff
Ticks = 2340 <2912> <AuLog.Plug-in> <5> Skipping AMIO plug-in: AmioApe
Ticks = 2340 <2912> <AuLog.Plug-in> <5> Skipping AMIO plug-in: AmioLSF
Ticks = 2340 <2912> <AuLog.Plug-in> <5> Skipping AMIO plug-in: AmioMp2
Ticks = 2340 <2912> <AuLog.Plug-in> <5> Skipping AMIO plug-in: AmioMp3
Ticks = 2340 <2912> <AuLog.Plug-in> <5> Skipping AMIO plug-in: AmioQT
Ticks = 2340 <2912> <AuLog.Plug-in> <5> Skipping AMIO plug-in: AmioWav
Ticks = 2340 <2912> <AuLog.Startup> <5> AMIO Host initialization sequence complete.
Ticks = 2340 <2912> <AuLog.Startup> <5> Session Host initialization sequence started...
Ticks = 2340 <2912> <AuLog.Plug-in> <5> Skipping Session plug-in: FinalCutXML
Ticks = 2340 <2912> <AuLog.Plug-in> <5> Skipping Session plug-in: LegacyXML
Ticks = 2340 <2912> <AuLog.Plug-in> <5> Skipping Session plug-in: OmfSession
Ticks = 2340 <2912> <AuLog.Plug-in> <5> Skipping Session plug-in: PremiereProInterchange
Ticks = 2340 <2912> <AuLog.Plug-in> <5> Skipping Session plug-in: SesxNative
Ticks = 2340 <2912> <AuLog.Startup> <5> Session Host initialization sequence complete.
Ticks = 2340 <2912> <AuLog.Startup> <5> Initializing Clipboard Manager
Ticks = 2340 <2912> <AuLog.Startup> <5> Initializing Preset Manager
Ticks = 2372 <2912> <AuLog.Startup> <5> Initializing Favorites Manager
Ticks = 2372 <2912> <AuLog.Startup> <5> AuApplication initialization sequence complete.
Ticks = 2372 <2912> <AuLog.Startup> <5> Initializing AsyncQueueManager
Ticks = 2372 <2912> <AuLog.Startup> <5> Initializing AuUI
Ticks = 2403 <2912> <AuLog.Startup> <5> Setting up temp directories
Ticks = 2528 <2912> <AuLog.Startup> <5> AuUI initialization sequence complete.
Ticks = 2652 <2912> <AuLog.DisplaySurface> <5> Initialize PRM
Ticks = 2652 <2912> <AuLog.DisplaySurface> <5> Initialize DS
Ticks = 2652 <2912> <DynamicLink> <5> Attempting to launch dynamiclinkManager
Ticks = 2652 <2912> <DynamicLink> <5> C:\Program Files (x86)\Adobe\Adobe Audition CS6\dynamiclinkmanager.exe
Ticks = 2746 <2912> <AuLog.DisplaySurface> <5> DS Initialize succeeded
Ticks = 2746 <2912> <AuLog.DisplaySurface> <5> Video Panel is using the Display Surface
Ticks = 2918 <2912> <AuLog.Startup> <5> Initializing AuScripting
Ticks = 13214 <2912> <AuLog.Plug-in> <5> Loading AMIO plug-in: AmioWav
Ticks = 13229 <2912> <AuLog.Plug-in> <5> Audition Wave Amio plug-in. ID: 60df8553-00c8-4fd7-8a07-6f25e30ab79c
Ticks = 17332 <2912> <AdamEveAudioComponentEditorView::SyncParameters> <5> (from component) parameter out of range: index = 19, value = -0.251256
And here are some quick specs acording to System info
Item Value
OS Name Microsoft Windows 7 Professional
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name CHRISNEWMBOOK
System Manufacturer Apple Inc.
System Model MacBookPro11,3
System Type x64-based PC
Processor Intel(R) Core(TM) i7-4850HQ CPU @ 2.30GHz, 2301 Mhz, 4 Core(s), 8 Logical Processor(s)
BIOS Version/Date Apple Inc. MBP112.88Z.0138.B02.1310181745, 18/10/2013
SMBIOS Version 2.4
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume4
Locale Australia
Hardware Abstraction Layer Version = "6.1.7601.17514"
User Name ChrisNewMBook\Chris New MBook
Time Zone AUS Eastern Daylight Time
Installed Physical Memory (RAM) 16.0 GB
Total Physical Memory 15.9 GB
Available Physical Memory 13.5 GB
Total Virtual Memory 31.8 GB
Available Virtual Memory 29.3 GB
Page File Space 15.9 GB
Page File C:\pagefile.sys
The sound hardware found on this Macbook is a Cirrus Logic CS4208 (AB 94). Atm I'm using the stock drivers included with Bootcamp. Also, both Windows & adobe software are all up to date.
Can you please help me out?
Thank you

Because my main computer is a PC with CS6 & i'm usiing my macbook as a secondery PC. Yes I could use the mac version but all my projects are done on CS6 while I have CS 5.5 on the mac partition. Plus I'm not interested in updaing to CS6 for mac (if it's possible since ny CS5.5 is an upgrade from CS5).
Anyway I just want some help fixing up Audition for windows.

Prompt on Put when Previewing

Similar Messages

Maybe you are looking for