Proper bandwidth for a remote standby db

We'd like to setup a remote managed stdby db on 8.1.7.4 solaris 2.8. Our line will be 768kps with bursts up to T1.
Is that enough? If not, what would be the optimal?
Jason

1) I'm assuming this is a dedicated connection-- you're not going to have database replication traffic and email attachments fighting for the same bandwidth.
2) It depends on your rate of archive log generation, the size of your archive logs, and your tolerance for how stale your standby can be. You need to look at your average and maximum archive log generation and figure out whether you can move the archive logs over the wire fast enough to satisfy your staleness tolerance.
Justin
Distributed Database Consulting, Inc.
www.ddbcinc.com

Similar Messages

  • Bandwidth for remote Lion Profile Manager server

    Hi all,
    Can anyone shed some light on what kind of upstream bandwidth you'd need to have for a remote Lion Profile Manager server to manage your Macs?  I'm not thinking about accessing home directories over the Internet, just the configuration profiles.
    Thanks in advance for any input,
    Chris

    Hi
    64kbps for sites with approx 3-5 users or  using ADSL lines with 512kbps
    Regards
    Divya

  • Min.Internet bandwidth for SAP clients with Windows Terminal Services (RDP)

    Dear all,
    what is a minimum/recommended Internet bandwidth for client who are using SAP client with RDP (SAP client is connecting directly via RDP session to remote SAP server).
    regards
    GN
    Edited by: Grzegorz Niecka on Aug 4, 2011 10:36 AM

    Hi GN.......
    It is recommended to have 1 Mbps speed of Internet in order to connect SAP Client from its destination to server if you are using Terminal server or VPN.......
    If you still not getting proper connectivity you may increase it to 2 Mbps........
    Regards,
    Rahul

  • How to calculate network bandwidth for dataguard 11.2

    Hi all,
    have a customer who needs to setup a new data guard environment in release 11.2.0.2. Primary site will be in Italy, standby site will be in New York.
    He would like to know the network bandwidth between primary and standby site needed to obtain the maximum performance in redo transport with or without compression option.
    I found a lot of threads and docs indicating some formulas but none of them explained how to:
    - calculate network bandwidth on a rac system (having a single instance standby database)
    - calculate network bandwidth in case of use redo transport compression
    - calculate cpu consumption if using redo transport compression
    Could you please give any advice?
    A.M.

    Hi,
    customer made ma a lot of technical question just like the following:
    - which are the main factors determining the 30% overhead indicated in the network bandwidth calculation
    Required bandwidth = ((Redo rate bytes per sec. / 0.7) * 8) / 1,000,000 = bandwidth in Mbps
    - how much bandwidth will I gain if I apply redo transport compression and why redo transport compression and why usually the gzip utility gives me 5X less and oracle compression gives me a maximum of 50-60% of compression even if it uses the same engine of zlib compression as indicated below?
    Data Guard redo transport compression uses the same zlib compression engine at level 1 as gzip -1. To estimate the compression ratio you can achieve using Data Guard redo transport compression, first compress an archived redo log file with gzip:
    $ gzip -1 <archive redo logfile>.arc
    Then use the gzip --list option to explicitly display the compression ratio:
    $ gzip --list <archive redo logfile.arc>.gz
    Note: Use gzip version 1.3.3 or later. Refer to www.gzip.org for the latest information on gzip.
    Could anyone give me any direction?
    Thank you
    AM

  • Looking for a remote app

    I am looking for a remote app for my windows computer at work so I can control my music. I have Remote from my mac to use with iTunes at home and thats great. But now I was wondering do they have anything like that for windows I use windows media player. Thanks so much

    Correction from my last message-
    Are you looking for a way to control the music from your PC to Mac as in remote desktop, or are you looking for a way to access (play, delete, share) your music?
    If its the first choice, see my last post.
    If its the second choice, you can turn on Home Sharing in iTunes.
    Go to Advanced>Turn on Home Sharing
    You'll have to login with an Apple ID, and do the same thing on your other computers.
    For more information on Home Sharing, visit this link:
    http://support.apple.com/kb/HT3819

  • I need the proper settings for Acrobate Reader 9.3 to be backward compatable to open PDF 6.0.

    I have a full license for Adobe Acrobat Professional 9. I just got off the phone with Acrobat technical support about once you install Acrobat Reader 9 to read documents online using Internet Explorer and Firefox. That it would make documents that were scanned in with CapturePerfect3.0 and a Cannon document scanner using Adobe Acrobat Professional 6.0 saved in PDF format and stored as images with records stored with Access Database front-end and SQL Server backend. Simple 6.0 PDF documents stored scanned documents in a database. O.K.! The problem is once you upgrade to read newer version of Acrobat PDF documents that our staff must read online, it makes reading saved database 6.0 PDF documents unreadable. Technical support informs me that it is a settings fix in Acrobat Reader 9 but because the Acrobat Reader 9 is a free download that can't tell me how to fix the settings.
    So here I am trying to find out the proper settings in Acrobat Reader 9 to read new Acrobat documents online and old 6.0 Acrobat PDF documents on Windows XP Pro workstations and one Windows 7 workstation of the CEO's assistant. So please help me with the proper setting for Acrobat Reader 9 to work online reading newer PDF documents and still read Acrobat 6.0 documents stored in a database.

    Adobe Reader 9 can open old and new pdf files.

  • The grace period for the Remote Desktop Session Host server has expired

    <p>I'm running Windows Server 2012, we only have 1 server and it's a DC.  I'm trying to RD to the server from my Windows 7 laptop. It was working fine on Friday but when I came in on Monday I got message saying that 'The remote session was disconnnected
    because there are no Remote Desktop License Servers available to provide a license'
    So after a bit of digging I found out my 'grace period' had expired, so ordered a new license which I got today, installed this all ok but still i cannot connect via RD I get the same message....went into the RD License Diagnoser and it said the problem
    was as follows
    'The grace period for the Remote Desktop Session Host server has expired, but the RD Session Host server has not been configured with any license servers. Connections to the RD Session Host server will be denied unless a license server is configured for
    the RD Session Host server.'
    Suggested Resolution as follows
    Configure a license server for the Remote Desktop Session Host server. If you have an existing license server, specify that license server for the RD Session Host Server. Otherwise, install RD Licensing on a computer on your network and Configure RD Session
    Host Server to use it.'
    I cannot figure out how to do this as I cannot find the RD Session Host Server tool. 
    Can any of you lovely people help me please

    Hello,
    Best option would be to assign the license server by using AD GPO. Youl will need to configure the following:
    Computer Configuration\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Licensing
    and define the settings for:
    Use the specified Remote Desktop License Server
    Set the Remote Desktop Licensing mode
    Then assign the policy tho your server.
    regards Robert Maijen

  • Looking for a remote desktop management system

    Hello,
    I am looking for a remote desktop management system which should be very user-friendly. We would prefer a open-source software for that for further customization. I have found Paragent software which seems to be looking good so far, any suggestions regarding this would be appreciated.
    Thanks in advance.
    bmora96

    How is this related to Java?
    Edited by: wpafbuser1 on Feb 22, 2008 9:22 AM

  • What's the proper protocol for a reset on my ipod touch 4g?  iOS 6 has totally jacked it up and it will no longer do anything but crash, and won't sync with itunes wirelessly or by cable.

    What's the proper protocol for a reset on my ipod touch 4g?  iOS 6 has totally jacked it up and it will no longer do anything but crash, and won't sync with itunes wirelessly or by cable.
    It's a 64G ipod touch and was fine till Apple told me to upgrade to ios 6.  Now most of my apps crash, my music won't play and I just get a white screen when I hit Music.
    When I try to sync to itunes it acts like it's going to sync and appears to recognize the ipod, but it's grayed out and has an update circle by it that spins for a while until itunes eventually freezes alltogether.  Is there a  way to go back to ios 5 after a erase and reset?

    iOS: Unable to update or restore

  • URGENT:Diagnose The Steps for Creating a Standby Database

    Why Following Steps Can Not Succeed? What are the problems?
    The Steps of Creating a Physical Standby Database
    SQL>alter system set db_recovery_file_dest_size=2000m scope=both;
    SQL>alter system set db_recovery_file_dest='C:\oracle\product\10.2.0/flash_recovery_area' scope=both;
    SQL> shutdown immediate
    SQL> startup mount
    SQL> alter database archivelog;
    SQL>alter system set db_flashback_retention_target=120 scope=both;
    SQL> alter database flashback on;
    SQL> alter database force logging;
    #The Primary Database Pfile after being edited
    # Copyright (c) 1991, 2001, 2002 by Oracle Corporation
    # SGA Memory
    sga_target=370147328
    # Job Queues
    job_queue_processes=10
    # Shared Server
    dispatchers="(PROTOCOL=TCP) (SERVICE=orcl10XDB)"
    # Miscellaneous
    compatible=10.2.0.1.0
    # Security and Auditing
    audit_file_dest=C:\oracle\product\10.2.0/admin/orcl10/adump
    remote_login_passwordfile=EXCLUSIVE
    # Sort, Hash Joins, Bitmap Indexes
    pga_aggregate_target=122683392
    # Database Identification
    db_domain=""
    db_name=orcl10
    # File Configuration
    control_files=("C:\oracle\product\10.2.0\oradata\orcl10\control01.ctl", "C:\oracle\product\10.2.0\oradata\orcl10\control02.ctl", "C:\oracle\product\10.2.0\oradata\orcl10\control03.ctl")
    db_recovery_file_dest=C:\oracle\product\10.2.0/flash_recovery_area
    db_recovery_file_dest_size=2147483648
    # Cursors and Library Cache
    open_cursors=300
    # System Managed Undo and Rollback Segments
    undo_management=AUTO
    undo_tablespace=UNDOTBS1
    # Diagnostics and Statistics
    background_dump_dest=C:\oracle\product\10.2.0/admin/orcl10/bdump
    core_dump_dest=C:\oracle\product\10.2.0/admin/orcl10/cdump
    user_dump_dest=C:\oracle\product\10.2.0/admin/orcl10/udump
    # Processes and Sessions
    processes=150
    # Cache and I/O
    db_block_size=8192
    db_file_multiblock_read_count=16
    DB_NAME=orcl10
    DB_UNIQUE_NAME=orcl10
    LOG_ARCHIVE_CONFIG='DG_CONFIG=(orcl10,stdby4)'
    LOG_ARCHIVE_DEST_1=
    'LOCATION=/arch1/orcl10/
    VALID_FOR=(ALL_LOGFILES,ALL_ROLES)
    DB_UNIQUE_NAME=orcl10'
    LOG_ARCHIVE_DEST_2=
    'SERVICE=stdby4 LGWR ASYNC
    VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE)
    DB_UNIQUE_NAME=stdby4'
    LOG_ARCHIVE_DEST_STATE_1=ENABLE
    LOG_ARCHIVE_DEST_STATE_2=ENABLE
    REMOTE_LOGIN_PASSWORDFILE=EXCLUSIVE
    LOG_ARCHIVE_FORMAT=%t_%s_%r.arc
    LOG_ARCHIVE_MAX_PROCESSES=30
    FAL_SERVER=stdby4
    FAL_CLIENT=orcl10
    DB_FILE_NAME_CONVERT='stdby4','orcl10'
    LOG_FILE_NAME_CONVERT=
    '/arch1/stdby4/','/arch1/orcl10/','/arch2/stdby4/','/arch2/orcl10/'
    STANDBY_FILE_MANAGEMENT=AUTO
    SQL> create spfile from pfile;
    RMAN> connect target
    RMAN> backup database;
    ###TheBackupHandle==C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\ORCL10\BACKUPSET\2007_11_06\O1_MF_NCSNF_TAG20071106T064915_3LZ7LRN8_.BKP
    RMAN> backup datafile1,2,3,4,5;
    C:\DocumentsandSettings\Administrator>mkdir C:\ORACLE\PRODUCT\10.2.0\ORADATA\temp\stdby4
    SQL> alter database create standby controlfile as '/temp/stdby4.ctl';
    SQL> create pfile='/temp/initstdby4.ora' from spfile;
    #Pfile Edited for The Physical Standby Database
    # Copyright (c) 1991, 2001, 2002 by Oracle Corporation
    # SGA Memory
    sga_target=370147328
    # Job Queues
    job_queue_processes=10
    # Shared Server
    dispatchers="(PROTOCOL=TCP) (SERVICE=stdby4XDB)"
    # Miscellaneous
    compatible=10.2.0.1.0
    # Security and Auditing
    audit_file_dest=C:\oracle\product\10.2.0/admin/stdby4/adump
    remote_login_passwordfile=EXCLUSIVE
    # Sort, Hash Joins, Bitmap Indexes
    pga_aggregate_target=122683392
    # Database Identification
    db_domain=""
    db_name=orcl9
    # File Configuration
    control_files=("C:\oracle\product\10.2.0\oradata\stdby4\control01.ctl", "C:\oracle\product\10.2.0\oradata\stdby4\control02.ctl", "C:\oracle\product\10.2.0\oradata\stdby4\control03.ctl")
    db_recovery_file_dest=C:\oracle\product\10.2.0/stdby4/flash_recovery_area
    db_recovery_file_dest_size=2147483648
    # Cursors and Library Cache
    open_cursors=300
    # System Managed Undo and Rollback Segments
    undo_management=AUTO
    undo_tablespace=UNDOTBS1
    # Diagnostics and Statistics
    background_dump_dest=C:\oracle\product\10.2.0/admin/stdby4/bdump
    core_dump_dest=C:\oracle\product\10.2.0/admin/stdby4/cdump
    user_dump_dest=C:\oracle\product\10.2.0/admin/stdby4/udump
    # Processes and Sessions
    processes=150
    # Cache and I/O
    db_block_size=8192
    db_file_multiblock_read_count=16
    DB_UNIQUE_NAME=stdby4
    LOG_ARCHIVE_CONFIG='DG_CONFIG=(orcl10,stdby4)'
    DB_FILE_NAME_CONVERT='orcl10','stdby4'
    LOG_FILE_NAME_CONVERT=
    '/arch1/orcl10/','/arch1/stdby4/','/arch2/orcl10/','/arch2/stdby4/'
    LOG_ARCHIVE_FORMAT=log%t_%s_%r.arc
    LOG_ARCHIVE_DEST_1=
    'LOCATION=/arch1/stdby4/
    VALID_FOR=(ALL_LOGFILES,ALL_ROLES)
    DB_UNIQUE_NAME=stdby4'
    LOG_ARCHIVE_DEST_2=
    'SERVICE=orcl10 LGWR ASYNC
    VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE)
    DB_UNIQUE_NAME=orcl10'
    LOG_ARCHIVE_DEST_STATE_1=ENABLE
    LOG_ARCHIVE_DEST_STATE_2=ENABLE
    REMOTE_LOGIN_PASSWORDFILE=EXCLUSIVE
    STANDBY_FILE_MANAGEMENT=AUTO
    FAL_SERVER=orcl10
    FAL_CLIENT=stdby4
    C:\Documents and Settings\Administrator>oradim -new -sid stdby4 -startmode manual
    Create Listener and Network Service Name for Standby Database.Stop and start listener(not need)
    SQL>create spfile from pfile='/temp/initstdby4.ora';
    C:\Documents and Settings\Administrator>set oracle_sid=stdby4
    SQL> startup mount;
    ORA-01078: failure in processing system parameters
    LRM-00109: ???????????????? 'C:\ORACLE\PRODUCT\10.2.0\DB_10\DATABASE\INITSTDBY4.ORA'
    Message was edited by:
    frank.qian
    Message was edited by:
    frank.qian

    you have now two different pfiles: one in c:\temp\initstdby4.ora. and %ORACLE_HOME%\database\initstdby4.ora.
    You are using the latter, as you didn't specify pfile= in your startup mount.
    Also, if you are using a spfile, the only line in a pfile should be: spfile=....
    In your pfile you are mixing up Unix like file locations with \ and Windows file locations with /
    Could you please read the docs
    more closely
    more closely
    more closely
    and work
    more carefully
    more carefully
    more carefully
    It is very simple, but you must work carefully.
    Sybrand Bakker
    Senior Oracle DBA

  • How to determine the proper size for Oracle 8i Data Base Objects

    Hi,
    I'm working on an Oracle 8i Data base. I'd like to know how to determine the proper size for the Data Base objects such as tables, datafiles, tablespaces...
    Thanks.

    Start with the docs.
    http://download-west.oracle.com/docs/cd/A87860_01/doc/server.817/a76956/schema.htm#949
    Best Regards
    Krystian Zieja / mob

  • Completely different AMF request packets for same remote service call from Flex to PHP using ZendAMF

    I was trying to debug why one of the remote-services in our Flex application was failing randomly. What I found was interesting. Completely different AMF request packets were sent for same remote service call from Flex to PHP.
    When the service call succeeds the AMF request packet looks like the following:
    POST /video/flex/bin-debug/gateway.php HTTP/1.1
    Host: localhost
    User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.15) Gecko/20110303 Firefox/3.6.15
    Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
    Accept-Language: en-us,en;q=0.5
    Accept-Encoding: gzip,deflate
    Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7
    Keep-Alive: 115
    Cookie: PHPSESSID=j6u30i8uu6c3cvp8f4kipcpf05
    Referer: http://localhost/video/flex/bin-debug/main.swf/[[DYNAMIC]]/5
    Content-type: application/x-amf
    C    ontent-length: 305
    Flex Message (flex.messaging.messages.RemotingMessage)     operation = getMemberFromEvent    clientId = 2F997CD0-7D08-8D09-1A9B-0000422676C8    destination = MembereventService    messageId = B46AB58D-2241-83F0-41E4-9FE745565492    timestamp = 0    timeToLive = 0    body =     [      280    ]    hdr(DSId) = nil
    And when the service fails the AMF request packet looks like this:
    ServiceRequest: getMemberFromEvent; RemoteService; getMemberFromEvent
    (mx.messaging.messages::RemotingMessage)#0
      body = (Array)#1
        [0] 250
      clientId = "1AA4FAAB-AEA5-8109-4B0D-000002B3A9A1"
      destination = "MembereventService"
      headers = (Object)#2
        DSEndpoint = (null)
        DSId = "nil"
      messageId = "2F92E6C0-FE92-A09B-B150-9FE2F28D9738"
      operation = "getMemberFromEvent"
      source = "MembereventService"
      timestamp = 0
      timeToLive = 0
    Also, following is the error message on Flex when the service fails:
    {Fault code=Channel.Call.Failed, Fault string=error, Fault detail=NetConnection.Call.Failed: HTTP: Failed, Destination=MembereventService}
    We are using Swiz as the micro-architecture for Flex development and Zend AMF for remoting between Flex and PHP.
    Any ideas what is wrong here, what is causing Flex to send different request packets for the same service & what I can do to fix it?

    Hi, I know that your post is almost 5 years ago, but have you found the solution to this issue?
    Thanks.

  • Processing data for a remote command failed with the following error message: Error occurred during the Kerberos reponse.

    Hi!
    We have 5 Exchange 2013 servers and when I’m trying to run a script that includes the cmd-let Get-MessageTrackinglog with StartDate = the first of the month and with EndDate = the end of the month I get the following error message after
    a couple of hours. The script is run on the server SERVER01 and goes through the Message Tracking logs of all Exchange servers. I have tried the script on other servers and get the same result.
    Processing data for a remote command failed with the following error message: Error occurred during the Kerberos reponse.
    [Server=SERVER01, TimeStamp = 918/2014 19:32:34]
    For more information, see the about_Remote_Troubleshooting Help topic.
        + CategoryInfo         
    : OperationStopped: (server01.domain.com:String) [], PSRemotingTransportException
        + FullyQualifiedErrorId : JobFailure
        + PSComputerName       
    : server01.domain.com
    I have gone through “about_Remote_Troubleshooting Help topic”, but can’t find anything related to my issue. There is nothing in the Application or the Windows PowerShell log either.
    /Henrik

    Hi Henado 
    Check the time on your Exchange server(s) relative to the DCs and ensure they are in correct sync
    Use another account which is assigned the Organization Management permission and log to to the server run the command in shell and see the results
    Run 
    Add-PSSnapin -Name Microsoft.Exchange.Management.PowerShell.E2010
    Set-Adserversettings -ViewEntireForest $True and then run message tracking command and see the results
    If none of the above helps you may need to remove and re-install the WinRM and see the results
    Good Luck :)
    Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

  • What is the required internet bandwidth for Endeca Web Acquisition Tool

    Hi,
    What is the required internet bandwidth for Endeca Web Acquisition Tool.
    Regards,
    Suresh.

    I would expect the tool to work within the constraints of the bandwidth available.  Low bandwidth = slow acquisition.

  • TS3938 When I went to the Quicken site I was routed to a third party tech company that asked me to download a software that allowed them to access my computer for a remote session to fix my computer.  Is that a scam?  I did not do it but how do I get my Q

    When I went to the Quicken site I was routed to a third party tech company that asked me to download a software that allowed them to access my computer for a remote session to fix my computer.  Is that a scam?  I did not do it but how do I get my Quicken 2007 to work with Mountain Lion?

    old diane wrote:
    When I went to the Quicken site I was routed to a third party tech company that asked me to download a software that allowed them to access my computer for a remote session to fix my computer.  Is that a scam?  I did not do it but how do I get my Quicken 2007 to work with Mountain Lion?
    Ahhh, I see that you did not allow them to connect (is this true)
    Here is a link to the Lion/Mountain Lion compatible version of Quicken.
    http://quicken.intuit.com/personal-finance-software/quicken-2007-osx-lion.jsp

Maybe you are looking for