Prompts for save chages even if it is an EXE

Hi All
I have a program which I made into an exe but when the program closes the front panel to exit, it will prompt to "Save changes".
Some items on the panel are repositioned when it is running and I do not need to save the changes. But I dont understand why it will ask this even if the program is turned into an EXE
Any ideas on how to stop the "save changes" prompt from comming up?

I haven't tried this but try adding a revert vi method in your clean-up/shut down code since you don't want to save the changes anyway- tossing em out seams sensible.
Whoops revert method won't work(not available in run-time not writable while running)
Hmmmm....
Jeff

Similar Messages

Prompting for SAVE as the document with Digital signatures in 8 or above

When i am doing digital signature on Adobe PDF 8 and above , it is prompting to SAVE AS the document.I am accessing the PDF documents from my document management application and signing on that.So Save as wouldnot work for our case.It should save on the default existing location.How to solve this issue?

Thank you very much for your responses. The final post on the forum at the link you provided explains the issue. It appears to be some sort of conflict with the Windows Explorer document previewer that is causing this. Whenever I am previewing the document I am working with in the Explorer, I cannot save changes. As soon as I preview a different document, the changes can be saved without any problems. In the interest of providing further information so that a more permanent solution can be found, I am running Windows 7 and have had this problem with Acrobat 9 and X. Files are being saved locally. Unfortunately, I do not have the savvy to tell you what kind of server.

Process multiple files prompts for "save" at every image

Hi, I am trying to use Elements 10 to convert Panasonic RAW files to JPEGs for web use. The batch runs, but prompts for a "save" location at every file. I have reinstalled Elements, reinstalled the Camera RAW update, and have ensured I have ownership of source and destination folders (in Windows 7).
I have tried several folders, set up test folders etc. and nothing seems to work. Does anyone know what I am doing wrong? Its been ayear or so since I did this, but it used to work. TIA.

Try selecting all thumbnails in camera raw (left hand thumbnail strip) then click the open image button (bottom right) to open them in PSE Editor. When the images appear in the project bin use:
File >> Process Multiple Files
Use the source dropdown for Opened files
Choose a separate folder for destination
Then set your jpeg quality/size.

PSE9: prompted for "save as" during batch processing??

In PSE 9, my process multiple files seems to have stopped working. I am trying to batch convert some CR2 files to Jpeg. When I try to run it I get prompted during the convert operation to "save as" for each individual file (and the jpeg isn't an option). This used to work, anyone know what changed?
Thanks for the help,
Jamie

Raw files work best as already open images in the Editor.
Try using open files (File à Open) then select your batch of raw files using Shift+click or cmd+click to select individual files. Wait for Camera Raw to open and click the button Select All (top left) then apply your saved default settings to all the selected images. Keep them all selected, choose 8 bits/channel and click Open Images (towards bottom right) to send the selected images into the Editor.
After the Editor opens go to the top menu bar click File >Process Multiple Files.
Set the dropdown for your source to Opened Files then for the destination, check same as source or a new folder.
At the bottom of the dialog under File Type choose the jpeg quality from the dropdown e.g. Max, High, Medium or Low.
Click OK and leave the program to run (this can take a bit of time as raw files are usually large). When finished close the Editor and return to your folder to see your Jpegs next to your raw files. Or go to your new destination folder if preferred.

Safari prompting to save download even though unchecked.

Hi,
I have u disabled 'Always prompt before downloading' and yet Safari keeps on prompting me to 'save' the download or 'run' them. also, if i select 'save' it would ask for the location. very annoying... any suggestions?
Neerav

.
Message was edited by: Barry Hemphill

Turn Off Distiller Prompting for Filename on MAC like you already can on windows.

I've posted about this before, but with no useful reaction. There is a documented feature in the Windows Distiller, that would be just as useful on mac, but doesn't exist there. In the Adobe documentation, it's called "Turn Off Prompting for Filename".
In short, I'd like a way to stop the MAC distiller from showing dialogs that are not needed when controlling it externally, when the options 'ask for pdf file destination' and 'view pdf when using distiller' are turned on by the user, like this is already possible in windows.
Below is a copy of my original post, with more details.
Distiller brings up dialog while running from applescript
Arnt Witteveen - 06:08am Dec 19, 2005 Pacific
Hi,
I've read DistillerAPIReference.pdf (and DistillerParameters.pdf) from the developer documentation, and I have not found a way to do what I need: 'override' the distiller setting to ask for the destination filename and to open the pdf in acrobat when it's done. On windows, this does not seem to be a problem, it's documented under "Distiller API for Windows", in the paragraph "How to Turn Off Prompting for Filename". Even better, when sending the command line "/V /O outfile.pdf /J joboptionsfile inputfile" using DM_CMDLINE and WM_COPYDATA, it doesn't seem to bring up the dialog or open it, which is just what I need (even though I see no reason why it doesn't).
On Mac however, there is no such thing (in fact, the documentation for controlling distiller in this way on mac is very short: 5 mostly empty pages, explaning only that you can start and stop it and pass it a file to distill).
So, how do I stop the mac distiller from showing dialogs that are not needed when controlling it externally, when the options 'ask for pdf file destination' and 'view pdf when using distiller' are turned on by the user?

sorry, but the 2880x1800 is hardware; in fact what makes non-optimized sites look (relativly) ugly is that to upscale the graphics to the apparent resolution of everything else each pixel is represented by 4 pixels, and as you know being in graphics, upscaling pictures is generally results in ugly.
Back to my point, there's no software to make the display lose 75% of its pixels; you'll either have to use another machine and/or wait for sites to optomize their graphics for the retina displays...which may or may never happen depending on the sites awareness/closeness with Apple's technology

Office Web App Prompting For Credentials Externally Only

We deployed an office web app server and it works great internally, but whenever we try to access documents externally, we are prompted for credentials. Even if we put our credentials in, we always get a 401 forbidden error. Also note that
we can access the hosting/discovery page fine internally, but not externally. Any help is appreciated.

Hi,
According to your description, I think this issue is more related to SharePoint, I suggest that you could post it to
SharePoint forum.
Regards
Starain
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

OEPE Causes Eclipse Not to Prompt for Workspace

After install the OEPE 1.1.1.7, I am no longer prompted for the workspace to use on startup. The prompt for workspace setting is checked. If I uninstall the plugin, I am then prompted for the workspace. Any ideas on how to get eclipse to prompt for the workspace even if OEPE is installed. If I reinstall the plugin, I am no longer prompted for the workspace.
Thanks!

Before dropping 1.1.1.6 into the dropins directory, I was using the update method. Now, I do use Genuitec's Pulse to manage my eclipse installation. I would no think that would cause the difference in our findings, but who knows. I seem to remember--I apologize for not remembering clearly!--that 1.1.1.6 worked event with Pulse, yet I can not verify as I can not seem to pull a previous version from the OEPE update site.
I did see some hits in Google that seemed to suggest that the install location was being set to the default somewhere in a plugin that wasbeing loaded early in the chain. Unfortunately, I am not in a position to delve into this to debug the issue. When I get freed up a bit, perhaps I will be able to research more.

Outlook prompts for password

Hi
We are in a migration of Exchange 2007 to Exchange 2013, so for the moment it is a coexistence.
I migrated 2 mailboxes to Exchange 2013. After the migration, outlook started prompting for a password by starting outlook. Once the password has been entered, outlook works fine. But that happens only if outlook cache mode is active. If I disable cached
mode, outlook starts without prompting for a password.
So I deactivated cached mode, deleted the ost file and again activated cached mode. Now Outlook starts without prompting for a password, even if cached mode is active.
Deleting the ost file for 1 or 2 users is fine, but not if there are 200 more mailboxes to migrate.
I cannot reproduce the behavior with test mailboxes, created after Exchange 2013 has been installed into the organization. All these mailboxes can be migrated without password prompts.
By the way, I found different posts about the authentication settings for outlook anywhere. I found on Exchange 2007 that the ClientAuthenticationmode was Basic, while NTLM on Exchange 2013. So I changed it to NTLM as well. Everything is still working.
I am going to migrate 2 more mailboxes, and I will see tomorrow if the problem still exists.
Any Suggestion?
Regards
Peter

Hi Peter,
I also found many similar issues had been solved by setting to NTLM for Servers. Outlook will pass the authentication via Windows. It is the solution.
Thanks
Mavis
Mavis Huang
TechNet Community Support

After upgrading from Vista to Windows 7, Firefox lost all my stored passwords, never asks to save them, even though I've checked box for saving them, have made sure history is not cleared, and am not in Private Browsing.

In Windows 7, Firefox 8.0 does not ask to save passwords, and does not save, them, even though I checked the box to save passwords. I have confirmed that clearing history is not on and that I am not in Private Browsing. This is so frustrating, it almost makes me want to go back to Vista. I have looked at all the suggestions to fix the problem in "Help" and have followed the suggestions, and none of them help.

I have the TX2 1012NR and its can upgrade just fine! Here is a few recommendations "only if u have the HP Upgrade program disks"
If you have them you can install a clean copy and delete everything... Do not use the use me first disk included because it prompts you to install an older BIOS.... Just use the windows 7 upgrade disk and start the process. The clean install clears your entire drive but does not void your warranty! When you use the use me first disk after the install it actually loads everything else needed to get you up in running. The touchscreen driver and the HP Mediasmart programs will have to be downloaded from the HP support site. Once again its recommended that if there were any programs installed delete them do not try to update them! This causes issues and countless errors. Specifically with touchscreen drivers etc uninstall them before installing the ones from HP support. I found this was not the easy way to do it but the best way... I also recommend that when doing any sort of BIOS update that you remove your Battery and leave it connected to a power cord only! Last but not least if you really mess up and its under warranty... Send it to HP they will set it back up to factory defaults under Windows Vista with the more up to date BIOS installed. I hope my information helps! Sure you might loose some programs but in the end your computer runs faster and smoother because all the programs installed are made for Windows 7.... Also they did release the Touch Pack for download from the Microsoft website here is a link telling more about the features and benefits and how to get it as it is a totally free download...
http://windowsteamblog.com/windows/b/windows7/archive/2009/05/27/introducing-the-microsoft-touch-pac...
Microsoft Link for download:
http://www.microsoft.com/downloads/details.aspx?FamilyID=b152fadd-82e4-4ddb-a46a-aebe49944428&displa...

How do I prevent auto-login? I never EVER save passwords, yet FF logs me into gmail without prompting for login.

I never save passwords - never have, never will. Using evil IE, Gmail works correctly in that it prompts me for ID and password for each new browser instance. Yet when I open gmail with FF, it goes straight to my inbox without prompting for ID or password. I use gmail in "always secure" mode. Cookies are enabled, of course, just did not expect my password to be saved and loaded from a cookie. How can I rectify this problem?
== This happened ==
Every time Firefox opened

I have this issue too. I have never asked to be "always signed in" with gmail, yet sometimes it will sign me in automatically when I open my Firefox browser. I try clearing everything I can clear ( even though I've said NOT to save my password or sign in automatically), but it still happens. It's not even consistent - sometimes it will happen and sometimes not. This is very frustrating. I share my computer and I do not want automatic sign in anytime! >:o(

Firefox is not prompting to save password for specific user on specific site. How can I correct this?

I am using saved passwords feature. The site in question is a common webmail site. I have more than one account for this site. Usernames and passwords for each account were stored in Firefox 'Remember Passwords' feature. I unintentionally deleted one entry from the dropdown list that is displayed when I go to the site's login page. Now, when I log in to this account, Firefox will not prompt to save the password. If I display my saved passwords list, there are entries for the other accounts on this site, but none for the user account in question. The Saved Passwords 'Exceptions' list is empty. How can I get Firefox to re-prompt to save the password for this user on this site? (Note: When I speak of 'user', I am not referring to user account on the PC or a specific Firefox user profile.)

I am using Avast free version. Today I removed the LAN cable out of the 24 port switching hub and plugged directly into the router port. Now the program runs fast when checking for emails. Looks like all the emails are showing up. I do have other computers plugged into the switching hub with no problems. The hub is brand new. My thinking is the cable connector might be to blame. I will try re-crimping the wires. As for now, things are running good. I will keep investigating. Thanks

Prompting a "Save As" dialog for an accepted mime type

Hi ,
I am using the following code to prompt a "Save As" dialog bod for an xls file:
response.setHeader("Content-disposition","attachment; filename=test.xls");
This does work, it prompts the save as dialog box with the name "test.xls" if i click on save. However if i click on open, it displays an error saying the file could not be found.
Any idea how to specify a custom file name for an accepted mime type?
Thanks in advance

Ok let me try & be more clear.
I have a JSP page. In this page there is an "Create Excel" link. When this link is clicked, the JSP dynamically creates the data. Then the following code:
response.setContentType("application/vnd.ms-excel");
response.setHeader("Content-disposition","attachment; filename=test.xls");
This causes the file save dialog box to be created. This dialog box has "open" & "save" options.
When the save option is clicked, the user is prompted to save a file named test.xls. However if the user clicks on the "Open" dialog box, then the file is not opened,i get an error message saying the file does not exist.
If i dont specify the
response.setHeader("Content-disposition","attachment; filename=test.xls");
Then the file save dialog box displays a default filename which is the same as name of my servlet. This works for both Open as well as save options.
I hope i have not confused you further..:)
Please help!

Automatically prompt to save PDF when Print Preview for Purchase Order?

We recently upgraded to EP7.
I have an end user that does our PO's.
She swears up and down that she used to be able to go into any given PO, be it new or existing, and click on the print preview button. She says when she did this she was prompted to save or open the file.
She is set to PDF Preview when doing a print preview of the PO.
When we first upgraded the system, it was broken. When she tried to do this it would give you a Page Cannot Be Displayed error as in unable to find the page. We learned that there was an issue with name resolution within the system. We fixed this and now she can view the files as PDF when doing a print preview.
But she still claims it did not used to work like this that when she went to preview she would be prompted to save or view which worked great for her because she could click save, save it to her computer, and then email it to whomever she needed to send it to.
Seems clear to me that that when you do PDF Preview that an SAP browser session is created and sent to an web site (internal to SAP of course) to view the PDF. How can I tell SAP to give me the option to view or save?
For now the user is repeating the output when she needs to reprint another copy of the PO.
I should also say that we use Free PDF Creator. After setting her default printer to this, she says that now when she creates a new PO, it is working like before. So its possible that the prompt was the one from PDF Creator.
The user says she swears she could simply print preview would allow her to save local. I never saw it for myself prior to the upgrade.
Anyone seen this before or can offer any clues? Is there away to issue output at print preview?

How did you fix 'page cannot be displayed' error?
It looks like issue was at browser/pdfreader side.

Prompt for parameters, but save password

I have a report that prompts the user to select a date range for query results. I am using a 3rd party program to view the report. Under Report Options, I have disabled "save data with report" so that it prompts for the dates each time the report is opened. The problem is that is also prompts for the password to the database. Is there a way to set up the report to ask for a date range, but not ask for the password each time? The third party program does not prompt for the password, so when trying to view the report, it just errors out. I am new to CR, so I've only being doing this for a couple of day. Thanks.

Hi Dustin,
You said you are using 3rd party program ? What is this program ? Is it developed using .net or Java ? If this is java based of .net based then you can pass user login information through coding.
Otherwise it is not possible to stop asking user credentials when you refresh crystal reports.
Thanks,
Sastry

Prompts for save chages even if it is an EXE

Similar Messages

Maybe you are looking for