Prompt with default date ( currentdate-1 and current date-8)

Dear all,
I am creating an @prompt varaiable for Date .
@Prompt('message','type',lov,Mono, free,persistent,default_values)
Requirement is in Place of "Default Values" i need show currentdate -1 and currentdate-8 .
Thanks
suresh.p

Hi Suresh,
I have got more idea to do this.
1 .Build another object of the same field in unv = u201CDate Rangeu201D
code:
    case when (Date between trunc(sysdate u2013 1) and trunc(sysdate)) then u2018Yesterdayu2019
             when (Date between trunc(sysdate u2013 8) and trunc(sysdate+1)) then u2018Last 8 Daysu2019
   end
2. Now Add Yesterday in the defalut for currentdate-1 promp or u2018Last 8 Daysu2019 for currentdate-8 Prompt.
= @Prompt(u2019Date Pickeru2019,'Au2019,DateX,mono,constrained,persistent,{u2019Yesterdayu2019})
   Create this prompt in the "Date Range" objects. or create a condition, What ever way you want it.
Please try this and see if this can work without any parsing error.
Edited by: srrachna on Mar 17, 2011 12:06 PM

Similar Messages

Historic and Current data for Master data bearing objects

Hi All,
We are trying to implement type 2 dimensions for all the master data bearing characteristics, where we require historic and current data available for reporting. the master data can have a number of attributes and all of them can be time dependent. We are not getting any 'datefrom' or 'dateto' from the source system.
For example:
For Example: The table below shows data entering BI at different dates.
Source Data day of entering BI
MasterID ATTR1 ATTR2
123506 Y REWAR day1
123506 N REWAR day4
123506 Y ADJUST day4
123506 N ADJUST dayn
The field 'day of entry into BI' is only for your understanding; we do not get any date fields from the source. SID is the field we are generating for uniqueness. It is a counter. EFF_DATE would be the current date for all the data. EXP_DATE would be 31.12.9999 until the attributes change. SID and MasterID together would be the key.
On day 1 the following data enters BI,
day 1
SID MasterID ATTR1 ATTR2 EFF_DATE EXP_DATE
1 123506 Y REWAR 2/10/2009 12/31/9999
On day 4, 2 data records enter with same PID,
SID MasterID ATTR1 ATTR2 EFF_DATE EXP_DATE
2 123506 N REWAR 2/13/2009 12/31/9999
3 123506 Y ADJUST 2/13/2009 12/31/9999
the EXP_DATE of the record of day 1 needs to be changed to current date.
Also there are two records entering, so latest record would have EXP_DATE as 31.12.9999. And the EXP_DATE of the first record on day 4 should change to the current date.
so the following changes should happen,
CHANGE
SID MasterIDATTR1 ATTR2 EFF_DATE EXP_DATE
1 123506 Y REWAR 2/10/2009 2/13/2009
CHANGE
SID MasterID ATTR1 ATTR2 EFF_DATE EXP_DATE
3 123506 Y ADJUST 2/13/2009 2/22/2009
On day n, one data record enters with same PID,
SID MasterID ATTR1 ATTR2 EFF_DATE EXP_DATE
4 123506 N ADJUST 2/22/2009 12/31/9999
The change is ,
CHANGE
SID MasterID ATTR1 ATTR2 EFF_DATE EXP_DATE
3 123506 Y ADJUST 2/13/2009 2/22/2009
The data expected in P-table is as below, on Day n or after Day n, untill any other record enters for this MasterID,
1 123506 Y REWAR 2/10/2009 2/13/2009
2 123506 N REWAR 2/13/2009 2/13/2009
3 123506 Y ADJUST 2/13/2009 2/22/2009
4 123506 N ADJUST 2/22/2009 12/31/9999
Has anyone worked on type 2 dimensions earlier? Or any ideas to implement this logic would be appreciated.
Regards,
Sudeepti

Compound the Master ID with eff date and other attribute as superior objects
so you will get P-table as
ATTR1 ATTR2 MAT ID
1 2/10/2009 2/13/2009 123506 Y REWAR
2 2/13/2009 2/13/2009 123506 N REWAR
3 2/13/2009 2/22/2009 123506 Y ADJUST
4 2/22/2009 12/31/9999 123506 N ADJUST

How to display the username and current date in OAF page Footer region

Hi,
I need to display the username and Current-Date in footer region.If anybody knows the procedure then please share with me.
Thanks
Divya Agarwal

Hi,
Read this Thread:--
You have to capture the UserName and Date in the Process Request Method of page Controller and invoke a method which will subsequently get and set the value in some attribute.
String userName = pageContext.getUserName();
How to populate Current Date and Time in OAF page through CO
Thanks
--Anil

Increment the version and current date in .ver file

Hi All,
I have the version.ver file and it looks like
[version]
BuildDates=2014.10.01
Script=01
MainVersion=1.00.00.00:01
I want to increment the values and current date if i trigger the build using batch script. The output i need is like this
BuildDates=yy.mm.dd (current date)
Script=02
MainVersion=1.00.00.00:02
Thanks in advance

Thanks for your reply. This is my script
@echo off>newfile&setlocal enabledelayedexpansion
:: set up your date here. It probably won't match my format so you'll need to adapt:
set dt=%date:~10,4%.%date:~7,2%.%date:~4,2%
for /f "skip=2 tokens=2,3 delims==:" %%a in ("filename") do (
set v= %%b
set v= !v: 0=!
set /a v+=1
set v=0!v!
set v=!v:~-2!
>>newfile echo SCRIPT=!v!
>>newfile echo BuildDates=%dt%
>>newfile echo MajorVersion=%%a:!v!
goto :aa
:aa
more +3 "filename" >> newfile
del "filename"
ren newfile "filename"
Before execute the script my file will be look like:
version]
BuildDates=date
Script=09
MainVersion=3.00.00.00:09
after executing i am getting the output value as
BuildDates=date
Script=01
MainVersion=19:01
MainVersion=3.00.00.00:09

Pre-populate data and current date only when it routes to that person

Hi,
Can any one please advise how to pre-populate the manager's name when it routes to the manager but not when the user fills the form.
Example: user fills the form and submit it to the manager, the process has the query to look up for the manager to route it to him for approve/deny. How can I have the manager's name to pre-populate so he/she does not have to type their name and current date to approve/deny the form.
Thanks in advance,
Han Dao

Paul,
If I have the codes to execute the WS at the initialize event then it does populate the manager info when the user fills the form but when I try to move the code to the pre-submit event which try to execute WS when it route to the manager. I know I did not do it right but have no idea how to make it work.
Is there a way to execute the WS when it routes to the next person rather than when the user fills the form?
Thanks,
Han

Prompt with Default date (Current Date)

Hi Experts,
I have WEBI Report With Calendar Date (0CALDAY) Object on a OLAP Universe (OLAP Universe built on SAP BW BEx Query).
I need to create a prompt on Calendar Date Object with default value as Current date (systemdate). I need to create this at universe level not at BEx level (No Exceptions).
Looking forward to hear from you.
-Thanks,
Deepu

Hi Ingo,
Thanks for your response.
>
Ingo Hilgefort wrote:
> this is because a EXIT VAriable doesn't have a DEFAULT value.
>
> Ingo
But EXIT Variable has a DEFAULT value in BEx Designer. DEFAULT Value (Current system Date) is populated when a BEx Query is Run. How come it is not properly reflected into BOBJ?. It retrieves the data for Current system Date in BOBJ too when WEBI Query is run but it does not show Current system Date in prompt screen.
I hope you understand my problem.
-Thanks,
DEEPU.

How to create a prompt with default value as current_date?

Hello
I'd like to create a prompt on the dashboard that has current_date as the default value. Is it possible to achieve so?
Please provide any pointers..
Thank you

Unfortunately, no. Presentation variables are declared in a dashboard prompt (see page 44 of this link http://download.oracle.com/docs/cd/B40078_02/doc/bi.1013/b31767.pdf)
Any other type of workaround would not be worth the trouble of asking the developers to create the variable for you. One note, the current date may very well already be defined and just not known to you. Can you ask your developer if he/she has a variable that contains the current date or how long it would take to create one for you?
As a whole, it would be nice to have a set of "date" repository variables if you run Requests based on common date ranges (e.g., first day of current month, last day of current month, first day of quarter, last day of quarter, most recent end-of-year date, etc.) These can be very useful in automating reports so they don't require prompts. Of course, it depends on your organization and what you use OBIEE for...
We have built many such variables and it has been very valuable to the users and report builders. Just a thought...

How to reference application version number and current date in page footer

Am new to Apex and am creating first app for production users on Apex 4.0.1 ... I notice that Application Builder app itself displays the version number at bottom right of screen .. are there any substitution strings that I can use to get current date and application version in my own Apex app ... or do I need to create e.g Javascript to format the date and create my own substitution string ?
Any help much appreciated .. thanks !

I modified the Footer of our Default page template. Used JavaScript for the date, below is the code we use. The very last table is specific to our environment and it would need to be customized for your use or removed if not needed. I am a JavaScript novice so this may be crude but it does the job.
Jeff
<table width="100%" cellpadding="0" cellspacing="0"
border="0">
<tr>
<td width="500">
<script Language="JavaScript">

</script>
<script Language="JavaScript">

</script>
</td>
<td width="300" class="fineprint"><div align="right">
</div></td>
<td width="900" class="fineprint"><div align="right">
&APP_USER.
#APP_VERSION#
</div></td>
</tr>
</table>
<table width="100%" cellpadding="0" cellspacing="0"
border="0">
<tr>
<td width="33%" align="left" valign="bottom"><img
src="#WORKSPACE_IMAGES#iconseal-rust.gif" alt="NH State Seal" width="25"
height="25" /></td>
<td width="33%" align="center" valign="bottom"><a href="http://www.nh.gov/" class="fineprint">NH.gov</a>
<a href="http://www.nh.gov/disclaimer.html"
class="fineprint">Privacy Policy</a> <a
href="http://www.nh.gov/wai/index.html" class="fineprint">Accessibility
Policy</a></td>
<td width="33%" class="fineprint"><div align="right">Copyright &#169 State of
New Hampshire, 2007-2010</div></td>
</tr>
</table><br />
#FORM_CLOSE#
</body>
</html>

Logotype and Current Date in PDF - Web Applications

Is possible to insert an image (company logotype) and a text (title and date) in PDF generate through Printed Version functionality? The generated PDF only contains result table of the report.
By the way, how can I insert current date in a web application? I dont want to use javascript because javascript would return de time/date of the end user computer.
Thanks in advance.
Best regards,
Raphael Barboza

Hi Raphael,
Q1) Is possible to insert an image (company logotype) and a text (title and date) in PDF generate through Printed Version functionality? The generated PDF only contains result table of the report??
A)In PDF Print Properties you should be able enter "Title and Date" and also When you define command sequence make sure to call "Analaysis Item only" otherwise the whole template will be downloaded to PDF. Please play with the properties when defining Command Sequence.
Q2) how can I insert current date in a web application? I dont want to use javascript because javascript would return de time/date of the end user computer ???
A) Use Web Template "TEXT ITEM" and in the web item properties "LAST UPDATED or KEY DATE" is the property you should assign.
Sorry I dont have my system as of now to send you code for these but they are pretty easy.
thanks,
Deepak
SAP BI Consultant
D N Tech

Consecutive Numbering and Current Date

I am trying to create an invoice (that I will save as a template) and I want the invoice number to change, each time I open the invoice template, to the next consecutive number. I also want the date to stay current each time I open the document. Can anyone help? Thanks in advance.

MATOS-3802 wrote:
Thanks for the reply. I am neither familiar with computer lingo nor am I very computer savvy, so a lot of that is really confusing to me. Is there a plain English "numbers for dummies" way of going about it? Thanks again.
Hi MATOS,
Fortunately you don't need to understand most of it in order to use it.
As a user, you need only understand:
Open the Script Editor.
Copy Yvan's script from his post, then Paste it into the Script editor.
Then read this part (assuming your English is stronger than your French). The numbers labeling the sections are used in my notes below:
Section 1A:
+++++++
Save this script as Script : invoiceWithDateAndnumber.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Note 1
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Section 1B
menu Scripts > Numbers > invoiceWithDateAndnumber
will create a new document from the defined user template
and insert a new number and the current date as a fixed value.
Section 2
--=====
The Finder's Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the "Show Script Menu in menu bar" checkbox.
Section 3
--=====
Yvan KOENIG (VALLAURIS, France)
2010/06/05
Section 4
--=====
property theApp : "Numbers"
Adapter ces six “properties” à vos besoins
Adjust these six properties to fit your needs
property myTemplate : "my_invoice.nmbtemplate"
property fichierNum : "the_number.txt"
property mySheet : "1"
property myTable : "1"
property cell4number : "A1"
property cell4date : "A2"
--=====
Section 4 is the beginning of the actual script. You will need to edit the properties list to fit your own situation.
The first property "theApp" names the application (Numbers) that the script affects. Do not change this.
Below the line "Adjust these...":
myTemplate:
Change "my_invoice.nmbtemplate" to match the name of your Invoice template, and add the ".nmbtemplate" extension to the name.
fichierNum:
This is the name of the file that keeps the most recent invoice number. The script will create the file the first time the script is run, and will update it each tome after that. No change is needed in this line.
mySheet:
myTable:
These are currently set to use the first (ie. top of the list) Table on the first sheet of your invoice template. If the template contains only one table (and only one sheet) no change is needed. If your template contains more than one table, you may need adjust the number(s).
cell4number:
This is the cell in which the Invoice Number will be placed. Change "A1" to the actual location of the Invoice Number on your template. Remember to enclose the location in double quotes.
cell4date:
This is the cell in which the current date will be placed. Change "A2" to the actual location of the Invoice Date on your template. Remember to enclose the location in double quotes.
In Section 1, Note 1 tells you you will need a specific set of folders in which to place the script.
In the Finder, open a new window and click on yourAccount (the house icon with your username below it), then on Library, then on Scripts, then on Applications, then on Numbers.
Each time you click, it opens the folder and shows (in the next column, if your Finder window is in Column view) the items in that folder. If any of the names on this path are missing, you will need to go to the File menu, choose New Folder, and give the new folder the name shown above. (If you have not yet added any scripts, you will likely need to create at least the Applications and Numbers folders.)
Section 1A tells what to do with the script after you have edited it: Save it in the Numbers folder you created above. You can save it to the Desktop, then move it to the correct folder, or you could save it directly to the correct folder. Yvan's name is chosen to tell exactly what the script does.
Section 1B tells how to call the script (ie. how to get it to do what it's written to do):
go to the Scripts Menu, choose Numbers, then choose "invoiceWithDateAndnumber",
then describes what the script does.
The Scripts menu is likely not yet in your Menu bar, so Section 2 tells how to get it there. If you, like me, have a crowded Menu bar already, you may also have to remove something else to make room for the Scripts menu.
Section 3 tells who wrote the script (Yvan) and when he did so.
Once you've completed those steps (editing properties and saving the script to the correct location), creating a new dated and numbered invoice is a simple matter of choosing this script in the Scripts menu.
Regards,
Barry

Here's how to do ALV (OO) with dynamic fcat, int table and editable data

Hi everybody
Here's a more useful approach to ALV grid with OO using dynamic table, data NOT from DDIC, dynamic FCAT and how to get changed lines from the grid when ENTER key is pressed.
It's really not too dificult but I think this is more useful than the ever present SFLIGHT methods from the demos.
This also defines a subclass of cl_gui_alv_grid so you can access the protected attributes / methods of that class.
You don't need to add the class via SE24 -- done fron this ABAP.
When you run it click Edit for the first time.
After editing data press ENTER and the break point should bring you into the relevant method.
Code developed on NW2004S trial version but also works on rel 6.40 on a "Real" system.
The code should work without any changes on any system >=6.40.
All you need to do is to create a blank screen 100 via SE51 with a custom container on it called CCONTAINER1.
The rest of the code can just be uploaded into your system using the SE38 upload facility.
When running the program click on the EDIT button to enable the edit functionality of the grid.
Change your data and when you press ENTER you should get the break-point where you can see the original table and changed rows.
This program is actually quite general as it covers Dynamic tables, building a dynamic fcat where your table fields are NOT in the DDIC, intercepting the ENTER key via using an event, and accessing the protected attributes of the cl_gui_alv_grid by defining a subclass of this class in the abap.
I've seen various questions relating to all these functions but none in my view ever answers the questions in a simple manner. I hope this simple program will answer all these and show how using OO ALV is actually quite easy and people shouldn't be scared of using OO.
Have fun and award points if useful.
Cheers
Jimbo.
<b>PROGRAM zdynfieldcat.
Simple test of dynamic ITAB with user defined (not ddic) fields
Build dynamic fcat
use ALV grid to display and edit.
*When edit mode set to 1 toolbar gives possibility of adding and
*deleting rows.
*Define subclass of cl_gui_alv_grid so we can use protected attributes
*and methods.
Add event handler to intercept user entering data and pressing the
*ENTER key.
When enter key is pressed get actual value of NEW table (all rows)
rather than just the changed data.
*use new RTTI functionality to retrieve internal table structure
*details.
Create a blank screen 100 with a custom container called CCONTAINER1.
James Hawthorne
include <icon>.
define any old internal structure NOT in DDIC
types: begin of s_elements,
       anyfield1(20) type c,
       anyfield2(20) type c,
       anyfield3(20) type c,
       anyfield4(20) type c,
       anyfield5(11) type n,
       end of s_elements.
types: lt_rows type lvc_t_roid.
Note new RTTI functionality allows field detail retrieval
at runtime for dynamic tables.
data:   wa_element type s_elements ,
        wa_data type s_elements,
        c_index type sy-index,
        c_dec2 type s_elements-anyfield5,
        wa_it_fldcat type lvc_s_fcat,
        it_fldcat type lvc_t_fcat,
        lr_rtti_struc TYPE REF TO cl_abap_structdescr,    "RTTI
        lt_comp TYPE cl_abap_structdescr=>component_table,"RTTI
        ls_comp LIKE LINE OF lt_comp,                     "RTTI
        zog like line of lr_rtti_struc->components,      "RTTI
        struct_grid_lset type lvc_s_layo,
        l_valid type c,
        new_table type ref to data.
field-symbols: <dyn_table> type standard table,
               <actual_tab> type standard table,
               <fs1> type ANY,
               <FS2> TYPE TABLE.
data: grid_container1 type ref to cl_gui_custom_container.
class lcl_grid_event_receiver definition deferred.
data: g_event_receiver type ref to lcl_grid_event_receiver.
data: ls_modcell type LVC_S_MODI,
      stab type ref to data,
      sdog type s_elements.      .
class lcl_grid_event_receiver definition.
public section.
    methods:
    handle_data_changed
         for event data_changed of cl_gui_alv_grid
             importing er_data_changed,
       toolbar for event toolbar of cl_gui_alv_grid
                 importing e_object
                           e_interactive,
      user_command for event user_command of cl_gui_alv_grid
                 importing e_ucomm.
endclass.
*implementation of Grid event-handler class
class lcl_grid_event_receiver implementation.
method handle_data_changed.
code whatever required after data entry.
various possibilites here as you can get back Cell(s) changed
columns or the entire updated table.
Data validation is also possible here.
perform check_data using er_data_changed.
endmethod.
Method for handling all creation/modification calls to the toolbar
method toolbar.
    data : ls_toolbar type stb_button.
Define Custom Button in the toolbar
    clear ls_toolbar.
    move 0 to ls_toolbar-butn_type.
    move 'EDIT' to ls_toolbar-function.
    move space to ls_toolbar-disabled.
    move 'Edit' to ls_toolbar-text.
    move icon_change_text to ls_toolbar-icon.
    move 'Click2Edit' to ls_toolbar-quickinfo.
    append ls_toolbar to e_object->mt_toolbar.
    clear ls_toolbar.
    move 0 to ls_toolbar-butn_type.
    move 'UPDA' to ls_toolbar-function.
    move space to ls_toolbar-disabled.
    move 'Update' to ls_toolbar-text.
    move icon_system_save to ls_toolbar-icon.
    move 'Click2Update' to ls_toolbar-quickinfo.
    append ls_toolbar to e_object->mt_toolbar.
    clear ls_toolbar.
    move 0 to ls_toolbar-butn_type.
    move 'EXIT' to ls_toolbar-function.
    move space to ls_toolbar-disabled.
    move 'Exit' to ls_toolbar-text.
    move icon_system_end to ls_toolbar-icon.
    move 'Click2Exit' to ls_toolbar-quickinfo.
    append ls_toolbar to e_object->mt_toolbar.
endmethod.
method user_command.
    case e_ucomm .
      when 'EDIT'.          "From Tool bar
        perform set_input.
         perform init_grid.
      when 'UPDA'.          "From Tool bar
        perform refresh_disp.
        perform update_table.
      when 'EXIT'.          "From Tool bar
        leave program.
    endcase.
endmethod.
endclass.
class zcltest definition inheriting from cl_gui_alv_grid.
define this as a subclass so we can access the protected attributes
of the superclass cl_gui_alv_grid
public section.
methods: constructor, disp_tab.
endclass.
need this now to instantiate object
as we are using subclass rather than the main cl_gui_alv_grid.
class zcltest implementation.
METHOD constructor.
CALL METHOD super->constructor
        exporting i_appl_events = 'X'
           i_parent = grid_container1.
endmethod.
method disp_tab.
FIELD-SYMBOLS: <outtab> TYPE STANDARD TABLE.
break-point 1.
mt_outtab is the data table held as a protected attribute
in class cl_gui_alv_grid.
ASSIGN me->mt_outtab->* TO <outtab>. "Original data
do whatever you want with <outtab>
contains data BEFORE changes each time.
Note that NEW (Changed) table has been obtained already by
call to form check_data USING P_ER_DATA_CHANGED
         TYPE REF TO CL_ALV_CHANGED_DATA_PROTOCOL.
Entered data is in table defined by <fs2>
In this method you can compare original and changed data.
Easier than messing around with individual cells.
do what you want with data in <fs2> validate / update / merge etc
endmethod.
endclass.
data :
    ok_code like sy-ucomm,
    save_ok like sy-ucomm,
    i4 type int4,
Container Object [grid_container]
now created via method constructor
in the subclass zcltest.
Control Object [grid]
grid1 type ref to zcltest,
Event-Handler Object [grid_handler]
grid_handler type ref to lcl_grid_event_receiver.
start-of-selection.
call screen 100.
module status_0100 output.
now display it as grid
if grid_container1 is initial.
    create object grid_container1
        exporting
          container_name = 'CCONTAINER1'.
    create object grid1.
     break-point 1.
    create object grid_handler.
    set handler:
       grid_handler->user_command for grid1,
       grid_handler->toolbar for grid1,
       grid_handler->handle_data_changed for grid1.
perform create_dynamic_fcat.
perform create_dynamic_itab.
perform populate_dynamic_itab.
perform init_grid.
perform register_enter_event.
set off ready for input initially
i4 = 0.
call method grid1->set_ready_for_input
         exporting
           i_ready_for_input = i4.
endif.
endmodule.
module user_command_0100 input.
*PAI not needed in OO ALV anymore as User Commands are handled as events
*in method user_command.
*we can also get control if the Data entered and the ENTER is pressed by
*raising an event.
Control then returns to method handle_data_changed.
endmodule.
form create_dynamic_fcat.
get structure of our user table for building field catalog
Use the RTTI functionality
lr_rtti_struc ?= cl_abap_structdescr=>describe_by_data( wa_data ).
Build field catalog just use basic data here
colour specific columns as well
loop at lr_rtti_struc->components into zog.
c_index = c_index + 1.
clear wa_it_fldcat.
wa_it_fldcat-fieldname = zog-name .
wa_it_fldcat-datatype = zog-type_kind.
wa_it_fldcat-inttype =   zog-type_kind.
wa_it_fldcat-intlen =    zog-length.
wa_it_fldcat-decimals = zog-decimals.
wa_it_fldcat-lowercase = 'X'.
if c_index eq 2.
wa_it_fldcat-emphasize = 'C411'.
     endif.
    if c_index eq 3.
wa_it_fldcat-emphasize = 'C511'.
   endif.
append wa_it_fldcat to it_fldcat .
endloop.
endform.
form create_dynamic_itab.
Create dynamic internal table and assign to field sysmbol.
Use dynamic field catalog just built.
call method cl_alv_table_create=>create_dynamic_table
             exporting
                it_fieldcatalog = it_fldcat
             importing
                ep_table        = new_table.
assign new_table->* to <dyn_table>.
endform.
form populate_dynamic_itab.
load up a line of the dynamic table
c_dec2 = c_dec2 + 11.
wa_element-anyfield1 = 'Tabbies'.
wa_element-anyfield2 = 'ger.shepards'.
wa_element-anyfield3 = 'White mice'.
wa_element-anyfield4 = 'Any old text'.
wa_element-anyfield5 = c_dec2.
append wa_element to <dyn_table>.
endform.
form check_data USING P_ER_DATA_CHANGED
           TYPE REF TO CL_ALV_CHANGED_DATA_PROTOCOL.
Get altered data back
ASSIGN   p_er_data_changed->mp_mod_rows TO <FS1>.
stab =       p_er_data_changed->mp_mod_rows.
ASSIGN STAB->* TO <FS2>.
LOOP AT <FS2> INTO sdog.
ALV grid display with altered data is now in <fs2>.
do any extra processing you want here
endloop.
now display new table
call method grid1->disp_tab.
endform.
form exit_program.
call method grid_container1->free.
call method cl_gui_cfw=>flush.
leave program.
endform.
form refresh_disp.
call method grid1->refresh_table_display.
endform.
form update_table.
The dynamic table here is the changed table read from the grid
after user has changed it
Data can be saved to DB or whatever.
loop at <dyn_table> into wa_element.
do what you want with the data here
endloop.
switch off edit mode again for next function
i4 = 0.
call method grid1->set_ready_for_input
      exporting
          i_ready_for_input = i4.
endform.
form set_input.
i4 = 1.
call method grid1->set_ready_for_input
     exporting
       i_ready_for_input = i4.
endform.
form switch_input.
if i4 = 1.
i4 = 0.
else.
i4 = 1.
endif.
call method grid1->set_ready_for_input
     exporting
       i_ready_for_input = i4.
endform.
form init_grid.
Enabling the grid to edit mode,
     struct_grid_lset-edit = 'X'. "To enable editing in ALV
     struct_grid_lset-grid_title = 'Jimbos Test'.
     call method grid1->set_table_for_first_display
       exporting
         is_layout           = struct_grid_lset
       changing
         it_outtab             = <dyn_table>
         it_fieldcatalog       = it_fldcat.
endform.
form register_enter_event.
call method grid1->register_edit_event
               exporting
                  i_event_id = cl_gui_alv_grid=>mc_evt_enter.
Instantiate the event or it won't work.
create object g_event_receiver.
set handler g_event_receiver->handle_data_changed for grid1.
endform.</b>

Hi there
IE7 doesn't give me the add new page option and I get 404 error when trying to access the "How to contribute" section.
I'll load up Firefox later (this browser usually works when IE7 doesn't always work properly).
I'll copy the stuff to the wiki when I've got the browser sorted out.
Cheers
jimbp

Previous and current date calculations

I already have the Date object ( let us say d1 )which is having the past date.
and I can get the current date anyhow using calendar instance () let us say d2).
My question is, I want to compare these 2 dates for the month, year and date. it is easy to get the current date, year and month. but I cannot use getMonth(), getDate, getYear() on the Date object, becoz they are deprecated. so, how can i get the month date and year from the date d1 ?
any help is appreciated.
u can email me the answer, [email protected]
Thank you,
Nisa.

If you only need to know if d1 is before, equal to, or after d2 you can use d2.compareTo(d1) If 0, they are equal, negative means d2 is before d1, positive means d1 is before d2.
If you need the actual month, day, or year of either date, then one way is to convet the dates to strings, pass them through a StringTokenizer and grab it's parts that way.

Selection based on previous run date , time and current date a

HI all,
I have the selection as follows.
Previous run date : .12/14/2005..                     previous run time-14:30:56
current run date : 12/17/2009.                      current run time: 07:05:31
Here all are parameters. and current run date is system date and   current run time is system time.
i want to fetch all the deliveries from the above selection including previous run date and time.
Any inputs..

Hi
Append current run data and previous run data into a data range parameter,Current time and previous time into time range parameter and fetch the data based on the range parameters.
Regards
Srilaxmi

I receive the following error: (Error code: ssl_error_renegotiation_not_allowed) which worked fine with previous version of firefox and current safari

Trying to get to secure website (Login site for IRB at Ochsner). Worked fine with previous version of Firefox and continues to work with safari. I receive the following error code:
(Error code: ssl_error_renegotiation_not_allowed)
Any Thoughts?
Thanks,
M White New Orleans

Here's one solution from last year: http://dotomaz.tumblr.com/post/786443743/firefox-4-0b1-and-ssl-renegotiation

Data changed based on current date in Bex

Hi Gurus,
   Hope you are all doing good ! I have a scenario in queries in Bex. When the query is executed the current system date must be captured and the data must be divided by the count of the previous months.
   For instance if the query is executed today the data must be divided by 1 ( for jan)
   if it is executed next month, then the data muset be divided by 2 ( jan + feb ).
   Is there any COUNT variable in Bex ? Any idea how this could be done?
Points would be assigned for sure.
Regards,
Sunitha.R

Sunitha,
    You should create a variable which is not user entry and user exit as processing type. Based upon the date entered you should write code in CMOD to derive the figure with which you can divide the amount.
The logic can be something like this:...
If the user enters     period like 02.2207(feb 2007), then you can pass value as 2 for the variable newly created. This is a simple code which can be written easily if you have ABAP knowledge.
Try it out.....

Prompt with default date ( currentdate-1 and current date-8)

Similar Messages

Maybe you are looking for