Prooblemas

Holaa tengo un pequeño problema con mi telefono.!! es que no me acepto la contraseña pin.. !
tengo el tlf bloqueado. luego me pidio la contraseña.! puk... y pues le di muchas veces y puse numereos que no eran.. ahora me dice no se puede cambiar el pin Pin BLOQUEADO Qee hago.?

Cuál es su código por defecto? Puk
If you have an answer to your question then please click “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit.
BB 8700 -> Bold 9000 -> Curve 8520 -> Bold 9700 -> Curve 9320 -> Bold 9900 -> BlackBerry Z10 + PlayBook 64 GB Wi-Fi

Similar Messages

  • Xml parser  configuration prooblem

    Hi
    The application I am running is trying to use the Following XML parser
    "org/apache/xerces/framework/XMLParser" . BUT i get a NoClassDefFoundError
    when i run it. I tam not sure which jar i have to use.
    Please can u suggest me ...
    1 > HOW to change the Default XML parser used by an application ...
    a > BY modifying some File provided by SUN for eg .
    b > BY adding JVM parameter before running app.
    2> List of Jars which contain this Class
    Basically i know that XML parser used by an APP can be changed .
    Please can u suggest a solution using point 1a ) or 1b
    Thanks
    sbelur

    According to the javadocs
    http://xml.apache.org/xerces2-j/javadocs/xerces2/index.html
    you want to use this:
    org.apache.xerces.parsers.XMLParser
    I suggest you study Xerces some more, or check out the examples that you get with the source package.

  • Hyperion Analyzer 7.0 installation prooblem

    <p>Hello Guys,</p><p>      I tried installing HyperionAnalyzer 7.1, I installed the tomcat that comes along with it andthe installation was successful but when I click the start Analyzerserver the tomcat window starts up and then stops automaticallyalso when i try to launch analyzer through browzer it says page notfound.</p><p>      Can you guys please guide meas to what I might have done wrong, everything seems to be fine asper the installation document. I have tried installing essbase olapfirst and then analyzer and also only analyzer but sameproblem.</p><p> </p><p>Thanks in Advance,</p><p>Nitin</p><p> </p>

    I have found out the path in is on patch 7.1.0.8 path in directory repository in file sqlscripts.zip.I have created the repository from this files and repository works again!No more help is needed.

  • Install prooblems

    Hello,
    I have had a horrible thing happen to me! my old computer broke and I got a new one, however my programs are not on my new computer and when i try to re-download them there is an error message saying that the files could not extract the files
    I have the CS6 Suite Web Premium Student edition, i can download the files but i can't install nor extract them
    Thanks

    Hello,
    I have had a horrible thing happen to me! my old computer broke and I got a new one, however my programs are not on my new computer and when i try to re-download them there is an error message saying that the files could not extract the files
    I have the CS6 Suite Web Premium Student edition, i can download the files but i can't install nor extract them
    Thanks

  • I have read the posts regarding the split screen prooblem which I have. I have read the posts and I do not have fox splitter add-on. Is there another way I can eliminate split screen?

    I have firefox installed on two computers. The desktop does not show the split screen, but the laptop does. I have checked the posts and I do not have fox splitter add-on but still get the split screen when I click on a second site.

    Right-click that bookmark and select '''Properties''', then un-check the preference for '''Load this bookmark in the sidebar''', and then click Save.
    Using JavaScript buttons on web pages for "Bookmark this Page" causes that preference to be selected when saving the bookmark in that manner. So, don't use those buttons, use the "Bookmark this Page" feature that is built into Firefox instead.

  • Automatic Reboot Prooblem

    Greetings. I have a problem that has been occurring since 10.5.3 that I keep hoping will resolve itself with each incremental system update - but so far, no luck
    Whenever I Shut Down at the end of the day, after about 5 seconds, the computer reboots. I then have to sit and wait for the boot to finish and then repeat the Shut Down process. It only reboots once. Never more than that. I cannot understand what would make it reboot once, but not continuously. I am unable to find any solution to this extremely annoying problem.
    Any thoughts or suggestions would be greatly appreciated.
    Cheers. - Frank

    That is not something a software update is going to fix, sorry.
    And it could be you are adding insult to injury and the disk directory and file system are only the worse for those shutdown attempts.
    Disk Warrior, Clone backups, drivers, finding offending device (can be USB cable, device, printer driver, almost anything, even USB hub) that is interfering.
    Disk Warrior would be a start.
    So would clean install, though I suspect even though no mention, you tried that.
    Install 10.6.6 on a newly minted and formatted drive.
    Try a new test user account.
    Safe Boot and see if it is okay (but only after insuring the drive is 200% A-OKAY with Disk Warrior and Disk Utility both).

  • Prooblem with Cable Sync of Address Book to Touch

    I have discovered recently when syncing my Address Book to Mobile Me that is does not include any text from the Note field. I have also discovered that using a cable to sync my Address Book with an iPod Touch does not include the Friend or Assistant fields which I often use for password clues and other miscellaneous information for which there are no obvious fields. I quite often customize these fields to more meaningful names. When these fields first failed to carry across to my Touch I resorted back to the original field names in case this was causing the problem. To no avail I am afraid. Has anyone else had the same problem? Or am I doing something incorrectly? Help please!

    I also had this problem when adding directions to a relatives house into the note field in the address book. The newly added information was not included when i synced my ipod touch.
    To have the note field of my contact in address book sync to my ipod touch I had to open contacts on my ipod, choose the contact, click edit, press "add field", scroll to "note", type a couple letters, and press save.
    when I synced the ipod the note field was updated with the directions.

  • I purchased an iMac MC309LL/A model A1311 21.5" All in one computer. I purchased it 8/28/11 and about 2 months ago it started powering down. I called for support and a Apple Customer Support, I did what they said and now it wont turn on at all.

    I purchased an iMac MC 309LL/A model A1311 21.5" All in one computer on 8/28/11. The computer stated to shut down on me every once in a while when I was working on it. I called Apple customer support and a rep walked me through deleting all of my cache files saying it was the prooblem. She then had me do a re-install with the installation disc. After doing that she said to turn my computer off then back on and the computer would want to run some updates an to let them run. I was told to call back if there were anymore problems. The computer turned on for a couple minutes then shut down again and won't turn back on at all now. I took it to the Apple store and they told me it was the main board that delivers power to the computer and it whoulld cost about $550 to replace. I have had this computer for 1 1/6 year and hardly use it. My tech told me the same thing happened to his. Doesn't this mean the equipment could be faulty?
    Who keeps track of how many of these are having the same problem and when should there be a recall. I have always used Dells at work. The one I have is 6 years old and works great. I have Compaq laptop at home that is almost 7 years old. I have never had a problem like this before and I can't believe that I spent$1300 for a computer that crashed after 1 yr 6 months. What's worse is that it is my first major Apple product other than my iPod Shuffle.

    Sorry to hear of your problem, but any hardware in a computer can fail - that includes the hard drive, the logic board, etc, etc. Fortunately, it usually doesn't happen that soon; however, I've read of hard drives failing within 6 months.
    So, since you did not purchase the extended Applecare Protection Plan (3 years coverage), you will need to make a decision to repair or sell it as is. I would always purchase 3 year coverage for an all in one or a laptop because repairs are expensive and at least I'd be covered for 3 years.
    We can't speculate on whether there should be a recall or not; these forums are for user to user assistance with technical problems. In your case, there is nothing we can help with since you've already gotten a diagnosis.

  • Error compiling movie.  I/O Error.

    Hello.
    Im not sure if i should have posted in the hardware section.
    I have done some reaserch on this problem but haven't really got the solution.
    It doesnt matter what format i export it always gives me this error. With h264 and some else, its a bit different too.
    - Source File: C:\Users\SEMPER~1\AppData\Local\Temp\Untitled_1.prproj
    - Output File: C:\Users\Kristjan\Desktop\Sequence 01.mp4
    - Preset Used: YouTube KW
    - Video: NTSC, 480x360, 30 [fps], Progressive
    - Audio: AAC, 64 [kbps], 48 kHz, Stereo
    - Bitrate: VBR, 1 Pass, Target 1,55, Max 2,29 [Mbps]
    - Encoding Time: 00:00:00
    3.12.2009 0:53:45 : Encoding Failed
    Cannot open "C:\Users\Kristjan\Desktop\Sequence 01.mp4" file for writing. Please check the output filename and file permissions (if it already exists) and then try again.
    - Source File: C:\Users\SEMPER~1\AppData\Local\Temp\Untitled_2.prproj
    - Output File: C:\Users\Kristjan\Desktop\Sequence 01.avi
    - Preset Used: NTSC DV
    - Video: 720x480, 29.97 [fps], Lower, Quality 100
    - Audio: 48000 Hz, Stereo, 16 bit
    - Bitrate:
    - Encoding Time: 00:00:00
    3.12.2009 0:54:47 : Encoding Failed
    Error compiling movie.
    I/O Error.
    - Source File: C:\Users\SEMPER~1\AppData\Local\Temp\Untitled_3.prproj
    - Output File: C:\Users\Kristjan\Desktop\Sequence 01.avi
    - Preset Used: NTSC DV
    - Video: 720x480, 29.97 [fps], Lower, Quality 100
    - Audio: 48000 Hz, Stereo, 16 bit
    - Bitrate:
    - Encoding Time: 00:00:00
    3.12.2009 0:58:04 : Encoding Failed
    Error compiling movie.
    I/O Error.
    - Source File: C:\Users\SEMPER~1\AppData\Local\Temp\Untitled_4.prproj
    - Output File: C:\Users\Kristjan\Desktop\Sequence 01.avi
    - Preset Used: Custom
    - Video: 720x480, 25 [fps], Progressive, Quality 100
    - Audio: 48000 Hz, Stereo, 16 bit
    - Bitrate:
    - Encoding Time: 00:00:00
    3.12.2009 1:08:37 : Encoding Failed
    Error compiling movie.
    I/O Error.
    - Source File: C:\Users\SEMPER~1\AppData\Local\Temp\Chemistry, Copper_6.prproj
    - Output File: C:\Users\Kristjan\Desktop\Youtube.avi
    - Preset Used: Custom
    - Video: 720x480, 25 [fps], Progressive, Quality 100
    - Audio: 48000 Hz, Stereo, 16 bit
    - Bitrate:
    - Encoding Time: 00:00:01
    3.12.2009 1:28:42 : Encoding Failed
    Error compiling movie.
    There are alot of errors about my hard drive in the event viewer aswell. I have 2 hard drives. 
    The device, \Device\Harddisk1\DR1, has a bad block.
    The driver detected a controller error on \Device\Harddisk2\DR2.
    even my cd rom has a bad block, The device, \Device\CdRom0, has a bad block.
    I defrag my drives regulary.
    My PC ,I use the "system information" option that win 7 has :
    OS Name Microsoft Windows 7 Ultimate
    Version 6.1.7600 Build 7600
    Other OS Description Not Available
    OS Manufacturer Microsoft Corporation
    System Name SEMPERFI-PC
    System Manufacturer System manufacturer
    System Model System Product Name
    System Type x64-based PC
    Processor Intel(R) Core(TM)2 Duo CPU     E8400  @ 3.00GHz, 2997 Mhz, 2 Core(s), 2 Logical Processor(s)
    BIOS Version/Date American Megatrends Inc. 0503, 14.07.2009
    SMBIOS Version 2.5
    Windows Directory C:\Windows
    System Directory C:\Windows\system32
    Boot Device \Device\HarddiskVolume2
    Locale Eesti
    Hardware Abstraction Layer Version = "6.1.7600.16385"
    User Name SemperFi-PC\Semper Fi
    Time Zone FLE Standard Time
    Installed Physical Memory (RAM) 4,00 GB
    Total Physical Memory 4,00 GB
    Available Physical Memory 2,10 GB
    Total Virtual Memory 8,00 GB
    Available Virtual Memory 5,47 GB
    Page File Space 4,00 GB
    Page File C:\pagefile.sys
    I/O:
    0x00000000-0x0000000F Direct memory access controller OK
    0x00000000-0x0000000F PCI bus OK
    0x00000010-0x0000001F Motherboard resources OK
    0x00000020-0x00000021 Programmable interrupt controller OK
    0x00000022-0x0000003F Motherboard resources OK
    0x00000040-0x00000043 System timer OK
    0x00000044-0x0000004D Motherboard resources OK
    0x00000050-0x0000005F Motherboard resources OK
    0x00000061-0x00000061 System speaker OK
    0x00000062-0x00000063 Motherboard resources OK
    0x00000065-0x0000006F Motherboard resources OK
    0x00000070-0x00000071 System CMOS/real time clock OK
    0x00000072-0x0000007F Motherboard resources OK
    0x00000080-0x00000080 Motherboard resources OK
    0x00000081-0x00000083 Direct memory access controller OK
    0x00000084-0x00000086 Motherboard resources OK
    0x00000087-0x00000087 Direct memory access controller OK
    0x00000088-0x00000088 Motherboard resources OK
    0x00000089-0x0000008B Direct memory access controller OK
    0x0000008C-0x0000008E Motherboard resources OK
    0x0000008F-0x0000008F Direct memory access controller OK
    0x00000090-0x0000009F Motherboard resources OK
    0x000000A0-0x000000A1 Programmable interrupt controller OK
    0x000000A2-0x000000BF Motherboard resources OK
    0x000000C0-0x000000DF Direct memory access controller OK
    0x000000E0-0x000000EF Motherboard resources OK
    0x000000F0-0x000000FF Numeric data processor OK
    0x00000290-0x00000297 Motherboard resources OK
    0x000003B0-0x000003BB Intel(R) X38/X48 Express Chipset PCI Express Root Port - 29E1 OK
    0x000003B0-0x000003BB ATI Radeon HD 3850 OK
    0x000003C0-0x000003DF Intel(R) X38/X48 Express Chipset PCI Express Root Port - 29E1 OK
    0x000003C0-0x000003DF ATI Radeon HD 3850 OK
    0x000003F8-0x000003FF Communications Port (COM1) OK
    0x00000400-0x0000041F Intel(R) ICH9 Family SMBus Controller - 2930 OK
    0x00000480-0x000004BF Motherboard resources OK
    0x000004D0-0x000004D1 Motherboard resources OK
    0x00000800-0x0000087F Motherboard resources OK
    0x00000D00-0x0000FFFF PCI bus OK
    0x00009400-0x0000940F Intel(R) ICH9R/DO/DH 4 port Serial ATA Storage Controller 1 - 2920 OK
    0x00009480-0x0000948F Intel(R) ICH9R/DO/DH 4 port Serial ATA Storage Controller 1 - 2920 OK
    0x00009800-0x00009803 Intel(R) ICH9R/DO/DH 4 port Serial ATA Storage Controller 1 - 2920 OK
    0x00009880-0x00009887 Intel(R) ICH9R/DO/DH 4 port Serial ATA Storage Controller 1 - 2920 OK
    0x00009C00-0x00009C03 Intel(R) ICH9R/DO/DH 4 port Serial ATA Storage Controller 1 - 2920 OK
    0x0000A000-0x0000A007 Intel(R) ICH9R/DO/DH 4 port Serial ATA Storage Controller 1 - 2920 OK
    0x0000A400-0x0000A40F Intel(R) ICH9 Family 2 port Serial ATA Storage Controller 2 - 2926 OK
    0x0000A480-0x0000A48F Intel(R) ICH9 Family 2 port Serial ATA Storage Controller 2 - 2926 OK
    0x0000A800-0x0000A803 Intel(R) ICH9 Family 2 port Serial ATA Storage Controller 2 - 2926 OK
    0x0000A880-0x0000A887 Intel(R) ICH9 Family 2 port Serial ATA Storage Controller 2 - 2926 OK
    0x0000AC00-0x0000AC03 Intel(R) ICH9 Family 2 port Serial ATA Storage Controller 2 - 2926 OK
    0x0000B000-0x0000B007 Intel(R) ICH9 Family 2 port Serial ATA Storage Controller 2 - 2926 OK
    0x0000B080-0x0000B09F Intel(R) ICH9 Family USB Universal Host Controller - 2934 OK
    0x0000B400-0x0000B41F Intel(R) ICH9 Family USB Universal Host Controller - 2935 OK
    0x0000B480-0x0000B49F Intel(R) ICH9 Family USB Universal Host Controller - 2936 OK
    0x0000B800-0x0000B81F Intel(R) ICH9 Family USB Universal Host Controller - 2937 OK
    0x0000B880-0x0000B89F Intel(R) ICH9 Family USB Universal Host Controller - 2938 OK
    0x0000BC00-0x0000BC1F Intel(R) ICH9 Family USB Universal Host Controller - 2939 OK
    0x0000C000-0x0000CFFF Intel(R) X38/X48 Express Chipset PCI Express Root Port - 29E1 OK
    0x0000C000-0x0000CFFF ATI Radeon HD 3850 OK
    0x0000D000-0x0000DFFF Intel(R) ICH9 Family PCI Express Root Port 6 - 294A OK
    0x0000D800-0x0000D8FF Marvell Yukon 88E8056 PCI-E Gigabit Ethernet Controller OK
    0x0000E000-0x0000EFFF Intel(R) ICH9 Family PCI Express Root Port 5 - 2948 OK
    0x0000E400-0x0000E40F Standard Dual Channel PCI IDE Controller OK
    0x0000E480-0x0000E483 Standard Dual Channel PCI IDE Controller OK
    0x0000E800-0x0000E807 Standard Dual Channel PCI IDE Controller OK
    0x0000E880-0x0000E883 Standard Dual Channel PCI IDE Controller OK
    0x0000EC00-0x0000EC07 Standard Dual Channel PCI IDE Controller OK
    0x0000FFE0-0x0000FFEF AS0MMTY9 IDE Controller OK
    Drives:
    Drive C:
    Description Local Fixed Disk
    Compressed No
    File System NTFS
    Size 149,05 GB (160 040 443 904 bytes)
    Free Space 57,80 GB (62 065 405 952 bytes)
    Volume Name
    Volume Serial Number 44C64C64
    Drive D:
    Description Local Fixed Disk
    Compressed No
    File System NTFS
    Size 149,05 GB (160 038 907 904 bytes)
    Free Space 53,30 GB (57 233 891 328 bytes)
    Volume Name Windows
    Volume Serial Number 728D93DE
    Drive E:
    Description CD-ROM Disc
    Drive G:
    Description CD-ROM Disc
    Disks:
    Description Disk drive
    Manufacturer (Standard disk drives)
    Model SAMSUNG HD160JJ ATA Device
    Bytes/Sector 512
    Media Loaded Yes
    Media Type Fixed hard disk
    Partitions 1
    SCSI Bus 1
    SCSI Logical Unit 0
    SCSI Port 5
    SCSI Target ID 0
    Sectors/Track 63
    Size 149,05 GB (160 039 272 960 bytes)
    Total Cylinders 19 457
    Total Sectors 312 576 705
    Total Tracks 4 961 535
    Tracks/Cylinder 255
    Partition Disk #1, Partition #0
    Partition Size 149,05 GB (160 040 448 000 bytes)
    Partition Starting Offset 32 256 bytes
    Description Disk drive
    Manufacturer (Standard disk drives)
    Model WDC WD1600BB-00GUC0 ATA Device
    Bytes/Sector 512
    Media Loaded Yes
    Media Type Fixed hard disk
    Partitions 1
    SCSI Bus 0
    SCSI Logical Unit 0
    SCSI Port 0
    SCSI Target ID 0
    Sectors/Track 63
    Size 149,05 GB (160 039 272 960 bytes)
    Total Cylinders 19 457
    Total Sectors 312 576 705
    Total Tracks 4 961 535
    Tracks/Cylinder 255
    Partition Disk #0, Partition #0
    Partition Size 149,05 GB (160 038 912 000 bytes)
    Partition Starting Offset 1 048 576 bytes
    Multimedia shows me these codecs:
    video:
    c:\windows\system32\iyuv_32.dll Microsoft Corporation OK C:\Windows\system32\IYUV_32.DLL 6.1.7600.16385 52,50 KB (53 760 bytes) 14.07.2009 3:06
    c:\windows\system32\msrle32.dll Microsoft Corporation OK C:\Windows\system32\MSRLE32.DLL 6.1.7600.16385 15,50 KB (15 872 bytes) 14.07.2009 3:18
    c:\windows\system32\msvidc32.dll Microsoft Corporation OK C:\Windows\system32\MSVIDC32.DLL 6.1.7600.16385 37,50 KB (38 400 bytes) 14.07.2009 3:18
    c:\windows\system32\msyuv.dll Microsoft Corporation OK C:\Windows\system32\MSYUV.DLL 6.1.7600.16385 24,00 KB (24 576 bytes) 14.07.2009 3:06
    c:\windows\system32\tsbyuv.dll Microsoft Corporation OK C:\Windows\system32\TSBYUV.DLL 6.1.7600.16385 14,00 KB (14 336 bytes) 14.07.2009 3:06
    c:\windows\system32\xfcode~1.dll Not Available Xfire video codec [XFR1] OK C:\Windows\system32\XFCODEC64.DLL 1.0.0.40405 26,89 KB (27 536 bytes) 30.11.2009 21:33
    audio:
    c:\windows\system32\imaadp32.acm Microsoft Corporation OK C:\Windows\system32\IMAADP32.ACM 6.1.7600.16385 21,50 KB (22 016 bytes) 14.07.2009 3:18
    c:\windows\system32\l3codeca.acm Fraunhofer Institut Integrierte Schaltungen IIS Fraunhofer IIS MPEG Layer-3 Codec OK C:\Windows\system32\L3CODECA.ACM 1.9.0.401 79,50 KB (81 408 bytes) 14.07.2009 3:22
    c:\windows\system32\msadp32.acm Microsoft Corporation OK C:\Windows\system32\MSADP32.ACM 6.1.7600.16385 23,50 KB (24 064 bytes) 14.07.2009 3:18
    c:\windows\system32\msg711.acm Microsoft Corporation OK C:\Windows\system32\MSG711.ACM 6.1.7600.16385 14,50 KB (14 848 bytes) 14.07.2009 3:18
    c:\windows\system32\msgsm32.acm Microsoft Corporation OK C:\Windows\system32\MSGSM32.ACM 6.1.7600.16385 28,50 KB (29 184 bytes) 14.07.2009 3:18
    I downloaded and installed the Win7 codecs by Shark. Because...there are any other codecs available for win 7 ?
    Tell me if need any more info..which u probably do.
    If there are any better forums for this kind of problem then please tell me.
    I hope we can fix this prooblem.
    I think i haven't said my motherboard. Its P5E3 PRO. It has EPU engine and it turns off the hard drive when its idle...Premiere pro and all the sytem files are installed on my C drive which is like the main drive. On D drive i keep my music, downloads and stuff. I think it can turn of both drives then idle, but mostly it turns off D drive, I think. I have a new motherboard and i haven't got the hang of it how it shuts them down.
    But i think this really isnt a problem.
    Thanks in advance.

    Serious hardware problems!
    Go for a fresh install of OS & programs, but be prepared to first check your disks with a utility from the drive manufacturer (WD and Samsung). You may need new disks.
    Great to include these details, but for readability I suggest you include these as an attachment instead of in the text. It may scare people off reading all that detail.

  • Spotlight does not stop indexing

    I need help: Just started the brand new MacPro 2x 2.66. The long desired spotlight (I run osx 1.3.9 before) does not work. Spotlight never stop to index. It runs and runs. If I add the hard drive to privacy in the system preferences it stops, but as soon as I get it back it just continues to index. So I've never been able to use Spotlight. Another harddrive in the machine (one without just data, no system) is swiftly indexed. But as soon as I have the main HD open for indexing, Spotlight continues to index for ever.
    The harddrive causing the prooblem has previously been used in another computer under 1.3.9
    Any ideas for fixing this would be much appreciated.
    MacPro 2x 2.66 Mac OS X (10.4.8)

    Hello,
    I'm seeing the same kind of problem. Here are the symptoms:
    -Some or all data from a Mac previously running 10.3, is migrated to a Mac using 10.4. The Migration Assistant is used.
    -Spotlight will continuously re-index, stop for a brief period, and repeat, either by itself, or when a search is attempted.
    -Erasing the indices with mdutil -E, running fsck, fixing permissions and stopping/starting Spotlight doesn't resolve the problem.
    -Excluding the migrated user directory will stop the madness. I.e., other users and shared directories like Applications, are searchable, and Spotlight will stop the continuous re-indexing.
    -Recreating the user directory from scratch, and then copying in data from a backup, may once again start the madness.
    The big question is, what, exactly, causes the indexing cycle?
    The client affected by the problem is very disappointed, and had cause to wonder "how is this any better than Vista? I would have been better off with a Windows PC". I really need to resolve this, but I'm not sure of the best way to get Apple Tech involved with this bug.
    Many Macs   Mac OS X (10.4.8)  

  • Can't connect a printer to Mac OS 10.4.10

    Hi
    I swapped over computers from my iMac flat panel (OSX Tiger) to a G4 digital audio running Tiger 10.4.10. I am having trouble connecting a printer. I have 2 printers a Laserjet 4100n and a HP PSC 1402 MFC. Both these printer worked fine on the iMac but when I installed GIMP 5.1.3 and the drivers for the 1402 Print centre found the printers but came up with this error messege:
    An error occurred while trying to add the selected printer:
    server-error-service-unavailable
    Does anyone know what this means? I've tried the HP forums and the Apple forums as well.
    Thanks in advance Johnmac

    Hi,
    I'm having exactly the same problem since more than 4 months !
    One day, all my printers disappaered from my printers list, and when I try to add them again, I get the message : "server-error-service-unavailable".
    All the printers are network printers, so the connections are already Ethernet connections.
    I tried resetting the printing system, but it still doesn't work.
    In the "share" preferences, I'm not able to check the "Printers share" box, nore in the firewall settings... The boxes just don't want me to check them ! I'v got no prooblem with the other options, only with those concerning printers share... Can that be the reason why I can't add any printer ?
    Thank you very much !

  • Error in XML file generation :240416

    Hi All,
    I am facing problem with XML file generation.
    Steps:
    1. Source-->Query Transform and maintained Nested Stucture
    2. Generated XML fomat from query transform
    3. Created XML format file
    4. Make XML format as target and given XML generate path
    source table-->Query(nested structure)-->XML Format
    when I validate the job no errors found.
    Note: XSD file is in Local mechine and XML file will be generated in SFTP.
    Prooblems:
    1. Getting below error
    The input XML refers to file which is not part of the definition of this XML Schema format. Check your schema and XML files,
    and check that the root element in the XML file corresponds to the root element in the XML Schema
    Validate your XML Schema using external schema validators (found at w3.org)
    Thanks,
    Deepa

    Hi,
    I think issue Because in your Query Transform output the Root element is Query and XML target is having some other root element. Make the Query trasform name similar to root element and try...

  • BPM and alert message

    Hi, all
    - in transaction ALRTCATDEF, i have specified dynamic text for my alert category
    - in my BPM there is control steps
    - In the bpm, i have created a variable ERR of <b>string</b> type in a container
    - in the container operation i have assigned my variable ERR with ST./p1:MT_STRING
      ST is contained:
         <MT_STRING>
          text
         <MT_STRING > 
          (for example)
    - in the control step, i have specified my alert category
    - the alert message i have specified with this text: error &ERR&
    But i have recived mail with only 'error'. The content of my variable ERR did not display.
    When i use the variable of <b>integer</b> type, this prooblem does not appear.
    Thanks,
    Lyudmila DRuzeva

    Hi,
    check this alternative way of populating alerts
    (with long texts)
    /people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi
    you can also send it in normal send step
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • Access to the time capsule harddrive through internet.

    Hi everyone,
    I bought a few months ago a Time capsule and it is working perfeclty as a network and hard drive under. It is connected to the router unde a  bridge mode.
    My prooblem is coming when I want to access through internet with my Macbook  to my time capsule as it is not possible but according the time capsule specification it is possible to have acces to the harddrive through internet. So it means I have to change soemthing in the setp up on the router (P-2812HNU-F1) or in the time capsule.
    Can anyone help me to set up the time capsule and the router  accordingly to be able to have acces to the harddrivethrough internet? 
    Thanks

    Have you tried using BTMM and iCloud method?
    That is the only method Apple provisioned on the TC and apple network.
    http://www.apple.com/au/support/icloud/back-to-my-mac/
    If you are having issues you need to tell us more..
    Sometimes it seems the TC in bridge will not work.. if that is the case, then you must see if you can rearrange your network so the TC is the main router.
    Or you need to use a manual access method.
    This requires using a static public IP (Check with your ISP.. this is by far the best method) or use a dyndns service.. and port forward 548 TCP to the TC.. there are thousands of posts and youtube videos with the info. Just look up "remote access time capsule"
    This is a good post to start with.
    http://gigaom.com/2009/05/14/access-your-time-capsule-over-the-internet/

  • No video displayed when making movies using Vado third generation

    I have windows xp with sp3 installed. I am able to make movies using the create movie function in vado central. However, when I play back the video (this is a wmv file), only the audio is available. The screen is blank. Any suggestions?
    Thank you

    Hi
    Yes I can play audio on time line no prooblem..

Maybe you are looking for