Proper upgrading method right from downloading device software & desktop software in pc to update in device?

Plese tell proper method of installing new os in bb.
Sometimes desktop software & apploader don't detect new os to be instal on bb
Is it necessary to have internet connection for the process after downloading &
Installing new os in pc?

Hi Kamalsinghengr
If you want to update your device OS you can do that , But first Uninstall or delete any OS pack you have installed previously on your PC ,Then follow this :
1. Download the latest OS you desire from here and Install it in your PC Latest Software Download for Redington (India) Limited for Curve 9360
2. Download and install the latest BlackBerry desktop software from here BlackBerry desktop software
    Then using desktop software perform your full backup of your device.   
From here you have two Options :  
3 ( a) . Go to C:\Program Files\Common Files\Research In Motion\AppLoader. (For 64-bit Vista or Windows 7, the path       will be C: > Program Files x86 > Common Files > Research In Motion > AppLoader) double click Loader.exe
 Or 
  ( b ) . Connect your device and run BlackBerry Desktop Software you will notice the Update available , just Click to update your device OS. (  During those precess you don't need any internet Connection )
      Upgrade will continue then After Installation of New OS restore your backup from BlackBerry desktop
Software.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Similar Messages

  • If I upgrade to ios 7 right from my device (not itunes) will I loose my pictures, apps and info

    If I upgrade to ios 7 right from my iphone (not through itunes) will my pictures, apps and other info get automatically erased?

    It shouldn't, but you should update your iPhone's backup immediately beforehand.
    And a good idea to import the photos/videos in the Camera Roll with your computer beforehand to be on the safe side.
    http://support.apple.com/kb/ht4083

  • Recommended upgrade method from ECC5 to ECC6 for lowest production downtime

    Hello everybody,
    I've been looking through multiple documents concerning a system upgrade and I am still unable to figure out the recommended method for upgrading a system with minimum downtime.
    My scenario requires that tests as rigid as possible will be performed and that development will be halted for the shortest time possible , therefore development must be continued after the initial upgrade.
    We are currently debating the required way to do this - what should be done with the change requests that currently reside in the DEV system, in which steps the incomptabilities are fixed and so on.
    I've decided that I'll share my thoughts with you and maybe you guros will be able to point out mistakes in the methodology.
    1. ECC 5 Production System is copied aside, lets call this system EPC
    2. Change requests from DEV ECC5 are copied to this EPC System.
    3. EPC  system is upgraded to ECC6.
    4. Bugs and incomptabilities such as unicode incomptabilities are fixed and merged in a change request
    This ends the preperation step and in my opinion is sort of a preperation step.
    During the whole preparation step, which to my estimate could take at least one month, development in the original system must be continued, so this is my main trouble.
    What is the recommended procedure from here?
    I assume that another production must be done on the day of the actual upgrade start, then the fixes from the previous preperation system are copied to this actual ECC6 Production, but I am rather lost as far as it goes to having an ECC6 Dev with most current change requests.
    I would appreciate any hints and help,
    thanks in advance,
    Eli.

    Ok, your idea of having a production copy for development and tests is a good upgrade strategy, we have done this twice due high quantity of developments and configuragion changes but I don´t see why you wrote " copy change requests from DEV to EPC " your whole configuration, programs, etc, are already in EPC once you copy the system.
    In this scenario every change made in DEV ECC 5.0 must be also replicated and tested in EPC 6.0 because you cannot use the change requests from 5.0 in 6.0 once in productive upgrade, let me list the global steps:
    1.- Homogeneous system copy from PRD to EPC, you will get a working test platform
    2.- Upgrade EPC to 6.0
    3.- Developers and functionals will do all respective changes and generate chage requests.
    Once EPC is ready
    4.- Upgrade DEV system to 6.0 transport change requests created in EPC to upgraded DEV, from this point you should only do emergency changes using Q&A system.
    5.- Upgrade Q&A system, transport change requests from DEV, no changes are permited from now until PRD is upgraded.
    6.- Do all tests very carefully
    7.- Upgrade PRD transport change requests
    Then you are ready. the downtime can be tune trough EPC, DEV and Q&A systems so you can determine what you shoud do to assure the shortest method.
    I recomend you to use the downtime minimized upgrade method and from every upgrade take a deep look at the upgrade report generated after the whole process is completed.

  • I have reset my Mac password, but still am not able to download new software due to unrecognized password!!

    Please help me reset my password to "set-up." I have already reset my Apple password, but am still not able to download new software.

    Are you the administrator on  the macbook and are you the only account? In system preferences-system accounts,. You have all the users for the macbook. At the top you have password and login. you should be in password. On the left is the accounts. You should click on the one that is the administrator account. On the right is a bar that says change password. You click on that. It will go to another screen wear you enter your old pasword and then you new password. Then verify, then add hint if you want . Then click change. Do you see a little box with a key in it beside the enter new passward, that is for keychain. Your admin. password and keychain passwords have to match. That lets you download and open accounts, do updates ect. Doing this way sets admin and keychain pasword. If you keychain password is different than you admin password, that will stop you from downloading new software. Go to apple -support and beside support in search type in KB/h1631 then hit return. That explains keychain an how to change it if you have to.

  • I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows 8?

    I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows

    Hi, stig2013. 
    I would recommend the steps in the article below.  See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If you are receiving an error message, find the exact error number that you recieved in the article below and process the steps. 
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if you manually disconnect the device during the restore process. You can resolve this issue by using USB troubleshooting, using a different Dock Connector or Lightning Connector to USB cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
    Cheers,
    Jason H. 

  • Hi, I am trying upgrade to Snow leopard 10.6.8 from 6.3(trying to install Lion). After downloading the software i m getting a message "can not install on the HD, install 6.5 before proceeding further. I coud not understand. Any suggestions, I appreciate.

    Hi, I am trying upgrade to Snow leopard 10.6.8 from 6.3(trying to install Lion). After downloading the software i m getting a message "can not install on the HD, install 6.5 before proceeding further. I coud not understand. Any suggestions, I appreciate.

    install 6.5 before proceeding further. I coud not understand.
    Just what it says - install os 10.6.5 before proceeding further.  You can either do so through Software Update or use the Combo update from Apple's download site.
    You should repair permissions and restart your computer prior to updating and upgrading.

  • HT201365 I just downloaded IOS 7. In my old software if I wanted to get to spotlight to find something I just scrolled from left to right from my home screen. That doesn't work now...so how the heck to I get to spotlight with this new system???

    I just upgraded to IOS 7. Prior to that upgrade if I wanted to get to spotlight search I just scrolled left to right from my home page and got it. Now...that doesn't work. How do I get to spotlight/search with IOS 7? Sheesh...why change such an easy basic thing anyway??? Can someone let me know please.

    Now, you get to Spotlight by swiping down from the home screen, but do not start the swipe at the top of the screen.  Start it in the middle somewhere.

  • I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto '09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn't need it). I am totally happy with the

    I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto ’09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn’t need it).
    I am totally happy with the way iPhoto organizes my photos and how I can work with iMovie to create slide shows with music from iTunes, etc.
    I have been shooting mostly high resolution jpegs and I continue to learn more and more about photography, post processing etc. I realize that the small adjustments I can make in iPhoto are good, and are adequate most of the time. However, a have started to experiment with shooting RAW images and would like to go the next step, ie. post processing.I am totally technically challenged and need SIMPLE, INTUITIVE programs and am certainly NOT anywhere ready for Photoshop CS whatever!
    After having these programs sit on my computer, I decided to try to see if I could figure them out. When I opened Aperture, this is what first comes up.
    “Welcome to Aperture 3.2
    Your library needs to be upgraded to work with this version of Aperture. Once upgraded, you will not be able to use this library with previous versions of Aperture.
    Upgrading a library from previous versions of Aperture 3 generally takes a few minutes or less, though larger libraries will take longer. After that, Aperture 3.2 will upgrade your library's thumbnails, but you can use the application during that time.
    Tip: To open a different library, quit Aperture and hold the Option key down while starting Aperture
    Current Library Location:
    Jadzia (home)   -----Pictures------Aperture Library
                                                      QUIT             UPGRADE”
    I have heard horror stories  about moving your entire library to Aperture, ending up with 2 libraries, etc. etc. hence my previous reluctance in attempting Aperture. In addition, many of my photography friends are saying: Go with Lightroom 3.....you’ll love it!
    So here is my dilemma.  I don’t want to mess around with my iPhoto library. All I want to be able to do, is to isolate a few photos, export them to Aperture, Elements, and work on them there, then bring them back into iPhoto.
    Can I do this? Should I forget about Aperture and Elements and look at purchasing yet another program like Lightroom?

    Export those few photos via the File ➙ Export ➙ File Export menu option with Kind = Original to the Desktop.  Then import them into the Aperture library. That would keep one copy in your iPhoto library and another in your Aperture library to edit, etc.
    You can use Photoshop Elements 9 from within iPhoto as your editor of choice. However, if you edit a raw file in iPhoto with PSE9 the resulting edited version must be saved outside the iPhoto Library and imported back in as a new file.  For editing jpegs just do a Save (not a Save As) and it all will be kept within iPhoto. 
    Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
    1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
    2 - double click on the thumbnail in iPhoto to open it in Photoshop.  When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done. 
    3 - however, if you get the navigation window
    that indicates that  PS wants to save it as a PS formatted file.  You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
    This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
    NOTE: With Photoshop Elements  the Saving File preferences should be configured as shown:
    I also suggest the Maximize PSD File Compatabilty be set to Always.  In PSE’s General preference pane set the Color Picker to Apple as shown:
    Note:  to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
    OT

  • As I downloaded new software upgrade in my iPod nano 7 th gen and also new iTunes upgrade then all data on my iPod got erased and now when I am trying to sync it again then sync button is disabled on the windows screen . Kindly help

    As I downloaded new software upgrade in my iPod nano 7 th gen and also new iTunes upgrade then all data on my iPod got erased and now when I am trying to sync it again then sync button is disabled on the windows screen . Kindly help

    From the OP: "My old computer got a virus and when that happened all my music was lost. "
    They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod.

  • HT201210 TRIED UPGRADING OLD IPHONE FROM SOFTWARE 3.0 BUT NOW ONLY SHOWING SLIDE FOR EMERGENCY.HELP

    tried upgrading iphone 16gb from software 3.0 but now only showing slide for emergency.help

    Connect in recovery mode, explained in this article: iPhone and iPod touch: Unable to restore , then choose "restore" when you right click on your device in the device list and set it up "as new device" How to set up your iPhone or iPod touch as a new device

  • Want to configure a GPO "Stop (domain) users [having admin rights] from installing software"

    Want to configure a GPO "Stop (domain) users [having admin rights for some particular users]  from installing/uninstalling software"
    Requirements :-
    1. Domain user should not be allowed to install/uninstall any software's. Rest all the actions can be performed by the user like an administrator can do.
    Please suggest if possible then how can I implement the same.

    Hi Amar Chand,
    You can do so by using certain Group Policy settings to control the behavior of the Windows Installer, prevent certain programs from running or restrict via the Registry Editor. The Windows Installer, msiexec.exe, previously known as Microsoft Installer,
    is an engine for the installation, maintenance, and removal of software on modern Microsoft Windows systems.
    You can try the following method to resolve this issue:
    Method 1: Disable or restrict the use of Windows Installer via Group Policy
    Open “GPMC”, create a GPO linked to the correct scope. You can refer to this article
    Create a new Group Policy object.
    Right-click it, click Edit, and then navigate to
    Computer Configuration/Policies/Windows Components/Windows Installer.
    In RHS pane double-click on Disable windows installer.
    Click Enable and configure the option as required. "Always "option indicates that Windows Installer is disabled.
    This setting affects Windows Installer only. It does not prevent users from using other methods to install and upgrade programs.
    Click Apply to save this configuration.
    Run gpupdate /force on the clients. 
    For your information, please refer to the following article to get more help:
    Managing options for computers through Group Policy
    http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/sag_wininstall_group_policy_computers.mspx?mfr=true
    Method 2: Restrict Programs from being installed via Registry Editor
    Open Registry Editor and navigate to the following key: HKEY_CURRENT_USER\Software\Microsoft\Windows\Current Version\Policies\Explorer\DisallowRun
    Create String value with any name, like 1 and set its value to the program’s EXE file.
    e.g., If you want to restrict msiexec, then create a String value
    1 and set its value to msiexec.exe. If you want to restrict more programs, then simply create more String values with names 2, 3 and so on and set their values to the program’s exe.
    Note: You may have to restart your computer.
    In addition, if you choose this method, you could deploy the registry configuration via GPO. Please refer to the following article:
    Configure a Registry Item
    http://technet.microsoft.com/en-us/library/cc753092.aspx
    Regards,
    Lany Zhnag

  • I'm using a Mac.  I "upgraded" to LR5 from LR4.  I do not want to be a member of the "Creative Cloud".  I just want to use the software I purchased, specifically to upload to my SmugMug account.  Is there a way to use an add-on to do this?  Aperture and L

    I'm using a Mac.  I "upgraded" to LR5 from LR4.  I do not want to be a member of the "Creative Cloud".  I just want to use the software I purchased, specifically to upload to my SmugMug account.  Is there a way to use an add-on to do this?  Aperture and LR4 were easy but I'm finding it impossible without subscribing to CC.

    Sorry, maybe I don't understand, but why do you feel compelled to subscribe to CC if you already have a permanent Lightroom 5 licence?
    For the SmugMug plugin, a simple Google search ("smugmug lightroom plugin") gives this link to download the plugin:  http://help.smugmug.com/customer/portal/articles/121321
    Another way is to click the button "Find more services online..." in the the Publish Service section of Lightroom, and to search for SmugMug in the Adobe Add-ons portal; you will find a link to the latest plugin: https://creative.adobe.com/addons/products/1755

  • Error while downgrading from ios6(beta4) to ios5.0.1.. i am getting error "there was a problem downloading the software for the iphone" any idea???

    Hi,
        I tried to downgrade my iphone4s os from ios6 (beta 4) to ios 5.0.1(factory settings).
    but all the time i am getting the following error.
    "there was a problem downloading the software for the iphone "rams's iPhone" "
    pls help me to downgrade my device.
    I am from india, ios6 maps are not at all working for india so i want to go for old version so that i can have google maps.
    Regards
    Ram

    You couldn't go back to 5.0.1 even if you wanted to, it would have to be 5.1.1 but if you had a signed copy of the iOS 6 beta on your iPhone I don't believe you can go back.
    You can try Google to see if you can find a workaround. Despite the map issue, if you are a developer don't you need the Beta on your iPhone?

  • I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes:Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufac

    I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes: Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufacturer for assistance. I am on a MacBook pro running 10.5.8 OS. Has anyone seen this before and how can I get it resolved.
    Thanks for your help in advance....

    Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
    Thanks!

  • I would like to send pics from my windows computer to my iPhone using bluetooth. I had it paired but somehow it cannot the download the software and is asking to usa a disk instead. Where or how can I download the software available for that, please reply

    I would like to send pics from my windows computer to my iPhone using bluetooth. I had it paired but somehow it cannot the download the software and is asking me to usa a disk instead. Where or how can I download the software available for that, please reply... thaks. (",)

    Bluetooth file transfer has never been supported with iOS devices.

Maybe you are looking for