Pronvince (Estado) 3 letters

I am buying something in iphone 4 (apple store) and appears this message:
"Please enter at most 3 letters or numbers for estado"
This is not possible. I´m from Brasil and the select box in iphone just permit 2 letters.
How can I proceed?
Anyone could help me?

This is an unbelivable case! The error occurs almost a year ago and nobody in Apple Store Brasil did nothing to correct it. It's an obvious translation error, because we, in Brasil, use "Estado", not "Province" (Argentina use Province). Anybody knows how to bypass this error to BUY in Apple Store Brasil?

Similar Messages

HT1351 Some of the songs I bought from iTunes will not sync to my iPhone. They show up on my phone, but the letters look faed and I can't play them. How do I fix this? I tried restoring my iPhone and it didn't work.

Some of the songs I bought from iTunes will not sync to my iPhone. They show up on my phone, but the letters look faed and I can't play them. How do I fix this? I tried restoring my iPhone and it didn't work.

Sorry, I meant the letters look "faded" not faed.

Dunning costs and Dunning letters

Hi to All,
Any body can help me out, In this regard.,
In the report of Dunning cost(Sendiing Dunning letters to customers)., Customers are showing but company code was not showing.How can i get the company code for those customers.
And one more thing was customer dunning letter cost also showing differently for Customers(for one customer $ 2 and for other itwas variated to $2.50 likewise).
Where I can see the dunning letter cost per customer.
Thanks If in advance,
Dara

Hi,
Line items should reach minimum number of days, referring to the due date of net payment, to reach a certain dunning level.
In FBMP check you dunning interval. If line item has reached interval maintained for 2rd and 3rd level then items will not be dunned.
Also check dunning levels for your dunning procedure in FBMP.
If you find no problem with dunning settings then, activate additional log for the dunning run to identify exact reason for the problem.
Thanks!
Raju

If e-mail is moderately long if I delete a letter or digit the cursor disappears, have to recover it, all deleted letters or digits appear at end of e-mail

If I type a moderately long e-mail (I haven't counted the letters/digits to determine how long), then suddenly letters won't appear. If make a typing errors, and backspace over or delete the error/s, the cursor will disappear. It's not anywhere in the body of the e-mail (or anywhere else I've noticed). I can get it to reappear by highlighting every word in the e-mail, then undoing that.
All the letters/digits I've deleted reappear at the end of the e-mail--but only in the e-mail received (by the recipient). If I save the e-mail as a draft, when I look at the draft, the I'll see the deleted letters/symbols at the end of the e-mail. If I click on edit, they disappear. But recipients see all of them, regardless of whether I edit the e-mail or not.
The last time I asked this "question", I was told to update. That was probably 5 updates ago. There has been no change.
I don't know if the problem persists in safe mode because I have forgotten to switch into safe mode every time I use TB. Sometimes I remember to run TB in safe mode but don't have reason to type a long e-mail.
I'm really tired of this problem.
OS is win 7 pro w/service pack 1.

May I ask why? Have you learned that that specific problem is solved in a pre-release version? So far I've upgraded once on your advice, now I've upgraded again to 31. Problem's still there. Unless I'm told that the problem's been solved for sure in a latter version, I'm not going to upgrade because sometimes the upgrades bring problems w/them for a low tech user. I don't want to chat, etc., I just want to be able to send and receive e-mails.
I'm still working with the security software people re: some continuing issues w/FF.
I'd like to spend more time doing my work, or communicating w/friends, not dealing w/software problems.
Is there anyway of my finding out what, if any update, includes whatever is needed to solve my specific problem? I use Win7 Pro, SP1, 3.40 Gz processor, 3.19 Gb usable RAM, 64 bit OS. I don't know what other information is needed.

Máquina de Estado

Bom dia pessoal,
estou com dúvidas na implementação em uma máquina de estado(ME).
Estou fazendo uma aplicação que busca adquirir dados, startando com um trigger, analisar estes dados e mostra-los o resultado gráfico da análise. Bem, para complementar tenho ainda que salvar os dados e gerar um mini relatório em HTML. Todas estes blocos de código estão prontos, porém nõ consigo implementa-lo em uma máquina de estado.
Esta aplicação busca construir uma waterfall, orbita e BODE da partida de um motor.
Abaixo segue como visualizei a ME pela primeira vez:
Uma máquina de estado contendo:
Case 1: Parte de aquisição - Daqmx express adquirindo de 4 canais com trigger no primeiro canal. Constante direcionando para Case 2
Case 2: Parte da análise - FFT e FRF para cálculos e análise dos dados, preparando-os para apresentação. Constante direcionando para Case 3
Case 3: Parte da Apresentação - montagem dos arrays de dados e apresentação dos mesmos nos componentes gráficos. Constante direcionando para Case 1
Loop em paralelo à ME para salvar os dados e construir o relatório.
Dúvida: O fato é que se estivermos no Case de aquisição, o programa estará "preso" na espera da ocorrência de uma trigger, o que impossibilita de manipula-lo caso o motor não gere a mesma. Ex. o motor estiver parado.
Possível solução: baixar o timeout.
Contra: Gerará dados vazios que não sei como manipula-los para evitar que sejam inseridos na análise.
Dúvida: Como posso a qualquer momento executar uma rotina para construção de waterfall?
Possível solução: Utilizar a rotina no loop em paralelo para isto com os dados de uma variável local.
Dúvida: Como posso mudar a seleção de um próximo case, visto que o arranjo feito inicialmente é ciclico:aquisição=>analise=>apresentação=>aquisição=>....?
Possível solução: Criar um case default "em branco" que espera um novo destino.
Contra: Como fazer isto se preciso que ele fique no ciclo somente até eu decidir que é para sair do mesmo.
Dúvida: Como fazer com que possa parar este processo e fazer com que o programa continue rodando para startar outro ciclo de aquisições?
Possível solução: Inserir um loop externo à ME, parando o loop interno à ME, estria retornando ao loop externo e esperando a nova inicialização.
Dúvida: como relacionar uma estrutura de eventos com uma máquina de estados?
Se alguém estiver disposto a enviar um código exemplo para exemplificar a resolução destes problemas(os códigos do labview são muito básicos), a NI poderia lançar mão de exempos de aplicativos mais complexos para exemplificar a interação e resolução de problemas como este.... agradeço....ou se tiver um e-mail de suporte para enviar o código e discutirmos o mesmo...também é possível. Infelizmente não posso postar o código no site.
Agradeço de antemão a alma caridosa que estiver disposta a encarar esta bomba.
Um abraço.
Leonardo de S. Cavadas
Maintenance Engineer and Inspection - Bureau Veritas do Brasil
Engineer Metallurgist with emphasis in Advanced Materials
Technologist in Computer Science

Dúvida: O fato é que se
estivermos no Case de aquisição, o programa estará "preso" na espera da
ocorrência de uma trigger, o que impossibilita de manipula-lo caso o
motor não gere a mesma. Ex. o motor estiver parado.
Possível solução: baixar o timeout.
Contra: Gerará dados vazios que não sei como manipula-los para evitar que sejam inseridos na análise.
Você poderia usar uma estrura Produtor/cosumidor de mensagens (tem um template do LV de exemplo). Desta forma, soh trataria os dados se alguma informação fossa adicionada à fila de mensagens.
Esta estrutura de Produtor/Consumidor de mensagens te permitiria também de separar as funções de tratamento de eventos com as funções de anàlise e interação com o processo.
Dúvida: como relacionar uma estrutura de eventos com uma máquina de estados?
A estrutura de eventos deve ficar dentro de um case da màquina de estados que trata ações do usuàrio. Uma espécie de idle.
Dúvida: Como fazer com que
possa parar este processo e fazer com que o programa continue rodando
para startar outro ciclo de aquisições?
Possível solução: Inserir um loop externo à ME, parando o loop interno à ME, estria retornando ao loop externo e esperando a nova inicialização.
Você poderia colocar o processo dentro de um While e verificar a cada iteração se deve continuar ou não.
Eh complicado dar sugestões sem ver o codigo ou um sinoptico do processo. Espero que tenho ajudado um pouco.
Dica: se você postar em inglês, muito mais pessoas poderão te ajudar. Acredito que os membros mais ativos e experientes deste forum não falam português, com sorte espanhol... Pode demorar um pouco mais para se redigir a mensagem, mas vale a pena.
Salut,
Rasputin
LV7.1 <> W2K

How do I change the lettering size on my HP Photosmart 5512?

I need to know if there is any way to change the size of the lettering when I print something? When I print the size on the paper comes out jumbo.. How do I make it normal size so I am not wasting so much paper? I have an HP Photosmart 5512 series printer and I am using windows vista

Does it print double when you print a certain application like email or web pages or does it do it on everything ?
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

I am using Adobe XI Pro and in various parts of the document there is brown / biege lettering when on the document it shows as black. My printer guy has been in and checked it out top to bottom and that part is fine. I have tried to print the same docum

I am using Adobe XI Pro and in various parts of the document there is brown / biege lettering when on the document it shows as black. My printer guy has been in and checked it out top to bottom and that part is fine. I have tried to print the same document and it comes out fine. Any ideas ? Using Windows 7 Service Pack 1

Sorry my bad. I have tried to print the same document on another printer and all the formatting is fine.

I am trying to use the sudo tmutil disable local on my macbook air but when it asks for my password, I cannot type it in- the letters simply do not appear on my screen-- any solutions??

I am trying to free up space on my macbook air by stopping local backups. I type sudo tmutil disablelocal and it prompts me for my passsword. When I try to type in the password it wont type-- i.e the letters do not apear when I type them-- any suggestions??

Hi there...
For security do not appear in code, but once you hit ENTER it has been passed in Terminal ...careful to write the code properly and kaps lock

VPN Client Accounts: "Username and passwords must consist of numbers or letters"

I am configuring a username in the VPN Client Accounts withing a Cisco WRVS4400N.
The username I must enter is in the form: [email protected]
Unfortunately, when I input that username, the system informs me that I cannot have anything other than numbers an letters.
The instructions from my University require us to use that FULL email format.
http://net-services.ufl.edu/provided_services/vpn/anyconnect/legacy-install.html
Is there a way to fix this?

Any solution for this? How can I pass in a blank domain parameter so I am automatically logged in instead of receiving the log-in dialog asking for the domain?

Problem with USB travel keyboard on Windows 7 (some letters become a number)

Hi
I have an USB Travel Keyboard with trackpoint and touchpad. Have used for years in XP.
Now I have bought a new computer, using Windows 7 and Asus P6X58D Premium motherboard.
After installing Windows 7 I noticed that when I press some keys I get a number instead of a letter.
I have managed to install drivers for the USB travel keyboard. And can enter the place where I can change speed of TrackPoint etc....
Now some weird stuff:
The keyboard actually work if I e.g. enter Internet via "Asus Express Gate".
(This is a feature with the motherboard which enables me to run some small numbers of applications without having to start windows, thus enabling superfast access to Internet etc.)
If I let Windows 7 start, then some keys/letters only show numbers.
To me it sounds weird if keyboard only works in "Asus Express Gate" applications and not in when I e.g. use Internet or any text editor in Windows 7.
Maybe there is a settings in BIOS that is set automatically when entering "Asus Express Gate", that I might have to set manually to make the USB keyboard work while in Windows 7 (64bit) ???
I have looked in the BIOS UI without any luck...
Any suggestions?

Before you spend money, see Javascript Error! Error number: 45 error string: Objects is invalid line: 387, Line 428

View Letters of Credit - Tcode

Dear Friends,
Sincerely speaking, I am very much new to this FORUM & SAP Environment. I would like to know the Tcode to - VIEW Letters of Credit issued (both closed and still open items) for verification purpose.
Can any one help me out to get the t-code? Please....
Kindly bear with me, if the questions are at basic level.

Dear Friends,
Any idea? Please let me know.

I spilled water on my laptop and my "i", "j" and "k" letters don't work on my laptop. However my main problem is that my password contains an "i" so i am locked out of my computer. Any ideas how I can get around the password and login.

I spilled water on my laptop and my "i", "j" and "k" letters don't work on my laptop. However my main problem is that my password contains an "i" so i am locked out of my computer. Any ideas how I can get around the password and login. I tried the method where you go into single user mode and type in commands, however that method uses some of the letters that are not working on my laptop.

You didn't mention which version of OS X your running but there are password reset utilities provided OS X: Changing or resetting an account password (Snow Leopard and earlier) - Apple Support or OS X: Changing or resetting an account password - Apple Support
Alternately you can use an external keyboard to log in and change the password. Make a backup if you don't have one, it's likely that your problems aren't over. If that water continues to migrate downward and fries the logic board your macbook will be toast.

My Macbook Pro(2010) only writes in capitol letters, can´t write numbers and only starts up in safe mode once a week!

Hey guys!
So my Macbook started acting weird a couple of months ago. All of a sudden i could only write in capitol letters and i couldnt write any numbers. Every time i tried to write a number, i would only get the symbols instead such as " "#¤%&/ " etc. I tried restarting it and the computer booted in safe mode and still had the same problem as before. I decided to read around some forums and someone suggested " zapping the PRAM" which i did and it fixed the problem for about 1-2 days and then it was back to the normal.
I decided to turn in my computer to an authorized Apple technician to take a look at it and after a few days i got a phonecall saying that he had run tests for 6 hours but couldnt figure out what was wrong with the computer, he just knew that something was wrong. When i got the computer back it was working perfectly but the weird thing is that every now and then the same thing would happen with the keyboard and the weirdest part is that it usually stopped working on fridays, once a week.. Anyways i have done all i can, now im turning to you guys for some much appriciated help.
Any suggestion on how to fix this problem of mine?

Actually it sometimes gets a little further, the display will dim and the pointer will appear and then whoop it will turn off. if i do a verbose start up, it will finish all the steps, the white screen will appear and dim and then it will turn off.

HELP ASAP!! Lettered password tried first time, caused my ipod to be unrecognized by iTunes and only solution is restore, which I don't want to do!

I put in a lettered passcode recently and now it won't work anymore and iTunes could not let me type in the password and only solution is to restore it. I really do NOT want to restore it at all because I highly value the info, saved pics and links, especially the music I saved which is only on my ipod, not anywhere else, not even my computer. I am a music person and I work and live for music, and recently I saw a new kind of passcode which can be lettered instead of a 4-digit passcode, so I went ahead with it, which made me comfortable. Until I realized as soon as I clicked the top button (which just put it to sleep or off) and when I click it on, it says it has to be plugged to iTunes. I thought I would have to get home to type in my lettered passcode to get in, which I did. But when I plugged it in, there's no password needed or anything like that. iTunes won't even recognize my iPod, and the solution is to restore it, which I refuse to do, because all my work is in this iPod of mine I've had since nearly 4 years now.
PLEASE HELP ME ASAP!!!!!!! I can't live without music, I know it's hard to believe but it's true. Is there any other way I can get my iPod to work without having to restore it and lose everything I've worked for in it?? None of it is saved to any other computer or technogical device. Everything is in my iPod. Please help!! I am struggling each day without music, it's impossible, I miss music and I need to hear it, and the iPod is the only way for me to hear as of for now because I am deaf/hard-of-hearing and my hearing aids are broken, so I use the ipod everywhere I go to listen to music on my earphones/headphones, I can't carry my computer anyways, lol. Please may any of you help me solve this problem?? I will be eternally grateful! THANKS SO MUCH!!

If you are unable to enter the passcode into your device, you will have to restore the device to circumvent that passcode.
Is the music purchased from iTunes? If it is you can contact iTunes support and ask them to allow you to re-download the music that you purchased from iTunes.
Also, do you sync the device regularly? When syncing an iPod Touch/iPhone a backup file is made. That backup file doesn't contain your music but it does contain your address book, application data, pictures, notes, etc. After restoring your device, you can try restoring from the last backup that was made of your device so you will not have to start over completely from scratch.
Hope this helps!

Hi. I opened iPhoto and, suddenly, it tells me " WHAT IPHOTO LIBRARY DO I WANT TO USE?" but i had a iPhoto library. When i search on my Pictures, i have the file IPHOTO LIBRARY but it appears on a dim letters and i can not open it.

Hi. I need some help on the following problem. I opened iPhoto and, suddenly, it tells me " WHAT IPHOTO LIBRARY DO I WANT TO USE?" but i had a iPhoto library. When i search on my Pictures, i have the file IPHOTO LIBRARY but is was not the icon on it i previously remembered and it appears on a dim letters and it can not be opened ... How can i recover it??

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Pronvince (Estado) 3 letters

Similar Messages

Maybe you are looking for