Proper settings for my mini and my Panavision Plasma?

Today I got a brand new Mac mini. I had hoped to connect via HDMI to my 46" 1080P Panasonic Plasma. Unfortunately I was short an HDMI port. Fortunately my TV came with a VGA port. So I picked up an adapter from Apple (mini DVI to VGA) and I'm in business.
In Display settings when I choose "Detect Settings" nothing seems to happen. The default display setting seems to be 1024 x 768 at 60 hz. Knowing that I have a 1080P I decided to try the only setting that appeared on the list that ended in 1080P (1920 x 1080P at 60 hz) and the screen went blank.
So back to 1024 x 768 the picture looks okay. It's very slightly fuzzy. Maybe it would better to use the word 'Soft' instead of fuzzy. But I'm sure my TV is capable of much more.
So the big question is, what is the native resolution of a 1080P plasma? What settings should I be using? Shouldn't my mini auto detect the proper setting?
Thanks,
Bear
Message was edited by: Bear23

I'm having a tuff time determining the stated resolution using a pc input. Being a geek, first I searched for my models manual. I found a manual for the same model only 42" instead of my TVs 46". And in that manual I found the max res from the PC input is 1280 x 1024.
So I got my fat A_s out of the chair and checked my own PAPER manual hoping that the larger screen might have a different max res. Well my manual was made on the CHEAP. It's missing about half of the info of the one I found online at Panasonic. NO WHERE in the manual does it list any resolutions for use by the PC input. Further my specific model is not even listed on the Panasonic website. Apparently I own a red headed step child.
No haven't yet plugged 1280 x 1024 into the settings. I still don't understand why my TV is not auto detected. But now I'm reconsidering purchasing an HDMI hub. I guess I'll have to sleep on it.
Bear

Similar Messages

Size settings for swing components and resizing of a JFrame

Hi all!
I'd have the following question:
There is a JFrame, which content panel has the GridBagLayout. In some places on that layout's grid there are JScrollPanels (let's name each as "inner panel") with JTables in the view ports.
When user resizes the main JFrame, I'd like that all inner panels and corresponding tables would resize synchronously: if user enlarges the main JFrame, then the sizes of all those components should increase proportionally, when user makes the main JFrame smaller, then all the sizes should become proportionally less.
I am confused with the settings for max, min and preffered sizes for inner panels as well as for their JTables. I have read about those size attributes and tried to play with them, but I can't obtain the needed result :-/
Each inner panel has the "BOTH" value for the fill attribute in the GridBagLayout's constraints.
Might someone help me?
Thanks in advance!

Hmm...
The JPanel that contains all stuff is the JFrame's content pane...
The entire JFrame's content pane contains another panels (JScrollPanels), which are all set to fill all available space on the parent panel (JFrame's content pane) with "both" value of the "fill" attribute.
Should I put the only one JPanel on the JFrame's content pane and all other stuff at that additional JPanel...?

Hello All... Back after a brief absence, things look a little bit different. I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I'v

Hello All...
Back after a brief absence, things look a little bit different.
I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I've tried using Sorenson 3 (15 frames, key frames set to automatic, 320 x 240) for video and IMA 4:1 (mono) for audio. The resulting video looked great but the file size came in at about 255 Mb.
Thanks!
PowerMac G5 1.8 Dual Mac OS X (10.4.3)
Message was edited by: Dan Foley

Thank you for the replies. Everyone was correct about the jack, interface, and phasing problems. I have been unplugging my motu audio interface and then using headphones at work. I have not changed any detailed audio output settings in logic. When I read that the jack might be a problem I tried switching headphones. This actually helped. I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems. I can use these headphones with other devices but not the mac. I have to use ipod ear buds and the phasing seems fixed. Hopefully this information is helpful to someone else.
If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio.

Strange info in "Bypass Proxy Settings for These Hosts and Domains"

For my Mac Mini my Network IP Address always has a self-assigned 169.254 number that I cannot change. Strangely, this same IP number is similar to info that is in the Proxies section (of Network Settings) under "Bypass Proxy Settings for These Hosts and Domains".
No matter what I do, this info (*,local, 169.254/16) appears in my Network Settings in the Proxies section under "Bypass Proxy Settings for These Hosts and Domains". (I tried removing the info and it would cause the "Configure Proxies" selection to default to "Always Use PAC File". Had to go back and retrash all the plist files to have Proxies go back to "Configure Proxies-Manually". Still, the info (*,local, 169.254/16) continues to appear in the "Bypass Proxy Settings for These Hosts and Domains" section and my IP address is always a 169.254 number.)
Comcast cable modem via direct hardwired Ethernet works fine with my other computer, so not the modem. Also, other computer does not have any info in the "Bypass Proxy Settings for These Hosts and Domains" section.
Installed a fresh copy of OS X 11.5 on a new hard drive. Still the same problem.
I posted this issue before but only got one responder and the problem still exists. Any clues? Somebody must know about this stuff. Help please.
Thanks

When your Mac wakes up, it does not yet have an IP Addresss. It wants to send a request to a Router for an apprpriste IP address to use now. But it needs to have an IP address (like a return address) to receive any messages. So, ... wait for it,
... it (your Mac) makes one up. There are rules that ensure it is a random address, but they always start with 169.254. It is on the same subnet with any low-order 16 bits This is the "self-assigned" range of IP Addresses. This address is only good for talking on a local network segment, for things like asking for a valid IP Address from a DHCP-enabled Router.
In most cases, on most networks, the 169.254 self-assigned IP Address is replaced by a valid Local IP Address such as 192.168.xxx yyy or 10.0.xxx.yyy so quickly that you never even see the 169.254 Address.
If you do see the 169.254 Address, it can be read as "Nobody will talk to me" or "Nobody will give me an IP Address". When you have this IP Address for more than an instant, you should suspect bad cables for Ethernet connections, bad signal strength or interference for wireless, Router configuration problems, or Mac configuration problems.
Mac configuration problems are often solved by using the "Assist Me" button is System Preferences > Network and choosing to set up again.
Another diagnostic is to try using Network Utility and the Ping function, and Ping-ing the address of your Airport base Station, often 192.168.0.1 or 10.0.0.1 or similar. This will tell you if the Router is reachable, or there are cabling/wirelss signal problems.
In this case, proxies are not an issue, and are simply a distraction from the real problems.

My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

I have an ipod touch 4g it was just Fine and today i tried to plug it to my laptop to sync music and it suddenly turned off and it didn't work for 15 mins and then it worked but i can no longer sync apps or music plz help me as soon as you can

I have an ipod touch 4g it was just Fine and today i tried to plug it to my laptop to sync music and it suddenly turned off and it didn't work for 15 mins and then it worked but i can no longer sync apps or music plz help me as soon as you can

If you have not taken the iPod apart, Apple will exchange it for a refurbished one for $99. You can do it an an Apple store
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Or sent it to Apple

After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?

After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?Problr

Dear All
i have done the same activity ( buy a new iphone 4 -> upgrade to ios5 - > configure email) with success-
than when i start to move the contacts from old mobile to iphone (using the microsim) i receive the same crash
in disgnosis e use i saw 2 dump with this title 'latestCrash-Preferences.plist and LatestCrash.plist. in each file the date is the same and i read:
Exception Tyle: EXC_CRASH (SIGABRT)
Exception code: 0x00000000, 0x00000000
Chrashed Thread: 6
in thread 6: name: Dispatch queue:
com.apple.addressBookUI.ContactsSettingPlugin
and thaan a lot of data.
Have you any idea?
thank in advance
Fabio

My computer wont power up. I have unplugged it for 30 min and replugged but it will still not power up. Can I try something else? cant get an appt until Tuesday.

My computer wont power up. I have unplugged it for 30 min. and replugged and it still will not power up. I cant get an service appt until Tuesday. Is there something else I can do?

Until Tuesday, the only thing you might try, if you already have and didn't state that you did, if this is the same outlet that you have used, and suddenly you lost power, try plugging your computer into another outlet and see if that works. If it works, either try another appliance in the outlet you are having trouble with, or check to see if a breaker has tripped.
If that doesn't work, well...you will just have tro wait until Tuesday.
Wish you the best of luck

"current encoder settings for bit rate and sample rate are invalid" message

I have some files I am working with. Details and what happened:
Had some music files where I was doing some trimming/splitting. Files worked fine in itunes.
Open the files in Quicktime Pro 7 to trim them. Exported to aif.
Opened the files with itunes. They open and play just fine.
In Itunes I click"create AAC version" to convert them.
I receive the message "An error occurred while trying to import the file. The current encoder settings for bit rate and sample rate are not valid for this file."
I don't know what to do from here. Suggestions?
Thanks.

Make sure that the AIFFs that you export are set for 16 bit PCM.
Also, assuming that you are using 44.1 kHZ sampling in your AIFFs, make sure that you are not trying to use 48 kHz in the AAC.

Making system settings for measurement documents and measuring point

What is the significance of making system settings for measurement documents and measuring point in spro?
Edited by: Pallavi Kakoti on Jul 14, 2011 1:23 PM

Hi,
<< Moderator message - Cut and paste response from http://www.consolut.com/en/s/sap-ides-access/d/s/doc/YY-OLI0IMRCCUST removed. Plagiarism is not allowed in SCN >>
Regrds
Jitender
Edited by: Rob Burbank on Jun 6, 2011 10:53 AM

[svn:bz-trunk] 10631: Proper fix for BLZ-343 and LCDS-1153.

Revision: 10631
Author:   [email protected]
Date:     2009-09-28 05:23:42 -0700 (Mon, 28 Sep 2009)
Log Message:
Proper fix for BLZ-343 and LCDS-1153.
Refactored the common logic for AMF0 and AMF3 back into AbstractAmfInput. Resolving class aliases, creating and registering a property proxy and instantiating the appropriate class are now handled in the superclass. The resolved className and the proxy are 'returned' to the subclasses via a holder array created in the subclasses and sent as a parameter.
blazeDS checkintests pass
lcds-trunk checkintests pass with the new flex-messaging-core.jar
lcds-trunk alltests-dataservice pass with the new flex-messaging-core.jar
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-343
    http://bugs.adobe.com/jira/browse/LCDS-1153
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/io/amf/AbstractAmfInput.java
    blazeds/trunk/modules/core/src/flex/messaging/io/amf/Amf0Input.java
    blazeds/trunk/modules/core/src/flex/messaging/io/amf/Amf3Input.java

Can't subscribe for 120 mins and 90 rupees per month for calling to India

I want to subscribe for 120 mins and 90 rupees PER MONTH for calling to India but when I select this subscription the only options it gives me are 120 mins and 256.50 rupees for 3 months and 120 mins and 918 rupees for 12 months. I don't want to spend extra money for 3 or 12 months. I need it only for 1 month. Please don't tell me this is not an option. How can I fix this??

Its best to phone up and explain clearly what you want.
You will be calling the UK, but as we have such a diverse multiracial population you can still have trouble
To be honest I have trouble when I ring most call centres, some do have some very broad regional accents.
toekneem
http://www.no2nuisancecalls.net
(EASBF)

HT2101 my i phne was exposed to a little water and then i put it under a table lamp to ensure ebvaporation of water . During this the phone was switched off. Later when i turned the phone n , it worked pine for 5 min and then the temp alarm came. Need hel

Hi my iphone showed signs of moisture in camera area and so i kept it under a table lamp for a few hrs after switching off the phone. Later the moisture was gone so i switched on the phone and after 5 min of perfect operation an High temp alarm came. Every time i switch off the phone works fro 5 min and ten gets the alarm. How can i get my phone back to normal?

Thanks for the reply, just being positive as the phone turns on fine and every thing works ok for 5 min and then the temperature alarm comes on. I am hoping that the issue may be limited to a perticular temperature sensor etc.
I have got the phone opened and there was little water signs that have been cleaned with alcohol but the issue remains the same. I believe that the temp alarm is caused due to the phone being kept under the table lamp which raised the phones temp beyond the acceptable range and hence may be damaged one of the temp sensors. Heard that there are around 5 different temp sensors in the iphone. If any one has more knowledge please advise on how i can get this fixed.Thanks.

I have a datetime axis stuck on 1970 for both min and max..

I have a datetime axis stuck on 1970 for both min and max..
The lineseries dataprovider has an array collection with objects
with each object having a dateAdded2 attribute of format mm/dd/yyyy
and the dates are in this year 2008. the objects also have an
attribute called amount which is a number.
eg
object.dateAdded2 = "07/14/2008"
object.amount =5
Anyone with any idea what is going wrong? Similar type of
data works fine in my other charts.

Pull the CPU cover and look for leaks from the LCS.
If the gray mat is wet, the LCS has leaked and the machine will soon be dead.
PowerMac G5 Coolant Leaks/Repairs
PowerMac G5 Coolant Leak Repair/Overhaul (w/photos)

TS1717 when trying to import cd the following message appears "the current encoder settings for bit rate and sample rate are not valid for this file"?

Trying to import cd when this message appears "the current encoder settings for bit rate and sample rate are not valid for this file". Any suggestions?

Thanks so very much. I chose MP3 and Download and it is working beautifully. Have a wonderful day and it is so nice of you to get right back to me. I'm trying to cut a DVD for my grandson's grad party and I got most of the photos and didn't have any music since I lost everything in a clean install. Could hug you!

Proper settings for my mini and my Panavision Plasma?

Similar Messages

Maybe you are looking for