Prompted for sysman username/ password twice
hello. i've just installed gc 10.2.0.5. when logging on to the console, it prompts me for the username/password twice, even though the information was installed correctly the first time. has anyone seen this behavior, and if so, what is needed to resolve this . thanks
Hi,
* Does the second attempt allow you to login successfuly and Grid Control works?
* Also did you change the sysman password recently?
* Are there any errors logged in OMS_HOME/sysman/log which the first attempt fails?
* Is it a single OMS or multiple OMS with SLB setup.
Regards
Laiju
Similar Messages
-
Prompt for a username/password while accessing a resource in wls 6.0
Hi all, I want to restrict access to any resource on my weblogic
server 6.0 and prompt for a user name and password before accessing
any resource. I did this using weblogicurl.policy file in wls 5.1.
I am not able to find out how to do this in 6.0. Can anyone help
me out plz. thanx, PrabhatWL 6.0 doesnot support URL based access control directly but you can read on
docs on these two links and
they helped me to restrict access to certain url's by prompting user for
username and password
http://e-docs.bea.com/wls/docs60/programming/webappdeployment.html
http://e-docs.bea.com/wls/docs60/adminguide/config_web_app.html
"Tom Mitchell" <[email protected]> wrote in message
news:[email protected]..
Prabhat,
You can restrict access to deployed resources by specifying the access
constraints in the deployment descriptors. For things without
deployment descriptors, you can use the console.
HTH.
prabhat wrote:
Hi all, I want to restrict access to any resource on my weblogic
server 6.0 and prompt for a user name and password before accessing
any resource. I did this using weblogicurl.policy file in wls 5.1.
I am not able to find out how to do this in 6.0. Can anyone help
me out plz. thanx, Prabhat--
Tom Mitchell
[email protected]
Very Current Stoneham, MA Weather
http://www.tom.org -
Acrobat Distiller prompting for administrator username & password
I have built 2 images on 10.6 with the acrobat 9 (patched with latest updates) and im getting problems with distiller launching under standard accounts. All apps a launched under admin and work fine. However users only have standard account privileges and acrobat application works fine but when i launch distiller (patched to latest update) it prompts the user for the administrator login details.
New mac book pro and mac mini
10.6 (fully patched)
acrobat 9 fully patched
works under administrator account
created a local standard account on machine and it has the same problem.
help!!!extra info - all our users worked in locked down environment so they dont have admin rights. I believe when distiller starts one of its checks/processes needs admin rights to enable to it to start the application. This was checked under the console.app.
i have tried giveing the application full read/write access and permissions but this doesnt resolve issue. -
KB2986204 - After installing users being prompted for a username and password
After client machine have installed this update they are now being prompted for a Username and password when launching outlook. Setting up a fresh copy of outlook also prompts.
Is anyone else having this same issue?For anyone still watching this issue, we're now up to 5 updates that cause this behaviour, we're having to block these on WSUS to prevent our customers being prompted for passwords on domain joined machines using NTLM.
KB2986204
KB2899504
KB2956087
KB2956170
KB2965270
Further progress since my last post in February. We upgraded to CU7 and now CU8 and the problem remains, but we think we have tracked the issue and have a case open with MS. If anyone else is able to test and confirm our findings it would be helpful to know,
below are the key aspects to look for:
- Outlook 2013 has one of the above updates installed.
- The UserPrincipalName ([email protected]) is different to the PrimarySMTPAddress ([email protected]) of the mailbox.
- The computer is domain joined.
- Mapi/HTTP is configured in the Exchange 2013 organisation.
- NTLM/Negotiate is used as the authentication mechanism.
If all of the above aspects are true for your configuration and you are able to re-produce the password prompting try altering the Mailbox PrimarySMTPAddress so that it's the same as the UserPrincipalName.
In our testing the issue went away when the UserPrincipalName and PrimarySMTPAddress matched, not that it gives us a solution as our customers are quite attached to their vanity email addresses, but it does highlight a specific type of behaviour under specific
circumstances. -
Firefox no longer prompts for my username. What controls this?
I use firefox v32.0.3 on a Google Nexus 7.
I want it to prompt for my username when I connect to GMAIL/Contacts etc.
I goto settings=>privacy->clear private data.
It prompts for my username the 1st time, and then afterwards it just allows direct contact without prompting for username or password.
How do I disable this?
Thanks
TerryLooks like you would need to manually sign out after every sign in to get the behavior you want. Google does not provide a "stay signed in" check box to Firefox for Android.
You can ask Google to better support Firefox for Android at https://productforums.google.com/forum/#!forum/gmail -
Preview and print a Crystal report prompted for the sa password
Dear All,
Our customer has Crystal report add-on to be installed. When we Preview and print a Crystal report, we got a window prompted for the sa password. Even we type in a correct password, it still says wrong password...
Every time when I open my report in Crystal Basic 2008 on the server, then go database expert >> My connections >> click + in front of the connection name, it asks my sa password. I type in my password then save and close. Next time when I open the report and go my connections, I have to type in my password again. This only happens on one customer.
Any idea? Thanks a lot.
Regards,
YukaHi Yuka,
1) All their SAP client workstation, they have to have use SQL2008 CD and install SQL Client on it
Correct, MS does NOT support MDAC or WDAC when connecting to SQL 2008.
2) Then go ODBC >> SQL Native Client 10.0 >> Create a new connection to SAP server. Should we use sa user or another use that has the same authorization as sa?
Correct again if they are also using ODBC to connect, as for using the sa account or creating a new one is up to you. I suggest creating a Crystal account with what ever rights your app needs, this way if tracing it turned on etc. you can confirm who is actually running the report.
3) Then from MY Crystal report, I have to use ODBC connection as well?
Just to clarify, if you created your reprots using OLE DB then they can do so also. But you need to update your connection properties. Open each report click on Database, Set Location, scroll down to OLE DB and expand and then choose MS SQL Server Native 10 as your OLE DB provider, fill in all the logon info and then verify the database. Do the same for each subreport also.
Save your report and either send them the new one or if you are doing this remotely then replace the original report.
VERIFY your reports to confirm they still return correct data and do work as expected.
Or if you are using ODBC then yes you do select the MS 10 driver with a new DSN. Then do the above to update the reports to all use ODBC as their data sources.
Hope this is all clear now....
Thanks again
Don -
Repeatedly prompted for air play password?
At work I am repeatedly prompted to enter a password for Air Play though I've never even setup an Air Play password. This just started happening to me recently and is random.....some days it never pops up and days like today It's popped up multiple times. Very frustrating.
Hello leavitt050,
It may help to force close all open apps and reset your device.
Force an app to close in iOS
http://support.apple.com/en-us/HT5137
Turn your iOS device off and on (restart) and reset
http://support.apple.com/en-us/HT1430
If you're still getting prompted for an AirPlay password, the next step would be to reinstall iOS on your device by placing it in Recovery Mode, then choosing Update in iTunes.
Make sure that you have iTunes 12 or later on your computer.
Put your device in recovery mode.
When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on
https://support.apple.com/en-us/HT201412
Cheers,
Allen -
Connect To Server Hangs Before Prompting For Name And Password
Hi Everyone.
Connect to Server hangs for 25 seconds before prompting for name and password.
I am trying to access a share on a Windows 2008 R2 domain controller via a Mac running 10.6.8 (Snow Leopard) using SMB.
Example: smb://192.168.101.11/sharename
Once connected, browsing is fine - it's just the connecting that takes a long time.
I have specified port 139 and login name, I have disabled IP6 on the Mac, the Mac and Windows 2008 server are on the same LAN and are wired.
Again, once connected, browsing is fine - it's just the connecting that takes a long time.
Any help would be appreciated.
DamianSomething to add ...
Connecting to a Windows 2008 stand-alone server outside of the domain (e.g., workgroup) does not have the same problem - the name and password prompt shows immediately. -
Preview a Crystal report prompted for the sa password
Dear All,
When our customer preview a Crystal report, we got a window prompted for the sa password. Even we type in a correct password, it still says wrong password.
Only two user computer have this problem.
How do I solve it?
Regards,
KarenI install Crystal Reports Designing Software on those computers which canu2019t preview reports.
Then start the Crystal Reports design software to open the problem report.
It usually asks to enter the column on the interface u201COLE DB (ADO) u2013 Connect Informationu201D.
But it gets into the interface u201COLE DB (ADO) u2013 OLE DB Supplieru201D.
I correct the setup and save the report.
The problem is solved.
I try many methods, but only this one can solve my problem.
If you have another solution, please tell me, thanks!
Regards,
Karen -
My system is Mac HD OX S 10.8.5. I want to upgrade 10.9.1 and have downloaded it. However, to install it I am prompted for the Admin Password. I don't believe one was ever set up. I have tried my Apple Id Password but not accepted, Advice appreciated?
If you have 10.8.5 you don't have a PowerPC Mac (PPC). PPC is for pre-2006 Macs. Go to Apple menu -> About This Mac to make sure you have an Intel Mac and that you didn't flip the 5 and 8 in your operating system indication. If you actually have 10.5.8 but you have Intel it gets a lot more complicated to install 10.9.
10.5.8 is the maximum for PowerPC.
10.6 can be upgraded on Intel with this tip:
https://discussions.apple.com/docs/DOC-2455
And it also help you get up to 10.6.6 or 10.6.8 as needed.
https://discussions.apple.com/docs/DOC-6271
will help someone with 10.5.8 determine if they are ready to jump to 10.7 or later.
If you have 10.8.5, you must install 10.9.0 first (free from the Mac App Store) to get to 10.9.1.
Backup your data:
https://discussions.apple.com/docs/DOC-1992
and check http://www.roaringapps.com/ and your printer, scanner, and peripheral drivers are compatible with third party vendors before upgrading to 10.9. -
I keep getting prompted for my exchange password for my work email when I try to update
I keep getting prompted for my exchange password for my work email when I try to check/update for new emails. Any resolution other than "contact IT"?
ThanksEnter the correct password in the account under Settings > Mail, Contacts, and Calendars.
-
Hello! 1st post here,
How can I backup iPhone A to iTunes and then restore into iPhone B without getting prompted for a backup password that I do no know or remember ever setting?
To clarify, I am not trying to read an encrypted backup. I would like to make a NEW backup but I do not want it to be encrypted as I do not know nor remember how a password was set in the 1st place. If I unclick the encryption checkbox, I am prompted to enter the password. Defeats the purpose of clicking on the box, no?
Thanks,
HenryHave you tried deleting the encrypted back up?
-
While installing new app prompting for Apple Id & Password
Hi,
Can someone help me out, I have created a new apple id and trying to install new apps(Games), it prompting for apple id & password. When I provide credentials pop up the following message "This Apple id hasn't used in iTunes store yet" .
What should I do now? Help is much appreciated. Thanks.There is no fee for creating an iTunes or App Store account. But, before you can download anything from the store, you need to associate your AppleID with a store account, which needs to include payment information. You are only charged anything if or when you download a for fee content item or app for the first time (re-downloads of purchased content other than audiobooks is free, as many times as you wish).
Your account will be active within moments of setting it up in iTunes, and it will work as long as your AppleID is valid (so indefinately - mine has been actice since the iTunes store first opened).
Just for clarity - an AppleID by itself is just an identifier and is used to create accounts (and subsequently log in and use) a number of Apple services. You use an AppleID to create accounts for the iTunes and App stores, for using these forums, as well as services like iCloud, iMessage and so forth. The AppleID is just the identification used to create the accounts, but the service accounts need to be created before they can be used. So you need to use your AppleID to create an iTunes store account before you can start downloading content from the store. -
3750X Prompts for Device/Enable Password Instead of Local Username/Password
I've got two 3750X switches that were built from a fairly basic template from my existing 3750/3560 switches. However, these new switches ONLY prompt for the device/enable passwords instead of the configured local username/password when connecting by console/telnet/ssh. Here's the config that I think is relevant, sans password strings. Only real difference is that the new switches are running an IOS 15.2 build, the 3750 switches are running 12.4, and the 3560 is currently running 15.0 (pending an update).
enable secret 5 string
username Administrator privilege 15 secret 5 string
line con 0
password 7 string
login local
line vty 0 4
password 7 string
login local
length 0
line vty 5 15
password 7 string
login
length 0
Any way to correct this?
Thanks!usually you need "login local" under all the vty lines in order to authenticate locally unless you use ACS server for authentication.
HTH -
Firefox is installed on my work computer (v16 on windows XP). When I go to any unsecure website, I get a request for a username and password from a proxy. I don't have one, so I press "cancel." I get the following message (I put the asterisks in):
"This Page Cannot Be Displayed
Authentication is required to access the requested web site ( *******-webproxy ). A valid user ID and password must be entered when prompted.
If you have questions, need assistance with your login information, or feel this is an error, please contact your corporate network administrator and provide the codes shown below.
Notification codes: (1, WWW_AUTH_REQUIRED, *********-webproxy)"
The website in the address bar is: http://*******-webproxy/B0000D0000N0001F0000S0002R0004/http://www.whatever.com/
This started after it upgraded (to which version, I don't remember). I also had another version of firefox installed to my "Local Settings" directory since I can't (un)install programs on the computer. That one was working fine until I upgraded to v.15 or v.16 (or maybe 14... I don't remember), and then I started getting the warning screen for an untrusted connection whenever I went to a secure website (https), I had to confirm a security exception, etc. And even then some pages only appeared as text.
I uninstalled that version, and then installed 17b4, and I'm back to the same problem as the original firefox: unsecure websites always seem to be redirecting through a proxy, and secure ones always tell me the connection is untrusted and I have to confirm an exception. I have "No proxy" selected in the network options. I tried v16 with the same results.
I would love to be able to just go to a website and not have to confirm security exceptions or get web proxy errors.
Internet Explorer works fine, btw.Not sure from your example but it appears that the address doesn't have a full domain, i.e., the part between http:// and the next / is not a valid internet domain name, e.g.,
http://sometext-webproxy/
In that case, it's probably something running on your computer, either as part of your security software, or as a Firefox add-on, or malware.
A standard diagnostic to bypass interference by extensions (and some custom settings) is to try Firefox's Safe Mode.
First, I recommend backing up your Firefox settings in case something goes wrong. See [[Backing up your information]]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, restart Firefox in Firefox's Safe Mode ([[Safe Mode]]) using
Help > Restart with Add-ons Disabled
In the dialog, click "Start in Safe Mode."
If you can access sites normally, this points to one of your extensions or custom settings as the problem.
To also disable plugins, you can try here:
orange Firefox button ''or'' classic Tools menu > Add-ons > Plugins category
Any change?
Maybe you are looking for
-
Authorisation request for this document was cancelled
Forum, I have an approval stage and template configured in SAP when a sales order is raised it prompts the user for authorisation. Whilst this is ok'd the order is placed in a 'Draft' status. Upon trying to add one particular order, i get the followi
-
Hi, My laptop was stolen and unfortunately it contained all of my itunes information, i have now purchased a new laptop and i was wondering if its possible to transfer my music from my ipod to my new laptop without losing all of my music. I have trie
-
Problem in header repeatition in all pages in print adobe forms
Hi all, Presntly I need to develop adobeform from abap with four different internal table data ( line items) and each having different header field values ( header details).And each internal table should display on different pages.
-
Packagemaker not truly replacing App bundle
I have a Packagemaker problem. It relates to the contents of the Frameworks folder. I have an app, and it has a certain amount of files in the Frameworks folder in the bundle. I have a installer built with Packagemaker that is intended to update the
-
DAB Radio on a Blackberry?
Hi, I've got a Virgin Lobster 700tv and I'm thinking of swapping it for a Blackberry. The Lobster enables me to listen to my fav. DAB radio station. Can any of the Blackberrys recieve DAB ? Cheers Rich Hill