Prompted for updates I already have?

Flash Player Version: 11.7.700.202 (persistent through several previous updates)
OS: Windows 7, 64 bit
Browser: Internet Explorer
Often videos and ads will stops, replaced with a grey and white exclamation mark, and eventually a notice that I need to update flash player. Clicking on them brings me to an update page, but I often find that it's for the update I already have when I check which version I have under programs on my computer. It can usually be circumvented by closing all the Internet Explorer tabs and reopening them, but it's been a significant disruption, and I was wondering if there was a way to avoid it. It seems to sometimes be caused by pages with lots of ads loading at once, but isn't solved until I've closed every tab at once (i.e. if I leave one open, then open a new one the problem persists), and sometimes takes multiple tries. I can't remember if attempting to update when I already have the update works.
Any suggestions would be much appreciated.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings.iTunes and APp Store and sign out and sing back in
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Backup and then restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
Last but I wold live it it before restoring as new
- Restore to factory settings/new iOS device.

Similar Messages

Browser prompting for update. Already on 7u45

I just got thrown into being the one to handle Java updates were I work when 7u45 came out so I am completely new to this world. We use static installs and then run uninstall scripts remotely. Here is the command we use for all of our Java installs.
"Java install file" /s /norestart /L c:\windows\temp\java7U45.log IEXPLORER=1 MOZILLA=1 ADDLOCAL=ALL JAVAUPDATE=0 JU=0 AUTOUPDATECHECK=0 JQS=0 SYSTRAY=0 EULA=0 STATIC=1
The 7u45 install works great until the uninstall of 25 (the last verision we updated to) runs:
msiexec.exe /x {26A24AE4-039D-4CA4-87B4-2F83217025FF} /qn/s /norestart
msiexec.exe /x {26A24AE4-039D-4CA4-87B4-2F83217025F0} /qn/s /norestart
After this is ran I get a pop-up requesting to update to the latest version of which we clearly have. If I hit "later" everything else works perfectly. I know that it is using 7u45 correctly as one of our programs breaks with 7u25. Also under IE tools/advanced it lists "Use JRE 1.7.0_25 for <applet>. I can fix this erroneous error by completely uninstalling/reinstalling 7u45 on individual computers but can't do this company wide. This error started on 11/15/2013 which I understand is the expiration of 7u25 and is happening on Windows XP and 7. Any help or ideas would be much appreciated.

I have found the solution and figured I would post it in case any one else has the same/simaliar issue. The problem was in a few reg keys. By running the following in a .reg file it repaired the problem for a win 7 machine:
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\MozillaPlugins\@java.com/DTPlugin,version=10.45.2]
"Description"="Java™ Deployment Toolkit"
"GeckoVersion"="1.9"
"Path"="C:\\Program Files (x86)\\Java\\jre1.7.0_45\\bin\\dtplugin\\npDeployJava1.dll"
"ProductName"="Java™ Deployment Toolkit"
"Vendor"="Oracle Corp."
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\MozillaPlugins\@java.com/DTPlugin,version=10.45.2\MimeTypes]
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\MozillaPlugins\@java.com/DTPlugin,version=10.45.2\MimeTypes\application/java-deployment-toolkit]
"Description"="Java™ Deployment Toolkit"
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\MozillaPlugins\@java.com/DTPlugin,version=10.45.2\MimeTypes\application/java-deployment-toolkit;deploy=10.45.2]
"Description"="Java™ Deployment Toolkit"
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Wow6432Node\CLSID\{CAFEEFAC-DEC7-0000-0001-ABCDEFFEDCBA}]
@="Deployment Toolkit"
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Wow6432Node\CLSID\{CAFEEFAC-DEC7-0000-0001-ABCDEFFEDCBA}\InProcServer32]
@="C:\\Program Files (x86)\\Java\\jre1.7.0_45\\bin\\dtplugin\\deployJava1.dll"
"ThreadingModel"="Apartment"
If running XP just take out the "wow6432Node" folder in each key.

HT4623 I can't update my 4s to 7.0 because itunes says i need the new 11.0.5 update. i already have it. Won't let me do the update

I can't update my 4s to 7.0 because itunes says i need the new 11.0.5 update. i already have it. Won't let me do the update

Hello Mshlanta,
Thank you for using Apple Support Communities!
iOS 7 requires iTunes version 11.1. If your software updates are not seeing the update for whatever reason, you can download and install it directly from http://www.apple.com/itunes/download/
Keep in mind the requirements to download iTunes 11.1:
Macintosh System Requirements
Mac computer with an Intel Core processor
OS X version 10.6.8 or later
400MB of available disk space
Broadband Internet connection to use the iTunes Store
And
Windows System Requirements
PC with a 1GHz Intel or AMD processor and 512MB of RAM
Windows XP Service Pack 2 or later, 32-bit editions of Windows Vista, Windows 7, or Windows 8
64-bit editions of Windows Vista, Windows 7, or Windows 8 require the iTunes 64-bit installer
400MB of available disk space
Broadband Internet connection to use the iTunes Store
All the best,
Sterling

Unable to stop Flashplayer 11.5 from prompting for update

Hi, I support about 3000 machines worldwide. We use Windows 7 x64, with IE10. In my base image I Installed Flashplayer ActiveX 11.5.502.146, using the full EXE installer and the switches -install -au2 (i do not want any updates done or users to get any prompts for updates). The MMS.cfg created using these switches shows 2 lines:
AutoUpdateDisable=1
SilentAutoUpdateEnable=0
and is located in the x64 path c:\windows\syswow64\macromed\flash
In the Flash Player settings manager, the advanced tab shows the radio button selection "Never check for updates (not recommended) is selected (this is greyed out because all of our users run under standard user permissions). Installation runs fine and the product works fine in IE, the problem I have is that my users are still prompted by the Update Adobe Flashplayer message on a weekly basis.
I looked at the admin guide for 11.5, and I believe my settings are right. Why am I still getting this prompt? Does mms.cfg have to be in the x86 path as well? Is there something with standard user rights as it relates to adobe updates? Should I install this from the MSI?
I can't update to 11.7 right now as we are getting ready to start rolling out my image and don't want to make changes at this time. I'm looking for any input on what I may be doing wrong that I continue to see update prompts. Thanks in advance for any information, and I'd be happy to provide additional info if I left out something.

See also http://forums.adobe.com/thread/1194289
And https://bugbase.adobe.com/index.cfm?event=bug&id=3545918

How much does it cost to get the album artwork for albums I already have?

How much does it cost to get the album artwork for albums I already have?

here are the costs for a new battery:
The costs for a new MBP are substantially higher than a battery.
Ciao.

I need to restore my iPhone 5 but an update I already have appears.

I need to restore my iPhone 5 but when I click on restore, an update to iOS 6.1.4 appears and my phone is already at the latest iOS update. I have limited internet usage and trying to update to an update I already have installed will make me go over my usage as the update is almost 1000mb.

Go to a friend's house and use their wifi, which will not
be charged to your wireless usage. Or a coffee shop. Or
someplace else with publicly available wifi.

ITunes is saying I have available downloads for stuff I already have downloaded.

A few days ago I backed up about 100 or so apps to iTunes that I had originally downloaded on my iPad (4th Generation, 32GB).
The odd thing is iTunes is saying that I have downloads waiting for those apps. Is there any way to get iTunes to recognize I already have them downloaded so I can get rid of the downloads icon in the top-right of iTunes 11?
I could download them again, but I have a DSL connection and I'd rather not waste my bandwidth on that.

Sounds like it's been awhile since you've last sync'd (sunc? lol) your device with iTunes - and sounds like you've downloaded the updates for these app's on your device already. Once you sync, that number will go away - or you can let them all download...all it will do is ensure the same version is stored in iTunes that is on your phone...same happens to me when I don't sync for awhile and get like 10 updates over 2 weeks on my phone...just plug your phone/ipad/ipod/whatever in, sync it, and that number SHOULD disappear...otherwise, just let iTunes download the newest versions of whatever it's downloading.
Post your success/progress/failure after please

Reader 11 - Disable prompt for updates when installing?

I have used the Customization Wizard to customize all of our Acrobat 8,9,10,11 installs of both Pro and Std without any problems. But when I customize the Reader 11 install so that it does not download updates, the setup program still prompts me with the question about updating. I have tried 11.0.0 and 11.0.2 with similar behavior and would like to make sure the installs are consistent across the organization by not prompting the installer with this question. (Yes, I have verified the Disable Product Updates is checked.)
How can I banish this dialog from the Reader install?

I would ask why you need to allow installation in UI mode, but assume that you have valid reasons for that.
Since you are using CW, you can open Direct Edit view in CW, go to InstallUISequence table, find SelectARMMode record and change it's condition to be NEVER

Q5 prompts for update 10.3 but still claims 10.2 is "latest version"

So, I have a Q5, and it has been a bit of a hazzle from day one.
I really looked forward to the update of the software to 10.3, because I hoped it would solve some of my issues with this phone. And I finally got the prompt today in the Hub, that "a new update is available".
But when I tried to update the phone from the phone itself, it didn´t find any updates. I go to Softwareupdates in my System Settings menu, and click the "check for updates"-button. I get a message in return that claims I "have the latest version" and it says 10.2.1.
I connect with Link, and click on Softwareupdates here.
Same message. I still have the latest version, and it still says 10.2.1.
Then I try (while still connected to Link) to use my browser to go to http://www.blackberry.com/update. Browser gives me the answer that "the page could not load due to too many redirections" (or something like that), indicating that the page loads in loops.
I´ve checked my settings in the browser, it allows everything necessary for the page to load, and every other page loads perfectly. But not the udate-page on BB.
I´ve also tried two other browsers, all with settings properly set. Get the same message.
So; what do I do?? How do I update my Q5?

I still haven´t found a solution to this problem. And my Q5 still won´t update its software.
I´m stuck on 10.2.1, and it continues to insist that I´ve got "the lates software available".
Why did the notification in my Hub about a new update, disappear? I can´t find it anywhere.
Using Link to update doesn´t work either.
And using BB´s own webpage for updates doesn´t work either. Same error message pops up that came last time I tried.
Nothing works to get this update, and I´m pretty frustrated.

Gutterball Bowling Game Keeps Prompting For Update Every Week

Hey Adobe,
I am running Firefox 16 with Adobe Shockwave Player, the latest version. About every 7 days, I get a prompt to update Shockwave Player when I play Gutterball 3D at this site:
http://www.shockwave.com/contentPlay/shockwave.jsp?id=gutterball&refCode=&brand=ag
There is no evidence of virues or malware on my computer and my Windows XP is up-to-date. Both Shockwave Player and Flash Player are the latest versions, so I don't know if it is something with the game or a bug. Feel free to test. Thanks!
Jack

Hi,
As per the information and details provided by you, to solve the Outlook 2010 password problem, please follow these steps: -
Firstly, you try to
change the profile.
Open Control panel/Mail/Select the profile and click Properties.
Select the mailbox and click the
Change button.
When inside the profile you will see tabs at top for
connection and security.
Please make sure you have selected
Negotiate authentication, and have unchecked the box that states
Always prompt for login credentials.
Then check if you are using
HTTP to connect with exchange, if so uncheck this and apply the changes.
Close Outlook if open and reopen Outlook.
I hope this information will be helpful for you.
Thanks and regards
Shweta@G
Hi Goyal,
Thank you very much for your reply. The Outlook settings are the same as you described. We do use HTTP to connect to Exchange. I unchecked it and see what happens tomorrow. but just FYI. All Outlook has the same settings with HTTP connection checked. Only
two specific accounts have the credential issue.
Will update you tomorrow.
Thanks,
Grace

HT4623 I go to settings and general. But, there is no option for updates. I have had my phone for 2 years and never updated and now I need to. Any advise??

Trying to update my iphone. I go to settings then general. But, there is no option for updates.. My iphone is 2 years old and I have never updated it but I need to now to get some of my apps working again. Help??

wvgerb wrote:
there is no option for updates..
That's because you've never installed iOS 5 or 6

SSH still prompting for password after authorized_keys have been set

Hello,
Configuration;
OEL5
2 nodes
I have done the following;
su - oracle
mkdir ~/.ssh
chmod 700 ~/.ssh
/usr/bin/ssh-keygen -t rsa # Accept the default settings.
exit
su - oracle
cd ~/.ssh
cat id_rsa.pub >> authorized_keys
scp authorized_keys rac2:/home/oracle/.ssh/
exit
su - oracle
cd ~/.ssh
cat id_rsa.pub >> authorized_keys
scp authorized_keys rac1:/home/oracle/.ssh/
exit
su - oracle
ssh rac1 date
ssh rac2 date
ssh rac1.localdomain date
ssh rac2.localdomain date
exec /usr/bin/ssh-agent $SHELL
/usr/bin/ssh-add
Also made the following in my /etc/ssh/ssh_config on both nodes then restarted
RSAAuthentication yes
PubkeyAuthentication yes
when I execute
ssh rac1 date
I am still being prompted for the password
This is making my install of Clusterware (pre-install check) fail with error;
"user equivalence check failed for user "oracle""
Can anyone give me an idea of the next step to make it no longer prompt for a password?
thanks,
Steve

I just ran into this. I had to delete the "oracle" user and readd it. I could talk from box 2 to 1, but could not talk from 1 to 2. After I deleted and readded the oracle user on the second box it worked just fine.

Prompted for update but no update available

Turned on my laptop this morning and a box came up saying there was a newer version of Skype. I clicked on not now and opened up Skype. When to check for update and it said that I had the latest. Was the popup box a version of that virus going around acting like it is a valid update? I think that I last heard of it taking the form of an Adobe update.

6.20 is NOT the latest version. The currently latest version is 6.21.
You cannot rely on Check for Updates. It can take some time before this option starts working in the "next-last" version. I'm not saying that this is right, but it is how this works now in Skype.

Cannot remove notification for app updates I already have.

I had four apps which needed updating, so I updated them. Now all of my updates are completely updated but I can get rid of the little red number on the App Store logo. I'm on 8.1.2. Please help.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings.iTunes and APp Store and sign out and sing back in
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Backup and then restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
Last but I wold live it it before restoring as new
- Restore to factory settings/new iOS device.

Lightroom warning about Camera Raw update I already have

When trying to open a RAW picture into Photoshop from Lightroom 2.2, it is giving me the following warning:
This version of Lightoom may require the Photoshop Camera Raw plug-in version 5.2 for full compatibility. Please update the Camera Raw plug-in using the update tool available in the Photoshop help menu.
Thing is, I've already installed Camera Raw 5.2. If I open up the About Lightroom window, it tells me that I'm using Camera Raw 5.2.
Do I need to put a copy of the Camera Raw plugin somewhere else than where it is?
I'm using Lightroom 2.2, Photoshop CS4 Extended, on a MacPro w/ Leopard 10.5.6.

The version of ACR indicated in LR's help/about is the version of the RAW engine internal to LR, and not the version of ACR you actually have installed for Photoshop.
What does CS4 / Help / About Plug-ins / Camera RAW say the version is? And are there two versions of Camera RAW listed in the About Plug-ins.
Maybe there are multiple versions of ACR installed and LR is finding an old one, or perhaps LR is opening a file that was originally opened in a prior version of ACR/LR and LR can tell this by looking at the XMP or the LR database so is warning it may not be compatible even though it probably wouldn't matter. I don't have a Mac nor CS4, yet, so can only guess.

Prompted for updates I already have?

Similar Messages

Maybe you are looking for