@prompt used as part of Access Restriction

We are struggling with implementing this, and wanted to check to see if this we can accomplish this. We need to use an @prompt as part of an access restriction applied to the everyone group in order to force all users to select Group A, B or C at run time. We've added the prompt into an access restriction, but we cannot get the query to finish processing. Does anyone have a thought about this?

Tony,
If you are using BOE XI 3.x, I suggest you create a predefined filter that includes the prompt definition in the universe and set it as "Compulsory applied on universe".
Thus will prompt any user to answer to the prompt you will define in this predefined filter.
Hope this helps.
Didier

Similar Messages

Access Restrictions bug of firmware 1.01.1 for WRT54G V5 V6

I am using WRT54G V5.
The Access Restrictions function won't work properly when using firmwares 1.01.1 and 1.01.0. Ports can't be blocked by using the "Blocked Services" in this function.
Now I have to switch back to 1.00.9 to make the port blocking work, but there is a DHCP server issue which could only be fixed in 1.01.0 or above.... Could someone fix this BIG BUG and roll out a new firmware????
Thanks a bunch.
Message Edited by Dennis_Hsu on 01-08-200705:02 PM

What is your Fragmentation and RTS threshold value? I'm not sure if I'm reading your message right, but it says as far as I can understand 30. The value should be 2304 instead for both.
Ty changing the wireless channel also to either 1, 6 or 11.

WRT54GS Internet Access Restriction Policies

I am finding it challenging to correctly define Internet Access Restriction
policies on my Linksys WRT54GSv4 wireless router. Documentation does not
describe multiple policies being enabled. I think that multiple policies
should be from most restrictive to least, but I am not sure.
I wish to deny Internet access from my child's WII and PSP from 10:30 PM to
6:30 AM. Also, I want to filter all hosts for blocked words and blocked
sites.
Currently, I have three policies:
1) Child_Evening --
WII and PSP MAC Filter
10:30 PM to 11:55 PM
Deny
2) Child_Night --
WII and PSP MAC Filter
12:00 AM to 6:30 AM
Deny
3) SiteWord --
IP Range 192.168.1.2 - 254
Block Various Sites
Block Various Words
I would like input as to the correct use of multiple Internet Access
Restriction policies

create an Internet Access Policy:1. Internet access Policy - 1
2. Enable.
3. Child Access(Name of the policy)
4. Deny range 192.169.1.252
5. 10:30 PM to 11:55 PM - Everyday
6. Blocked Services - All
7. Port Range Start - 1 ; End - 61000
8.Save Settings
9.Rebooting....
You deny all access through by all services to any sites.
Create the same policy with different number and name to deny access from 12:00 AM to 6:300 AM..
Url Filtering Policy to deny adult sites, they're too much with different url address.You can deny most of them,but not all.
Good Luck!!!!!
Message Edited by gochev_george on 03-16-200702:47 AM
Message Edited by gochev_george on 03-16-200702:54 AM
Thanks
Kind Regards
ing.George Gochev
DSL and Telecommunications Engineer

WRT54G2 and WRT54G locks-up (freezes) when blocking web sites using Access Restrictions

I am convinced that a few Linksys routers such as WRT54G2 and WRT54G have a major issue when blocking web sites using Access Restrictions (Internet Access Policy). After a few hours of internet access by 15 wired users the Linksys locks-up and blocks all internet web access. The only solution is to restart the power on the router.
We are currently using a Linksys WRT54G2 v1 (firmware 1.0.04). We upgraded the WRT54G2 v1 firmware to the latest 1.0.04 version which did not resolve the issue. NOTE: We were previosuly using a a Linksys WRT54G v1.1 (firmware 4.21.1) until the power supply blew a week after we started blocking web sites using Access Restrictions (Internet Access Policy).
Basically, we have a T1 internet connection and a hub connected to the Linksys router. We are trying to block several web sites such as facebook, myspace, etc. for 15 wired users. We do not use wireless connections.
This is the 2nd time it happened with 2 different models.
Please help ASAP.
Thank you,
Lance
(Mod note: Edited post. Some parts off topic.. Thanks!)

Also, you have already upgrade/re-flash the firmware of your Linksys Router you need to reset and reconfigure your router from scratch. Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

Create access restriction in designer using script

Hello,
I am looking for a way to automate the creation of access restriction within universe.
I looked in the API universe reference and it seems that there is no entries for such an object
For information I use Business Objects XIR2 with SP3
Thanks for any help or answer

Creation/Modification of Universe Access Restrictions is not part of the Universe Designer SDK, but part of the BusinessObjects Enterprise SDK.
It requires sending requests to the CMS using the SDK to get User and UserGroup information.
For the COM-based version of the Enterprise SDK, the object is known as Overload, and described here:
[http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/en/BOE_SDK/boesdk_com_doc/doc/boesdk_com_doc/CrystalEnterpriseOverloadPluginLibrary.html#1351377]
Sincerely,
Ted Ueda

Prompt @ Universe - Access restrictions

Hi all,
Can we apply the Access restriction for Universe level prompts?
Requirement :have 2 prompts at Universe level based on user i need to restrict any one of the prompt at report level
Best regards,
reddeppa k

Hello,
If I understood you clearly what you want is if you have two filters defined at universe level e.g. Filter1 & Filter2 so you want user1 to see Filter1 and User2 to see Filter2.
You will not be able to restrict filter like this but you can: -
1. Create a new object with same definition as per your filter and then using "Manage access restriction" set restriction for these objects.
2. If you have these user accounts in DB, you can use @variable ('BOUSER') in your where clause and direclty restrict the data fetched from database.
Thanks,
Vivek

"access restrictions" did not work sometimes when using 3-tier DeskI.

My customer found that "access restrictions" did not work sometimes when using 3-tier DeskI.
But this issue can be solved by logging on from another machine, or restarting the DeskI.
For I can reproduce this issue, so I just want to know that:
1.What is it probably related to?
2.If this issue happens again, what can I suggest my customer for tracking it?
For example, get some log files from servers etc.
Thanks!

Hi Sarah,
Also you can try the following solution.
1. Import the universe.
2. Go to manage access restrictions
3. Remove the restriction .
4. Again create the rescrition and unchecked the " limit size of result set to"
5. Now assign it to the unlimited results group ( this is the name of
the group we have given to those users who should be able to retrieve
more than X rows)
6. Now we save the universe. (Dont export the universe).
I hope this will help you.
Regards,
Sarbhjeet Kaur

Setup more than one policy in one day using Access Restriction

Anyone can tell me how to set up two policys in one day using Access Restriction ?
For example:
For Weekdays, before 6pm, no restriction to use internet. after 6pm, internet ok, but certain web site or ports need to be blocked.
I can set up policy for after 6pm but then before 6pm, the router consider no-internet access period.
Any advise ?

what you just need to do is to set the policy to allow from 6PM upto the time you wanted your router to give internet access... and just set the status to enable.. type in the LAN mac adress of your router in the edit PC list, then save the settings
"a helping hand in a community makes the world a universe"

Oim 11g r2: data access restriction using roles instead of organisations

can i implement data access restriction using roles instead of organisations in oim 11g r2?

in my use case a particular user can be member of more than one organisation. as far as i know oim does not suoport this use case using organisation, so i decide to use roles to represent my "organizations", but now i loose all the data access restrictions (scope).

WRT54GS2 hangs frequently when using Access Restrictions

I have a WRT54GS2 with firmware 1.0.02. Recently I started using Access Restrictions creating 3 policies configured for daily/24hour access with website blocking by URL and URL Keywords. Blocking 3 sites and 15 keywords. It works fine but now the router hangs ever so often seemingly randomly. When it hangs I loose internet connectivity from my computers and I have to power cycle the router to restore function. Without the Access Restrictions it seems to run stable for weeks without any problems. Any ideas or workarounds? Any firmware fixes on the way?
/Fred

I tried with a single rule after the reset procedure and still had problems later on. Like this: Internet Access Policy 1 set to Enable, Allow, Everyday, 24 Hours, NO blocked servies, NO web site url blocking, 6 adult key words. Runs fine sometimes for many hours but then suddenly the router disappears. I have multiple devices (iPhones/iTouche/wired PCs, wireless laptops) in the network going through this router. I've disabled the policies this evening to verify that it's stable without access restrictions.

WRT160Nv3 problem with blocking traffic using Access Restrictions

Hi.
I want something quite simple. Block Youtube. I go into "Access Restrictions", choose a name for policy 1, enable it, choose the pc from the pc list, but then...
if a click Deny, all other options will be disabled (greyed out, can't click nor write on them).
Therefore, I can't put the urls I want (youtube).
I tried writing the url with "allow" and then change it to "deny" but it will block ALL traffic.
No good.
So, how do I make a new policy just to block this one URL?
Is it normal that when I click and choose "Deny" everything gets disabled afterwards?
Thanks in advance.
Regards,
Leo
Solved!
Go to Solution.

for internet access policy DENY means to restrict internet access during specified days and hours. this will block ALL internet traffic for the said schedule. website blocking by URL, blocking by means of keyword and blocking applications would then be NOT AVAILABLE as the computers would not have internet access to begin with if you have such a policy disabled.
for your case, you may want to try to set restriction to ALLOW internet access then specify youtube.com under Website Blocking by URL. this would allow computers to have access to the internet all the time (if you have the schedule set to EVERYDAY) or during specific days and hours but NOT have access to youtube.

How to configure CLI/DNIS based access restriction in 5.3 ?

Hi,
does anybody have an idea how the setting
define CLI/DNIS-based access restrictions which is defined in ACS v. 4.2
can be configured in acs 5.3 ?
in v. 4 for every user in a group with 40 members a different CLI is defined for each. How can I configure that in version 5.3 ?
any help as always much appreciated!

The equivalebt to NAR functionality can be found at:
Policy Elements > Session Conditions > Network Conditions > End Station Filters
Can then define an object with a set of CLI values
These objects can then be used in policy conditions. So can create a condition with a set of CLI values and then match in authorization policy for values that are included in this set and set authorizations accoridngly
Not sure if this is your use case but hopefully may be a start

Access restrictions timing off by 1 hour

I don't know if anyone else is experiencing this problem. I have set access restrictions on my WRT610N router and they execute an hour earlier than set.
I checked the time zone settings, the system clock and all seem correct. I have a rule that is supposed to turn off access to the Internet at 11:55pm. However, the rule gets executed at 10:55pm.
This was happening on my first WRT610N which was also dropping network connections. So, I returned that unit and got a replacement.
The new unit does not drop connections but has the same timing problem. The only solution I have found is to change the time zone to the next one that is 1 hour behind my time zone.
Please let me know if anyone else has experienced this same situation.

My ISP is on the same town as I am. The information they are supplying appears to be correct as my WRT54G uses the same information and its rules execute properly.
I think there is a problem with the WRT610N. My solution is temporary I hope that Linksys will fix this problem.

WRTU54G-TM Slow Setup Page and HTML Error on Access Restrictions Page

I have a WRTU54G-TM Wireless Router. It has v1.00.21 firmware and I have done a reset with no solution. Everything seems to work, except the setup pages load very, very, very slow. Also in Internet explorer I get an HTML error on the access restrictions page. Resets don't help. The router did not have this issue until about a month ago that I recall. I can see on the access restrictions page the gray shading is all lined up except at the bottom on the page, like ther is some sort of issue in the html within the router.
One more problem, after I reset the router the saved config file I made would not change the default settings back, I had an older saved config file also, it would not work either.
Is this an issue with this firmware version? Any one else see this?
Message Edited by johnsonle9 on 01-24-2010 01:24 PM
Message Edited by johnsonle9 on 01-24-2010 01:24 PM

Are you getting the same problem with another computer...?
Try using different computer and check if you are getting the same problem or not...If yes then,I would suggest you to re-flash/upgrade the router's firmware,reset the router and re-configure it from scratch..Do not use the save config file.

Access restriction error? not sure how to fix it....

I am trying to use JPEGImageEncoder and i imported import com.sun.image.codec.jpeg.*; fine but i get the following error on my code:
CODE:
JPEGImageEncoder encoder =JPEGCodec.createJPEGEncoder(outImage);
ERROR:
Access restriction: The type JPEGImageEncoder is not accessible due to restriction on required library /usr/local/java/jdk1.6.0_07/jre/lib/rt.jar
I am not sure how to fix this... anyone know what needs to be done? I am using eclipse and i see the rt.jar in my library....
thanks!

MikeTheBorg wrote:
OK, I agree it's simpler for simple cases, but how do I do something like this:
          JPEGImageEncoder jie = JPEGCodec.createJPEGEncoder(os);
          JPEGEncodeParam jep = jie.getDefaultJPEGEncodeParam(bi);
          jep.setDensityUnit(JPEGEncodeParam.DENSITY_UNIT_DOTS_INCH);
          jep.setXDensity(1200);
          jep.setYDensity(1200);
          jep.setQuality(1, false);
          jie.setJPEGEncodeParam(jep);
          jie.encode(bi);
using ImageIO?
"Stupid" Eclipse+Maven refuse to compile this legacy code.It's an Eclipse error, not a Java/compiler error as such. To fix it, I believe you have to check your plug-in configuration -- imported packages here or exported packages there. Try adding "com.sun.image.codec.jpeg" to the imported packages. Something along those lines. Anyway, bottom line: this is not an issue with the code.
Furthermore, lookee here: GIAD

@prompt used as part of Access Restriction

Similar Messages

Maybe you are looking for